To tackle energy crisis and achieve sustainable development, aqueous rechargeable zinc ion batteries have gained widespread attention in large-scale energy storage for their low cost, high safety, high theoretical cap...To tackle energy crisis and achieve sustainable development, aqueous rechargeable zinc ion batteries have gained widespread attention in large-scale energy storage for their low cost, high safety, high theoretical capacity, and environmental compatibility in recent years. However, zinc anode in aqueous zinc ion batteries is still facing several challenges such as dendrite growth and side reactions(e.g., hydrogen evolution), which cause poor reversibility and the failure of batteries. To address these issues, interfacial modification of Zn anodes has received great attention by tuning the interaction between the anode and the electrolyte. Herein, we present recent advances in the interfacial modification of zinc anode in this review. Besides, the challenges of reported approaches of interfacial modification are also discussed.Finally, we provide an outlook for the exploration of novel zinc anode for aqueous zinc ion batteries.We hope that this review will be helpful in designing and fabricating dendrite-free and hydrogenevolution-free Zn anodes and promoting the practical application of aqueous rechargeable zinc ion batteries.展开更多
Single-crystal Ni-rich cathode material LiNi0.88Co0.09Al0.03O2(SC) was synthesized by a high-temperature solid-state calcination method. Physicochemical properties of primary and delithiated SC samples were investigat...Single-crystal Ni-rich cathode material LiNi0.88Co0.09Al0.03O2(SC) was synthesized by a high-temperature solid-state calcination method. Physicochemical properties of primary and delithiated SC samples were investigated by X-ray diffractometry, X-ray photoelectron spectroscopy, and transmission electron microscopy. Electrochemical performance was characterized by long-term cycling, cyclic voltammetry, and in-situ impedance spectroscopy. The results indicated that high temperature rendered layered oxides to lose lithium/oxygen in the interior and exterior, and induced cationic disordering. Besides, the solid-phase synthesis process promoted phase transformation for electrode materials, causing the coexisting multi-phase in a single particle. High temperature can foster the growth of single particles, but it caused unstable structure of layered phase.展开更多
Ni-rich cathodes exhibit appealing properties,such as high capacity density,low cost,and prominent energy density.However,the inferior ionic conductivity and bulk structural degradation become bottlenecks for Ni-rich ...Ni-rich cathodes exhibit appealing properties,such as high capacity density,low cost,and prominent energy density.However,the inferior ionic conductivity and bulk structural degradation become bottlenecks for Ni-rich cathodes and severely limit their commercial utilization.Traditional coating and doping methods suffer fatal drawbacks in functioning as a unit and cannot radically promote material performance to meet the needs of Li-ion batteries(LIBs).Herein,we successfully devised an ingenious and facile synthetic method to establish Ni-rich oxides with a La_(2)Zr_(2)O_(7) coating and Zr doping.The coating layer improves the ion diffusion kinetics and enhances Li-ion transportation while Zr doping effectively suppresses the phase transition of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cathode.Owing to the synergetic effect of Zr doping and La_(2)Zr_(2)O_(7) coating,the modified material shows prominent initial discharge capacity of 184.7 m Ah g^(-1) at 5℃ and maintains 177.5 m Ah g^(-1) after 100 cycles at 1℃.Overall,the proposed feasible electrode design method can have a far-reaching impact on further fabrication of advanced cathodes for high-performance LIBs.展开更多
High-nickel single-crystal layered oxide material has become the most promising cathode material for electric vehicle power battery due to its high energy density.However,this material still suffers from structural de...High-nickel single-crystal layered oxide material has become the most promising cathode material for electric vehicle power battery due to its high energy density.However,this material still suffers from structural degradation during cycling and especially the severe interfacial reactions at elevated temperatures that exacerbate irreversible capacity loss.Here,a simple strategy was used to construct a dualfunction Li_(1.5)Al_(0.5)Ge_(1.5)P_(3)O_(12)(LAGP)protective layer on the surface of the high-nickel single-crystal(SC)cathode material,leading to SC@LAGP material.The strong Al-O bonding effectively inhibits the release of lattice oxygen(O)at elevated temperatures,which is supported by the positive formation energy of O vacancy from first-principal calculations.Besides,theoretical calculations demonstrate that the appropriate amount of Al doping accelerates the electron and Li^(+)transport,and thus reduces the kinetic barriers.In addition,the LAGP protective layer alleviates the stress accumulation during cycling and effectively reduces the erosion of materials from the electrolyte decomposition at elevated temperatures.The obtained SC@LAGP cathode material demonstrates much enhanced cycling stability even at high voltage(4.6 V)and elevated temperature(55℃),with a high capacity retention of 91.3%after 100 cycles.This work reports a simple dual-function coating strategy that simultaneously stabilizes the structure and interface of the single-crystal cathode material,which can be applied to design other cathode materials.展开更多
