The structural evolution of tectonically deformed coals （TDC） with different deformational mechanisms and different deformational intensities are investigated in depth through X-ray diffraction （XRD） analysis on 3...The structural evolution of tectonically deformed coals （TDC） with different deformational mechanisms and different deformational intensities are investigated in depth through X-ray diffraction （XRD） analysis on 31 samples of different metamorphic grades （R ： 0.7%-3.1%） collected from the Huaibei coalfield. The results indicated that there are different evolution characteristics between the ductile and brittle deformational coals with increasing of metamorphism and deformation. On the one hand, with the increase of metamorphism, the atomic plane spacing （d002） is decreasing at step velocity, the stacking of the BSU layer （Lc） is increasing at first and then decreasing, but the extension of the BSU layer （La） and the ratio of La/Lc are decreasing initially and then increasing. On the other hand, for the brittle deformational coal, d002 is increasing initially and then decreasing, which causes an inversion of the variation of Lc and La under the lower-middle or higher-middle metamorphism grade when the deformational intensity was increasing. In contrast, in the ductile deformational coals, d002 decreased initially and then increased, and the value of L~ decreased with the increase of deformational intensity. But the value of La increased under the lower-middle metamorphism grade and increased at first and then decreased under the higher-middle metamorphism grade. We conclude that the degradation and polycondensation of TDC macromolecular structure can be obviously impacted during the ductile deformational process, because the increase and accumulation of unit dislocation perhaps transforms the stress into strain energy. Meanwhile, the brittle deformation can transform the stress into frictional heat energy, and promote the metamorphism and degradation as well. It can be concluded that deformation is more important than metamorphism to the differential evolution of the ductile and brittle deformational coals.展开更多
To reveal the geochemical characters of water coproduced with coalbed gas and shallow groundwater,water samples were collected from 12 wells of coalbed methane and 7 wells of shallow groundwater.The pH,CODMn,fCO2,tota...To reveal the geochemical characters of water coproduced with coalbed gas and shallow groundwater,water samples were collected from 12 wells of coalbed methane and 7 wells of shallow groundwater.The pH,CODMn,fCO2,total dissolved solids （TDS）,total hardness,and concentrations of metasilicic acid,sodium and kalium,calcium ion,magnesium ion,ammonium iron,bicarbonate ion,carbonate,chloride,sulfate ion,nitrate ion,fluoride,lithium,zinc,nickel,manganese,iron,boron,barium,etc.of the samples were measured.Research results showed the following：（1） Concentrations of TDS,chloride,fluoride,sodium and kalium,ammonium,iron,and barium in the water coproduced with coalbed gas exceeded the national standards of China; however,physical,chemical,and biological properties of shallow groundwater could meet the national standard.（2） The water produced from coalbed contained mainly Na-Cl·HCO3,with average TDS of 4588.5 ppm,whereas shallow groundwater contained a mixture of chemicals including Na.Mg.Ca-HCO3·SO4 and Na.Mg-HCO3·SO4,with average TDS of 663.8 ppm.（3） In general,it was observed that bicarbonate and sodium accumulated in a reducing environment and deeper system,while depletion of hydrogen ions and dissolution of sulfate,calcium,and magnesium occurred in a redox environment and shallow system.（4） Sodium and kalium,ammonium,chloride,and bicarbonate ions were the main ions found in the study area.展开更多
In this study, a risk-based management model is developed and applied to an industrial zone. The models proposed by the United States Environmental Protection Agency and Han Bing have been improved by adding a residua...In this study, a risk-based management model is developed and applied to an industrial zone. The models proposed by the United States Environmental Protection Agency and Han Bing have been improved by adding a residual ratio of volatile organic compounds （VOC） after boiling and deleting the related parameters in half-life. Using this improved model, an integrated process was used to assess human health risk level in the study area. Compared with water quality analysis, the results highlight the importance of applying an integrated approach for decision making on risk levels and water protection. The results of this study demonstrated that： （1） Compared with these permissible level standards in China （GB 3838-2002） and National Primary Drinking Water Regulations of the United States, the residents＇ daily life had not been affected by the groundwater in this area （except for relative bad water quality of HB3-4 and HB3-6）; （2） The typical detected organic contaminants of all groundwater samples were chloroform, carbon tetrachloride, trichloroethylene and tetrachloroethene, and the pollution sources were mainly industrial sources by preliminary investigations; （3） As for groundwater, the non-carcinogenic risk values of all samples do not exceed the permissible level of 1.0 and the carcinogenic risk values are relatively lower than the permissible level of 1.00E-06 to 1.00E-04; （4） Drinking water pathway of trichloroethylene and tetrachloroethylene mainly contribute to increasing the health risk of residents＇ in study areas; （5） In terms of non-carcinogenic risk and carcinogenic risk, the health risk order for drinking water pathway and dermal contact pathway was： drinking water pathway 〉 dermal contact pathway.展开更多
