Insulating polymers are characterized by a predominantlyσ-covalent structure,which localize electrons in the atoms and exhibit dielectricity.Insulating polymers typically adopt a more linear and extended conformation...Insulating polymers are characterized by a predominantlyσ-covalent structure,which localize electrons in the atoms and exhibit dielectricity.Insulating polymers typically adopt a more linear and extended conformation,as the repeating units are connected by single covalent bonds,resulting in a relatively straight and extended chain structure.For most insulating polymers,the contour length(L_(c))is significantly larger than their persistence length(Lp)due to the rotation of C−C single bonds(Fig.1(a)).Consequently,this leads to a flexible,random-coil chain conformation.This structural feature contributes to the great mechanical durability and resistance to crack initiation during stretching or bending processes.In contrast,conjugated polymers possess aπ-conjugated molecular structure,allowing electron mobility along the main chain,called delocalization,which imparts semiconducting properties[1,2].The presence of rigid,alternating single and multiple bonds results in comparable Lc and Lp,thereby yielding a stiff or semi-flexible conformation(Fig.1(b))[3,4].As a consequence,most conjugated polymers are prone to fracture under low strain levels(<10%)[5−7].展开更多
Quasi-2D Dion-Jacobson(DJ)tin halide perovskite has attracted much attention due to its elimination of Van der Waals gap and enhanced environmental stability.However,the bulky organic spacers usually form a natural qu...Quasi-2D Dion-Jacobson(DJ)tin halide perovskite has attracted much attention due to its elimination of Van der Waals gap and enhanced environmental stability.However,the bulky organic spacers usually form a natural quantum well structure,which brings a large quantum barrier and poor film quality,further limiting the carrier transport and device performance.Here,we designed three organic spacers with different chain lengths(ethylenediamine(EDA),1,3-propanediamine(PDA),and 1,4-butanediamine(BDA))to investigate the quantum barrier dependence.Theoretical and experimental characterizations indicate that EDA with short chain can reduce the lattice distortion and dielectric confinement effect,which is beneficial to the effective dissociation of excitons and the inhibition of trap-free non-radiative relaxation.In addition,EDA cation shows strong interaction with the inorganic octahedron,realizing large aggregates in precursor solution and high-quality films with improved structural stability.Furthermore,femtosecond transient absorption proves that EDA cations can also weaken the formation of small n-phases with large quantum barrier to achieve effective carrier transport between different nphases.Finally,the quasi-2D DJ(EDA)FA_(9)Sn_(10)I_(31)solar cells achieves a 7.07%power conversion efficiency with good environment stability.Therefore,this work sheds light on the regulation of the quantum barrier and carrier transport through the chain length of organic spacer for qua si-2D DJ lead-free perovskites.展开更多
In recent years,organic solar cells(OSCs)have garnered significant attention due to their distinctive attributes,such as flexibility,lightweight,and solution processing,which position them as alternatives for next-gen...In recent years,organic solar cells(OSCs)have garnered significant attention due to their distinctive attributes,such as flexibility,lightweight,and solution processing,which position them as alternatives for next-generation solar technologies[1−5].Thanks to breakthroughs in materials development,the power conversion efficiency(PCE)for single-junction OSCs has already surpassed 19%[6−13].The development of photoactive materials is pivotal in enhancing the PCEs,and several reviews have provided insights into materials design[14−18].Herein,we highlight single-junction OSCs based on D18 and its derivatives[19,20].展开更多
Since the successful exfoliation of graphene in 2014,twodimensional(2D)materials have explosively increased in the past few years[1].2D pnictogen materials with intriguing properties beyond graphene are gradually comi...Since the successful exfoliation of graphene in 2014,twodimensional(2D)materials have explosively increased in the past few years[1].2D pnictogen materials with intriguing properties beyond graphene are gradually coming into eyesight,such as black phosphorous(BP)[2],arsenene[3],antimonene[4],bismuthine[5],etc.BP is a star material in 2D materials.展开更多
The high efficiency,solution processibility,and flexibility of perovskite solar cells make them promising candidates for the photovoltaic industry[1−8].The deposition method is one of the most critical factors that af...The high efficiency,solution processibility,and flexibility of perovskite solar cells make them promising candidates for the photovoltaic industry[1−8].The deposition method is one of the most critical factors that affect the performance of perovskite films.Various deposition methods have been developed to make perovskite films,including spin-coating,slotdie coating.展开更多
The power conversion efficiency(PCE)for single-junction organic solar cells(OSCs),wherein the photoactive layer is a typical bulk-heterojunction containing donor and acceptor materials,has surpassed 19%[1−4].The advan...The power conversion efficiency(PCE)for single-junction organic solar cells(OSCs),wherein the photoactive layer is a typical bulk-heterojunction containing donor and acceptor materials,has surpassed 19%[1−4].The advance is ascribed to the development of Y-series non-fullerene acceptors(NFAs)[5,6]and polymer donors[7−13],and the refined control of the blend film morphology.展开更多