Zinc metal anodes face several challenges,including the uncontrolled formation of dendrites,hydrogen evolution,and corrosion,which seriously hinder their application in practice.To address the above problems such as d...Zinc metal anodes face several challenges,including the uncontrolled formation of dendrites,hydrogen evolution,and corrosion,which seriously hinder their application in practice.To address the above problems such as dendrite formation and corrosion,we present a simple and applicable immersion method that enables in situ formation of a zinc phytate(PAZ)coating on the surface of commercial Zn flakes via a substitution reaction.This protective coating mitigates corrosion of zinc flakes by the electrolyte,reduces the interfacial impedance,and accelerates the migration kinetics of zinc ions.Besides,this method can preferentially expose the(002)crystal plane with strong atomic bonding,which not only improves the corrosion resistance of the zinc flake,but can also guide the parallel deposition of zinc ions along the(002)crystal plane and reduce the formation of dendrites.Benefiting from the above advantages,the PAZ@Zn‖Cu half-cell has shown over 900 cycles with average coulombic efficiency(CE)of99.81%at 4 mA cm^(-2).Besides,the PAZ@Zn‖PAZ@Zn symmetric cell operate stably for>1000 h at5 mA cm^(-2)and>340 h at 10 mA cm^(-2).Furthermore,we demonstrated that this in situ chemical treatment enables the formation of a robust,well-bound protective coating.This method provides insights for advancing the commercialization of zinc anodes and other metal anodes.展开更多
Ion exchange is a promising synthetic method for alleviating severe cation mixing in traditional layered oxide materials for lithium-ion batteries,leading to enhanced structural stability.However,the underlying mechan...Ion exchange is a promising synthetic method for alleviating severe cation mixing in traditional layered oxide materials for lithium-ion batteries,leading to enhanced structural stability.However,the underlying mechanisms of ion exchange are still not fully understood.Such a fundamental study of the ion-exchange mechanism is needed for achieving the controllable synthesis of layered oxides with a stable structure.Herein,we thoroughly unearth the underlying mechanism that triggers the ion exchange of Ni-rich materials in aqueous solutions by examining time-resolved structural evolution combined with theoretical calculations.Our results reveal that the reaction pathway of ion exchange can be divided into two steps:protonation and lithiation.The proton is the key to achieving charge balance in the ion exchange process,as revealed by X-ray adsorption spectroscopy and inductive coupled plasma analysis.In addition,the intermediate product shows high lattice distortion during ion exchange,but it ends up with a most stable product with high lattice energy.Such apparent discrepancies in lattice energy between materials before and after ion exchange emphasize the importance of synthetic design in structural stability.This work provides new insights into the ion-exchange synthesis of Ni-rich oxide materials,which advances the development of cathode materials for high-performance lithium-ion batteries.展开更多
Lithium-ion batteries(LIBs)represent the most promising choice for meeting the ever-growing demand of society for various electric applications,such as electric transportation,portable electronics,and grid storage.Nic...Lithium-ion batteries(LIBs)represent the most promising choice for meeting the ever-growing demand of society for various electric applications,such as electric transportation,portable electronics,and grid storage.Nickel-rich layered oxides have largely replaced LiCoO_(2)in commercial batteries because of their low cost,high energy density,and good reliability.Traditional nickel-based oxide particles,usually called polycrystal materials,are composed of microsized primary particles.However,polycrystal particles tend to suffer from pulverization and severe side reactions along grain boundaries during cycling.These phenomena accelerate cell degradation.Single-crystal materials,which exhibit robust mechanical strength and a high surface area,have great potential to address the challenges that hinder their polycrystal counterparts.A comprehensive understanding of the growing body of research related to single-crystal materials is imperative to improve the performance of cathodes in LIBs.This review highlights origins,recent developments,challenges,and opportunities for single-crystal layered oxide cathodes.The synthesis science behind single-crystal materials and comparative studies between single-crystal and polycrystal materials are discussed in detail.Industrial techniques and facilities are also reviewed in combination with our group’s experiences in single-crystal research.Future development should focus on facile production with strong control of the particle size and distribution,structural defects,and impurities to fully reap the benefits of single-crystal materials.展开更多
基金financial support from the National Natural Science Foundation of China (52272261 and 52104300)。
文摘To tackle energy crisis and achieve sustainable development, aqueous rechargeable zinc ion batteries have gained widespread attention in large-scale energy storage for their low cost, high safety, high theoretical capacity, and environmental compatibility in recent years. However, zinc anode in aqueous zinc ion batteries is still facing several challenges such as dendrite growth and side reactions(e.g., hydrogen evolution), which cause poor reversibility and the failure of batteries. To address these issues, interfacial modification of Zn anodes has received great attention by tuning the interaction between the anode and the electrolyte. Herein, we present recent advances in the interfacial modification of zinc anode in this review. Besides, the challenges of reported approaches of interfacial modification are also discussed.Finally, we provide an outlook for the exploration of novel zinc anode for aqueous zinc ion batteries.We hope that this review will be helpful in designing and fabricating dendrite-free and hydrogenevolution-free Zn anodes and promoting the practical application of aqueous rechargeable zinc ion batteries.