The fracturing technology for shale gas reservoir is the key to the development of shale gas industrialization.It makes much sense to study the mechanical properties and deformation characteristics of shale,due to its...The fracturing technology for shale gas reservoir is the key to the development of shale gas industrialization.It makes much sense to study the mechanical properties and deformation characteristics of shale,due to its close relationship with the fracability of shale gas reservoir.This paper took marine shale in the Changning area,southern Sichuan Basin of China as the research object.Based on field profile and hand specimen observation,we analyzed the development of natural fractures and collected samples from Wufeng Formation and Longmaxi Formation.Combining with the indoor experiment,we investigated the macroscopic and microscopic structural features and the remarkable heterogeneity of shale samples.Then we illustrated the mechanics and deformation characteristics of shale,through uniaxial compression test and direct shear test.The shale has two types of fracture modes,which depend on the angular relation between loading direction and the bedding plane.Besides,the Wufeng shale has a higher value of brittleness index than the Longmaxi shale,which was calculated using two methods,mechanical parameters and mineral composition.Given the above results,we proposed a fracability evaluation model for shale gas reservoir using the analytic hierarchy process.Four influence factors,brittleness index,fracture toughness,natural fractures and cohesive force,are considered.Finally,under the control of normalized value and weight coefficient of each influence factor,the calculations results indicate that the fracability index of the Wufeng Formation is higher than that of the Longmaxi Formation in Changning area,southern Sichuan Basin.展开更多
煤层气按照其生成演化阶段和气体成因类型可将煤层气分为原生生物成因气、热成因气和次生生物成因气,微生物降解煤岩生成的气体(主要成分为甲烷)则为次生生物成因气(Bao et al.,2015;2016)。微生物促进煤层甲烷生成技术(英文简称MECBM)...煤层气按照其生成演化阶段和气体成因类型可将煤层气分为原生生物成因气、热成因气和次生生物成因气,微生物降解煤岩生成的气体(主要成分为甲烷)则为次生生物成因气(Bao et al.,2015;2016)。微生物促进煤层甲烷生成技术(英文简称MECBM)是指通过向地下煤层注入外来微生物种群来降解煤层有机质生成甲烷或者是通过注入养分刺激原位煤层发生生物气化生成甲烷的技术(Park and Liang,2016),这属于地质学、微生物学和纳米地球科学等多学科交叉研究的范畴。展开更多
Geologic surface approximation is profoundly affected by the presence, density and location of scattered geologic input data. Many studies have recognized the importance of utilizing varied sources of information when...Geologic surface approximation is profoundly affected by the presence, density and location of scattered geologic input data. Many studies have recognized the importance of utilizing varied sources of information when reconstructing a surface. This paper presents an improved geologic surface approximation method using a multiquadric function and borehole data. Additional information, i.e., inequality elevation and dip-strikes data extracted from outcrops or mining faces, is introduced in the form of physical constraints that control local changes in the estimated surface. Commonly accepted hypothesis states that geologic surfaces can be approximated to any desired degree of exactness by the summation of regular, mathematically defined, surfaces: in particular displaced quadric forms. The coefficients of the multiquadric functions are traditionally found by a least squares method. The addition of physical constraints in this work makes such an approach into a non-deterministic polynomial time problem. Hence we propose an objective function that represents the quality of the estimated surface and that includes the additional constraints by incorporation of a penalty function. Maximizing the smoothness of the estimated surface and its fitness to the additional constraints then allows the coefficients of the multiquadric function to be obtained by iterative methods. This method was implemented and demonstrated using data collected from the 81'st coal mining area of the Huaibei Coal Group.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.41030422, 40972131,40772135 and 41202120)the National Basic Research Program of China(Grant Nos.2009CB219601 and 2006CB202201)the China Postdoctoral Science Foundation Funded Project(2012M510590)
