Manned multi-rotor electric Vertical Takeoff and Landing(eVTOL)aircraft is prone to actuator saturation due to its weak yaw control efficiency.To address this inherent problem,a rotor cross-tilt configuration is appli...Manned multi-rotor electric Vertical Takeoff and Landing(eVTOL)aircraft is prone to actuator saturation due to its weak yaw control efficiency.To address this inherent problem,a rotor cross-tilt configuration is applied in this paper,with an optimization method proposed to improve the overall control efficiency of the vehicle.First,a flight dynamics model of a 500-kg manned multi-rotor eVTOL aircraft is established.The accuracy of the co-axial rotor model is verified using a single arm test bench,and the accuracy of the flight dynamics model is verified by the flight test data.Then,an optimization method is designed based on the flight dynamics model to calculate an optimal rotor cross-tilt mounting angle,which not only improves the yaw control efficiency,but also basically maintains the efficiency of other control channels.The ideal rotor cross-tilt mounting angle for the prototype is determined by comprehensively considering the optimal results with different payloads,forward flight speeds,and rotor mounting angle errors.Finally,the feasibility of the rotor cross-tilt mounting angle is proved by analyzing the control derivatives of the flight dynamics model,the test data of a ground three Degree-of-Freedom(3DOF)platform,and the actual flight data of the prototype.The results show that a fixed rotor cross-tilt mounting angle can achieve ideal yaw control effectiveness,improving yaw angle tracking and hold ability,increasing endurance time,and achieving good yaw control performance with different payloads and forward speeds.展开更多
The Differential Longitudinal Cyclic Pitch(DLCP)in coaxial compound helicopter is found to be useful in mitigating low-speed rotor interactions and improving flight performance.The complex mutual interaction is simula...The Differential Longitudinal Cyclic Pitch(DLCP)in coaxial compound helicopter is found to be useful in mitigating low-speed rotor interactions and improving flight performance.The complex mutual interaction is simulated by a revised rotor aerodynamics model,where an improved Blade Element Momentum Theory(BEMT)is proposed.Comparisons with the rotor inflow distributions and aircraft trim results from literature validate the accuracy of the model.Then,the influence of the DLCP on the flight dynamics of the aircraft is analysed.The trim characteristics indicate that a negative DLCP can reduce collective and differential collective inputs in low speed forward flight,and the negative longitudinal gradient is alleviated.Moreover,a moderate DLCP can reduce the rotor and total power consumption by 4.68%and 2.9%,respectively.As DLCP further increases,the increased propeller power and unbalanced thrust allocation offset the improvement.In high-speed flight,DLCP does not improve the performance except for extra lateral and heading stick displacements.In addition,the tip clearance is degraded throughout the speed envelope due to the differential pitching moment and the higher thrust from the lower rotor.Meanwhile,the changed rotor efficiency and induced velocity alter low-speed dynamic stability and controllability.The pitch and roll subsidences are slightly degraded with the DLCP,while the heave subsidence,dutch roll and phugoid modes are improved.Lastly,the on-axis controllability,including collective,differential collective pitch,longitudinal and lateral cyclic pitches,varies with DLCP due to its effect on rotor efficiency and inflow distribution.In conclusion,a reasonable DLCP is recommended to adjust the rotor interaction and improve aircraft performance,and further to alter the flight dynamics and aerodynamics of aircraft.展开更多
An augmented flight dynamics model is developed to extend the existing flight dynamics model of tilt-rotor aircraft for optimal landing procedure analysis in the event of one engine failure.Compared with the existing ...An augmented flight dynamics model is developed to extend the existing flight dynamics model of tilt-rotor aircraft for optimal landing procedure analysis in the event of one engine failure.Compared with the existing flight dynamics model, the augmented model involves with more pilot control information in cockpit and is validated against the flight test data. Based on the augmented flight dynamics model, the optimal landing procedure of XV-15 tilt-rotor aircraft after one engine failure is formulated into a Nonlinear Optimal Control Problem(NOCP), solved by collocation and numerical optimization method. The time histories of pilot controls