Metal halide perovskites are promising materials for solar cells because of high power conversion efficiency(PCE),tun-able bandgap,high defect tolerance,long carrier diffusion length,and low-cost fabrication[1-7].The ...Metal halide perovskites are promising materials for solar cells because of high power conversion efficiency(PCE),tun-able bandgap,high defect tolerance,long carrier diffusion length,and low-cost fabrication[1-7].The PCE for perovskite solar cells(PSCs)reaches 26.14%for single-junction cells,29.1%for perovskite/perovskite tandem cells and 33.9%for perovskite/silicon tandem cells,being comparable to that for silicon and other thin-film solar cells[8-10].Perovskite solar cells have been made by solution methods including spin-coat-ing,blade coating and printing[11,12].展开更多
Organic–inorganic hybrid perovskite materials demonstrate promising applications in high-efficiency perovskite solar cells (PSCs) with a certified power conversion efficiency(PCE) of 25.5%(https://www.nrel.gov/pv/cel...Organic–inorganic hybrid perovskite materials demonstrate promising applications in high-efficiency perovskite solar cells (PSCs) with a certified power conversion efficiency(PCE) of 25.5%(https://www.nrel.gov/pv/cell-efficiency.html).展开更多
Nowadays, the soar of photovoltaic performance of perovskite solar cells has set off a fever in the study of metal halide perovskite materials. The excellent optoelectronic properties and defect tolerance feature allo...Nowadays, the soar of photovoltaic performance of perovskite solar cells has set off a fever in the study of metal halide perovskite materials. The excellent optoelectronic properties and defect tolerance feature allow metal halide perovskite to be employed in a wide variety of applications. This article provides a holistic review over the current progress and future prospects of metal halide perovskite materials in representative promising applications, including traditional optoelectronic devices(solar cells, light-emitting diodes, photodetectors, lasers), and cutting-edge technologies in terms of neuromorphic devices(artificial synapses and memristors) and pressure-induced emission. This review highlights the fundamentals, the current progress and the remaining challenges for each application, aiming to provide a comprehensive overview of the development status and a navigation of future research for metal halide perovskite materials and devices.展开更多
The emergence of Y6-type nonfullerene acceptors has greatly enhanced the power conversion efficiency(PCE)of organic solar cells(OSCs).However,which structural feature is responsible for the excellent photovoltaic perf...The emergence of Y6-type nonfullerene acceptors has greatly enhanced the power conversion efficiency(PCE)of organic solar cells(OSCs).However,which structural feature is responsible for the excellent photovoltaic performance is still under debate.In this study,two Y6-like acceptors BDOTP-1 and BDOTP-2 were designed.Different from previous Y6-type acceptors featuring an A–D–Aʹ–D–A structure,BDOTP-1,and BDOTP-2 have no electron-deficient Aʹfragment in the core unit.Instead,there is an electron-rich dibenzodioxine fragment in the core.Although this modification leads to a marked change in the molecular dipole moment,electrostatic potential,frontier orbitals,and energy levels,BDOTP acceptors retain similar three-dimensional packing capability as Y6-type acceptors due to the similar banana-shaped molecular configuration.BDOTP acceptors show good performance in OSCs.High PCEs of up to 18.51%(certified 17.9%)are achieved.This study suggests that the banana-shaped configuration instead of the A–D–Aʹ–D–A structure is likely to be the determining factor in realizing high photovoltaic performance.展开更多
After fast developing of single-junction perovskite solar cells and organic solar cells in the past 10 years,it is becoming harder and harder to improve their power conversion efficiencies.Tandem solar cells are recei...After fast developing of single-junction perovskite solar cells and organic solar cells in the past 10 years,it is becoming harder and harder to improve their power conversion efficiencies.Tandem solar cells are receiving more and more attention because they have much higher theoretical efficiency than single-junction solar cells.Good device performance has been achieved for perovskite/silicon and perovskite/perovskite tandem solar cells,including 2-terminal and 4-terminal structures.However,very few studies have been done about 4-terminal inorganic perovskite/organic tandem solar cells.In this work,semi-transparent inorganic perovskite solar cells and organic solar cells are used to fabricate 4-terminal inorganic perovskite/organic tandem solar cells,achieving a power conversion efficiency of 21.25%for the tandem cells with spin-coated perovskite layer.By using drop-coating instead of spin-coating to make the inorganic perovskite films,4-terminal tandem cells with an efficiency of 22.34%are made.The efficiency is higher than the reported 2-terminal and 4-terminal inorganic perovskite/organic tandem solar cells.In addition,equivalent 2-terminal tandem solar cells were fabricated by connecting the sub-cells in series.The stability of organic solar cells under continuous illumination is improved by using semi-transparent perovskite solar cells as filter.展开更多