基金financial supports from the National Natural Science Foundation of China (51974368)the Fundamental Research Funds of the Central South University,China。
文摘Single-crystal Ni-rich cathode material LiNi0.88Co0.09Al0.03O2(SC) was synthesized by a high-temperature solid-state calcination method. Physicochemical properties of primary and delithiated SC samples were investigated by X-ray diffractometry, X-ray photoelectron spectroscopy, and transmission electron microscopy. Electrochemical performance was characterized by long-term cycling, cyclic voltammetry, and in-situ impedance spectroscopy. The results indicated that high temperature rendered layered oxides to lose lithium/oxygen in the interior and exterior, and induced cationic disordering. Besides, the solid-phase synthesis process promoted phase transformation for electrode materials, causing the coexisting multi-phase in a single particle. High temperature can foster the growth of single particles, but it caused unstable structure of layered phase.
基金supported by the National Natural Science Foundation of China(Grant No.51974368)the Fundamental Research Funds for the Central Universities of Central South University(2019zzts251)。
文摘Ni-rich cathodes exhibit appealing properties,such as high capacity density,low cost,and prominent energy density.However,the inferior ionic conductivity and bulk structural degradation become bottlenecks for Ni-rich cathodes and severely limit their commercial utilization.Traditional coating and doping methods suffer fatal drawbacks in functioning as a unit and cannot radically promote material performance to meet the needs of Li-ion batteries(LIBs).Herein,we successfully devised an ingenious and facile synthetic method to establish Ni-rich oxides with a La_(2)Zr_(2)O_(7) coating and Zr doping.The coating layer improves the ion diffusion kinetics and enhances Li-ion transportation while Zr doping effectively suppresses the phase transition of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cathode.Owing to the synergetic effect of Zr doping and La_(2)Zr_(2)O_(7) coating,the modified material shows prominent initial discharge capacity of 184.7 m Ah g^(-1) at 5℃ and maintains 177.5 m Ah g^(-1) after 100 cycles at 1℃.Overall,the proposed feasible electrode design method can have a far-reaching impact on further fabrication of advanced cathodes for high-performance LIBs.
基金financially supported by the National Natural Science Foundation of China(51974368,51774333)the Hunan Provincial Natural Science Foundation of China(2020JJ2048)。
文摘High-nickel single-crystal layered oxide material has become the most promising cathode material for electric vehicle power battery due to its high energy density.However,this material still suffers from structural degradation during cycling and especially the severe interfacial reactions at elevated temperatures that exacerbate irreversible capacity loss.Here,a simple strategy was used to construct a dualfunction Li_(1.5)Al_(0.5)Ge_(1.5)P_(3)O_(12)(LAGP)protective layer on the surface of the high-nickel single-crystal(SC)cathode material,leading to SC@LAGP material.The strong Al-O bonding effectively inhibits the release of lattice oxygen(O)at elevated temperatures,which is supported by the positive formation energy of O vacancy from first-principal calculations.Besides,theoretical calculations demonstrate that the appropriate amount of Al doping accelerates the electron and Li^(+)transport,and thus reduces the kinetic barriers.In addition,the LAGP protective layer alleviates the stress accumulation during cycling and effectively reduces the erosion of materials from the electrolyte decomposition at elevated temperatures.The obtained SC@LAGP cathode material demonstrates much enhanced cycling stability even at high voltage(4.6 V)and elevated temperature(55℃),with a high capacity retention of 91.3%after 100 cycles.This work reports a simple dual-function coating strategy that simultaneously stabilizes the structure and interface of the single-crystal cathode material,which can be applied to design other cathode materials.
