In this paper,a simple adaptive power dividing function for the design of a dual-input Doherty power amplifier(DPA)is presented.In the presented approaches,the signal separation function(SSF)at different frequency poi...In this paper,a simple adaptive power dividing function for the design of a dual-input Doherty power amplifier(DPA)is presented.In the presented approaches,the signal separation function(SSF)at different frequency points can be characterized by a polynomial.And in the practical test,the coefficients of SSF can be determined by measuring a small number of data points of input power.Same as other dualinput DPAs,the proposed approach can also achieve high output power and back-off efficiency in a broadband operation band by adjusting the power distribution ratio flexibly.Finally,a 1.5-2.5 GHz highefficiency dual-input Doherty power amplifier is implemented according to this approach.The test results show that the peak power is 48.6-49.7d Bm,and the 6-d B back-off efficiency is 51.0-67.0%,and the saturation efficiency is 52.4-74.6%.The digital predistortion correction is carried out at the frequency points of 1.8/2.1GHz,and the adjacent channel power ratio is lower than-54.5d Bc.Simulation and experiment results can verify the effectiveness and correctness of the proposed method.展开更多
The basic theory of the sequential load-modulated balanced amplifier(SLMBA)is introduced and the working principle of its active load modulation is analyzed in this paper.In order to further improve the performance of...The basic theory of the sequential load-modulated balanced amplifier(SLMBA)is introduced and the working principle of its active load modulation is analyzed in this paper.In order to further improve the performance of the SLMBA,a codesigned method of the coupler and power amplifier(PA)is proposed,which is different from the traditional design of couplers.According to the back-off point and saturation point of the SLMBA,this coupler-PA codesign approach can make the working state of the coupler and three-way PA closer to the actual situation,which improves the overall performance of the SLMBA.The maximum output power ratio of the control PA and the balance PA is then determined by the preset output power back-off(OBO)of 10 dB,and the phase compensation line is determined by the trace of the load modulation impedance of the balanced PA.In order to verify the proposed method,an SLMBA operating at 1.5–2.7 GHz(57%relative bandwidth)is designed.The layout simulation results show that its saturated output powers achieve 40.7–43.7 dBm and the small signal gains are 9.7–12.4 dB.Besides,the drain efficiencies at the saturated point and 10 dB OBO point are 52.7%–73.7%and 44.9%–59.2%respectively.展开更多
基金supported by National Natural Science Foundation of China(No.62001061)。
文摘In this paper,a simple adaptive power dividing function for the design of a dual-input Doherty power amplifier(DPA)is presented.In the presented approaches,the signal separation function(SSF)at different frequency points can be characterized by a polynomial.And in the practical test,the coefficients of SSF can be determined by measuring a small number of data points of input power.Same as other dualinput DPAs,the proposed approach can also achieve high output power and back-off efficiency in a broadband operation band by adjusting the power distribution ratio flexibly.Finally,a 1.5-2.5 GHz highefficiency dual-input Doherty power amplifier is implemented according to this approach.The test results show that the peak power is 48.6-49.7d Bm,and the 6-d B back-off efficiency is 51.0-67.0%,and the saturation efficiency is 52.4-74.6%.The digital predistortion correction is carried out at the frequency points of 1.8/2.1GHz,and the adjacent channel power ratio is lower than-54.5d Bc.Simulation and experiment results can verify the effectiveness and correctness of the proposed method.
基金supported in part by the National Natural Science Foundation of China under Grant Nos. 62001061, 62171068 and 62171065ZTE Industry-University-Institute Cooperation Funds under Grant No. HC-CN-20210520005
文摘The basic theory of the sequential load-modulated balanced amplifier(SLMBA)is introduced and the working principle of its active load modulation is analyzed in this paper.In order to further improve the performance of the SLMBA,a codesigned method of the coupler and power amplifier(PA)is proposed,which is different from the traditional design of couplers.According to the back-off point and saturation point of the SLMBA,this coupler-PA codesign approach can make the working state of the coupler and three-way PA closer to the actual situation,which improves the overall performance of the SLMBA.The maximum output power ratio of the control PA and the balance PA is then determined by the preset output power back-off(OBO)of 10 dB,and the phase compensation line is determined by the trace of the load modulation impedance of the balanced PA.In order to verify the proposed method,an SLMBA operating at 1.5–2.7 GHz(57%relative bandwidth)is designed.The layout simulation results show that its saturated output powers achieve 40.7–43.7 dBm and the small signal gains are 9.7–12.4 dB.Besides,the drain efficiencies at the saturated point and 10 dB OBO point are 52.7%–73.7%and 44.9%–59.2%respectively.
