期刊文献+
共找到9篇文章
< 1 >
每页显示 20 50 100
Allopolyploid origin and niche expansion of Rhodiola integrifolia(Crassulaceae)
1
作者 Da-Lv Zhong Yuan-Cong Li jian-qiang zhang 《Plant Diversity》 SCIE CAS CSCD 2023年第1期36-44,共9页
Polyploidy after hybridization between species can lead to immediate post-zygotic isolation,causing saltatory origin of new species.Although the incidence of polyploidization in plants is high,it is thought that a new... Polyploidy after hybridization between species can lead to immediate post-zygotic isolation,causing saltatory origin of new species.Although the incidence of polyploidization in plants is high,it is thought that a new polyploid lineage can succeed only if it establishes a new ecological niche divergent from its progenitor lineages.We tested the hypothesis that Rhodiola integrifolia from North America is an allopolyploid produced by R. rhodantha and R.rosea and determined whether its survival can be explained by the niche divergence hypothesis.To this end,we sequenced two low-copy nuclear genes(ncpGS and rpb2) in a phylogenetic analysis of 42 Rhodiola species and tested for niche equivalency and similarity using Schoener’s D as the index of niche overlap.Our phylogeny-based approach showed that R integrifolia possesses alleles from both R. rhodantha and rosea Dating analysis showed that the hybridization event that led to R.integrifolia occurred ca.1.67 Mya and niche modeling analysis showed that at this time,both R.rosea and R.rhodantha may have been present in Beringia,providing the opportunity for the hybridization event.We also found that the niche of R.integrifolia differs from that of its progenitors in both niche breadth and optimum.Taken together,these results confirm the hybrid origin of R.integrifolia and support the niche divergence hypothesis for this tetraploid species.Our results underscore the fact that lineages with no current overlapping distribution could produce hybrid descendants in the past,when climate oscillations made their distributions overlap. 展开更多
关键词 ALLOPOLYPLOID HYBRIDIZATION ncpGS Niche shift rpb2 Schoener’s D
下载PDF
Subconjunctival conbercept for the treatment of corneal neovascularization
2
作者 Cun Sun Fang Ruan +2 位作者 Shang Li jian-qiang zhang Ying Jie 《International Journal of Ophthalmology(English edition)》 SCIE CAS 2023年第6期871-875,共5页
·AIM:To investigate the effectiveness and safety of subconjunctival injection of conbercept in the treatment of corneal neovascularization(CNV).·METHODS:The data on 10 consecutively recruited patients with C... ·AIM:To investigate the effectiveness and safety of subconjunctival injection of conbercept in the treatment of corneal neovascularization(CNV).·METHODS:The data on 10 consecutively recruited patients with CNV who received a subconjunctival conbercept(1 mg)once,and measured the area,length,and diameter of neovascularization before and after(1d,1,2wk,and 1mo)treatment as well as the occurrence of systemic and ocular complications after treatment were analyzed.·RESULTS:There was a statistically significant reduction in the area of CNV one day after treatment(mean±SD:38.46±11.36 mm^(2)),compared with before treatment(42.46±12.80 mm^(2),P<0.01).There was also a statistically significant reduction in the length(3.86±1.80 mm vs 4.64±1.77 mm,P<0.01)and diameter(0.044±0.022 vs 0.060±0.026,P<0.05)of CNV,one week after treatment comparing to before treatment.The reduction in all three parameters was maximized at two weeks after treatment(area:29.49±8.83 mm^(2),P<0.001;length:3.50±1.88 mm,P<0.001;and diameter:0.038±0.017 mm,P<0.01).No severe systemic or ocular complication was observed during the study.·CONCLUSION:During the observation period of onemonth,subconjunctival injection of conbercept is an effective and safe method for the reduction of CNV.It may be effective as a preoperative drug for neovascular corneal transplantation. 展开更多
关键词 KEYWORDS:corneal neovascularization conbercept anti-vascular endothelial growth factor subconjunctival injection
原文传递
REE characteristics of the coal in the Erlian Basin, Inner Mongolia, China, and its economic value 被引量:7
3
作者 Shao-qing Huang Shu-zheng Ning +2 位作者 jian-qiang zhang Li zhang Kang Liu 《China Geology》 2021年第2期256-265,共10页
