Oxygen and nitrogen-functionalized carbon nanotubes （OCNTs and NCNTs） were applied as metal-free catalysts in selective olefin hydro- genation. A series of NCNTs was synthesized by NH3 post-treatment of OCNTs. Tempe...Oxygen and nitrogen-functionalized carbon nanotubes （OCNTs and NCNTs） were applied as metal-free catalysts in selective olefin hydro- genation. A series of NCNTs was synthesized by NH3 post-treatment of OCNTs. Temperature-programmed desorption, N2 physisorption, Raman spectroscopy, high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy were employed to characterize the surface properties of OCNTs and NCNTs, aiming at a detailed analysis of the type and amount of oxygen- and nitrogen-containing groups as well as surface defects. The gas-phase treatments applied for oxygen and nitrogen functionalization at elevated temperatures up to 600 ℃ led to the increase of surface defects, but did not cause structural damages in the bulk. NCNTs showed a clearly higher activity than the pristine CNTs and OCNTs in the hydrogenation of 1,5-cyclooctadiene, and also the selectivity to cyclooctene was higher. The favorable catalytic properties are ascribed to the nitrogen-containing surface functional groups as well as surface defects related to nitrogen species. In contrast, oxygen-containing surface groups and the surface defects caused by oxygen species did not show clear contribution to the hydrogenation catalysis.展开更多
Nitrogen-doped carbon nanotubes（NCNTs） were synthesized by chemical vapor deposition using cobaltbased oxides as catalyst and ethylenediamine（EDA） as carbon/nitrogen precursor. The influence of growth time,EDA con...Nitrogen-doped carbon nanotubes（NCNTs） were synthesized by chemical vapor deposition using cobaltbased oxides as catalyst and ethylenediamine（EDA） as carbon/nitrogen precursor. The influence of growth time,EDA concentration and growth temperature on the morphology,yield,composition,graphitization and oxidation resistance of the NCNTs was systematically investigated by using Raman spectroscopy,temperature-programmed oxidation and other techniques. The NCNT growth from ethylenediamine with a high N/C ratio involves several processes including mainly（1） catalytic growth of NCNTs,（2） homogeneous gas-phase decomposition of EDA,（3） non-catalytic deposition of pyrolytic carbon/nitrogen species and（4）surface etching of amorphous carbon or carbon at defect sites through gasification. At a later growth stage the etching process appears to be dominating,leading to the thinning of nanotubes and the decrease of yield.Moreover,the surface etching through carbon gasification strongly influences the structure and degree of graphitization of NCNTs.展开更多
RuO2 nanoparticles supported on multi-walled carbon nanotubes（CNTs） functionalized with oxygen（OCNTs） and nitrogen（NCNTs） were employed for the oxygen evolution reaction（OER） in 0.1 M KOH.The catalysts were sy...RuO2 nanoparticles supported on multi-walled carbon nanotubes（CNTs） functionalized with oxygen（OCNTs） and nitrogen（NCNTs） were employed for the oxygen evolution reaction（OER） in 0.1 M KOH.The catalysts were synthesized by metal-organic chemical vapor deposition using ruthenium carbonyl（Ru3（CO）（12）） as Ru precursor. The obtained RuO2/OCNT and RuO2/NCNT composites were characterized using TEM, H2-TPR, XRD and XPS in order probe structure–activity correlations, particularly, the effect of the different surface functional groups on the electrochemical OER performance. The electrocatalytic activity and stability of the catalysts with mean RuO2 particle sizes of 13–14 nm was evaluated by linear sweep voltammetry, cyclic voltammetry, and chronopotentiometry, showing that the generation of nitrogen-containing functional groups on CNTs was beneficial for both OER activity and stability. In the presence of RuO2, carbon corrosion was found to be significantly less severe.展开更多
基金supported by the German Federal Ministry of Education and Research (BMBF) for the CarboKat Project (03X0204D) within the scope of the Inno.CNT Alliance
文摘Oxygen and nitrogen-functionalized carbon nanotubes （OCNTs and NCNTs） were applied as metal-free catalysts in selective olefin hydro- genation. A series of NCNTs was synthesized by NH3 post-treatment of OCNTs. Temperature-programmed desorption, N2 physisorption, Raman spectroscopy, high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy were employed to characterize the surface properties of OCNTs and NCNTs, aiming at a detailed analysis of the type and amount of oxygen- and nitrogen-containing groups as well as surface defects. The gas-phase treatments applied for oxygen and nitrogen functionalization at elevated temperatures up to 600 ℃ led to the increase of surface defects, but did not cause structural damages in the bulk. NCNTs showed a clearly higher activity than the pristine CNTs and OCNTs in the hydrogenation of 1,5-cyclooctadiene, and also the selectivity to cyclooctene was higher. The favorable catalytic properties are ascribed to the nitrogen-containing surface functional groups as well as surface defects related to nitrogen species. In contrast, oxygen-containing surface groups and the surface defects caused by oxygen species did not show clear contribution to the hydrogenation catalysis.
基金supported by the German Federal Ministry of Education and Research(BMBF) through the Project "Carbo Elch"(Grant 03X0207C) within the scope of the Inno.CNT Alliancethe IMPRS-Sur Mat of the Max-Planck Society
文摘Nitrogen-doped carbon nanotubes（NCNTs） were synthesized by chemical vapor deposition using cobaltbased oxides as catalyst and ethylenediamine（EDA） as carbon/nitrogen precursor. The influence of growth time,EDA concentration and growth temperature on the morphology,yield,composition,graphitization and oxidation resistance of the NCNTs was systematically investigated by using Raman spectroscopy,temperature-programmed oxidation and other techniques. The NCNT growth from ethylenediamine with a high N/C ratio involves several processes including mainly（1） catalytic growth of NCNTs,（2） homogeneous gas-phase decomposition of EDA,（3） non-catalytic deposition of pyrolytic carbon/nitrogen species and（4）surface etching of amorphous carbon or carbon at defect sites through gasification. At a later growth stage the etching process appears to be dominating,leading to the thinning of nanotubes and the decrease of yield.Moreover,the surface etching through carbon gasification strongly influences the structure and degree of graphitization of NCNTs.
基金the IMPRS-Sur Mat of the Max Planck Society for a research grant
文摘RuO2 nanoparticles supported on multi-walled carbon nanotubes（CNTs） functionalized with oxygen（OCNTs） and nitrogen（NCNTs） were employed for the oxygen evolution reaction（OER） in 0.1 M KOH.The catalysts were synthesized by metal-organic chemical vapor deposition using ruthenium carbonyl（Ru3（CO）（12）） as Ru precursor. The obtained RuO2/OCNT and RuO2/NCNT composites were characterized using TEM, H2-TPR, XRD and XPS in order probe structure–activity correlations, particularly, the effect of the different surface functional groups on the electrochemical OER performance. The electrocatalytic activity and stability of the catalysts with mean RuO2 particle sizes of 13–14 nm was evaluated by linear sweep voltammetry, cyclic voltammetry, and chronopotentiometry, showing that the generation of nitrogen-containing functional groups on CNTs was beneficial for both OER activity and stability. In the presence of RuO2, carbon corrosion was found to be significantly less severe.