Polarization means symmetry loss for light vibration along light propagation direction,which is a particular physical property of light.The polarization state is indecipherable for most polarization-insensitive detect...Polarization means symmetry loss for light vibration along light propagation direction,which is a particular physical property of light.The polarization state is indecipherable for most polarization-insensitive detectors.Polarization can carry and differentiate light information,and can be used in polarized light detection,polarization imaging and encryption communication[1].Photodetectors are the core component of some photoelectric devices[2]used in biomedical sensing,remote sensing,military field,etc.展开更多
Chalcopyrite,copper indium gallium selenide(Cu(In,Ga)Se_(2),CIGS),as semiconductor materials,have been widely used as absorbers in thin-film solar cells,offering high power conversion efficiency(PCE)and good thermal s...Chalcopyrite,copper indium gallium selenide(Cu(In,Ga)Se_(2),CIGS),as semiconductor materials,have been widely used as absorbers in thin-film solar cells,offering high power conversion efficiency(PCE)and good thermal stability[1−3].Recently,the development of non-traditional photovoltaic(PV)devices such as semitransparent.展开更多
Perovskite solar cells(PSCs)have attracted much attention due to their low cost,high efficiency and easy processing.Recently,You et al.achieved a record efficiency of 26.1%(certified 25.6%)in PSCs with excellent stabi...Perovskite solar cells(PSCs)have attracted much attention due to their low cost,high efficiency and easy processing.Recently,You et al.achieved a record efficiency of 26.1%(certified 25.6%)in PSCs with excellent stability[1].Excess PbI_(2) in perovskite films was converted into inactive(PbI_(2))2RbCl to avoid its detrimental effect to device stability,while maintaining its positive effect to device efficiency.展开更多
Perovskite solar cells(PSCs)have attracted aggressive attention in the photovoltaic field in light of the rapid increasing power conversion efficiency.However,their large-scale application and commercialization are li...Perovskite solar cells(PSCs)have attracted aggressive attention in the photovoltaic field in light of the rapid increasing power conversion efficiency.However,their large-scale application and commercialization are limited by the toxicity issue of lead(Pb).Among all the lead-free perovskites,tin(Sn)-based perovskites have shown potential due to their low toxicity,ideal bandgap structure,high carrier mobility,and long hot carrier lifetime.Great progress of Sn-based PSCs has been realized in recent years,and the certified efficiency has now reached over 14%.Nevertheless,this record still falls far behind the theoretical calculations.This is likely due to the uncontrolled nucleation states and pronounced Sn(Ⅳ)vacancies.With insights into the methodologies resolving both issues,ligand engineering-assisted perovskite film fabrication dictates the state-of-the-art Sn-based PSCs.Herein,we summarize the role of ligand engineering during each state of film fabrication,ranging from the starting precursors to the ending fabricated bulks.The incorporation of ligands to suppress Sn~(2+)oxidation,passivate bulk defects,optimize crystal orientation,and improve stability is discussed,respectively.Finally,the remained challenges and perspectives toward advancing the performance of Sn-based PSCs are presented.We expect this review can draw a clear roadmap to facilitate Sn-based PSCs via ligand engineering.展开更多
Tin halide perovskites(THPs)have received extensive attention due to their low toxicity and excellent optoelectronic properties,and are considered to be the most promising alternatives to develop efficient lead-free p...Tin halide perovskites(THPs)have received extensive attention due to their low toxicity and excellent optoelectronic properties,and are considered to be the most promising alternatives to develop efficient lead-free perovskite solar cells.However,due to the unique and inherent characteristics of Sn^(2+)being easily oxidized to Sn^(4+)and fast crystallization,tin perovskite solar cells(TPSCs)show relatively poor performance and stability,compared to the lead counterparts.Recently,the introduction of bulky organic spacers into three-dimensional(3D)THPs for dimensional regulation can not only prevent the intrusion of water and oxygen,but also inhibit the self-doping effect and ion migration.In this review,we will detail how dimensional regulation enables TPSCs with high performance and superior stability.First,we summarize the intrinsic properties of THPs and analyze the root causes of their poor performance and instability.Next,we discuss the specific structure and types of the dimensional regulation strategy.Then,the mechanism of dimensional regulation is discussed in detail,mainly from inhibiting the Sn^(2+)oxidation,optimizing crystallization,passivating defects,and improving energy level alignment.Finally,future challenges and prospects for dimensional regulation are elaborated to help researchers develop more efficient and stable TPSCs.展开更多
Perovskite solar cells(PSCs)have become the represent-atives of next generation of photovoltaics;nevertheless,their stability is insufficient for large scale deployment,particularly the reverse bias stability.Here,we ...Perovskite solar cells(PSCs)have become the represent-atives of next generation of photovoltaics;nevertheless,their stability is insufficient for large scale deployment,particularly the reverse bias stability.Here,we propose a transparent conducting oxide(TCO)and low-cost metal composite electrode to improve the stability of PSCs without sacrificing the efficiency.The TCO can block ion migrations and chemical reactions between the metal and perovskite,while the metal greatly enhances the conductivity of the composite electrode.As a result,composite electrode-PSCs achieved a power conversion efficiency(PCE)of 23.7%(certified 23.2%)and exhibited excellent stability,maintaining 95%of the initial PCE when applying a reverse bias of 4.0 V for 60 s and over 92%of the initial PCE after 1000 h continuous light soaking.This composite electrode strategy can be extended to different combinations of TCOs and metals.It opens a new avenue for improving the stability of PSCs.展开更多
