Cement,phosphorous slag(PS),and steel slag(SS)were used to prepare low-carbon cementitious materials,and triisopropanolamine(TIPA)was used to improve the mechanical properties by controlling the hydration process.The ...Cement,phosphorous slag(PS),and steel slag(SS)were used to prepare low-carbon cementitious materials,and triisopropanolamine(TIPA)was used to improve the mechanical properties by controlling the hydration process.The experimental results show that,by using 0.06%TIPA,the compressive strength of cement containing 60%PS or 60%SS could be enhanced by 12%or 18%at 28 d.The presence of TIPA significantly affected the hydration process of PS and SS in cement.In the early stage,TIPA accelerated the dissolution of Al in PS,and the formation of carboaluminate hydrate was facilitated,which could induce the hydration;TIPA promoted the dissolution of Fe in SS,and the formation of Fe-monocarbonate,which was precipitated on the surface of SS,resulting in the postponement of hydration,especially for the high SS content.In the later stage,under the continuous solubilization effect of TIPA,the hydration of PS and SS could refine the pore structure.It was noted that compared with portland cement,the carbon emissions of cement-PS-TIPA and cement-SS-TIPA was reduced by 52%and 49%,respectively.展开更多
We investigated the effects of ferro-vanadium slag(FVS)as a supplemental cementing material which can dissolve a large amount of active aluminum phases without excessive pretreatment or excitation to enhance the inner...We investigated the effects of ferro-vanadium slag(FVS)as a supplemental cementing material which can dissolve a large amount of active aluminum phases without excessive pretreatment or excitation to enhance the inner chloride solidified rate(CSR)of cement-based materials.Cement-FVS pastes with 0-30%content of FVS was designed,and the CSR was examined.Hydrates at different curing ages were studied by X-ray diffraction(XRD)and thermo-gravimetric analysis(TGA);hydration heat and^(29)Si nuclear magnetic resonance(^(29)Si-NMR)were tested to analyze the hydration degree of the system;mechanical properties in cement-FVS system were evaluated by compressive strength test,pore structure and the fractal regression.Results revealed that the incorporation of FVS could greatly promote the CSR of cement-FVS system.Compared with the control groups,30%dosage of FVS could increase the CSR by 69%at 3 d,47%at 7d,36%at 28 d and 34%at 60 d.It was demonstrated that the incorporation of FVS could enhance the chemical solidifying ability of chloride,and the main reason was the promoted generation of Kuzel’s salt and the Friedel’s salt in hydrate products,and the enhanced chloride migration resistance capacity by increasing the volume of gel pores in the cement-FVS system.Considering the influence of FVS on strength performance,this paper suggested that the suitable dosage of FVS as a supplemental cementing material was around 10%.The study in this paper might provide one efficient path to promote the chloride solidifying capacity of cement-based material and meanwhile the comprehensive utilization of FVS.展开更多
We investigated the effects of different barium compounds on the thaumasite form of sulphate attack(TSA)resistance of cement-based materials when they were used as admixtures in mortars.Moreover,we analyzed the inhibi...We investigated the effects of different barium compounds on the thaumasite form of sulphate attack(TSA)resistance of cement-based materials when they were used as admixtures in mortars.Moreover,we analyzed the inhibition mechanisms within different types of barium salts,namely BaCO_3 and Ba(OH)_2,on the thaumasite formation.The controlcement mortar and mortars with barium salts to cement and limestone weight ratios of 0.5%,1.0%,and 1.5% were immersed in 5%(by weight)MgSO_4 solution at 5 ℃ to mimic TSA.Appearance,mass,and compressive strength of the mortar samples were monitored and measured to assess the generaldegradation extent of these samples.The products of sulphate attack were further analyzed by XRD,FTIR,and SEM,respectively.Experimentalresults show that different degradation extent is evident in allmortars cured in MgSO_4 solution.However,barium salts can greatly inhibit such degradation.Barium in hydroxide form has better effectiveness in protection against TSA than carbonate form,which may be due to their solubility difference in alkaline cement pore solution,and the presence of these barium compounds can reduce the degree of TSA by comparison with the almost completely decomposed controlsamples.展开更多
