Reclamation of used moulding and core sands has been defined as a treatment of waste moulding refractory materials, enabling a recovery of at least one of the components having properties similar to those of the fresh...Reclamation of used moulding and core sands has been defined as a treatment of waste moulding refractory materials, enabling a recovery of at least one of the components having properties similar to those of the fresh component, and reuse for production of casting moulds and cores. However, at present, there is a lack of a reclaimed material assessment index, which could be applied to each type of moulding sand and reclaim. Modern investigation methods and equipment for the estimation of the quality of the moulding sands matrices with organic binders, in their circulation process, are presented in this paper. These methods, utilizing the special equipment combined with the author's investigation methods developed in the Faculty of Foundry Engineering, AGH - University of Science and Technology, allow the better estimation of the matrix quality both in an aspect of its application as a fresh sand substitute in the preparation of moulding sands, and also with regard to the environmental protection. The most important criteria for the technological assessment of the reclaimed materials and the quality of sands with organic binders are presented in this paper.展开更多
Mechanical reclamation processes of spent moulding sands generate large amounts of postreclamation dusts mainly containing rubbed spent binding agents and quartz dusts. The amount of postreclamation dusts, depending i...Mechanical reclamation processes of spent moulding sands generate large amounts of postreclamation dusts mainly containing rubbed spent binding agents and quartz dusts. The amount of postreclamation dusts, depending in the reclamation system effi ciency and the reclaim dedusting system, can reach 5%-10% in relation to the total reclaimed spent moulding sand. The proper utilization of such material is a big problem facing foundries these days. This study presents the results of investigations of physicochemical properties of post- reclamation dusts. All tested dusts originated from various Polish cast steel plants applying the mechanical reclamation process of moulding sands with alkaline resins, obtained from different producers. Different dusts, delivered from foundries, were tested to determine their chemical composition, granular characterization, physicochemical and energetic properties. Presented results confi rmed assumptions that it is possible to utilize dusts generated during mechanical reclamation of used sands with organic resins as a source of energy.展开更多
Larger and larger proportions of aluminium castings,especially those produced by the die casting process,can be observed during recent years in the automotive industry,house-hold articles and others.In case of the aut...Larger and larger proportions of aluminium castings,especially those produced by the die casting process,can be observed during recent years in the automotive industry,house-hold articles and others.In case of the automotive industry,apart from the traditional elements produced by the die pressure method such as engine blocks or crank shaft bedplates,aluminium is displacing steel from structural parts of cars('body in white').The current state and development directions of the structural solutions of cold-chamber die castings are analysed in this paper.These solutions drive the prospective development of these machines and die casting technology.The focus is mainly on essential functional systems such as:hydraulic drives of closing and locking units,as well as pressing in die machines of known companies present on the European market.展开更多
基金co-financed by the European Regional Development Fund within the framework of the Polish Innovative Optional Programme,No.WND-POIG.01.03.01-12-007/09
文摘Reclamation of used moulding and core sands has been defined as a treatment of waste moulding refractory materials, enabling a recovery of at least one of the components having properties similar to those of the fresh component, and reuse for production of casting moulds and cores. However, at present, there is a lack of a reclaimed material assessment index, which could be applied to each type of moulding sand and reclaim. Modern investigation methods and equipment for the estimation of the quality of the moulding sands matrices with organic binders, in their circulation process, are presented in this paper. These methods, utilizing the special equipment combined with the author's investigation methods developed in the Faculty of Foundry Engineering, AGH - University of Science and Technology, allow the better estimation of the matrix quality both in an aspect of its application as a fresh sand substitute in the preparation of moulding sands, and also with regard to the environmental protection. The most important criteria for the technological assessment of the reclaimed materials and the quality of sands with organic binders are presented in this paper.
基金financed by The Polish National Centre for Research and Development within the project INNOTECH-K1/IN1/57/156360/NCBR/12
文摘Mechanical reclamation processes of spent moulding sands generate large amounts of postreclamation dusts mainly containing rubbed spent binding agents and quartz dusts. The amount of postreclamation dusts, depending in the reclamation system effi ciency and the reclaim dedusting system, can reach 5%-10% in relation to the total reclaimed spent moulding sand. The proper utilization of such material is a big problem facing foundries these days. This study presents the results of investigations of physicochemical properties of post- reclamation dusts. All tested dusts originated from various Polish cast steel plants applying the mechanical reclamation process of moulding sands with alkaline resins, obtained from different producers. Different dusts, delivered from foundries, were tested to determine their chemical composition, granular characterization, physicochemical and energetic properties. Presented results confi rmed assumptions that it is possible to utilize dusts generated during mechanical reclamation of used sands with organic resins as a source of energy.
文摘Larger and larger proportions of aluminium castings,especially those produced by the die casting process,can be observed during recent years in the automotive industry,house-hold articles and others.In case of the automotive industry,apart from the traditional elements produced by the die pressure method such as engine blocks or crank shaft bedplates,aluminium is displacing steel from structural parts of cars('body in white').The current state and development directions of the structural solutions of cold-chamber die castings are analysed in this paper.These solutions drive the prospective development of these machines and die casting technology.The focus is mainly on essential functional systems such as:hydraulic drives of closing and locking units,as well as pressing in die machines of known companies present on the European market.