Lead-free inorganic copper-silver-bismuth-halide materials have attracted more and more attention due to their environmental friendliness,high element abundance,and low cost.Here,we developed a strategy of one-step ga...Lead-free inorganic copper-silver-bismuth-halide materials have attracted more and more attention due to their environmental friendliness,high element abundance,and low cost.Here,we developed a strategy of one-step gas-solid-phase diffusioninduced reaction to fabricate a series of bandgap-tunable Cu_(a)Agm_(1)Bim_(2)I_(n)/CuI bilayer films due to the atomic diffusion effect for the first time.By designing and regulating the sputtered Cu/Ag/Bi metal film thickness,the bandgap of Cu_(a)Agm_(1)Bim_(2)I_(n)/CuI could be reduced from 2.06 to 1.78 eV.Solar cells with the structure of FTO/TiO_(2)/Cu_(a)Agm_(1)Bim_(2)I_(n)/CuI/carbon were constructed,yielding a champion power conversion efficiency of 2.76%,which is the highest reported for this class of materials owing to the bandgap reduction and the peculiar bilayer structure.The current work provides a practical path for developing the next generation of efficient,stable,and environmentally friendly photovoltaic materials.展开更多
Tandem solar cells based on metal halide perovskites are advancing rapidly during last few years[1–17].The certified power conversion efficiency(PCE)for monolithic perovskite/silicon tandem solar cell reaches 32.5%[1...Tandem solar cells based on metal halide perovskites are advancing rapidly during last few years[1–17].The certified power conversion efficiency(PCE)for monolithic perovskite/silicon tandem solar cell reaches 32.5%[18].Since tandem solar cells contain more layers than single-junction solar cells,stress/strain control is an issue during fabrication and further practical operation.The stress can not only affect the stability of the perovskite layer but also change the optoelectronic properties of the films[19–23].展开更多
The interfaces of perovskite solar cells(PSCs)are well known to be rich in deep-level carrier traps,which serve as non-radiative recombination centers and limit the open-circuit voltage(Voc)and power conversion effici...The interfaces of perovskite solar cells(PSCs)are well known to be rich in deep-level carrier traps,which serve as non-radiative recombination centers and limit the open-circuit voltage(Voc)and power conversion efficiency(PCE)of PSCs.Defect chemistry and surface passivators have been researched extensively and mainly focused on the neutralization of uncoordinated lead or anion defects.Herein,a novel brominated passivator 2-bromophenethylammonium iodide(2-Br-PEAI)is introduced for a multi-functional passivation effect at the perovskite interface.The brominated species readily form 2D perovskite on top of the 3D perovskite and multi-interact with the 3D perovskite surface.Apart from the halide vacancy filling and anion bonding ability,the Br atoms on the benzene ring can interact with the FA cations via strong hydrogen bonding N-H…Br and interact with the[PbI_(6)]^(4−)inorganic framework.The interface defects in the PSCs are well passivated,minimizing non-radiative recombination and enhancing device performance.As a result,a champion PCE of 24.22%was achieved with high V_(oc)and fill factor.In addition,modified devices also showed enhanced operational stability(retention of>95%initial PCE after 400 h)and humidity resistance(>90%initial PCE maintained after 1500 h under~50%RH).展开更多
基金supported by Ministry of Science and Technology(2018YFA0208504)the Beijing Natural Science Foundation(JQ21006,2212045)+6 种基金National Natural Science Foundation of China(92163128,52073016)supported by the Fundamental Research Funds for the Central Universities(buctrc201828,XK1802-2)Open Project of State Key Laboratory of Organic-Inorganic Composites(oic-202201006)Open Project of State Key Laboratory of Supramolecular Structure and Materials(sklssm2023010)L.Ding thanks the National Key Research and Development Program of China(2022YFB3803300)the open research fund of Songshan Lake Materials Laboratory(2021SLABFK02)he National Natural Science Foundation of China(21961160720).
文摘Insulating polymers are characterized by a predominantlyσ-covalent structure,which localize electrons in the atoms and exhibit dielectricity.Insulating polymers typically adopt a more linear and extended conformation,as the repeating units are connected by single covalent bonds,resulting in a relatively straight and extended chain structure.For most insulating polymers,the contour length(L_(c))is significantly larger than their persistence length(Lp)due to the rotation of C−C single bonds(Fig.1(a)).Consequently,this leads to a flexible,random-coil chain conformation.This structural feature contributes to the great mechanical durability and resistance to crack initiation during stretching or bending processes.In contrast,conjugated polymers possess aπ-conjugated molecular structure,allowing electron mobility along the main chain,called delocalization,which imparts semiconducting properties[1,2].The presence of rigid,alternating single and multiple bonds results in comparable Lc and Lp,thereby yielding a stiff or semi-flexible conformation(Fig.1(b))[3,4].As a consequence,most conjugated polymers are prone to fracture under low strain levels(<10%)[5−7].
