We are evaluating dryland cotton production in Martin County, Texas, measuring cotton lint yield per unit of rainfall. Our goal is to collect rainfall data per 250 - 400 ha. Upon selection of a rainfall gauge, we real...We are evaluating dryland cotton production in Martin County, Texas, measuring cotton lint yield per unit of rainfall. Our goal is to collect rainfall data per 250 - 400 ha. Upon selection of a rainfall gauge, we realized that the cost of using, for example, a tipping bucket-type rain gauge would be too expensive and thus searched for an alternative method. We selected an all-in-one commercially available weather station;hereafter, referred to as a Personal Weather Station (PWS) that is both wireless and solar powered. Our objective was to evaluate average measurements of rainfall obtained with the PWS and to compare these to measurements obtained with an automatic weather station (AWS). For this purpose, we installed four PWS deployed within 20 m of the Plant Stress and Water Conservation Meteorological Tower that was used as our AWS, located at USDA-ARS Cropping Systems Research Laboratory, Lubbock, TX. In addition, we measured and compared hourly average values of short-wave irradiance (R<sub>g</sub>), air temperature (T<sub>air</sub>) and relative humidity (RH), and wind speed (WS), and calculated values of dewpoint temperature (T<sub>dew</sub>). This comparison was done over a 242-day period (1 October 2022-31 May 2023) and results indicated that there was no statistical difference in measurements of rainfall between the PWS and AWS. Hourly average values of R<sub>g</sub> measured with the PWS and AWS agreed on clear days, but PWS measurements were higher on cloudy days. There was no statistical difference between PWS and AWS hourly average measurements of T<sub>air</sub>, RH, and calculated T<sub>dew</sub>. Hourly average measurements of R<sub>g</sub> and WS were more variable. We concluded that the PWS we selected will provide adequate values of rainfall and other weather variables to meet our goal of evaluating dryland cotton lint yield per unit rainfall.展开更多
Crop production in the Texas High Plains is shifting from irrigated to dryland due to the increase of the depth to the water table from the Ogallala aquifer in regions where the saturated thickness of 9 m, the minimum...Crop production in the Texas High Plains is shifting from irrigated to dryland due to the increase of the depth to the water table from the Ogallala aquifer in regions where the saturated thickness of 9 m, the minimum to sustain irrigation, has been reached. Our objective was to use the mechanistic model ENWATBAL to evaluate the daily and annual water balance for three scenarios of rainfall in this region, a dry (189 mm), an average (449 mm) and a wet (669 mm) year. These three scenarios were applied to two major soil series of this region, Pullman and Amarillo. In all simulations, we used hourly input weather data for a location near Lubbock, Texas and used measured soil hydraulic properties to simulate the water balance for each soil series and the three rainfall scenarios. Results showed that in years with average and wet rain, storage of rainfall occurred in the Pullman but not in in the Amarillo soil series. However, storage of water could be enhanced by combining furrow dikes with minimum tillage along with crop covers that provide a surface residue. The implications of our results for dryland crop production in the semiarid climate of the THP suggest that for years with average and wetter rainfall soils in the Pullman series could store water that would be available for crop use. However, this was not the case for the Amarillo soil series and these soils represent a higher risk for dryland crop production.展开更多
Although inorganic phosphate is an essential plant nutrient, elevated levels in surface waters lead to adverse effects in the environment. These effects are attributed to runoff from rain or irrigation events that may...Although inorganic phosphate is an essential plant nutrient, elevated levels in surface waters lead to adverse effects in the environment. These effects are attributed to runoff from rain or irrigation events that may cause the sorbed phosphate to be transported from the application sites and to move into neighboring watersheds. Increased phosphate concentration in watersheds may lead to a variety of environmental problems including increased algal blooms, bacterial contamination, and in some cases eutrophication. To overcome these effects, polymer flocculants have been shown to reduce the phosphate concentration in water by removing suspended solids and thereby removing the phosphate sorbed to the solids. The purpose of this study is to determine the amount, if any, of phosphate removed by several commercial polymers. The polymers chosen include the polyacrylamides Magnifloc 494C, Magnifloc 985N and Poly (diallyldimethyl ammonium chloride) (Poly (DADMAC)). Using these polymers, it is discovered that the positive charge density of the polymers affects the amount of phosphate removed from solution with Poly (DADMAC) (having 100% positive charge density) removing 40% of the phosphate from a solution containing 10 ppm phosphate.展开更多
Inorganic phosphate is a common nutrient that is applied as a fertilizer to both agricultural fields as well as urban settings such as private yards, public parks and other urban landscaping. While phosphate typically...Inorganic phosphate is a common nutrient that is applied as a fertilizer to both agricultural fields as well as urban settings such as private yards, public parks and other urban landscaping. While phosphate typically binds tightly to soil, movement of phosphate off of application sites can occur through soil erosion. The soil and its bound phosphate can then end up in surface waters such as rivers and lakes. Phosphate found in surface water bodies exists both as bound to the suspended clay as well as that free in solution. Elevated phosphate concentration in surface waters can lead to algal blooms and eutrophication. While the phosphate bound to clay in suspension in surface water bodies can be removed by commercially available polymer flocculants, the phosphate that is free in solution is more challenging as it is usually found in low concentrations and other anionic salts are generally present in higher concentrations. To remove phosphate from contaminated water systems, where other anions exist at higher concentrations, it is favorable to have a method of removal that is selective for phosphate. As a proof of principle, thiourea derivatized polymer flocculants were examined for the selective removal of phosphate in the presence of competing anions. The polymer flocculants exhibited selectivity for phosphate through hydrogen bonding and were effective at removing up to 43% of phosphate from simulated wastewater. Computational studies and </span><sup><span style="font-family:Verdana;">1</span></sup><span style="font-family:Verdana;">H NMR were used to investigate the selectivity of the thiourea monomer for phosphate over competing anions such as chloride and sulfate.展开更多
