The Bering Sea shelf and Chukchi Sea shelf are believed to hold enormous oil and gas reserves which have attracted a lot of geophysical surveys. For the interpretation of acoustic geophysical survey results, sediment ...The Bering Sea shelf and Chukchi Sea shelf are believed to hold enormous oil and gas reserves which have attracted a lot of geophysical surveys. For the interpretation of acoustic geophysical survey results, sediment sound velocity is one of the main parameters. On seven sediment cores collected from the Bering Sea and Chukchi Sea during the 5th Chinese National Arctic Research Expedition, sound velocity measurements were made at 35, 50, 100, 135, 150, 174, 200, and 250 kHz using eight separate pairs of ultrasonic transducers. The measured sound velocities range from 1 425.1 m/s to 1 606.4 m/s and are dispersive with the degrees of dispersion from 2.2% to 4.0% over a frequency range of 35-250 kHz. After the sound velocity measurements, the measurements of selected geotechnical properties and the Scanning Electron Microscopic observation of microstructure were also made on the sediment cores. The results show that the seafioor sediments are composed of silty sand, sandy silt, coarse silt, clayey silt, sand-silt-clay and silty clay. Aggregate and diatom debris is found in the seafloor sediments. Through comparative analysis of microphotographs and geotechnical properties, it is assumed that the large pore spaces between aggregates and the intraparticulate porosity of diatom debris increase the porosity of the seafioor sediments, and affect other geotechnical properties. The correlation analysis of sound velocity and geotechnical properties shows that the correlation of sound velocity with porosity and wet bulk density is extreme significant, while the correlation of sound velocity with clay content, mean grain size and organic content is not significant. The regression equations between porosity, wet bulk density and sound velocity based on best-fit polynomial are given.展开更多
To accurately characterize the shear wave speed dispersion of seafloor sediments in the northern South China Sea,five types of sediments including silty clay,clayey silt,sandy silt,silty sand,and clayey sand were sele...To accurately characterize the shear wave speed dispersion of seafloor sediments in the northern South China Sea,five types of sediments including silty clay,clayey silt,sandy silt,silty sand,and clayey sand were selected,on which the measurements of the shear wave speed at 0.5-2.0 kHz and related physical properties were performed.Results reveal that the shear wave speed of sediments increases as the frequency increases,and the dispersion enhanced in the sediments in the order of silty clay,clayey silt,sandy silt,silty sand,and clayey sand,at a linear change rate of 0.727,0.787,3.32,4.893,and 6.967 m s−1 kHz−1,respectively.Through regression analysis,linear and logarithmic regression equations for the correlation between shear wave speed and frequency were established for each sediment type and the determination coefficients of regression equations indicate that the correlation is closer to a logarithmic relationship.The Grain-Shearing(GS)and Biot-Stoll models were used to calculate the shear wave speed dispersion of the five sediment types,and the comparison between theoretical prediction and measured results of shear wave speeds shows that the GS model can more accurately describe the shear wave speed dispersion characteristics of these sediments in the frequency band of 0.5-2.0 kHz.In the same band,the predictions obtained by using the Biot-Stoll model are significantly different from the measured data.展开更多
We measured in the laboratory compressional wave velocity and electrical resistivity on 434 sediment samples collected from the Yellow Sea to study the joint elastic-electrical properties of marine sediments. Porosity...We measured in the laboratory compressional wave velocity and electrical resistivity on 434 sediment samples collected from the Yellow Sea to study the joint elastic-electrical properties of marine sediments. Porosity was found to reduce both elastic velocity and electrical resistivity of the marine sediments in a non-linear fashion; velocity showed an approximate linear increase with increasing logarithm of resistivity. Various effective medium models either implemented or developed were compared with the new dataset. The model results showed that the combined self-consistent approximation and differential effective medium model using critical porosity of 0.6 and 0.5 for velocity and resistivity respectively gave a reasonable description of the joint elastic-electrical behaviors of the marine sediments. The joint elastic-electrical properties of the marine sediments established would be used to estimate resistivity from measured velocity and vice versa, and could also be suitable for detection of gas hydrate or other suitable targets from joint seismic-resistivity surveys.展开更多