基金financially supported by the National Key Research and Development Program of China(2022YFE0118400)the National Natural Science Foundation of China(51702038)+1 种基金the Science&Technology Department of Sichuan Province(2020YFG0061)the Recruitment Program for Young Professionals。
文摘Quasi-2D Dion-Jacobson(DJ)tin halide perovskite has attracted much attention due to its elimination of Van der Waals gap and enhanced environmental stability.However,the bulky organic spacers usually form a natural quantum well structure,which brings a large quantum barrier and poor film quality,further limiting the carrier transport and device performance.Here,we designed three organic spacers with different chain lengths(ethylenediamine(EDA),1,3-propanediamine(PDA),and 1,4-butanediamine(BDA))to investigate the quantum barrier dependence.Theoretical and experimental characterizations indicate that EDA with short chain can reduce the lattice distortion and dielectric confinement effect,which is beneficial to the effective dissociation of excitons and the inhibition of trap-free non-radiative relaxation.In addition,EDA cation shows strong interaction with the inorganic octahedron,realizing large aggregates in precursor solution and high-quality films with improved structural stability.Furthermore,femtosecond transient absorption proves that EDA cations can also weaken the formation of small n-phases with large quantum barrier to achieve effective carrier transport between different nphases.Finally,the quasi-2D DJ(EDA)FA_(9)Sn_(10)I_(31)solar cells achieves a 7.07%power conversion efficiency with good environment stability.Therefore,this work sheds light on the regulation of the quantum barrier and carrier transport through the chain length of organic spacer for qua si-2D DJ lead-free perovskites.
基金J.Yang thanks the National Key Research and Development Program of China(2022YFB3803300)the National Natural Science Foundation of China(U23A20138 and 52173192)+1 种基金L.Ding thanks the National Key Research and Development Program of China(2022YFB3803300,2023YFE0116800)Beijing Natural Science Foundation(IS23037).
文摘In recent years,organic solar cells(OSCs)have garnered significant attention due to their distinctive attributes,such as flexibility,lightweight,and solution processing,which position them as alternatives for next-generation solar technologies[1−5].Thanks to breakthroughs in materials development,the power conversion efficiency(PCE)for single-junction OSCs has already surpassed 19%[6−13].The development of photoactive materials is pivotal in enhancing the PCEs,and several reviews have provided insights into materials design[14−18].Herein,we highlight single-junction OSCs based on D18 and its derivatives[19,20].
基金the National Natural Science Foundation of China(22022505 and 21872069)the Fundamental Research Funds for the Central Universities of China(020514380266,020514380272,and 020514380274)+5 种基金the Scientific and Technological Innovation Special Fund for Carbon Peak and Carbon Neutrality of Jiangsu Province(BK20220008)the Scientific and Technological Achievements Transformation Special Fund of Jiangsu Province(BA2023037)the International Collaboration Research Program of Nanjing City(202201007 and 2022SX00000955)the Gusu Leading Talent Program of Scientific and Technological Innovation and Entrepreneurship of Wujiang District in Suzhou City(ZXL2021273)the National Key Research and Development Program of China(2022YFB3803300,2023YFE0116800)Beijing Natural Science Foundation(IS23037).
文摘Since the successful exfoliation of graphene in 2014,twodimensional(2D)materials have explosively increased in the past few years[1].2D pnictogen materials with intriguing properties beyond graphene are gradually coming into eyesight,such as black phosphorous(BP)[2],arsenene[3],antimonene[4],bismuthine[5],etc.BP is a star material in 2D materials.
基金We thank the National Natural Science Foundation of China(52203217 and 21961160720)the National Key Research and Development Program of China(2022YFB3803300)the open research fund of Songshan Lake Materials Laboratory(2021SLABFK02)for financial support.
文摘The high efficiency,solution processibility,and flexibility of perovskite solar cells make them promising candidates for the photovoltaic industry[1−8].The deposition method is one of the most critical factors that affect the performance of perovskite films.Various deposition methods have been developed to make perovskite films,including spin-coating,slotdie coating.
基金supported by the National Natural Science Foundation of China (52373175)High-level Innovative Talents Foundation of Guizhou Province (QKHPTRCGCC[2023]024)+3 种基金Science and Technology Innovation Team of Higher Education Department of Guizhou Province(QJJ[2023]053)Natural Science Foundation of Guizhou University (GZUTGH[2023]12, GZUTGH[2023]71)National Key Research and Development Program of China(2022YFB3803300, 2023YFE0116800)Beijing Natural Science Foundation (IS23037)
文摘The power conversion efficiency(PCE)for single-junction organic solar cells(OSCs),wherein the photoactive layer is a typical bulk-heterojunction containing donor and acceptor materials,has surpassed 19%[1−4].The advance is ascribed to the development of Y-series non-fullerene acceptors(NFAs)[5,6]and polymer donors[7−13],and the refined control of the blend film morphology.
基金We thank the Key Research and Development Project of Anhui Province(2023t07020005)Natural Science Foundation of Anhui Province(2308085QE137)+2 种基金Anhui Innovation&Entrepreneurship Support Plan for Returned Overseas Students(2022LCX018)L.Ding thanks the Nation al Key Research and Development Program of China(2022YFB3803300,2023YFE0116800)Beijing Natural Science Foundation(IS23037).