Agriculture in the Texas High Plains (THP) is in a transition phase of producing crops with a diminishing supply of irrigation-water from the Ogallala aquifer to dryland production systems. This shift is driven by the...Agriculture in the Texas High Plains (THP) is in a transition phase of producing crops with a diminishing supply of irrigation-water from the Ogallala aquifer to dryland production systems. This shift is driven by the fact that the depth to the water table of the Ogallala aquifer continues to increase. Dryland cotton production systems are prevalent in the southern counties of the THP and our purpose was to use the long-term dryland cotton lint yields from these counties as precursors of the future cotton production patterns that will emerge in this region. For this purpose, from 1972 to 2018, we calculated the ratio of dryland cotton lint yield per unit of annual rainfall at the county level. This ratio is called crop water productivity (CWP) and has units of mass per unit volume (g/m<sup>3</sup>). In our analysis, we used cotton lint yield data provided by the National Agricultural Statistics and rainfall data provided by the National Oceanic and Atmospheric Administration. Our results indicated that the three datasets used in our analysis, i.e., cotton lint yield, rainfall and CWP were all normally distributed. In this time period, 1972 to 2018, only one year 2011—a year with a record drought of 179 mm of rain failed to produce a dryland cotton crop in all the counties used in our analysis. The mean cotton lint yield ± standard deviation ranged from a high of 400 ± 175 kg/ha in Lubbock County to a low of 252 ± 144 kg/ha in Andrews County. However, the counties with the largest CWP > 90 g/m<sup>3</sup> were Glasscock, Midland and Martin County. The importance of this result is that these counties are in the southern region of the THP and are subject to extreme environmental conditions and yet cotton producers manage to produce a cotton crop in most years. We conclude that management production methods used by these dryland producers represent the future schemes that will need to be adopted in other counties to sustain the emerging dryland cropping systems across the THP.展开更多
The measurement of crop transpiration (Tcrop</sub>) under field conditions and throughout the growing season is difficult to obtain. An available method uses stem flow gauge sensors, based on the conservation of...The measurement of crop transpiration (Tcrop</sub>) under field conditions and throughout the growing season is difficult to obtain. An available method uses stem flow gauge sensors, based on the conservation of energy and mass, where the calculated sap flow (F) is a direct measure of Tcrop</sub>. This method has been extensively tested on agronomic, horticultural, ornamental aspects and tree crops and the general consensus is that F is a measure of Tcrop</sub>. A new sap flow gauge (EXO-SkinTM</sup> Sap Flow) sensor, with different placement and number of thermocouples, compared to the original sensor, was introduced, resulting in a different energy balance equation to calculate F. Our objective was to compare values of Tcrop</sub> obtained with the new sensor on cotton (Gossypium hirsutum, L) plants to values measured with lysimeters. For this purpose, cotton plants were grown in 11-liter pots in a greenhouse experiment and hourly and daily values of Tcrop</sub> were compared for eight days. We used linear regression analysis to compare the hourly and daily values of Tcrop</sub> measured with the sensor to corresponding values measured with lysimeters on the same plant. Using a t-test (p > 0.05) we tested if the slope of the line was significantly different than 1 and if the intercept was significantly different than 0. This test indicated that there were no statistical differences between hourly and daily values of Tcrop</sub> measured with the new sensor and with the lysimeters. The main advantage of the new sensor is the flexibility of the new heater, allowing for better thermal contact between the plant stem and the temperature sensors. Further, the new sensor requires less wiring and copper connectors, and the number of channels used in a datalogger to record the output from the sensor is reduced by 25%. We conclude that the new sensor correctly measures Tcrop</sub> and that additional experiments with field grown plants are required to test the sensor at higher values of Tcrop</sub>.展开更多
The Conservation Reserve Program (CRP) is a USDA program introduced in 1985 to reduce soil erosion by increasing vegetative cover of highly erodible land. Participation in the CRP is done via contracts (10 - 15 years ...The Conservation Reserve Program (CRP) is a USDA program introduced in 1985 to reduce soil erosion by increasing vegetative cover of highly erodible land. Participation in the CRP is done via contracts (10 - 15 years in length) and currently the total area of land under contract is set to decline as per the 2014 Farm Bill. The Texas High Plains (THP) leads the US with >900,000 ha enrolled in CRP. A potential long- term benefit of CRP is to increase soil organic matter and to improve soil structure leading to increased water infiltration. Our objective was to evaluate the feasibility of using stable isotopes of water to measure and compare infiltration of rain in land under CRP management to land under continuous dryland cotton in the THP. For this purpose we selected two sites, with soils in the Amarillo series, enrolled in CRP, one for 25 years and the second site for 22 years. Results from several rain events showed that stable isotopes of water are a method that can be used to evaluate the depth of rainwater infiltration for soils under CRP and dryland management.展开更多
Simulation models are tools that can be used to explore, for example, effects of cultural practices on soil erosion and irrigation on crop yield. However, often these models require many soil related input data of whi...Simulation models are tools that can be used to explore, for example, effects of cultural practices on soil erosion and irrigation on crop yield. However, often these models require many soil related input data of which the saturated hydraulic conductivity (Ks) is one of the most important ones. These data are usually not available and experimental determination is both expensive and time consuming. Therefore, pedotransfer functions are often used, which make use of simple and often readily available soil information to calculate required input values for models, such as soil hydraulic values. Our objective was to test the Rosetta pedotransfer function to calculate Ks. Research was conducted in a 64-ha field near Lamesa, Texas, USA. Field measurements of soil texture and bulk density, and laboratory measurements of soil water retention at field capacity (–33 kPa) and permanent wilting point (–1500 kPa), were taken to implement Rosetta. Calculated values of Ks were then compared to measured Ks on undisturbed soil samples. Results showed that Rosetta could be used to obtain values of Ks for a field with different textures. The Root Mean Square Difference (RMSD) of Ks at 0.15 m soil depth was 7.81 × 10–7 m·s–1. Further, for a given soil texture the variability, from 2.30 × 10–7 to 2.66 × 10–6 m·s-1, of measured Ks was larger than the corresponding RMSD. We conclude that Rosetta is a tool that can be used to calculate Ks in the absence of measured values, for this particular soil. Level H5 of Rosetta yielded the best results when using the measured input data and thus calculated values of Ks can be used as input in simulation models.展开更多
