A series of x （Fe,Ni）/Al2O3 catalysts （x = 2-12 wt%） were prepared using incipient wetness method and studied for the conversion of synthesis gas to light olefins.6 wt%（Fe,Ni）/Al2O3 catalyst was found to be the ...A series of x （Fe,Ni）/Al2O3 catalysts （x = 2-12 wt%） were prepared using incipient wetness method and studied for the conversion of synthesis gas to light olefins.6 wt%（Fe,Ni）/Al2O3 catalyst was found to be the optimal catalyst for the production of C2-C4 olefins.The effects of calcination behaviors and operational conditions on the catalytic performance of the optimal catalyst were investigated.The best operational conditions were molar feed ratio H2/CO = 2/1,T = 260 ℃,gas hourly space velocity （GHSV） = 2600 h^-1 and the pressure of 3 bar.Character-izations of both precursors and catalysts were carried out using X-ray diffraction （XRD）,temperature-programmed reduction （TPR）,scanning electron microscopy （SEM）,N2-adsorption-desorption measurement,thermal gravimetric analysis （TGA） and differential scanning calorimetry （DSC）.展开更多
Cobalt-manganese nano catalysts were prepared by sol-gel method. This research investigated the effects of different cobalt-manganese （Co/Mn = 1/1） loading, pH and calcination conditions on the catalytic performance...Cobalt-manganese nano catalysts were prepared by sol-gel method. This research investigated the effects of different cobalt-manganese （Co/Mn = 1/1） loading, pH and calcination conditions on the catalytic performance of Co-Mn/TiO2 catalysts for Fischer-Tropsch synthesis （FTS） in a fixed bed reactor. It was found that the catalyst containing 30wt%（Co-Mn）/TiO2 was an optimal catalyst for the conversion of synthesis gas to light olefins especially propylene. The activity and selectivity of optimal catalyst were studied under different operational conditions. The results showed that the best operational conditions were H2/CO = 1/1 molar feed ratio at 250 ℃ and GHSV = 1300 h-1 un- der atmospheric pressure. Characterization of catalysts was carried out by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, N2 adsorption-desorlation measurements.展开更多
Iron nickel oxide catalysts were prepared using co-precipitation procedure and studied for the conversion of synthesis gas to light olefins.In particular,the effects of a range of preparation variables such as Fe/Ni m...Iron nickel oxide catalysts were prepared using co-precipitation procedure and studied for the conversion of synthesis gas to light olefins.In particular,the effects of a range of preparation variables such as Fe/Ni molar ratios of the precipitation solution,precipitate aging times,calcination conditions,different supports and loading of optimum support on the structure of catalysts and their catalytic performance for the tested reaction were investigated.It was found that the catalyst containing 40%Fe/60%Ni/40wt%Al 2O3 ,which was aged for 180 min and calcined at 600 ℃ for 6 h was the optimum modified catalyst.The catalytic performance of optimal catalyst has been studied in different operation conditions such as reaction temperatures,H2 /CO molar feed ratios and reaction total pressure.Characterization of both precursors and calcined catalysts was carried out by powder X-ray diffraction（XRD）,scanning electron microscopy（SEM）,Brunauer-Emmett-Teller（BET） surface area measurements,thermal analysis methods such as thermal gravimetric analysis（TGA） and differential scanning calorimetry（DSC）.展开更多
The 15%(Co-Mn)/TiO2,(Co/Mn=1/6) catalyst was prepared using fusion procedure and studied for the conversion of synthesis gas to C2 ～ 4 olefins.The effects of calcination conditions and operation conditions such as th...The 15%(Co-Mn)/TiO2,(Co/Mn=1/6) catalyst was prepared using fusion procedure and studied for the conversion of synthesis gas to C2 ～ 4 olefins.The effects of calcination conditions and operation conditions such as the H 2 / CO molar feed ratio at different temperatures,gas hourly space velocity(GHSV) and total reaction pressure on the catalytic performance of catalyst were investigated.The stability of the catalyst during 150 h at optimal operation conditions(t = 250℃ H2 /CO= 2/1,GHSV=1 500 h-1 and p =0.3 MPa) has been investigated.It is found that this catalyst is high stable for production C2 ～ 4 olefins.Characterizations of both precursors and calcined catalysts by powder X-ray diffraction,scanning electron microscopy(SEM),Brunauer-Emmett-Teller(BET) specific surface area measurement and thermal analysis methods such as thermal gravimetric analysis(TGA) and differential scanning calorimetry(DSC) show that the different preparation method influences the catalyst precursor structure and morphology.展开更多
Nanosized Fe-Co catalysts were prepared by co-precipitation method and studied for the conversion of synthesis gas to light olefins.In particular,the effects of a range of preparation variables such as Co/Fe molar rat...Nanosized Fe-Co catalysts were prepared by co-precipitation method and studied for the conversion of synthesis gas to light olefins.In particular,the effects of a range of preparation variables such as Co/Fe molar ratios of the precipitation solution,pH value of precipitate,temperature of precipitation,promoters and loading of optimum promoter on the structure and catalytic performance are investigated.The optimal nano catalyst for light olefins （C2-C4） production was obtained over the catalyst with Co/Fe molar ratio of 3/1 which promoted with 2 wt% K.The results show that the best operational conditions were GHSV=2200 h^-1 （H2/CO=2/1） at 260℃ under atmospheric pressure.Characterization of catalysts were carried out using X-ray diffraction （XRD）,thermal gravimetric analysis （TGA）,differential scanning calorimetry （DSC）,scanning electron microscopy （SEM）,transmission electron microscopy （TEM） and N2 physisorption measurements such as Brunauer-Emmett-Teller （BET） and Barrett-Joyner-Halenda （BJH） methods.展开更多
文摘A series of x （Fe,Ni）/Al2O3 catalysts （x = 2-12 wt%） were prepared using incipient wetness method and studied for the conversion of synthesis gas to light olefins.6 wt%（Fe,Ni）/Al2O3 catalyst was found to be the optimal catalyst for the production of C2-C4 olefins.The effects of calcination behaviors and operational conditions on the catalytic performance of the optimal catalyst were investigated.The best operational conditions were molar feed ratio H2/CO = 2/1,T = 260 ℃,gas hourly space velocity （GHSV） = 2600 h^-1 and the pressure of 3 bar.Character-izations of both precursors and catalysts were carried out using X-ray diffraction （XRD）,temperature-programmed reduction （TPR）,scanning electron microscopy （SEM）,N2-adsorption-desorption measurement,thermal gravimetric analysis （TGA） and differential scanning calorimetry （DSC）.