in cockpit during the optimal landing procedure are obtained for the evaluation of pilot workload. An evaluation method which can synthetically quantify the pilot workload in time and frequency domains is proposed with metrics of aggressiveness and cutoff frequencies of pilot controls. The scale of the pilot workload is compared with those of the shipboard landing procedures, bob-up/bob-down and dash/quickstop maneuvers of UH-60 helicopter. The results show that the aggressiveness of pilot collective and longitudinal controls for the tilt-rotor aircraft optimal landing procedure after one engine failure are higher than those for UH-60 helicopter shipboard landing procedures up to the condition of sea state 4, while the pilot cutoff frequency of collective control is lower than that of the bob-up/bob-down maneuver but the pilot cutoff frequency of longitudinal control is higher than that of the dash/quick-stop maneuver. The evaluated pilot workload level is between Cooper–Harper HQR Level 2 and Level 3.展开更多
The coaxial compound helicopter has two possible strategies for heading control: collective differential and rudder deflection. A flight dynamics model is developed to assess the effect of different heading control st...The coaxial compound helicopter has two possible strategies for heading control: collective differential and rudder deflection. A flight dynamics model is developed to assess the effect of different heading control strategies. This includes the trim characteristics, steady flight performance,controllability, and manoeuvrability. The trim study demonstrates that heading control strategies are less influential on trim results, and the steady flight performance is also not significantly affected by the heading control strategy adopted. The controllability analysis shows although heading bandwidth and phase delay results at various speeds with different heading control strategies are all satisfied, the control derivative of the collective differential decreases as speed increases, and its heading aggressive agility is degraded into Level 3 in high-speed flight. In addition, using collective differential would lead to severe heading-rolling coupling as forward speed increases. On the contrary, the control derivative and aggressive agility of the rudder deflection is improved with forward speed, and there is no evidence of heading-rolling coupling. Finally, the transient turn MissionTask-Element(MTE) is utilized to investigate the heading manoeuvre characteristics in different heading control strategies, which indicates that the collective differential would add the amplitude of control input and the power consumption during this MTE.展开更多
This study aims to provide the pilot with optimal control time histories for stabilization of a helicopter after releasing the slung load in aerial delivery missions. A model with 21 degrees of freedom(21-DOF) has bee...This study aims to provide the pilot with optimal control time histories for stabilization of a helicopter after releasing the slung load in aerial delivery missions. A model with 21 degrees of freedom(21-DOF) has been developed and validated for a helicopter slung load system. The control history is generated with detailed procedure based on trajectory optimization. Effects of the objective function formulation on the results are discussed and rules are obtained to assist in the objective function determination. We conclude that the pilot should first decrease and then increase the collective control and adjust the longitudinal control to stabilize the helicopter after the in-hover slung load release. The obtained control history is reasonable and helpful for safety and efficiency improvement. Effects of path constraints and the Flight Control System(FCS) are studied. More stringent path constraints will lead to longer time spent and more controls. Stronger stiffness and weaker damping from the FCS will cause milder control histories but sharper on-axis state histories.展开更多