The need to study the shrink-swell and crack properties of vertic soils has long been recognized given their dynamics in time and space, which modifies the physical properties that impact water and air movement in the...The need to study the shrink-swell and crack properties of vertic soils has long been recognized given their dynamics in time and space, which modifies the physical properties that impact water and air movement in the soil, flow of water into the subsoil and ground water, and generally alter the hydrology of vertic soils. Measurement of crack properties has been made by numerous researchers with the purpose to understand and quantify the spatial and temporal dynamics of shrinking and swelling and the associated formation of cracks. These crack properties, which are important in modifying hydrology of soils are: width, length, depth and orientation of soil’s cracks. To better understand the hydrology of vertic soils and incorporate crack properties into hydrologic simulation models, several techniques have been developed to measure crack properties. However, little attention is given to evaluate both the advantages and the limitations associated with these techniques. Thus, the purpose of this review is to highlight challenges and limitations that have been used or might be used to measure cracking in vertic soils.展开更多
Two sorghum lines, an erect leafed mutant sorghum and the wild type from which the mutant was generated, were field grown in rectilinear arrays at low (10 plants m-2) and high (23 plants m-2) population densities. Can...Two sorghum lines, an erect leafed mutant sorghum and the wild type from which the mutant was generated, were field grown in rectilinear arrays at low (10 plants m-2) and high (23 plants m-2) population densities. Canopy light interception, biomass accretion and yield were measured. Photosynthetically active radiation under the canopy at ground level and midway through the canopy were higher in the erect leafed line, as compared to the normal leafed line. Planting density had less effect on mean grain yield and biomass in the erect leaf line than in the wild type. Though not conclusive, when taken together, the results suggested that optimal planting densities are higher for the erect leaf line and that the erect leaf trait could be useful for incorporation into breeding programs.展开更多
Cotton irrigation in the Texas High Plains (THP) is often dictated by the well capacity and not by the water needs of the crop. The source of irrigation-water is the Ogallala aquifer and in many areas of the THP, the ...Cotton irrigation in the Texas High Plains (THP) is often dictated by the well capacity and not by the water needs of the crop. The source of irrigation-water is the Ogallala aquifer and in many areas of the THP, the water table has declined to well capacities that deliver 1.3 to >7.6 mm/d. There is plenty of information on cotton responses to irrigation frequency and amount;however, information on when to terminate irrigation and its effect on cotton lint yield and fiber quality is scarce. Our objective was to evaluate over a 4-year period three irrigation termination thermal times corresponding to cumulative daily heat units (∑HU) of 890 °C, 1000 °C and 1110 °C from crop emergence, and three levels of irrigation (2.5, 5.1 and 7.6 mm/d) on cotton lint yield and fiber quality. Irrigation was applied with a sprinkler system on a 3-day frequency in Lubbock, TX. Results showed that on average the 7.6 mm/d level produced the most cotton lint yield regardless of the irrigation termination thermal time. Terminating cotton at 1000- °C ∑HU resulted in water savings of 25 to 50 mm for the 2.5 and 5.1 mm/d levels without significantly affecting lint yield. For the 7.6 mm/d and terminating at 890- °C ∑HU resulted in water savings of 100 to 115 mm. Average fiber length statistically increased with termination thermal time and level. This effect was most significant in years with the least rain and warmer air temperature. Micronaire increased with the termination thermal time in years with >500 mm of rain. Average fiber length uniformity and fiber strength were minimally affected by termination thermal time. As irrigation level increased, the average micronaire decreased, and fiber strength increased for the 5.1 and 7.6 mm/d irrigation. We concluded that in the THP for well capacities that deliver 2.5 - 5.1 mm/d irrigation can be terminated when the ∑HU reaches about 1000 °C from emergence without impacting cotton lint yield.展开更多
Cotton (Gossypium hirsutum L.) is planted on more land area than any other crop on the Texas High Plains. Much of this area is considered highly erodible and requires a conservation compliance program to participate i...Cotton (Gossypium hirsutum L.) is planted on more land area than any other crop on the Texas High Plains. Much of this area is considered highly erodible and requires a conservation compliance program to participate in government farm programs. Because this region is semiarid and because irrigation water is increasingly limited, water conservation and efficient use of water are necessary to maximize cotton lint yields. One popular conservation compliance practice used is to plant cotton into a chemically terminated small grain crop, i.e., residue that provides wind protection to the cotton seedlings. Our hypothesis was that in a semiarid region the use of a small grain cover crop under irrigated conditions would use more water than it conserves compared to conventional tilled cotton, thus reducing cotton lint yields. To test the hypothesis separate field studies over two growing seasons and on two soil textures, a loamy fine sand and a clay loam, were conducted. The main treatments were tillage systems (conventional and conservation using terminated wheat residue). The two split plot treatments were water supply based on replacement of calculated grass reference evapotranspiration (ETo). Tillage did not affect the amount of water used by the cotton crop at either location ( 0.05) except for an 80% ETo irrigation treatment at a single location where the bare soil treatment used 10% more water than the residue treatments for both years. The residue treatment decreased (P < 0.05) cotton lint yields at both locations by 12% except for the 50% ETo single irrigation treatment in which the residue treatment yielded 14% more lint than the bare soil treatment. The use of terminated wheat residue had no impact on soil water storage during any part of the year. During a 5-month period associated with wheat growth, the wheat evapotranspiration was 20 to 40 mm more water (P < 0.05) than that lost through soil water evaporation from the conventional treatments. The use of terminated wheat residue did not benefit the water balance of the cotton crop, and was associated with decreased cotton lint yields. The results were consistent with our working hypothesis, and disproved the idea that planting cotton into wheat stubble cover increases water use efficiency.展开更多