基金supported by the International Center for Science, High Technology & Environmental Sciences
文摘Cobalt-manganese nano catalysts were prepared by sol-gel method. This research investigated the effects of different cobalt-manganese （Co/Mn = 1/1） loading, pH and calcination conditions on the catalytic performance of Co-Mn/TiO2 catalysts for Fischer-Tropsch synthesis （FTS） in a fixed bed reactor. It was found that the catalyst containing 30wt%（Co-Mn）/TiO2 was an optimal catalyst for the conversion of synthesis gas to light olefins especially propylene. The activity and selectivity of optimal catalyst were studied under different operational conditions. The results showed that the best operational conditions were H2/CO = 1/1 molar feed ratio at 250 ℃ and GHSV = 1300 h-1 un- der atmospheric pressure. Characterization of catalysts was carried out by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, N2 adsorption-desorlation measurements.
文摘Iron nickel oxide catalysts were prepared using co-precipitation procedure and studied for the conversion of synthesis gas to light olefins.In particular,the effects of a range of preparation variables such as Fe/Ni molar ratios of the precipitation solution,precipitate aging times,calcination conditions,different supports and loading of optimum support on the structure of catalysts and their catalytic performance for the tested reaction were investigated.It was found that the catalyst containing 40%Fe/60%Ni/40wt%Al 2O3 ,which was aged for 180 min and calcined at 600 ℃ for 6 h was the optimum modified catalyst.The catalytic performance of optimal catalyst has been studied in different operation conditions such as reaction temperatures,H2 /CO molar feed ratios and reaction total pressure.Characterization of both precursors and calcined catalysts was carried out by powder X-ray diffraction（XRD）,scanning electron microscopy（SEM）,Brunauer-Emmett-Teller（BET） surface area measurements,thermal analysis methods such as thermal gravimetric analysis（TGA） and differential scanning calorimetry（DSC）.
文摘The 15%(Co-Mn)/TiO2,(Co/Mn=1/6) catalyst was prepared using fusion procedure and studied for the conversion of synthesis gas to C2 ～ 4 olefins.The effects of calcination conditions and operation conditions such as the H 2 / CO molar feed ratio at different temperatures,gas hourly space velocity(GHSV) and total reaction pressure on the catalytic performance of catalyst were investigated.The stability of the catalyst during 150 h at optimal operation conditions(t = 250℃ H2 /CO= 2/1,GHSV=1 500 h-1 and p =0.3 MPa) has been investigated.It is found that this catalyst is high stable for production C2 ～ 4 olefins.Characterizations of both precursors and calcined catalysts by powder X-ray diffraction,scanning electron microscopy(SEM),Brunauer-Emmett-Teller(BET) specific surface area measurement and thermal analysis methods such as thermal gravimetric analysis(TGA) and differential scanning calorimetry(DSC) show that the different preparation method influences the catalyst precursor structure and morphology.
基金supported by the International Center for Science,High Technology & Environmental Sciences
文摘Nanosized Fe-Co catalysts were prepared by co-precipitation method and studied for the conversion of synthesis gas to light olefins.In particular,the effects of a range of preparation variables such as Co/Fe molar ratios of the precipitation solution,pH value of precipitate,temperature of precipitation,promoters and loading of optimum promoter on the structure and catalytic performance are investigated.The optimal nano catalyst for light olefins （C2-C4） production was obtained over the catalyst with Co/Fe molar ratio of 3/1 which promoted with 2 wt% K.The results show that the best operational conditions were GHSV=2200 h^-1 （H2/CO=2/1） at 260℃ under atmospheric pressure.Characterization of catalysts were carried out using X-ray diffraction （XRD）,thermal gravimetric analysis （TGA）,differential scanning calorimetry （DSC）,scanning electron microscopy （SEM）,transmission electron microscopy （TEM） and N2 physisorption measurements such as Brunauer-Emmett-Teller （BET） and Barrett-Joyner-Halenda （BJH） methods.
