Fluid catalytic cracking (FCC) salty wastewaters, containing quaternary ammonium compounds (QACs), are very difficult to treat by biochemical process. Anoxic/oxic (A/O) biochemical system, based on nitrification and d...Fluid catalytic cracking (FCC) salty wastewaters, containing quaternary ammonium compounds (QACs), are very difficult to treat by biochemical process. Anoxic/oxic (A/O) biochemical system, based on nitrification and denitrification reactions, was used to assess their possible biodegradation. Because of the negative effects of high salt concentration (3%), heavy metals and toxic organic matter on microorganisms’ activities, some techniques consisting of dilution, coagulation and flocculation, and ozonation pretreatments, were gradually tested to evaluate chemical oxygen demand (COD), ammonia-nitrogen (ammonia-N) and total nitrogen (TN) removal rates. In this process of FCC wastewater, starting with university-domesticated sludge, the ammonia-N and TN removal rates were worst. However, when using domesticated SBR’s sludge and operating with five-fold daily diluted influent (thus reducing salt concentration), the ammonia-N removal reached about 57% while the TN removal rate was less than 37% meaning an amelioration of the nitrification process. However, by reducing the dilution factors, these results were inflected after some days of operation, with ammonia-N removal decreasing and TN barely removed meaning a poor nitrification. Even by reducing heavy metals concentration with coagulation/flocculation process, the results never changed. Thereafter, by using ozonation pre-treatment to degrade the detected organic matter of di-tert-butylphenol and certain isoparaffins, COD, ammonia-N and TN removal rates reached 92%, 62% and 61%, respectively. These results showed that the activities of the microorganisms were increased, thus indicating a net denitrification and nitrification reactions improvement.展开更多
The wastewater from hollow titanium silicate (HTS) zeolite consists essentially of high concentrations of COD and salt, and low ammonia-nitrogen concentrations (or high, sometimes). These chemical pollutants are produ...The wastewater from hollow titanium silicate (HTS) zeolite consists essentially of high concentrations of COD and salt, and low ammonia-nitrogen concentrations (or high, sometimes). These chemical pollutants are produced in very large quantities during oil refining and are very difficult to manage on site. In addition, they can be very harmful to the environment when released without any treatment. The aim of this study is to evaluate, on the one hand, the feasibility of removing the COD from HTS wastewater using a sequencing batch reactor (SBR) and, on the other hand, to test the combined effect of nitrification and denitrification under different conditions of treatment on the elimination of Total Nitrogen (TN) from HTS wastewater containing a high concentration of ammonia-nitrogen. SBR intermittent domestication tests of sludge have been successfully carried out with wastewater from a municipal treatment plant with a COD removal rate of 87%. Subsequently, HTS wastewater containing high concentrations of COD was treated by this SBR system. After three months of operation, the efficiency of COD elimination fluctuated between 47% and 67%. Therefore this result could serve as a precursor to a possible second COD bioprocessing. The results obtained during nitrification of the same HTS molecular sieves wastewater with low C/N ratio gave, under an operating temperature below 10°C (winter conditions), less than 16% of total nitrogen (TN) removal. When the temperature was increased to 40°C, the TN removal efficiency remained worse. These observations make it possible to affirm that the change in temperature solely had no effect on oxidation of TN. Thereafter, two SBR devices were used for the denitrification process: one containing HTS wastewater, activated sludge and glucose as carbon source, and the other only HTS wastewater and activated sludge. In both cases, the elimination of TN still low even with an increase in the amount of glucose. These situations show that the TN removal was not only depended on type of carbon source. Based on the results of nitrification and denitrification tests, it may turn out that the activated sludge microorganisms’ activities were affected by the HTS molecular sieves wastewater high concentration as well as the salinity (about 3%) of this kind of wastewater.展开更多
文摘Fluid catalytic cracking (FCC) salty wastewaters, containing quaternary ammonium compounds (QACs), are very difficult to treat by biochemical process. Anoxic/oxic (A/O) biochemical system, based on nitrification and denitrification reactions, was used to assess their possible biodegradation. Because of the negative effects of high salt concentration (3%), heavy metals and toxic organic matter on microorganisms’ activities, some techniques consisting of dilution, coagulation and flocculation, and ozonation pretreatments, were gradually tested to evaluate chemical oxygen demand (COD), ammonia-nitrogen (ammonia-N) and total nitrogen (TN) removal rates. In this process of FCC wastewater, starting with university-domesticated sludge, the ammonia-N and TN removal rates were worst. However, when using domesticated SBR’s sludge and operating with five-fold daily diluted influent (thus reducing salt concentration), the ammonia-N removal reached about 57% while the TN removal rate was less than 37% meaning an amelioration of the nitrification process. However, by reducing the dilution factors, these results were inflected after some days of operation, with ammonia-N removal decreasing and TN barely removed meaning a poor nitrification. Even by reducing heavy metals concentration with coagulation/flocculation process, the results never changed. Thereafter, by using ozonation pre-treatment to degrade the detected organic matter of di-tert-butylphenol and certain isoparaffins, COD, ammonia-N and TN removal rates reached 92%, 62% and 61%, respectively. These results showed that the activities of the microorganisms were increased, thus indicating a net denitrification and nitrification reactions improvement.
文摘The wastewater from hollow titanium silicate (HTS) zeolite consists essentially of high concentrations of COD and salt, and low ammonia-nitrogen concentrations (or high, sometimes). These chemical pollutants are produced in very large quantities during oil refining and are very difficult to manage on site. In addition, they can be very harmful to the environment when released without any treatment. The aim of this study is to evaluate, on the one hand, the feasibility of removing the COD from HTS wastewater using a sequencing batch reactor (SBR) and, on the other hand, to test the combined effect of nitrification and denitrification under different conditions of treatment on the elimination of Total Nitrogen (TN) from HTS wastewater containing a high concentration of ammonia-nitrogen. SBR intermittent domestication tests of sludge have been successfully carried out with wastewater from a municipal treatment plant with a COD removal rate of 87%. Subsequently, HTS wastewater containing high concentrations of COD was treated by this SBR system. After three months of operation, the efficiency of COD elimination fluctuated between 47% and 67%. Therefore this result could serve as a precursor to a possible second COD bioprocessing. The results obtained during nitrification of the same HTS molecular sieves wastewater with low C/N ratio gave, under an operating temperature below 10°C (winter conditions), less than 16% of total nitrogen (TN) removal. When the temperature was increased to 40°C, the TN removal efficiency remained worse. These observations make it possible to affirm that the change in temperature solely had no effect on oxidation of TN. Thereafter, two SBR devices were used for the denitrification process: one containing HTS wastewater, activated sludge and glucose as carbon source, and the other only HTS wastewater and activated sludge. In both cases, the elimination of TN still low even with an increase in the amount of glucose. These situations show that the TN removal was not only depended on type of carbon source. Based on the results of nitrification and denitrification tests, it may turn out that the activated sludge microorganisms’ activities were affected by the HTS molecular sieves wastewater high concentration as well as the salinity (about 3%) of this kind of wastewater.