文摘Metal halide perovskites are promising materials for solar cells because of high power conversion efficiency(PCE),tun-able bandgap,high defect tolerance,long carrier diffusion length,and low-cost fabrication[1-7].The PCE for perovskite solar cells(PSCs)reaches 26.14%for single-junction cells,29.1%for perovskite/perovskite tandem cells and 33.9%for perovskite/silicon tandem cells,being comparable to that for silicon and other thin-film solar cells[8-10].Perovskite solar cells have been made by solution methods including spin-coat-ing,blade coating and printing[11,12].
基金supported by the National Key Research and Development Program of China (2017YFA0402800)National Natural Science Foundation of China (51925206,U1932214)+2 种基金Collaborative Innovation Program of Hefei Science Center (2020HSC-CIP004)the National Key Research and Development Program of China(2017YFA0206600)the National Natural Science Foundation of China (51773045, 21772030, 51922032, 21961160720)for financial support。
文摘Organic–inorganic hybrid perovskite materials demonstrate promising applications in high-efficiency perovskite solar cells (PSCs) with a certified power conversion efficiency(PCE) of 25.5%(https://www.nrel.gov/pv/cell-efficiency.html).
基金the National Key Research and Development Program of China (2022YFB3803300)the open research fund of Songshan Lake Materials Laboratory (2021SLABFK02)the National Natural Science Foundation of China (21961160720)。
文摘Nowadays, the soar of photovoltaic performance of perovskite solar cells has set off a fever in the study of metal halide perovskite materials. The excellent optoelectronic properties and defect tolerance feature allow metal halide perovskite to be employed in a wide variety of applications. This article provides a holistic review over the current progress and future prospects of metal halide perovskite materials in representative promising applications, including traditional optoelectronic devices(solar cells, light-emitting diodes, photodetectors, lasers), and cutting-edge technologies in terms of neuromorphic devices(artificial synapses and memristors) and pressure-induced emission. This review highlights the fundamentals, the current progress and the remaining challenges for each application, aiming to provide a comprehensive overview of the development status and a navigation of future research for metal halide perovskite materials and devices.
基金the open research fund of the Songshan Lake Materials Laboratory(2021SLABFK02)the National Key Research and Development Program of China(2017YFA0206600)the National Natural Science Foundation of China(51922032 and 21961160720).
文摘The emergence of Y6-type nonfullerene acceptors has greatly enhanced the power conversion efficiency(PCE)of organic solar cells(OSCs).However,which structural feature is responsible for the excellent photovoltaic performance is still under debate.In this study,two Y6-like acceptors BDOTP-1 and BDOTP-2 were designed.Different from previous Y6-type acceptors featuring an A–D–Aʹ–D–A structure,BDOTP-1,and BDOTP-2 have no electron-deficient Aʹfragment in the core unit.Instead,there is an electron-rich dibenzodioxine fragment in the core.Although this modification leads to a marked change in the molecular dipole moment,electrostatic potential,frontier orbitals,and energy levels,BDOTP acceptors retain similar three-dimensional packing capability as Y6-type acceptors due to the similar banana-shaped molecular configuration.BDOTP acceptors show good performance in OSCs.High PCEs of up to 18.51%(certified 17.9%)are achieved.This study suggests that the banana-shaped configuration instead of the A–D–Aʹ–D–A structure is likely to be the determining factor in realizing high photovoltaic performance.
基金We thank the National Key Research and Development Program of China(2022YFB3803300)the open research fund of Songshan Lake Materials Laboratory(2021SLABFK02)+1 种基金the National Natural Science Foundation of China(21961160720 and 52203217)the China Postdoctoral Science Foundation(2021M690805)for financial support.
文摘After fast developing of single-junction perovskite solar cells and organic solar cells in the past 10 years,it is becoming harder and harder to improve their power conversion efficiencies.Tandem solar cells are receiving more and more attention because they have much higher theoretical efficiency than single-junction solar cells.Good device performance has been achieved for perovskite/silicon and perovskite/perovskite tandem solar cells,including 2-terminal and 4-terminal structures.However,very few studies have been done about 4-terminal inorganic perovskite/organic tandem solar cells.In this work,semi-transparent inorganic perovskite solar cells and organic solar cells are used to fabricate 4-terminal inorganic perovskite/organic tandem solar cells,achieving a power conversion efficiency of 21.25%for the tandem cells with spin-coated perovskite layer.By using drop-coating instead of spin-coating to make the inorganic perovskite films,4-terminal tandem cells with an efficiency of 22.34%are made.The efficiency is higher than the reported 2-terminal and 4-terminal inorganic perovskite/organic tandem solar cells.In addition,equivalent 2-terminal tandem solar cells were fabricated by connecting the sub-cells in series.The stability of organic solar cells under continuous illumination is improved by using semi-transparent perovskite solar cells as filter.
基金the National Key Research and Development Program of China(2022YFB3803300)the open research fund of Songshan Lake Materials Laboratory(2021SLABFK02)the National Natural Science Foundation of China(21961160720)。
文摘Polarization means symmetry loss for light vibration along light propagation direction,which is a particular physical property of light.The polarization state is indecipherable for most polarization-insensitive detectors.Polarization can carry and differentiate light information,and can be used in polarized light detection,polarization imaging and encryption communication[1].Photodetectors are the core component of some photoelectric devices[2]used in biomedical sensing,remote sensing,military field,etc.