The rare earth elements(REE)content of the coal in the Erlian Basin was determined by inductively coupled plasma mass spectrometry(ICP-MS),and it turns out that the REE content from different geological age shows a si... The rare earth elements(REE)content of the coal in the Erlian Basin was determined by inductively coupled plasma mass spectrometry(ICP-MS),and it turns out that the REE content from different geological age shows a significant difference:The REE content of the coal in the Jurassic Alatanheli Group is from 152.05×10^(−6) to 1416.21×10^(−6),with an average value of 397.31×10^(−6),and the relative concentration factor shows enriched;the REE content of the coal in Early Cretaceous Baiyanhua Group is from 20.65×10^(−6) to 102.53×10^(−6),the mean value is 49.06×10^(−6),and the relative concentration factor shows normally.The REE distribution patterns samples in Jurassic and Cretaceous shows the difference:The REE pattern in Jurassic coal mainly manifests as H-type distribution,with the Y,Lu positive anomaly,it is speculated that the fluid carried REE ions into the coal-bearing basin,and the heavy REE gather in the coal due to the different chemical properties of each REE.The REE occurrence mode is presumed to be mainly organic.Flat type is the REE main distribution pattern in Cretaceous coal.The REE patterns in clastic rocks of the roof,parting and floor of coal seam are similar to the REE patterns in the coal and the most possible reason is that the REE main source is from the clastic rock.It showed that the coal of the Early Jurassic,especially of Amugulen coalfield has resource value. 展开更多
关键词 Rare earth elements(REE) Distribution pattern type Concentration factor Alatanheli Group Baiyanhua Group Economic value Erlian Basin Inner Mongolia China
下载PDF
The only purple-flower species in Actaea L.is pollinated by a hornet
4
作者 Lin-Feng Qiu Jiu-Dong zhang +13 位作者 Ying Li Xiao-Ying Liu Dan-Qing zhang Long Huang Ya-Peng Yang Shi-Yu Wang Yue-Yi Li Zi-Wei Ma Jie Sui Lin Wang Xiao-Fen Che Xian-Hua Tian Yi Ren jian-qiang zhang 《Journal of Plant Ecology》 SCIE CSCD 2024年第4期181-196,共16页
Examining the pollination biology of plant species is not only crucial for enhancing our understanding of their reproductive biology,but also essential for elucidating their adaptation and evolutionary history.Here,we... Examining the pollination biology of plant species is not only crucial for enhancing our understanding of their reproductive biology,but also essential for elucidating their adaptation and evolutionary history.Here,we investigated the breeding system and pollination biology of two closely related species in Actaea.The flower of A.purpurea is unique in the genus with purple and chartaceous(paper-like)sepals,fewer stamens with yellow anthers and purple filaments.Through three seasons of field observation and exclusion experiments,we determined that A.purpurea was primarily pollinated by a hornet species,Vespa bicolor,which also served as the most efficient pollinator.In contrast,A.japonica was primarily pollinated by large flies.Actaea purpurea exhibited a significantly higher cumulative nectar volume than A.japonica,which could be a crucial factor in attracting V.bicolor.A control experiment further demonstrated that removing the nectar leaf(petal)significantly decreased the visiting frequency of V.bicolor.Breeding system studies revealed that both species were self-compatible,yet they primarily underwent outcrossing in natural habitats.Our study presents a compelling case of possible pollinator shift in A.purpurea accompanied by morphological divergence.A more in-depth investigation of this system would offer crucial insights into the extent to which pollinators are involved in the plant speciation process and whether they contribute to reproductive isolation between closely related species. 展开更多
关键词 Actaea purpurea Actaea japonica breeding system pollinator shift speciation Vespa bicolor
原文传递
Experimental investigation of nitrogen flow boiling heat transfer in a single mini-channel 被引量:3
5
作者 Bei-chen zhang Qing-lian LI +3 位作者 Yuan WANG jian-qiang zhang Jie SONG Feng-chen ZHUANG 《Journal of Zhejiang University-Science A(Applied Physics & Engineering)》 SCIE EI CAS CSCD 2020年第2期147-166,共20页