基金The Polar Environment Comprehensive Investigation and Assessment Programs of China under contract Nos CHINARE2013-03-03-02,CHINARE2014-03-03-02 and CHINARE2014-04-03-04-02the Fundamental Research Funds for First Institute of Oceanography,State Oceanic Administration of China under contract No.GY0213G05
文摘The Bering Sea shelf and Chukchi Sea shelf are believed to hold enormous oil and gas reserves which have attracted a lot of geophysical surveys. For the interpretation of acoustic geophysical survey results, sediment sound velocity is one of the main parameters. On seven sediment cores collected from the Bering Sea and Chukchi Sea during the 5th Chinese National Arctic Research Expedition, sound velocity measurements were made at 35, 50, 100, 135, 150, 174, 200, and 250 kHz using eight separate pairs of ultrasonic transducers. The measured sound velocities range from 1 425.1 m/s to 1 606.4 m/s and are dispersive with the degrees of dispersion from 2.2% to 4.0% over a frequency range of 35-250 kHz. After the sound velocity measurements, the measurements of selected geotechnical properties and the Scanning Electron Microscopic observation of microstructure were also made on the sediment cores. The results show that the seafioor sediments are composed of silty sand, sandy silt, coarse silt, clayey silt, sand-silt-clay and silty clay. Aggregate and diatom debris is found in the seafloor sediments. Through comparative analysis of microphotographs and geotechnical properties, it is assumed that the large pore spaces between aggregates and the intraparticulate porosity of diatom debris increase the porosity of the seafioor sediments, and affect other geotechnical properties. The correlation analysis of sound velocity and geotechnical properties shows that the correlation of sound velocity with porosity and wet bulk density is extreme significant, while the correlation of sound velocity with clay content, mean grain size and organic content is not significant. The regression equations between porosity, wet bulk density and sound velocity based on best-fit polynomial are given.
基金supported by the Basic Scientific Fund for National Public Research Institutes of China(No.GY0220Q09)the National Natural Science Foundation of China(Nos.41676055,41527809,42176191,and 41330965)+1 种基金the Opening Fund of Qingdao National Laboratory for Marine Science and Technology(No.QNLM2016ORP0209)the Taishan Scholar Pro-ject Funding(No.tspd20161007).
文摘To accurately characterize the shear wave speed dispersion of seafloor sediments in the northern South China Sea,five types of sediments including silty clay,clayey silt,sandy silt,silty sand,and clayey sand were selected,on which the measurements of the shear wave speed at 0.5-2.0 kHz and related physical properties were performed.Results reveal that the shear wave speed of sediments increases as the frequency increases,and the dispersion enhanced in the sediments in the order of silty clay,clayey silt,sandy silt,silty sand,and clayey sand,at a linear change rate of 0.727,0.787,3.32,4.893,and 6.967 m s−1 kHz−1,respectively.Through regression analysis,linear and logarithmic regression equations for the correlation between shear wave speed and frequency were established for each sediment type and the determination coefficients of regression equations indicate that the correlation is closer to a logarithmic relationship.The Grain-Shearing(GS)and Biot-Stoll models were used to calculate the shear wave speed dispersion of the five sediment types,and the comparison between theoretical prediction and measured results of shear wave speeds shows that the GS model can more accurately describe the shear wave speed dispersion characteristics of these sediments in the frequency band of 0.5-2.0 kHz.In the same band,the predictions obtained by using the Biot-Stoll model are significantly different from the measured data.
基金supported by the Oceanic Special Public Sector Research Project (Grant No. 200805008)
文摘We measured in the laboratory compressional wave velocity and electrical resistivity on 434 sediment samples collected from the Yellow Sea to study the joint elastic-electrical properties of marine sediments. Porosity was found to reduce both elastic velocity and electrical resistivity of the marine sediments in a non-linear fashion; velocity showed an approximate linear increase with increasing logarithm of resistivity. Various effective medium models either implemented or developed were compared with the new dataset. The model results showed that the combined self-consistent approximation and differential effective medium model using critical porosity of 0.6 and 0.5 for velocity and resistivity respectively gave a reasonable description of the joint elastic-electrical behaviors of the marine sediments. The joint elastic-electrical properties of the marine sediments established would be used to estimate resistivity from measured velocity and vice versa, and could also be suitable for detection of gas hydrate or other suitable targets from joint seismic-resistivity surveys.