文摘The structural evolution of tectonically deformed coals （TDC） with different deformational mechanisms and different deformational intensities are investigated in depth through X-ray diffraction （XRD） analysis on 31 samples of different metamorphic grades （R ： 0.7%-3.1%） collected from the Huaibei coalfield. The results indicated that there are different evolution characteristics between the ductile and brittle deformational coals with increasing of metamorphism and deformation. On the one hand, with the increase of metamorphism, the atomic plane spacing （d002） is decreasing at step velocity, the stacking of the BSU layer （Lc） is increasing at first and then decreasing, but the extension of the BSU layer （La） and the ratio of La/Lc are decreasing initially and then increasing. On the other hand, for the brittle deformational coal, d002 is increasing initially and then decreasing, which causes an inversion of the variation of Lc and La under the lower-middle or higher-middle metamorphism grade when the deformational intensity was increasing. In contrast, in the ductile deformational coals, d002 decreased initially and then increased, and the value of L~ decreased with the increase of deformational intensity. But the value of La increased under the lower-middle metamorphism grade and increased at first and then decreased under the higher-middle metamorphism grade. We conclude that the degradation and polycondensation of TDC macromolecular structure can be obviously impacted during the ductile deformational process, because the increase and accumulation of unit dislocation perhaps transforms the stress into strain energy. Meanwhile, the brittle deformation can transform the stress into frictional heat energy, and promote the metamorphism and degradation as well. It can be concluded that deformation is more important than metamorphism to the differential evolution of the ductile and brittle deformational coals.
基金funded by the National Science and Technology Major Project (2011ZX05060-005 2009ZX05039-003)
文摘To reveal the geochemical characters of water coproduced with coalbed gas and shallow groundwater,water samples were collected from 12 wells of coalbed methane and 7 wells of shallow groundwater.The pH,CODMn,fCO2,total dissolved solids （TDS）,total hardness,and concentrations of metasilicic acid,sodium and kalium,calcium ion,magnesium ion,ammonium iron,bicarbonate ion,carbonate,chloride,sulfate ion,nitrate ion,fluoride,lithium,zinc,nickel,manganese,iron,boron,barium,etc.of the samples were measured.Research results showed the following：（1） Concentrations of TDS,chloride,fluoride,sodium and kalium,ammonium,iron,and barium in the water coproduced with coalbed gas exceeded the national standards of China; however,physical,chemical,and biological properties of shallow groundwater could meet the national standard.（2） The water produced from coalbed contained mainly Na-Cl·HCO3,with average TDS of 4588.5 ppm,whereas shallow groundwater contained a mixture of chemicals including Na.Mg.Ca-HCO3·SO4 and Na.Mg-HCO3·SO4,with average TDS of 663.8 ppm.（3） In general,it was observed that bicarbonate and sodium accumulated in a reducing environment and deeper system,while depletion of hydrogen ions and dissolution of sulfate,calcium,and magnesium occurred in a redox environment and shallow system.（4） Sodium and kalium,ammonium,chloride,and bicarbonate ions were the main ions found in the study area.
基金supported by National Science and Technology Major Project(No2009 ZX 05039-003,2009 ZX 05039-004,2011ZX05060-005)the National Natural Science Foundation of China(No 2010CB428801-1)state-owned land resources investigation(1212010430351)
文摘In this study, a risk-based management model is developed and applied to an industrial zone. The models proposed by the United States Environmental Protection Agency and Han Bing have been improved by adding a residual ratio of volatile organic compounds （VOC） after boiling and deleting the related parameters in half-life. Using this improved model, an integrated process was used to assess human health risk level in the study area. Compared with water quality analysis, the results highlight the importance of applying an integrated approach for decision making on risk levels and water protection. The results of this study demonstrated that： （1） Compared with these permissible level standards in China （GB 3838-2002） and National Primary Drinking Water Regulations of the United States, the residents＇ daily life had not been affected by the groundwater in this area （except for relative bad water quality of HB3-4 and HB3-6）; （2） The typical detected organic contaminants of all groundwater samples were chloroform, carbon tetrachloride, trichloroethylene and tetrachloroethene, and the pollution sources were mainly industrial sources by preliminary investigations; （3） As for groundwater, the non-carcinogenic risk values of all samples do not exceed the permissible level of 1.0 and the carcinogenic risk values are relatively lower than the permissible level of 1.00E-06 to 1.00E-04; （4） Drinking water pathway of trichloroethylene and tetrachloroethylene mainly contribute to increasing the health risk of residents＇ in study areas; （5） In terms of non-carcinogenic risk and carcinogenic risk, the health risk order for drinking water pathway and dermal contact pathway was： drinking water pathway 〉 dermal contact pathway.