Flow boiling heat transfer of nitrogen at high subcritical pressure conditions in a single vertical mini-channel with the diameter of 2.0 mm was experimentally investigated.The tested mass flux varied from 530 to 830 ... Flow boiling heat transfer of nitrogen at high subcritical pressure conditions in a single vertical mini-channel with the diameter of 2.0 mm was experimentally investigated.The tested mass flux varied from 530 to 830 kg/(m^2·s),the inlet pressure ranged from 630 to 1080 kPa,and the heat flux ranged from 0 to 223.2 kW/m^2.Effects of the mass flux and the inlet pressure on the nitrogen boiling curve were examined.Results showed that within the limited test conditions,the merging of three boiling curves indicates the dominance of nucleate boiling and the inlet pressure has a positive enhancement on heat transfer performance.Three heat transfer trends were identified with increasing heat flux.At low heat fluxes,the heat transfer coefficient increases first and then decreases with vapour quality.At intermediate heat fluxes,the heat transfer coefficient versus the vapour quality presents an inverted"U"shape.At high heat fluxes,a double valley shape was observed and the partial dry-out in intermittent flow and annular flow helps to interpret the phenomenon.The increasing inlet pressure increases the heat transfer coefficient over a wide range of vapour quality until the partial dry-out inception.The lower surface tension and lower latent heat of evaporation enhance the nucleate boiling for higher inlet pressure.A modified experimental correlation(mean absolute error(MAE)=19.3%)was proposed on the basis of the Tran correlation considering both the nucleate boiling and the partial dry-out heat transfer mechanism. 展开更多
关键词 MINI-CHANNEL NITROGEN Flow boiling Heat transfer Regenerative cooling
原文传递
CRYSTALLIZATION BEHAVIOR, THERMAL AND MECHANICAL PROPERTIES OF PHBV/GRAPHENE NANOSHEET COMPOSITES 被引量:3
6
作者 Bing-jie Wang Yu-jie zhang +4 位作者 jian-qiang zhang Qu-ting Gou Zong-bao Wang Peng Chen 顾群 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2013年第4期670-678,共9页
Biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/graphene nanosheet (GNS) composites were prepared via a solution-casting method at low GNS loadings in this work. Transmission electron microscop... Biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/graphene nanosheet (GNS) composites were prepared via a solution-casting method at low GNS loadings in this work. Transmission electron microscopy revealed that a fine dispersion of GNSs was achieved in the PHBV matrix. The thermal properties of the nanocomposites were investigated by thermogravimetric analysis, and the results showed that the thermal stability of PHBV was significantly improved with a very low loading of GNSs. Nonisothermal melts crystallization behavior, spherulitic morphology and crystal structure of neat PHBV and the PHBV/GNSs nanocomposites were investigated, and the experimental results indicated that crystallization behavior of PHBV was enhanced by the presence of GNSs due to the heterogeneous nucleation effect; however, the two-dimensional (2D) GNSs might restrict the mobility of the PHBV chains in the process of crystal growing. Dynamic mechanical analysis studies showed that the storage modulus of the PHBV/GNSs nanocomposites was greatly improved. 展开更多
关键词 PHBV Graphene nanosheets NANOCOMPOSITES Solution-casting films.
原文传递
Effect of CaO/Al2O3 ratio on viscosity and structure of CaO-Al2O3-based fluoride-free mould fluxes 被引量:2
7
作者 Qi Wang Ji-an Yang +3 位作者 Chen zhang De-xiang Cai jian-qiang zhang Oleg Ostrovski 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2019年第4期374-384,共11页
The effects of CaO/Al2O3 ratio on viscosity and structure of the CaO-Al2O3-based fluoride-free mould fluxes were investigated with the CaO/Al2O3 ratio varied from 1 to 4 and the content of SiO2 fixed at 7 wt.%. The in... The effects of CaO/Al2O3 ratio on viscosity and structure of the CaO-Al2O3-based fluoride-free mould fluxes were investigated with the CaO/Al2O3 ratio varied from 1 to 4 and the content of SiO2 fixed at 7 wt.%. The increase in the CaO/Al2O3 ratio from 1 to 2 lowered the viscosity of the flux melts. The viscosity increased slightly with the CaO/Al2O3 ratio from 2 to 3, and this increase became significant with further increasing CaO/Al2O3 ratio to 4. Both break temperature and apparent activation energy were found to be increased with the increase in CaO/Al2O3 ratio from 2 to 4. There was no break temperature available in the flux with CaO/Al2O3 ratio of 1. Changing the CaO/Al2O3 ratio from 1 to 2 decreased the apparent activation energy. Equilibrium phases of the fluxes were calculated using FactSage 7.1 and the major phases were found to be varied with the CaO/Al2O3 ratio. Structures of tested mould fluxes were analysed using Fourier transform infrared spectroscopy. The results showed that the increase in the CaO/Al2O3 ratio from 1 to 2 decreased the complexity of the structure, leading to a reduced viscosity. With the increase in the CaO/Al2O3 ratio from 2 to 4, both solid phase precipitation and melt structure contributed to the variation of viscosity. 展开更多