基金This work is supported by the National Natural Science Foundation of China(22075150)the National Key Research and Development Program of China(2019YFE0118100)+2 种基金L.Ding thanks the National Key Research and Development Program of China(2022YFB3803300)the open research fund of Songshan Lake Materials Laboratory(2021SLABFK02)the National Natural Science Foundation of China(21961160720).
文摘Chalcopyrite,copper indium gallium selenide(Cu(In,Ga)Se_(2),CIGS),as semiconductor materials,have been widely used as absorbers in thin-film solar cells,offering high power conversion efficiency(PCE)and good thermal stability[1−3].Recently,the development of non-traditional photovoltaic(PV)devices such as semitransparent.
基金the National Key Research and Development Program of China (2022YFB3803300)National Natural Science Foundation of China (62274062, 52173161, 62104070, and 61974150)+2 种基金Shanghai Science and Technology Innovation Action Plan (22dz1205200)the open research fund of Songshan Lake Materials Laboratory (2021SLABFK02)the National Natural Science Foundation of China (21961160720)
文摘Perovskite solar cells(PSCs)have attracted much attention due to their low cost,high efficiency and easy processing.Recently,You et al.achieved a record efficiency of 26.1%(certified 25.6%)in PSCs with excellent stability[1].Excess PbI_(2) in perovskite films was converted into inactive(PbI_(2))2RbCl to avoid its detrimental effect to device stability,while maintaining its positive effect to device efficiency.
基金supported by the National Natural Science Foundation of China(61935016,62275213 and 62205264),the National Natural Science Foundation of China(21961160720)the Fundamental Research Funds for Xi'an Jiaotong University(xzy012022092,xzd012022003 and xzy022022057)+1 种基金the National Key Research and Development Program of China(2022YFB3803300)the open research fund of Songshan Lake Materials Laboratory(2021SLABFK02)。
文摘Perovskite solar cells(PSCs)have attracted aggressive attention in the photovoltaic field in light of the rapid increasing power conversion efficiency.However,their large-scale application and commercialization are limited by the toxicity issue of lead(Pb).Among all the lead-free perovskites,tin(Sn)-based perovskites have shown potential due to their low toxicity,ideal bandgap structure,high carrier mobility,and long hot carrier lifetime.Great progress of Sn-based PSCs has been realized in recent years,and the certified efficiency has now reached over 14%.Nevertheless,this record still falls far behind the theoretical calculations.This is likely due to the uncontrolled nucleation states and pronounced Sn(Ⅳ)vacancies.With insights into the methodologies resolving both issues,ligand engineering-assisted perovskite film fabrication dictates the state-of-the-art Sn-based PSCs.Herein,we summarize the role of ligand engineering during each state of film fabrication,ranging from the starting precursors to the ending fabricated bulks.The incorporation of ligands to suppress Sn~(2+)oxidation,passivate bulk defects,optimize crystal orientation,and improve stability is discussed,respectively.Finally,the remained challenges and perspectives toward advancing the performance of Sn-based PSCs are presented.We expect this review can draw a clear roadmap to facilitate Sn-based PSCs via ligand engineering.
基金financially supported by the National Natural Science Foundation of China(51702038)the Science&Technology Department of Sichuan Province(2020YFG0061)+2 种基金the Recruitment Program for Young Professionalsthe National Key Research and Development Program of China(2017YFA0206600)the National Natural Science Foundation of China(51773045,21772030,51922032,21961160720)for financial support。
文摘Tin halide perovskites(THPs)have received extensive attention due to their low toxicity and excellent optoelectronic properties,and are considered to be the most promising alternatives to develop efficient lead-free perovskite solar cells.However,due to the unique and inherent characteristics of Sn^(2+)being easily oxidized to Sn^(4+)and fast crystallization,tin perovskite solar cells(TPSCs)show relatively poor performance and stability,compared to the lead counterparts.Recently,the introduction of bulky organic spacers into three-dimensional(3D)THPs for dimensional regulation can not only prevent the intrusion of water and oxygen,but also inhibit the self-doping effect and ion migration.In this review,we will detail how dimensional regulation enables TPSCs with high performance and superior stability.First,we summarize the intrinsic properties of THPs and analyze the root causes of their poor performance and instability.Next,we discuss the specific structure and types of the dimensional regulation strategy.Then,the mechanism of dimensional regulation is discussed in detail,mainly from inhibiting the Sn^(2+)oxidation,optimizing crystallization,passivating defects,and improving energy level alignment.Finally,future challenges and prospects for dimensional regulation are elaborated to help researchers develop more efficient and stable TPSCs.
基金supported by National Natural Science Foundation of China(No.21872080)National Key Research and Development Program of China(2022YFB3803304)+2 种基金supported by Tsinghua University Initiative Scientific Research Program(20221080065,20223080044)The State Key Laboratory of Power System and Generation Equipment(Nos.SKLD21Z03 and SKLD20M03)the Chinese Thousand Talents Program for Young Professionals.