基金supported by the National Natural Science Foundation of China(51974368)the Hunan Provincial Natural Science Foundation of China(2020JJ2048)the Natural Science Foundation of Hunan Province China(2021JJ30823)。
文摘Zinc metal anodes face several challenges,including the uncontrolled formation of dendrites,hydrogen evolution,and corrosion,which seriously hinder their application in practice.To address the above problems such as dendrite formation and corrosion,we present a simple and applicable immersion method that enables in situ formation of a zinc phytate(PAZ)coating on the surface of commercial Zn flakes via a substitution reaction.This protective coating mitigates corrosion of zinc flakes by the electrolyte,reduces the interfacial impedance,and accelerates the migration kinetics of zinc ions.Besides,this method can preferentially expose the(002)crystal plane with strong atomic bonding,which not only improves the corrosion resistance of the zinc flake,but can also guide the parallel deposition of zinc ions along the(002)crystal plane and reduce the formation of dendrites.Benefiting from the above advantages,the PAZ@Zn‖Cu half-cell has shown over 900 cycles with average coulombic efficiency(CE)of99.81%at 4 mA cm^(-2).Besides,the PAZ@Zn‖PAZ@Zn symmetric cell operate stably for>1000 h at5 mA cm^(-2)and>340 h at 10 mA cm^(-2).Furthermore,we demonstrated that this in situ chemical treatment enables the formation of a robust,well-bound protective coating.This method provides insights for advancing the commercialization of zinc anodes and other metal anodes.
基金This work was supported by the National Natural Science Foundation of China(Grant No.51974368)This work was supported in part by the High Performance Computing Center of Central South UniversityThis work was supported by the Beamlines 1W1B-XAFS at BSRF.
文摘Ion exchange is a promising synthetic method for alleviating severe cation mixing in traditional layered oxide materials for lithium-ion batteries,leading to enhanced structural stability.However,the underlying mechanisms of ion exchange are still not fully understood.Such a fundamental study of the ion-exchange mechanism is needed for achieving the controllable synthesis of layered oxides with a stable structure.Herein,we thoroughly unearth the underlying mechanism that triggers the ion exchange of Ni-rich materials in aqueous solutions by examining time-resolved structural evolution combined with theoretical calculations.Our results reveal that the reaction pathway of ion exchange can be divided into two steps:protonation and lithiation.The proton is the key to achieving charge balance in the ion exchange process,as revealed by X-ray adsorption spectroscopy and inductive coupled plasma analysis.In addition,the intermediate product shows high lattice distortion during ion exchange,but it ends up with a most stable product with high lattice energy.Such apparent discrepancies in lattice energy between materials before and after ion exchange emphasize the importance of synthetic design in structural stability.This work provides new insights into the ion-exchange synthesis of Ni-rich oxide materials,which advances the development of cathode materials for high-performance lithium-ion batteries.
基金the National Natural Science Foundation of China(Grant Nos.51974368 and 51774333).
文摘Lithium-ion batteries(LIBs)represent the most promising choice for meeting the ever-growing demand of society for various electric applications,such as electric transportation,portable electronics,and grid storage.Nickel-rich layered oxides have largely replaced LiCoO_(2)in commercial batteries because of their low cost,high energy density,and good reliability.Traditional nickel-based oxide particles,usually called polycrystal materials,are composed of microsized primary particles.However,polycrystal particles tend to suffer from pulverization and severe side reactions along grain boundaries during cycling.These phenomena accelerate cell degradation.Single-crystal materials,which exhibit robust mechanical strength and a high surface area,have great potential to address the challenges that hinder their polycrystal counterparts.A comprehensive understanding of the growing body of research related to single-crystal materials is imperative to improve the performance of cathodes in LIBs.This review highlights origins,recent developments,challenges,and opportunities for single-crystal layered oxide cathodes.The synthesis science behind single-crystal materials and comparative studies between single-crystal and polycrystal materials are discussed in detail.Industrial techniques and facilities are also reviewed in combination with our group’s experiences in single-crystal research.Future development should focus on facile production with strong control of the particle size and distribution,structural defects,and impurities to fully reap the benefits of single-crystal materials.