The ranking problem is studied when the pairwise comparisons values are uncertain in the analytic hierarchy process (AHP). The method of constructing the judgment matrix is presented when the pairwise comparisons valu...The ranking problem is studied when the pairwise comparisons values are uncertain in the analytic hierarchy process (AHP). The method of constructing the judgment matrix is presented when the pairwise comparisons values are denoted by the unascertained three-valued reciprocal scales. By turning the reciprocal judgment matrix into attribute judgment matrix, the method to check the consistency of the pairwise comparisons judgment matrix and the calculation method of weighting coefficients are given. Finally, numerical examples are given to illustrate the effectiveness of the proposed method.展开更多
Thaumasite form of sulfate attack(TSA) can be observed in cement containing limestone under sulfate condition at low temperature. Mixing with suitable mineral admixture could be a good choice to improve the TSA resist...Thaumasite form of sulfate attack(TSA) can be observed in cement containing limestone under sulfate condition at low temperature. Mixing with suitable mineral admixture could be a good choice to improve the TSA resistance performance of cement-based materials. We investigated the durability performance of limestone-cement mortars reinforced with silica fume(SF) in 5% MgSO_4 solution at 5 ℃. The mortars, which were immersed in aggressive condition, were prepared with 2%, 4%, 6%, 8%, and 10% cement replacement by SF at a fixed water-to-binder ratio. Appearance, compressive strength, change of length and mass and corrosion products were investigated to evaluate the TSA resistance performance of SF based specimens. The results showed that specimens in the absence of SF almost disintegrated. Increasing SF dosage can reduce the degree of deterioration of SF mortars in TSA environment. Mortar mixtures with more than 6% SF merely show slight degeneration in relation to macroscopic and microscopic tests and characterizations.展开更多
In order to improve the thermal storage capacity of expanded vermiculite(EV) based formstable composite PCM(FS-PCM) via organic modification of EV, first, EV was modified with a sodium stearate(Na St) as surface modif...In order to improve the thermal storage capacity of expanded vermiculite(EV) based formstable composite PCM(FS-PCM) via organic modification of EV, first, EV was modified with a sodium stearate(Na St) as surface modifier, and organic EV(OEV) with hydrophobicity and higher adsorption capacity for fatty acid was obtained. A novel capric-stearic acid eutectic(CA-SA)/OEV FS-PCM with high thermal storage capacity was then developed. OEV and CA-SA/OEV were characterized by scanning electron microscopy(SEM), X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), differential scanning calorimetry(DSC), thermal gravimetry(TG), and thermal cycling test. Results showed that OEV has obvious hydrophobicity and a higher adsorption capacity for fatty acid. Its adsorption ratio has increased by 48.71% compared with that of EV. CA-SA/OEV possesses high thermal storage density(112.52 J/g), suitable melting temperature(20.49 ℃), good chemical compatibility, excellent thermal stability and reliability, indicating great application potential for building energy efficiency. Moreover, organic modification of inorganic matrix may offer novel options for improving its adsorption capacity for organic PCMs and increasing heat storage capacity of corresponding FS-PCMs.展开更多
The aim of the present study was to investigate the influence of heavy metals on the polymorph transformation of tricalcium silicate.Heavy metal(0.1wt% to 3.0wt%) of Cr,Zn,Cu,Ni and Pb(in oxides form) was added into t...The aim of the present study was to investigate the influence of heavy metals on the polymorph transformation of tricalcium silicate.Heavy metal(0.1wt% to 3.0wt%) of Cr,Zn,Cu,Ni and Pb(in oxides form) was added into the raw mixtures and then sintered together three times at 1450 ℃ for 2 h.The f-CaO content of doped C_3S was determined by the glycerol-ethanol method,and their polymorph transformation was investigated by means of XRD and FTIR.Thermal analysis(DTA/DTG) was conducted to determine the reaction temperatures and mass losses during the sintering process of raw mixtures.The concentration of heavy metal in C_3S after sintering was determined by ICP-AES.The experimental results indicate that heavy metal doping contributes to a higher symmetry of C_3S except for Pb.Addition of up to 3.0wt%,Cr will lead to a decomposition of C_3S into C_2S and CaO;Zn will cause a transformation from T1 to M2 polymorph,and then to R polymorph;Cu and Ni cause a gradual transformation from T1 to T2 and then to M1 and/or M2 polymorph.During the sintering process,all the Pb releases into atmosphere because of evaporation.展开更多