基金financially supported by the National Natural Science Foundation of China(Grant No.41530315,41372213)the National Science and Technology Major Project of China(Grant No.2016ZX05066003,2016ZX05066006)the“Climate Change:Carbon Budget and Related Issues”Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA05030100)
文摘The fracturing technology for shale gas reservoir is the key to the development of shale gas industrialization.It makes much sense to study the mechanical properties and deformation characteristics of shale,due to its close relationship with the fracability of shale gas reservoir.This paper took marine shale in the Changning area,southern Sichuan Basin of China as the research object.Based on field profile and hand specimen observation,we analyzed the development of natural fractures and collected samples from Wufeng Formation and Longmaxi Formation.Combining with the indoor experiment,we investigated the macroscopic and microscopic structural features and the remarkable heterogeneity of shale samples.Then we illustrated the mechanics and deformation characteristics of shale,through uniaxial compression test and direct shear test.The shale has two types of fracture modes,which depend on the angular relation between loading direction and the bedding plane.Besides,the Wufeng shale has a higher value of brittleness index than the Longmaxi shale,which was calculated using two methods,mechanical parameters and mineral composition.Given the above results,we proposed a fracability evaluation model for shale gas reservoir using the analytic hierarchy process.Four influence factors,brittleness index,fracture toughness,natural fractures and cohesive force,are considered.Finally,under the control of normalized value and weight coefficient of each influence factor,the calculations results indicate that the fracability index of the Wufeng Formation is higher than that of the Longmaxi Formation in Changning area,southern Sichuan Basin.
文摘煤层气按照其生成演化阶段和气体成因类型可将煤层气分为原生生物成因气、热成因气和次生生物成因气,微生物降解煤岩生成的气体(主要成分为甲烷)则为次生生物成因气(Bao et al.,2015;2016)。微生物促进煤层甲烷生成技术(英文简称MECBM)是指通过向地下煤层注入外来微生物种群来降解煤层有机质生成甲烷或者是通过注入养分刺激原位煤层发生生物气化生成甲烷的技术(Park and Liang,2016),这属于地质学、微生物学和纳米地球科学等多学科交叉研究的范畴。
基金provided by the National Science and Technology Major Project of China (Nos.2009ZX05039-004 and 2009ZX 05039-002)the National Natural Science Foundation of China (Nos.40771167 and 70621001)
文摘Geologic surface approximation is profoundly affected by the presence, density and location of scattered geologic input data. Many studies have recognized the importance of utilizing varied sources of information when reconstructing a surface. This paper presents an improved geologic surface approximation method using a multiquadric function and borehole data. Additional information, i.e., inequality elevation and dip-strikes data extracted from outcrops or mining faces, is introduced in the form of physical constraints that control local changes in the estimated surface. Commonly accepted hypothesis states that geologic surfaces can be approximated to any desired degree of exactness by the summation of regular, mathematically defined, surfaces: in particular displaced quadric forms. The coefficients of the multiquadric functions are traditionally found by a least squares method. The addition of physical constraints in this work makes such an approach into a non-deterministic polynomial time problem. Hence we propose an objective function that represents the quality of the estimated surface and that includes the additional constraints by incorporation of a penalty function. Maximizing the smoothness of the estimated surface and its fitness to the additional constraints then allows the coefficients of the multiquadric function to be obtained by iterative methods. This method was implemented and demonstrated using data collected from the 81'st coal mining area of the Huaibei Coal Group.
