Although Platycodon grandiflorum(Jacq.)A.DC.is a renowned medicine food homology plant,reports of excessive cadmium(Cd)levels are common,which affects its safety for clinical use and food consumption.To enable its Cd ...Although Platycodon grandiflorum(Jacq.)A.DC.is a renowned medicine food homology plant,reports of excessive cadmium(Cd)levels are common,which affects its safety for clinical use and food consumption.To enable its Cd levels to be regulated or reduced,it is necessary to first elucidate the mechanism of Cd uptake and accumulation in the plant,in addition to its detoxification mechanisms.This present study used inductively couple plasma-mass-spectrometry to analyze the subcellular distribution and chemical forms of Cd in different tissues of P.grandiflorum.The experimental results showed that Cd was mainly accumulated in the roots[predominantly in the cell wall(50.96%-61.42%)],and it was found primarily in hypomobile and hypotoxic forms.The proportion of Cd in the soluble fraction increased after Cd exposure,and the proportion of insoluble phosphate Cd and oxalate Cd increased in roots and leaves,with a higher increase in oxalate Cd.Therefore,it is likely that root retention mechanisms,cell wall deposition,vacuole sequestration,and the formation of low mobility and low toxicity forms are tolerance strategies for Cd detoxification used by P.grandiflorum.The results of this study provide a theoretical grounding for the study of Cd accumulation and detoxification mechanisms in P.grandiflorum,and they can be used as a reference for developing Cd limits and standards for other medicine food homology plants.展开更多
A growing number of three-dimensional(3D)-print- ing processes have been applied to tissue engineering. This paper presents a state-of-the-art study of 3D-printing technologies for tissue-engineering applications, wit...A growing number of three-dimensional(3D)-print- ing processes have been applied to tissue engineering. This paper presents a state-of-the-art study of 3D-printing technologies for tissue-engineering applications, with particular focus on the development of a computer-aided scaffold design system; the direct 3D printing of functionally graded scaffolds; the modeling of selective laser sintering(SLS) and fused deposition modeling(FDM) processes; the indirect additive manufacturing of scaffolds, with both micro and macro features; the development of a bioreactor; and 3D/4D bioprinting. Technological limitations will be discussed so as to highlight the possibility of future improvements for new 3D-printing methodologies for tissue engineering.展开更多
The rapid development of additive manufacturing and advances in shape memory materials have fueled the progress of four-dimensional (4D) printing. With increasing improvements in design, reversible 4D printing or two-...The rapid development of additive manufacturing and advances in shape memory materials have fueled the progress of four-dimensional (4D) printing. With increasing improvements in design, reversible 4D printing or two-way 4D printing has been proven to be feasible. This technology will fully eliminate the need for human interference, as the programming is completely driven by external stimuli, which allows 4D-printed parts to be actuated in multiple cycles. This study proposes a new reversible 4D print- ing actuation method. The swelling of an elastomer and heat are used in the programming stage, and heat is used in the recovery stage. The main focus of this study is on the self-actuated programming step. To attain control over the bending, a simple predictive model has been developed to study the degree of cur- vature. The parameters, temperature, and elastomer thickness have also been studied in order to gain a better understanding of how well the model predicts the curvature. This understanding of the curvature will provide a great degree of control over the reversible 4D-printed structure.展开更多
基金This work was supported by the Major Science and Technology Projects in Inner Mongolia Autonomous Region(No.2019ZD005)the National Natural Science Foundation of China(No.81903751)+1 种基金by the Natural Science Basic Research Project of Shaanxi Science and Technology Department(No.2019JQ-877)by the Scientific Research Project of Shaanxi Administration of Traditional Chinese Medicine(No.2019-ZZ-ZY018).
文摘Although Platycodon grandiflorum(Jacq.)A.DC.is a renowned medicine food homology plant,reports of excessive cadmium(Cd)levels are common,which affects its safety for clinical use and food consumption.To enable its Cd levels to be regulated or reduced,it is necessary to first elucidate the mechanism of Cd uptake and accumulation in the plant,in addition to its detoxification mechanisms.This present study used inductively couple plasma-mass-spectrometry to analyze the subcellular distribution and chemical forms of Cd in different tissues of P.grandiflorum.The experimental results showed that Cd was mainly accumulated in the roots[predominantly in the cell wall(50.96%-61.42%)],and it was found primarily in hypomobile and hypotoxic forms.The proportion of Cd in the soluble fraction increased after Cd exposure,and the proportion of insoluble phosphate Cd and oxalate Cd increased in roots and leaves,with a higher increase in oxalate Cd.Therefore,it is likely that root retention mechanisms,cell wall deposition,vacuole sequestration,and the formation of low mobility and low toxicity forms are tolerance strategies for Cd detoxification used by P.grandiflorum.The results of this study provide a theoretical grounding for the study of Cd accumulation and detoxification mechanisms in P.grandiflorum,and they can be used as a reference for developing Cd limits and standards for other medicine food homology plants.
基金Singapore National Research Foundation (NRF) for funding the Singapore Centre for 3D Printing (SC3DP)
文摘A growing number of three-dimensional(3D)-print- ing processes have been applied to tissue engineering. This paper presents a state-of-the-art study of 3D-printing technologies for tissue-engineering applications, with particular focus on the development of a computer-aided scaffold design system; the direct 3D printing of functionally graded scaffolds; the modeling of selective laser sintering(SLS) and fused deposition modeling(FDM) processes; the indirect additive manufacturing of scaffolds, with both micro and macro features; the development of a bioreactor; and 3D/4D bioprinting. Technological limitations will be discussed so as to highlight the possibility of future improvements for new 3D-printing methodologies for tissue engineering.
文摘The rapid development of additive manufacturing and advances in shape memory materials have fueled the progress of four-dimensional (4D) printing. With increasing improvements in design, reversible 4D printing or two-way 4D printing has been proven to be feasible. This technology will fully eliminate the need for human interference, as the programming is completely driven by external stimuli, which allows 4D-printed parts to be actuated in multiple cycles. This study proposes a new reversible 4D print- ing actuation method. The swelling of an elastomer and heat are used in the programming stage, and heat is used in the recovery stage. The main focus of this study is on the self-actuated programming step. To attain control over the bending, a simple predictive model has been developed to study the degree of cur- vature. The parameters, temperature, and elastomer thickness have also been studied in order to gain a better understanding of how well the model predicts the curvature. This understanding of the curvature will provide a great degree of control over the reversible 4D-printed structure.