基金Funded by the Key Public Welfare Special Project of Henan Province(No.201300311000)the Major Technical Innovation Project in Hubei Province of China(No.2020BED025)。
文摘Cement,phosphorous slag(PS),and steel slag(SS)were used to prepare low-carbon cementitious materials,and triisopropanolamine(TIPA)was used to improve the mechanical properties by controlling the hydration process.The experimental results show that,by using 0.06%TIPA,the compressive strength of cement containing 60%PS or 60%SS could be enhanced by 12%or 18%at 28 d.The presence of TIPA significantly affected the hydration process of PS and SS in cement.In the early stage,TIPA accelerated the dissolution of Al in PS,and the formation of carboaluminate hydrate was facilitated,which could induce the hydration;TIPA promoted the dissolution of Fe in SS,and the formation of Fe-monocarbonate,which was precipitated on the surface of SS,resulting in the postponement of hydration,especially for the high SS content.In the later stage,under the continuous solubilization effect of TIPA,the hydration of PS and SS could refine the pore structure.It was noted that compared with portland cement,the carbon emissions of cement-PS-TIPA and cement-SS-TIPA was reduced by 52%and 49%,respectively.
基金National Key Research and Development Program of China(No.2019YFC1907101-03)Major Technical Innovation Project in Hubei Province of China(Nos.2021BAA060,2020BCA077)。
文摘We investigated the effects of ferro-vanadium slag(FVS)as a supplemental cementing material which can dissolve a large amount of active aluminum phases without excessive pretreatment or excitation to enhance the inner chloride solidified rate(CSR)of cement-based materials.Cement-FVS pastes with 0-30%content of FVS was designed,and the CSR was examined.Hydrates at different curing ages were studied by X-ray diffraction(XRD)and thermo-gravimetric analysis(TGA);hydration heat and^(29)Si nuclear magnetic resonance(^(29)Si-NMR)were tested to analyze the hydration degree of the system;mechanical properties in cement-FVS system were evaluated by compressive strength test,pore structure and the fractal regression.Results revealed that the incorporation of FVS could greatly promote the CSR of cement-FVS system.Compared with the control groups,30%dosage of FVS could increase the CSR by 69%at 3 d,47%at 7d,36%at 28 d and 34%at 60 d.It was demonstrated that the incorporation of FVS could enhance the chemical solidifying ability of chloride,and the main reason was the promoted generation of Kuzel’s salt and the Friedel’s salt in hydrate products,and the enhanced chloride migration resistance capacity by increasing the volume of gel pores in the cement-FVS system.Considering the influence of FVS on strength performance,this paper suggested that the suitable dosage of FVS as a supplemental cementing material was around 10%.The study in this paper might provide one efficient path to promote the chloride solidifying capacity of cement-based material and meanwhile the comprehensive utilization of FVS.
基金Funded by the National Natural Science Foundation of China(No.51372076)the Project of Science&Technology Department of Hubei Province(No.2014BCB027)
文摘We investigated the effects of different barium compounds on the thaumasite form of sulphate attack(TSA)resistance of cement-based materials when they were used as admixtures in mortars.Moreover,we analyzed the inhibition mechanisms within different types of barium salts,namely BaCO_3 and Ba(OH)_2,on the thaumasite formation.The controlcement mortar and mortars with barium salts to cement and limestone weight ratios of 0.5%,1.0%,and 1.5% were immersed in 5%(by weight)MgSO_4 solution at 5 ℃ to mimic TSA.Appearance,mass,and compressive strength of the mortar samples were monitored and measured to assess the generaldegradation extent of these samples.The products of sulphate attack were further analyzed by XRD,FTIR,and SEM,respectively.Experimentalresults show that different degradation extent is evident in allmortars cured in MgSO_4 solution.However,barium salts can greatly inhibit such degradation.Barium in hydroxide form has better effectiveness in protection against TSA than carbonate form,which may be due to their solubility difference in alkaline cement pore solution,and the presence of these barium compounds can reduce the degree of TSA by comparison with the almost completely decomposed controlsamples.