In recent years, a significant number of environmental studies have been conducted in New Orleans, LA and surrounding Gulf Coast areas due in part to the occurrence of hurricanes Katrina and Rita. Data collected from ...In recent years, a significant number of environmental studies have been conducted in New Orleans, LA and surrounding Gulf Coast areas due in part to the occurrence of hurricanes Katrina and Rita. Data collected from studies in the New Orleans area indicate that inorganic contaminants including arsenic (As), iron (Fe), lead (Pb), and vanadium (V);high concentration of bioaerosols, particularly Cladosporium and Aspergillus, and several organic pollutants (PAHs, pesticides, and volatiles) may pose a risk to human health in New Orleans. While many of these results resemble historical data, a current quantitative exposure assessment has not been conducted. We engaged in one such assessment for lead (Pb) contamination in surface soils. We used Pb concentrations in surface soils ( μg/day to 102 μg/day for our study area within urbanNew Orleans. These data are concerning because children exposed to >33.5 μg/d Pb may cause their blood-Pb levels to exceed the Centers for Disease Control and Prevention (CDC) threshold for blood-Pb of 10 μg/dL. It has generally been accepted that a more protective blood Pb concentration threshold of 6 - μg/dL is warranted. Using the 6-μg/dL threshold puts children exposed to as little as 20.2 μg/day Pb at risk.展开更多
A major limitation in the use of stable isotope of water in ecological studies is the time that is required to extract water from soil and plant samples. Using vacuum distillation the extraction time can be less than ...A major limitation in the use of stable isotope of water in ecological studies is the time that is required to extract water from soil and plant samples. Using vacuum distillation the extraction time can be less than one hour per sample. Therefore, assembling a distillation system that can process multiple samples simultaneously is advantageous and necessary for ecological or hydrological investigations. Presented here is a vacuum distillation apparatus, having six ports, that can process up to 30 samples per day. The distillation system coupled with the Los Gatos Research DLT-100 Liquid Water Isotope Analyzer is capable of analyzing all of the samples that are generated by vacuum distillation. These two systems allow larger sampling rates making investigations into water movement through an ecological system possible at higher temporal and spatial resolution.展开更多
An existing Purdue-type rainfall simulator (RFS) was designed to be transported using a commercial flatbed trailer that was modified by cutting out a section of the wooden bed allowing the RFS to be positioned directl...An existing Purdue-type rainfall simulator (RFS) was designed to be transported using a commercial flatbed trailer that was modified by cutting out a section of the wooden bed allowing the RFS to be positioned directly above the target area to measure soil erosion and water runoff. To allow water to pass through the trailer undisturbed, the axle of the trailer was removed and replaced with axle-free wheel hubs and springs. Additionally, a remote control mover rated for 2000 kg was incorporated in our design. The final result was a portable and mobile RFS that can be moved to fields using a trailer hitch and can be operated by two individuals. The cost of the hardware, not including the RFS, is $5300 (USD) and detailed design plans are available.展开更多
Herein we describe an approach to measure the volume and to characterize the volume distribution of large numbers of individual small regularly shaped seeds. The results of a preliminary investigation into the distrib...Herein we describe an approach to measure the volume and to characterize the volume distribution of large numbers of individual small regularly shaped seeds. The results of a preliminary investigation into the distribution of seed size of a multi-seeded sorghum mutant, as compared to the wild type from which it was developed are also reported, and are used as an example of the method’s utility.展开更多
Acoustic emissions (AEs) from xylem cavitation events are characteristic of transpiration processes. Though a body of work exists describing AEs and limited stem hydraulic conductivity under water stress, there is lim...Acoustic emissions (AEs) from xylem cavitation events are characteristic of transpiration processes. Though a body of work exists describing AEs and limited stem hydraulic conductivity under water stress, there is limited information about the effects of AEs on stomatal aperture and limitation on carbon assimilation. The objective of this work was to relate AEs to drought stress in cotton. Cotton was grown in mini-lysimeters in the greenhouse and instrumented with a portable photosynthesis system and ultrasonic transducers connected to a digital signal-processing unit. Whole plant transpiration, leaf level gas exchange and ultrasonic AEs were measured. Xylem cavitation events temporally associated with the onset of drought stress. The results are consistent with stomatal closure in response to reduced hydraulic conductance from xylem cavitation events. Clear direct empirical evidence of a reduction in carbon assimilation associated with xylem cavitation resulting from water stress is presented.展开更多
Multiseed (msd) mutant sorghum [Sorghum bicolor (L.) Moench] lines with greatly increased seed numbers were developed. It was originally thought that the msd trait could increase grain yield several times in compariso...Multiseed (msd) mutant sorghum [Sorghum bicolor (L.) Moench] lines with greatly increased seed numbers were developed. It was originally thought that the msd trait could increase grain yield several times in comparison with the wild type from which the mutant was derived. However, in a small plot trial, msd seed yield decreased when compared to the parent line. Herein we report results that msd seed yield remained either unchanged or slightly increased in comparison to the parent line. We suggest that attempts to measure msd sorghum seed yield were complicated due to systematic errors associated with the post-harvest processing methods, including threshing and pneumatic winnowing equipment that was used for harvest. That is, seed recovery and seed loss from individual panicles were affected by the post-harvest processing. When evaluating sorghum grain yield of types with different seed sizes, threshing and seed cleaning harvesting methods should be optimized for each sorghum line.展开更多