文摘Perovskite solar cells(PSCs)have become the represent-atives of next generation of photovoltaics;nevertheless,their stability is insufficient for large scale deployment,particularly the reverse bias stability.Here,we propose a transparent conducting oxide(TCO)and low-cost metal composite electrode to improve the stability of PSCs without sacrificing the efficiency.The TCO can block ion migrations and chemical reactions between the metal and perovskite,while the metal greatly enhances the conductivity of the composite electrode.As a result,composite electrode-PSCs achieved a power conversion efficiency(PCE)of 23.7%(certified 23.2%)and exhibited excellent stability,maintaining 95%of the initial PCE when applying a reverse bias of 4.0 V for 60 s and over 92%of the initial PCE after 1000 h continuous light soaking.This composite electrode strategy can be extended to different combinations of TCOs and metals.It opens a new avenue for improving the stability of PSCs.
基金supported by National Natural Science Foundation of China(Grant No.52072327,62074052,61874159)Zhongyuan Thousand Talents(Zhongyuan Scholars)Program of Henan Province(202101510004)+6 种基金Higher Education and Teaching Reformation Project(2014SJGLX064)Academic Degrees&Graduate Education Reform Project of Henan Province(2021SJGLX060Y)Key research and development projects of Universities in Henan Province(20A140026)the Scientific Research Innovation Team of Xuchang University(2022CXTD008)Science and Technology Project of Henan Province(222102230009).L.Ding thanks the National Key Research and Development Program of China(2022YFB3803300)the open research fund of Songshan Lake Materials Laboratory(2021SLABFK02)the National Natural Science Foundation of China(21961160720).
文摘Lead-free inorganic copper-silver-bismuth-halide materials have attracted more and more attention due to their environmental friendliness,high element abundance,and low cost.Here,we developed a strategy of one-step gas-solid-phase diffusioninduced reaction to fabricate a series of bandgap-tunable Cu_(a)Agm_(1)Bim_(2)I_(n)/CuI bilayer films due to the atomic diffusion effect for the first time.By designing and regulating the sputtered Cu/Ag/Bi metal film thickness,the bandgap of Cu_(a)Agm_(1)Bim_(2)I_(n)/CuI could be reduced from 2.06 to 1.78 eV.Solar cells with the structure of FTO/TiO_(2)/Cu_(a)Agm_(1)Bim_(2)I_(n)/CuI/carbon were constructed,yielding a champion power conversion efficiency of 2.76%,which is the highest reported for this class of materials owing to the bandgap reduction and the peculiar bilayer structure.The current work provides a practical path for developing the next generation of efficient,stable,and environmentally friendly photovoltaic materials.
基金the National Key Research and Development Program of China(2018YFE0204000)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB43000000)+5 种基金the National Natural Science Foundation of China(62274155,U20A20206,51972300 and 21975245)K.Liu thanks the Youth Innovation Promotion Association(CAS)(2020114)the Beijing Nova Program(2020117)L.Ding thanks the National Key Research and Development Program of China(2022YFB3803300)the open research fund of Songshan Lake Materials Laboratory(2021SLABFK02)the National Natural Science Foundation of China(21961160720).
文摘Tandem solar cells based on metal halide perovskites are advancing rapidly during last few years[1–17].The certified power conversion efficiency(PCE)for monolithic perovskite/silicon tandem solar cell reaches 32.5%[18].Since tandem solar cells contain more layers than single-junction solar cells,stress/strain control is an issue during fabrication and further practical operation.The stress can not only affect the stability of the perovskite layer but also change the optoelectronic properties of the films[19–23].
基金supported by the National Natural Science Foundation of China(21872080)State Key Laboratory of Power System and Generation Equipment(No.SKLD21Z03,SKLD20M03)China Postdoctoral Science Foundation(No.043240004).
文摘The interfaces of perovskite solar cells(PSCs)are well known to be rich in deep-level carrier traps,which serve as non-radiative recombination centers and limit the open-circuit voltage(Voc)and power conversion efficiency(PCE)of PSCs.Defect chemistry and surface passivators have been researched extensively and mainly focused on the neutralization of uncoordinated lead or anion defects.Herein,a novel brominated passivator 2-bromophenethylammonium iodide(2-Br-PEAI)is introduced for a multi-functional passivation effect at the perovskite interface.The brominated species readily form 2D perovskite on top of the 3D perovskite and multi-interact with the 3D perovskite surface.Apart from the halide vacancy filling and anion bonding ability,the Br atoms on the benzene ring can interact with the FA cations via strong hydrogen bonding N-H…Br and interact with the[PbI_(6)]^(4−)inorganic framework.The interface defects in the PSCs are well passivated,minimizing non-radiative recombination and enhancing device performance.As a result,a champion PCE of 24.22%was achieved with high V_(oc)and fill factor.In addition,modified devices also showed enhanced operational stability(retention of>95%initial PCE after 400 h)and humidity resistance(>90%initial PCE maintained after 1500 h under~50%RH).