关键词 CaO-Al2O3-based FLUX CaO/Al2O3 RATIO VISCOSITY FLUX STRUCTURE
原文传递
Characteristics of Welding Crack Defects and Failure Mode in Resistance Spot Welding of DP780 Steel 被引量:2
8
作者 Xiao-pei WANG Yong-qiang zhang +2 位作者 Jian-bin JU jian-qiang zhang Jian-wei YANG 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2016年第10期1104-1110,共7页
The mechanical properties of welded joints in resistance spot welding of DP780 steel were tested,and three different types of welding cracks in welded joints were investigated by optical microscopy,scanning electron m... The mechanical properties of welded joints in resistance spot welding of DP780 steel were tested,and three different types of welding cracks in welded joints were investigated by optical microscopy,scanning electron microscopy and electron back-scattered diffraction.Finally,the failure mode of the welded joints in shear tensile test was discussed.It is found the shear tensile strength of welded joints can be greatly improved by adding preheating current or tempering current.The surface crack in welded joint is intergranular fracture,while the inner crack in welded joint is transgranular fracture,and the surface crack on the edge of the electrode imprint can be improved by adding preheating current or tempering current.The traditional failure mode criterion advised by American Welding Society is no longer suitable for DP780 spot welds and the critical nugget size suggested by Pouranvari is overestimated. 展开更多
关键词 resistance spot welding mechanical property crack defect failure mode DP780 steel
原文传递
SOLUTION CRYSTALLIZATION BEHAVIOR OF LINEAR AND STAR-SHAPED POLY(ETHYLENE GLYCOL)-b-POLY(ε-CAPROLACTONE) BLOCK COPOLYMERS
9
作者 Ting Yu jian-qiang zhang +5 位作者 Ya Lia Su-dan Shen Wen-feng Wei Peng Chen 王宗宝 顾群 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2013年第12期1717-1724,共8页
Lamellar crystals of diblock, triblock and four-arm poly(ethylene glycol)-b-poly(ε-caprolactone) (PEG-b-PCL) crystalline-crystalline copolymers were successfully obtained from their solution. Morphology and str... Lamellar crystals of diblock, triblock and four-arm poly(ethylene glycol)-b-poly(ε-caprolactone) (PEG-b-PCL) crystalline-crystalline copolymers were successfully obtained from their solution. Morphology and structure of lamellar crystals of crystalline-crystalline copotymers were investigated using tapping-mode atomic force microscopy (AFM) and selected area electron diffraction (SAED). All of these samples showed the truncated-lozenge multilayer basal shapes with central screw dislocation or central stack, which were all obtained simultaneously from the oil bath. The diffraction pattern of PEG block lamellar crystal is attributed to the (120) diffracting planes and the pattern of PCL block lamellar crystal is attributed to the (1 I0) diffracting planes and (200) diffracting planes according to the SAED results. Four (110) crystal growth planes and two (200) crystal growth planes are discovered for the PCL blocks, but the (120) crystal growth planes of PEG blocks are hided in the figure of AFM. The crystalline structure of the four-arm copolymers (FA) is more disorder and confused than that of the diblock (DI) copolymer and the striated fold surface structures of lamellar crystals of four-arm copolymers (FA) are smoother than these of linear analogues, owing to the confused crystallization of blocks caused by the mutual restriction of blocks and the hindrance of the dendritic cores. In addition, the aspect ratio of FA is greater than that of the others. It is hypothesized that there are two reasons for the change of aspect ratios. First, the (200) diffracting planes of PCL crystals grew slowly compared to their (110) diffracting planes because of difference in the energy barrier. Secondly, edge dislocations on the (200) diffracting planes are also responsible for the variation of the aspect ratio. Consequently, the crystalline defects are augmented by the competing blocks crystallized simultaneously and the hindrance of the dendritic cores. 展开更多
关键词 Lamellar crystal Topological structure PEG-b-PCL Edge dislocation Aspect ratio.
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部