An allelic sorghum [Sorghum bicolor (L.) Moench] mutant with thick and narrow erect leaves (Thl) and reduced adaxial stomatal density was isolated from the Annotated Individually pedigreed Mutagenized Sorghum mutant l...An allelic sorghum [Sorghum bicolor (L.) Moench] mutant with thick and narrow erect leaves (Thl) and reduced adaxial stomatal density was isolated from the Annotated Individually pedigreed Mutagenized Sorghum mutant library developed at the Plant Stress and Germplasm Development Unit at Lubbock TX. The mutant, Thl, was isolated from a pedigreed M3 family generated by ethyl methanesulfonate mutagenization from an elite inbred sorghum line, BTx623, which had been used to sequence the sorghum genome. The mutant has been backcrossed to the wild-type BTx623 confirming that the trait results derive from a stable recessive nuclear gene mutation. Herein, we briefly described morphological and selected physiological characteristics of this mutant sorghum.展开更多
Bird damage is a problem in sorghum breeding and germplasm maintenance operations. Paper pollination bags are damaged by rain and provide minimal deterrent to birds. Earlier we reported upon bird resistance of spun po...Bird damage is a problem in sorghum breeding and germplasm maintenance operations. Paper pollination bags are damaged by rain and provide minimal deterrent to birds. Earlier we reported upon bird resistance of spun polyethylene pollination bags. Herein, we report the potential for pollen transmission through, and the microenvironment within, hard form (HfT) and soft form (SfT) spun polyethylene pollination bags as compared to traditional Paper pollination bags. Within Paper pollination bags morning temperatures were 10°C - 15°C above ambient and high temperature excursions as high as 45°C were measured. Heating in Sft and HfT was 25% and 50% that of Paper, respectively. Temperature differences between bags were attributed to differences in albedo and air permeability of the bag materials. No difference in pollen transmission through Paper and HfT was found. Although SfT allowed 35% - 40% wind borne pollen through the pores as compared to controls, male sterile plants covered with SfT produced only 30 seeds/panicle, about 1% of a self-pollinating fertile plant. Our results suggested that SfT could adequately reduce or eliminate cross-pollination in self-pollinating plants while maintaining near ambient environmental conditions.展开更多
文摘We are evaluating dryland cotton production in Martin County, Texas, measuring cotton lint yield per unit of rainfall. Our goal is to collect rainfall data per 250 - 400 ha. Upon selection of a rainfall gauge, we realized that the cost of using, for example, a tipping bucket-type rain gauge would be too expensive and thus searched for an alternative method. We selected an all-in-one commercially available weather station;hereafter, referred to as a Personal Weather Station (PWS) that is both wireless and solar powered. Our objective was to evaluate average measurements of rainfall obtained with the PWS and to compare these to measurements obtained with an automatic weather station (AWS). For this purpose, we installed four PWS deployed within 20 m of the Plant Stress and Water Conservation Meteorological Tower that was used as our AWS, located at USDA-ARS Cropping Systems Research Laboratory, Lubbock, TX. In addition, we measured and compared hourly average values of short-wave irradiance (R<sub>g</sub>), air temperature (T<sub>air</sub>) and relative humidity (RH), and wind speed (WS), and calculated values of dewpoint temperature (T<sub>dew</sub>). This comparison was done over a 242-day period (1 October 2022-31 May 2023) and results indicated that there was no statistical difference in measurements of rainfall between the PWS and AWS. Hourly average values of R<sub>g</sub> measured with the PWS and AWS agreed on clear days, but PWS measurements were higher on cloudy days. There was no statistical difference between PWS and AWS hourly average measurements of T<sub>air</sub>, RH, and calculated T<sub>dew</sub>. Hourly average measurements of R<sub>g</sub> and WS were more variable. We concluded that the PWS we selected will provide adequate values of rainfall and other weather variables to meet our goal of evaluating dryland cotton lint yield per unit rainfall.
文摘Crop production in the Texas High Plains is shifting from irrigated to dryland due to the increase of the depth to the water table from the Ogallala aquifer in regions where the saturated thickness of 9 m, the minimum to sustain irrigation, has been reached. Our objective was to use the mechanistic model ENWATBAL to evaluate the daily and annual water balance for three scenarios of rainfall in this region, a dry (189 mm), an average (449 mm) and a wet (669 mm) year. These three scenarios were applied to two major soil series of this region, Pullman and Amarillo. In all simulations, we used hourly input weather data for a location near Lubbock, Texas and used measured soil hydraulic properties to simulate the water balance for each soil series and the three rainfall scenarios. Results showed that in years with average and wet rain, storage of rainfall occurred in the Pullman but not in in the Amarillo soil series. However, storage of water could be enhanced by combining furrow dikes with minimum tillage along with crop covers that provide a surface residue. The implications of our results for dryland crop production in the semiarid climate of the THP suggest that for years with average and wetter rainfall soils in the Pullman series could store water that would be available for crop use. However, this was not the case for the Amarillo soil series and these soils represent a higher risk for dryland crop production.
文摘Although inorganic phosphate is an essential plant nutrient, elevated levels in surface waters lead to adverse effects in the environment. These effects are attributed to runoff from rain or irrigation events that may cause the sorbed phosphate to be transported from the application sites and to move into neighboring watersheds. Increased phosphate concentration in watersheds may lead to a variety of environmental problems including increased algal blooms, bacterial contamination, and in some cases eutrophication. To overcome these effects, polymer flocculants have been shown to reduce the phosphate concentration in water by removing suspended solids and thereby removing the phosphate sorbed to the solids. The purpose of this study is to determine the amount, if any, of phosphate removed by several commercial polymers. The polymers chosen include the polyacrylamides Magnifloc 494C, Magnifloc 985N and Poly (diallyldimethyl ammonium chloride) (Poly (DADMAC)). Using these polymers, it is discovered that the positive charge density of the polymers affects the amount of phosphate removed from solution with Poly (DADMAC) (having 100% positive charge density) removing 40% of the phosphate from a solution containing 10 ppm phosphate.