文摘The ranking problem is studied when the pairwise comparisons values are uncertain in the analytic hierarchy process (AHP). The method of constructing the judgment matrix is presented when the pairwise comparisons values are denoted by the unascertained three-valued reciprocal scales. By turning the reciprocal judgment matrix into attribute judgment matrix, the method to check the consistency of the pairwise comparisons judgment matrix and the calculation method of weighting coefficients are given. Finally, numerical examples are given to illustrate the effectiveness of the proposed method.
基金Funded by Hubei Provincial Natural Science Foundation of China(No.2016CFB353)the Science and Technology Support Program of Hubei Province(No.2015BCA244)National Natural Science Foundation of China(No.51372076)
文摘Thaumasite form of sulfate attack(TSA) can be observed in cement containing limestone under sulfate condition at low temperature. Mixing with suitable mineral admixture could be a good choice to improve the TSA resistance performance of cement-based materials. We investigated the durability performance of limestone-cement mortars reinforced with silica fume(SF) in 5% MgSO_4 solution at 5 ℃. The mortars, which were immersed in aggressive condition, were prepared with 2%, 4%, 6%, 8%, and 10% cement replacement by SF at a fixed water-to-binder ratio. Appearance, compressive strength, change of length and mass and corrosion products were investigated to evaluate the TSA resistance performance of SF based specimens. The results showed that specimens in the absence of SF almost disintegrated. Increasing SF dosage can reduce the degree of deterioration of SF mortars in TSA environment. Mortar mixtures with more than 6% SF merely show slight degeneration in relation to macroscopic and microscopic tests and characterizations.
基金Funded by the Major State Research Development Program of China during the 13th Five-Year Plan Period(No.2016YFC0700904)the Science and Technology Support Program of Hubei Province(Nos.2014BAA134 and 2015BAA107)
文摘In order to improve the thermal storage capacity of expanded vermiculite(EV) based formstable composite PCM(FS-PCM) via organic modification of EV, first, EV was modified with a sodium stearate(Na St) as surface modifier, and organic EV(OEV) with hydrophobicity and higher adsorption capacity for fatty acid was obtained. A novel capric-stearic acid eutectic(CA-SA)/OEV FS-PCM with high thermal storage capacity was then developed. OEV and CA-SA/OEV were characterized by scanning electron microscopy(SEM), X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), differential scanning calorimetry(DSC), thermal gravimetry(TG), and thermal cycling test. Results showed that OEV has obvious hydrophobicity and a higher adsorption capacity for fatty acid. Its adsorption ratio has increased by 48.71% compared with that of EV. CA-SA/OEV possesses high thermal storage density(112.52 J/g), suitable melting temperature(20.49 ℃), good chemical compatibility, excellent thermal stability and reliability, indicating great application potential for building energy efficiency. Moreover, organic modification of inorganic matrix may offer novel options for improving its adsorption capacity for organic PCMs and increasing heat storage capacity of corresponding FS-PCMs.
基金Funded by the National Natural Science Foundation of China(51002110)the Fundamental Research Funds for the Central Universities(2012-IV-025)the State Scholarship Program of China Scholarship Council
文摘The aim of the present study was to investigate the influence of heavy metals on the polymorph transformation of tricalcium silicate.Heavy metal(0.1wt% to 3.0wt%) of Cr,Zn,Cu,Ni and Pb(in oxides form) was added into the raw mixtures and then sintered together three times at 1450 ℃ for 2 h.The f-CaO content of doped C_3S was determined by the glycerol-ethanol method,and their polymorph transformation was investigated by means of XRD and FTIR.Thermal analysis(DTA/DTG) was conducted to determine the reaction temperatures and mass losses during the sintering process of raw mixtures.The concentration of heavy metal in C_3S after sintering was determined by ICP-AES.The experimental results indicate that heavy metal doping contributes to a higher symmetry of C_3S except for Pb.Addition of up to 3.0wt%,Cr will lead to a decomposition of C_3S into C_2S and CaO;Zn will cause a transformation from T1 to M2 polymorph,and then to R polymorph;Cu and Ni cause a gradual transformation from T1 to T2 and then to M1 and/or M2 polymorph.During the sintering process,all the Pb releases into atmosphere because of evaporation.