This paper presents a method to predict the pilot workload in helicopter landing after one engine failure.The landing procedure is simulated numerically via applying nonlinear optimal control method in the form of per...This paper presents a method to predict the pilot workload in helicopter landing after one engine failure.The landing procedure is simulated numerically via applying nonlinear optimal control method in the form of performance index,path constraints and boundary conditions based on an augmented six-degree-of-freedom rigid-body flight dynamics model,solved by collocation and numerical optimization method.UH-60 A helicopter is taken as the sample for the demonstration of landing after one engine failure.The numerical simulation was conducted to find the trajectory of helicopter and the controls from pilot for landing after one engine failure with different performance index considering the factor of pilot workload.The reasonable performance index and corresponding landing trajectory and controls are obtained by making a comparison with those from the flight test data.Furthermore,the pilot workload is evaluated based on wavelet transform analysis of the pilot control activities.The workloads of pilot control activities for collective control,longitudinal and lateral cyclic controls and pedal control during the helicopter landing after one engine failure are examined and compared with those of flight test.The results show that when the performance index considers the factor of pilot workload properly,the characteristics of amplitudes and constituent frequencies of pilot control inputs in the optimal solution are consistent with those of the pilot control inputs in the flight test.Therefore,the proposed method provides a tool of predicting the pilot workload in helicopter landing after one engine failure.展开更多
基金co-supported by the National Natural Science Foundation of China(Nos.12202406,11672128)。
文摘Manned multi-rotor electric Vertical Takeoff and Landing(eVTOL)aircraft is prone to actuator saturation due to its weak yaw control efficiency.To address this inherent problem,a rotor cross-tilt configuration is applied in this paper,with an optimization method proposed to improve the overall control efficiency of the vehicle.First,a flight dynamics model of a 500-kg manned multi-rotor eVTOL aircraft is established.The accuracy of the co-axial rotor model is verified using a single arm test bench,and the accuracy of the flight dynamics model is verified by the flight test data.Then,an optimization method is designed based on the flight dynamics model to calculate an optimal rotor cross-tilt mounting angle,which not only improves the yaw control efficiency,but also basically maintains the efficiency of other control channels.The ideal rotor cross-tilt mounting angle for the prototype is determined by comprehensively considering the optimal results with different payloads,forward flight speeds,and rotor mounting angle errors.Finally,the feasibility of the rotor cross-tilt mounting angle is proved by analyzing the control derivatives of the flight dynamics model,the test data of a ground three Degree-of-Freedom(3DOF)platform,and the actual flight data of the prototype.The results show that a fixed rotor cross-tilt mounting angle can achieve ideal yaw control effectiveness,improving yaw angle tracking and hold ability,increasing endurance time,and achieving good yaw control performance with different payloads and forward speeds.
基金supported by A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China。
文摘The Differential Longitudinal Cyclic Pitch(DLCP)in coaxial compound helicopter is found to be useful in mitigating low-speed rotor interactions and improving flight performance.The complex mutual interaction is simulated by a revised rotor aerodynamics model,where an improved Blade Element Momentum Theory(BEMT)is proposed.Comparisons with the rotor inflow distributions and aircraft trim results from literature validate the accuracy of the model.Then,the influence of the DLCP on the flight dynamics of the aircraft is analysed.The trim characteristics indicate that a negative DLCP can reduce collective and differential collective inputs in low speed forward flight,and the negative longitudinal gradient is alleviated.Moreover,a moderate DLCP can reduce the rotor and total power consumption by 4.68%and 2.9%,respectively.As DLCP further increases,the increased propeller power and unbalanced thrust allocation offset the improvement.In high-speed flight,DLCP does not improve the performance except for extra lateral and heading stick displacements.In addition,the tip clearance is degraded throughout the speed envelope due to the differential pitching moment and the higher thrust from the lower rotor.Meanwhile,the changed rotor efficiency and induced velocity alter low-speed dynamic stability and controllability.The pitch and roll subsidences are slightly degraded with the DLCP,while the heave subsidence,dutch roll and phugoid modes are improved.Lastly,the on-axis controllability,including collective,differential collective pitch,longitudinal and lateral cyclic pitches,varies with DLCP due to its effect on rotor efficiency and inflow distribution.In conclusion,a reasonable DLCP is recommended to adjust the rotor interaction and improve aircraft performance,and further to alter the flight dynamics and aerodynamics of aircraft.