文摘Inorganic phosphate is a common nutrient that is applied as a fertilizer to both agricultural fields as well as urban settings such as private yards, public parks and other urban landscaping. While phosphate typically binds tightly to soil, movement of phosphate off of application sites can occur through soil erosion. The soil and its bound phosphate can then end up in surface waters such as rivers and lakes. Phosphate found in surface water bodies exists both as bound to the suspended clay as well as that free in solution. Elevated phosphate concentration in surface waters can lead to algal blooms and eutrophication. While the phosphate bound to clay in suspension in surface water bodies can be removed by commercially available polymer flocculants, the phosphate that is free in solution is more challenging as it is usually found in low concentrations and other anionic salts are generally present in higher concentrations. To remove phosphate from contaminated water systems, where other anions exist at higher concentrations, it is favorable to have a method of removal that is selective for phosphate. As a proof of principle, thiourea derivatized polymer flocculants were examined for the selective removal of phosphate in the presence of competing anions. The polymer flocculants exhibited selectivity for phosphate through hydrogen bonding and were effective at removing up to 43% of phosphate from simulated wastewater. Computational studies and </span><sup><span style="font-family:Verdana;">1</span></sup><span style="font-family:Verdana;">H NMR were used to investigate the selectivity of the thiourea monomer for phosphate over competing anions such as chloride and sulfate.
文摘Agriculture in the Texas High Plains (THP) is in a transition phase of producing crops with a diminishing supply of irrigation-water from the Ogallala aquifer to dryland production systems. This shift is driven by the fact that the depth to the water table of the Ogallala aquifer continues to increase. Dryland cotton production systems are prevalent in the southern counties of the THP and our purpose was to use the long-term dryland cotton lint yields from these counties as precursors of the future cotton production patterns that will emerge in this region. For this purpose, from 1972 to 2018, we calculated the ratio of dryland cotton lint yield per unit of annual rainfall at the county level. This ratio is called crop water productivity (CWP) and has units of mass per unit volume (g/m<sup>3</sup>). In our analysis, we used cotton lint yield data provided by the National Agricultural Statistics and rainfall data provided by the National Oceanic and Atmospheric Administration. Our results indicated that the three datasets used in our analysis, i.e., cotton lint yield, rainfall and CWP were all normally distributed. In this time period, 1972 to 2018, only one year 2011—a year with a record drought of 179 mm of rain failed to produce a dryland cotton crop in all the counties used in our analysis. The mean cotton lint yield ± standard deviation ranged from a high of 400 ± 175 kg/ha in Lubbock County to a low of 252 ± 144 kg/ha in Andrews County. However, the counties with the largest CWP > 90 g/m<sup>3</sup> were Glasscock, Midland and Martin County. The importance of this result is that these counties are in the southern region of the THP and are subject to extreme environmental conditions and yet cotton producers manage to produce a cotton crop in most years. We conclude that management production methods used by these dryland producers represent the future schemes that will need to be adopted in other counties to sustain the emerging dryland cropping systems across the THP.
文摘The measurement of crop transpiration (Tcrop</sub>) under field conditions and throughout the growing season is difficult to obtain. An available method uses stem flow gauge sensors, based on the conservation of energy and mass, where the calculated sap flow (F) is a direct measure of Tcrop</sub>. This method has been extensively tested on agronomic, horticultural, ornamental aspects and tree crops and the general consensus is that F is a measure of Tcrop</sub>. A new sap flow gauge (EXO-SkinTM</sup> Sap Flow) sensor, with different placement and number of thermocouples, compared to the original sensor, was introduced, resulting in a different energy balance equation to calculate F. Our objective was to compare values of Tcrop</sub> obtained with the new sensor on cotton (Gossypium hirsutum, L) plants to values measured with lysimeters. For this purpose, cotton plants were grown in 11-liter pots in a greenhouse experiment and hourly and daily values of Tcrop</sub> were compared for eight days. We used linear regression analysis to compare the hourly and daily values of Tcrop</sub> measured with the sensor to corresponding values measured with lysimeters on the same plant. Using a t-test (p > 0.05) we tested if the slope of the line was significantly different than 1 and if the intercept was significantly different than 0. This test indicated that there were no statistical differences between hourly and daily values of Tcrop</sub> measured with the new sensor and with the lysimeters. The main advantage of the new sensor is the flexibility of the new heater, allowing for better thermal contact between the plant stem and the temperature sensors. Further, the new sensor requires less wiring and copper connectors, and the number of channels used in a datalogger to record the output from the sensor is reduced by 25%. We conclude that the new sensor correctly measures Tcrop</sub> and that additional experiments with field grown plants are required to test the sensor at higher values of Tcrop</sub>.
文摘The Conservation Reserve Program (CRP) is a USDA program introduced in 1985 to reduce soil erosion by increasing vegetative cover of highly erodible land. Participation in the CRP is done via contracts (10 - 15 years in length) and currently the total area of land under contract is set to decline as per the 2014 Farm Bill. The Texas High Plains (THP) leads the US with >900,000 ha enrolled in CRP. A potential long- term benefit of CRP is to increase soil organic matter and to improve soil structure leading to increased water infiltration. Our objective was to evaluate the feasibility of using stable isotopes of water to measure and compare infiltration of rain in land under CRP management to land under continuous dryland cotton in the THP. For this purpose we selected two sites, with soils in the Amarillo series, enrolled in CRP, one for 25 years and the second site for 22 years. Results from several rain events showed that stable isotopes of water are a method that can be used to evaluate the depth of rainwater infiltration for soils under CRP and dryland management.
文摘Simulation models are tools that can be used to explore, for example, effects of cultural practices on soil erosion and irrigation on crop yield. However, often these models require many soil related input data of which the saturated hydraulic conductivity (Ks) is one of the most important ones. These data are usually not available and experimental determination is both expensive and time consuming. Therefore, pedotransfer functions are often used, which make use of simple and often readily available soil information to calculate required input values for models, such as soil hydraulic values. Our objective was to test the Rosetta pedotransfer function to calculate Ks. Research was conducted in a 64-ha field near Lamesa, Texas, USA. Field measurements of soil texture and bulk density, and laboratory measurements of soil water retention at field capacity (–33 kPa) and permanent wilting point (–1500 kPa), were taken to implement Rosetta. Calculated values of Ks were then compared to measured Ks on undisturbed soil samples. Results showed that Rosetta could be used to obtain values of Ks for a field with different textures. The Root Mean Square Difference (RMSD) of Ks at 0.15 m soil depth was 7.81 × 10–7 m·s–1. Further, for a given soil texture the variability, from 2.30 × 10–7 to 2.66 × 10–6 m·s-1, of measured Ks was larger than the corresponding RMSD. We conclude that Rosetta is a tool that can be used to calculate Ks in the absence of measured values, for this particular soil. Level H5 of Rosetta yielded the best results when using the measured input data and thus calculated values of Ks can be used as input in simulation models.
文摘The need to study the shrink-swell and crack properties of vertic soils has long been recognized given their dynamics in time and space, which modifies the physical properties that impact water and air movement in the soil, flow of water into the subsoil and ground water, and generally alter the hydrology of vertic soils. Measurement of crack properties has been made by numerous researchers with the purpose to understand and quantify the spatial and temporal dynamics of shrinking and swelling and the associated formation of cracks. These crack properties, which are important in modifying hydrology of soils are: width, length, depth and orientation of soil’s cracks. To better understand the hydrology of vertic soils and incorporate crack properties into hydrologic simulation models, several techniques have been developed to measure crack properties. However, little attention is given to evaluate both the advantages and the limitations associated with these techniques. Thus, the purpose of this review is to highlight challenges and limitations that have been used or might be used to measure cracking in vertic soils.
文摘Two sorghum lines, an erect leafed mutant sorghum and the wild type from which the mutant was generated, were field grown in rectilinear arrays at low (10 plants m-2) and high (23 plants m-2) population densities. Canopy light interception, biomass accretion and yield were measured. Photosynthetically active radiation under the canopy at ground level and midway through the canopy were higher in the erect leafed line, as compared to the normal leafed line. Planting density had less effect on mean grain yield and biomass in the erect leaf line than in the wild type. Though not conclusive, when taken together, the results suggested that optimal planting densities are higher for the erect leaf line and that the erect leaf trait could be useful for incorporation into breeding programs.
文摘Cotton irrigation in the Texas High Plains (THP) is often dictated by the well capacity and not by the water needs of the crop. The source of irrigation-water is the Ogallala aquifer and in many areas of the THP, the water table has declined to well capacities that deliver 1.3 to >7.6 mm/d. There is plenty of information on cotton responses to irrigation frequency and amount;however, information on when to terminate irrigation and its effect on cotton lint yield and fiber quality is scarce. Our objective was to evaluate over a 4-year period three irrigation termination thermal times corresponding to cumulative daily heat units (∑HU) of 890 °C, 1000 °C and 1110 °C from crop emergence, and three levels of irrigation (2.5, 5.1 and 7.6 mm/d) on cotton lint yield and fiber quality. Irrigation was applied with a sprinkler system on a 3-day frequency in Lubbock, TX. Results showed that on average the 7.6 mm/d level produced the most cotton lint yield regardless of the irrigation termination thermal time. Terminating cotton at 1000- °C ∑HU resulted in water savings of 25 to 50 mm for the 2.5 and 5.1 mm/d levels without significantly affecting lint yield. For the 7.6 mm/d and terminating at 890- °C ∑HU resulted in water savings of 100 to 115 mm. Average fiber length statistically increased with termination thermal time and level. This effect was most significant in years with the least rain and warmer air temperature. Micronaire increased with the termination thermal time in years with >500 mm of rain. Average fiber length uniformity and fiber strength were minimally affected by termination thermal time. As irrigation level increased, the average micronaire decreased, and fiber strength increased for the 5.1 and 7.6 mm/d irrigation. We concluded that in the THP for well capacities that deliver 2.5 - 5.1 mm/d irrigation can be terminated when the ∑HU reaches about 1000 °C from emergence without impacting cotton lint yield.
文摘Cotton (Gossypium hirsutum L.) is planted on more land area than any other crop on the Texas High Plains. Much of this area is considered highly erodible and requires a conservation compliance program to participate in government farm programs. Because this region is semiarid and because irrigation water is increasingly limited, water conservation and efficient use of water are necessary to maximize cotton lint yields. One popular conservation compliance practice used is to plant cotton into a chemically terminated small grain crop, i.e., residue that provides wind protection to the cotton seedlings. Our hypothesis was that in a semiarid region the use of a small grain cover crop under irrigated conditions would use more water than it conserves compared to conventional tilled cotton, thus reducing cotton lint yields. To test the hypothesis separate field studies over two growing seasons and on two soil textures, a loamy fine sand and a clay loam, were conducted. The main treatments were tillage systems (conventional and conservation using terminated wheat residue). The two split plot treatments were water supply based on replacement of calculated grass reference evapotranspiration (ETo). Tillage did not affect the amount of water used by the cotton crop at either location ( 0.05) except for an 80% ETo irrigation treatment at a single location where the bare soil treatment used 10% more water than the residue treatments for both years. The residue treatment decreased (P < 0.05) cotton lint yields at both locations by 12% except for the 50% ETo single irrigation treatment in which the residue treatment yielded 14% more lint than the bare soil treatment. The use of terminated wheat residue had no impact on soil water storage during any part of the year. During a 5-month period associated with wheat growth, the wheat evapotranspiration was 20 to 40 mm more water (P < 0.05) than that lost through soil water evaporation from the conventional treatments. The use of terminated wheat residue did not benefit the water balance of the cotton crop, and was associated with decreased cotton lint yields. The results were consistent with our working hypothesis, and disproved the idea that planting cotton into wheat stubble cover increases water use efficiency.