基金supported by the National Natural Science Foundation of China (No. 11672128)
文摘An augmented flight dynamics model is developed to extend the existing flight dynamics model of tilt-rotor aircraft for optimal landing procedure analysis in the event of one engine failure.Compared with the existing flight dynamics model, the augmented model involves with more pilot control information in cockpit and is validated against the flight test data. Based on the augmented flight dynamics model, the optimal landing procedure of XV-15 tilt-rotor aircraft after one engine failure is formulated into a Nonlinear Optimal Control Problem(NOCP), solved by collocation and numerical optimization method. The time histories of pilot controls in cockpit during the optimal landing procedure are obtained for the evaluation of pilot workload. An evaluation method which can synthetically quantify the pilot workload in time and frequency domains is proposed with metrics of aggressiveness and cutoff frequencies of pilot controls. The scale of the pilot workload is compared with those of the shipboard landing procedures, bob-up/bob-down and dash/quickstop maneuvers of UH-60 helicopter. The results show that the aggressiveness of pilot collective and longitudinal controls for the tilt-rotor aircraft optimal landing procedure after one engine failure are higher than those for UH-60 helicopter shipboard landing procedures up to the condition of sea state 4, while the pilot cutoff frequency of collective control is lower than that of the bob-up/bob-down maneuver but the pilot cutoff frequency of longitudinal control is higher than that of the dash/quick-stop maneuver. The evaluated pilot workload level is between Cooper–Harper HQR Level 2 and Level 3.
基金supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions of China, the program of China Scholarships Council (No. 201706830016)the National Natural Science Foundation of China (No. 11672128)
文摘The coaxial compound helicopter has two possible strategies for heading control: collective differential and rudder deflection. A flight dynamics model is developed to assess the effect of different heading control strategies. This includes the trim characteristics, steady flight performance,controllability, and manoeuvrability. The trim study demonstrates that heading control strategies are less influential on trim results, and the steady flight performance is also not significantly affected by the heading control strategy adopted. The controllability analysis shows although heading bandwidth and phase delay results at various speeds with different heading control strategies are all satisfied, the control derivative of the collective differential decreases as speed increases, and its heading aggressive agility is degraded into Level 3 in high-speed flight. In addition, using collective differential would lead to severe heading-rolling coupling as forward speed increases. On the contrary, the control derivative and aggressive agility of the rudder deflection is improved with forward speed, and there is no evidence of heading-rolling coupling. Finally, the transient turn MissionTask-Element(MTE) is utilized to investigate the heading manoeuvre characteristics in different heading control strategies, which indicates that the collective differential would add the amplitude of control input and the power consumption during this MTE.
基金supported by the National Natural Science Foundation of China (Nos. 11672128)A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions。
文摘This study aims to provide the pilot with optimal control time histories for stabilization of a helicopter after releasing the slung load in aerial delivery missions. A model with 21 degrees of freedom(21-DOF) has been developed and validated for a helicopter slung load system. The control history is generated with detailed procedure based on trajectory optimization. Effects of the objective function formulation on the results are discussed and rules are obtained to assist in the objective function determination. We conclude that the pilot should first decrease and then increase the collective control and adjust the longitudinal control to stabilize the helicopter after the in-hover slung load release. The obtained control history is reasonable and helpful for safety and efficiency improvement. Effects of path constraints and the Flight Control System(FCS) are studied. More stringent path constraints will lead to longer time spent and more controls. Stronger stiffness and weaker damping from the FCS will cause milder control histories but sharper on-axis state histories.
基金supported by the National Natural Science Foundation of China(No.11672128)。
文摘This paper presents a method to predict the pilot workload in helicopter landing after one engine failure.The landing procedure is simulated numerically via applying nonlinear optimal control method in the form of performance index,path constraints and boundary conditions based on an augmented six-degree-of-freedom rigid-body flight dynamics model,solved by collocation and numerical optimization method.UH-60 A helicopter is taken as the sample for the demonstration of landing after one engine failure.The numerical simulation was conducted to find the trajectory of helicopter and the controls from pilot for landing after one engine failure with different performance index considering the factor of pilot workload.The reasonable performance index and corresponding landing trajectory and controls are obtained by making a comparison with those from the flight test data.Furthermore,the pilot workload is evaluated based on wavelet transform analysis of the pilot control activities.The workloads of pilot control activities for collective control,longitudinal and lateral cyclic controls and pedal control during the helicopter landing after one engine failure are examined and compared with those of flight test.The results show that when the performance index considers the factor of pilot workload properly,the characteristics of amplitudes and constituent frequencies of pilot control inputs in the optimal solution are consistent with those of the pilot control inputs in the flight test.Therefore,the proposed method provides a tool of predicting the pilot workload in helicopter landing after one engine failure.