文摘In recent years, a significant number of environmental studies have been conducted in New Orleans, LA and surrounding Gulf Coast areas due in part to the occurrence of hurricanes Katrina and Rita. Data collected from studies in the New Orleans area indicate that inorganic contaminants including arsenic (As), iron (Fe), lead (Pb), and vanadium (V);high concentration of bioaerosols, particularly Cladosporium and Aspergillus, and several organic pollutants (PAHs, pesticides, and volatiles) may pose a risk to human health in New Orleans. While many of these results resemble historical data, a current quantitative exposure assessment has not been conducted. We engaged in one such assessment for lead (Pb) contamination in surface soils. We used Pb concentrations in surface soils ( μg/day to 102 μg/day for our study area within urbanNew Orleans. These data are concerning because children exposed to >33.5 μg/d Pb may cause their blood-Pb levels to exceed the Centers for Disease Control and Prevention (CDC) threshold for blood-Pb of 10 μg/dL. It has generally been accepted that a more protective blood Pb concentration threshold of 6 - μg/dL is warranted. Using the 6-μg/dL threshold puts children exposed to as little as 20.2 μg/day Pb at risk.
文摘A major limitation in the use of stable isotope of water in ecological studies is the time that is required to extract water from soil and plant samples. Using vacuum distillation the extraction time can be less than one hour per sample. Therefore, assembling a distillation system that can process multiple samples simultaneously is advantageous and necessary for ecological or hydrological investigations. Presented here is a vacuum distillation apparatus, having six ports, that can process up to 30 samples per day. The distillation system coupled with the Los Gatos Research DLT-100 Liquid Water Isotope Analyzer is capable of analyzing all of the samples that are generated by vacuum distillation. These two systems allow larger sampling rates making investigations into water movement through an ecological system possible at higher temporal and spatial resolution.
文摘An existing Purdue-type rainfall simulator (RFS) was designed to be transported using a commercial flatbed trailer that was modified by cutting out a section of the wooden bed allowing the RFS to be positioned directly above the target area to measure soil erosion and water runoff. To allow water to pass through the trailer undisturbed, the axle of the trailer was removed and replaced with axle-free wheel hubs and springs. Additionally, a remote control mover rated for 2000 kg was incorporated in our design. The final result was a portable and mobile RFS that can be moved to fields using a trailer hitch and can be operated by two individuals. The cost of the hardware, not including the RFS, is $5300 (USD) and detailed design plans are available.
文摘Herein we describe an approach to measure the volume and to characterize the volume distribution of large numbers of individual small regularly shaped seeds. The results of a preliminary investigation into the distribution of seed size of a multi-seeded sorghum mutant, as compared to the wild type from which it was developed are also reported, and are used as an example of the method’s utility.
文摘Acoustic emissions (AEs) from xylem cavitation events are characteristic of transpiration processes. Though a body of work exists describing AEs and limited stem hydraulic conductivity under water stress, there is limited information about the effects of AEs on stomatal aperture and limitation on carbon assimilation. The objective of this work was to relate AEs to drought stress in cotton. Cotton was grown in mini-lysimeters in the greenhouse and instrumented with a portable photosynthesis system and ultrasonic transducers connected to a digital signal-processing unit. Whole plant transpiration, leaf level gas exchange and ultrasonic AEs were measured. Xylem cavitation events temporally associated with the onset of drought stress. The results are consistent with stomatal closure in response to reduced hydraulic conductance from xylem cavitation events. Clear direct empirical evidence of a reduction in carbon assimilation associated with xylem cavitation resulting from water stress is presented.
文摘Multiseed (msd) mutant sorghum [Sorghum bicolor (L.) Moench] lines with greatly increased seed numbers were developed. It was originally thought that the msd trait could increase grain yield several times in comparison with the wild type from which the mutant was derived. However, in a small plot trial, msd seed yield decreased when compared to the parent line. Herein we report results that msd seed yield remained either unchanged or slightly increased in comparison to the parent line. We suggest that attempts to measure msd sorghum seed yield were complicated due to systematic errors associated with the post-harvest processing methods, including threshing and pneumatic winnowing equipment that was used for harvest. That is, seed recovery and seed loss from individual panicles were affected by the post-harvest processing. When evaluating sorghum grain yield of types with different seed sizes, threshing and seed cleaning harvesting methods should be optimized for each sorghum line.
文摘An allelic sorghum [Sorghum bicolor (L.) Moench] mutant with thick and narrow erect leaves (Thl) and reduced adaxial stomatal density was isolated from the Annotated Individually pedigreed Mutagenized Sorghum mutant library developed at the Plant Stress and Germplasm Development Unit at Lubbock TX. The mutant, Thl, was isolated from a pedigreed M3 family generated by ethyl methanesulfonate mutagenization from an elite inbred sorghum line, BTx623, which had been used to sequence the sorghum genome. The mutant has been backcrossed to the wild-type BTx623 confirming that the trait results derive from a stable recessive nuclear gene mutation. Herein, we briefly described morphological and selected physiological characteristics of this mutant sorghum.
文摘Bird damage is a problem in sorghum breeding and germplasm maintenance operations. Paper pollination bags are damaged by rain and provide minimal deterrent to birds. Earlier we reported upon bird resistance of spun polyethylene pollination bags. Herein, we report the potential for pollen transmission through, and the microenvironment within, hard form (HfT) and soft form (SfT) spun polyethylene pollination bags as compared to traditional Paper pollination bags. Within Paper pollination bags morning temperatures were 10°C - 15°C above ambient and high temperature excursions as high as 45°C were measured. Heating in Sft and HfT was 25% and 50% that of Paper, respectively. Temperature differences between bags were attributed to differences in albedo and air permeability of the bag materials. No difference in pollen transmission through Paper and HfT was found. Although SfT allowed 35% - 40% wind borne pollen through the pores as compared to controls, male sterile plants covered with SfT produced only 30 seeds/panicle, about 1% of a self-pollinating fertile plant. Our results suggested that SfT could adequately reduce or eliminate cross-pollination in self-pollinating plants while maintaining near ambient environmental conditions.
