A method of quantification of perfluorinated compounds(PFCs)from atmospheric particulate matter(APM)is described.A single step pretreatment method,selective pressurized liquid extraction(SPLE),was developed to reduce ...A method of quantification of perfluorinated compounds(PFCs)from atmospheric particulate matter(APM)is described.A single step pretreatment method,selective pressurized liquid extraction(SPLE),was developed to reduce the high matrix background and avoid contamination from commonly used multiple sample pretreatment steps.An effective sorbent was selected to purify the PFCs during SPLE,followed by liquid chromatography-tandem mass spectrometry(LC–MS/MS),for quantification of PFCs.Conditions affecting the SPLE efficiency,including temperature,static extraction time,and number of extraction cycles used,were studied.The optimum conditions were found to be 120℃,10 min,and 3 cycles,respectively.LC-MS/MS method was developed to obtain the optimal sensitivity specific to PFCs.The method detection limits(MDLs)were 0.006 to 0.48 ng/g for the PFCs studied and the linear response range was from 0.1 to 100 ng/g.To ensure accurate values were obtained,each step of the experiment was evaluated and controlled to prevent contamination.The optimized method was tested by performing spiking experiments in natural particulate matter matrices and good rates of recovery and reproducibility were obtained for all target compounds.Finally,the method was successfully used to measure 16 PFCs in the APM samples collected in Beijing over five years from 2015 to 2019.It is observed that some PFCs follow the trend of total PFC changes,and can be attributed to the environment influencing events and policy enforcement,while others don't seem to change as much with time of the year or from year to year.展开更多
基金supported by the NQI Project of National key R&D Program of China (No.2016YFF0201102)the project for the“Development of analytical method and certified reference materials for tracing air pollutant source” (No.21AKY1514)from the National Institute of Metrology,Beijing,China。
文摘A method of quantification of perfluorinated compounds(PFCs)from atmospheric particulate matter(APM)is described.A single step pretreatment method,selective pressurized liquid extraction(SPLE),was developed to reduce the high matrix background and avoid contamination from commonly used multiple sample pretreatment steps.An effective sorbent was selected to purify the PFCs during SPLE,followed by liquid chromatography-tandem mass spectrometry(LC–MS/MS),for quantification of PFCs.Conditions affecting the SPLE efficiency,including temperature,static extraction time,and number of extraction cycles used,were studied.The optimum conditions were found to be 120℃,10 min,and 3 cycles,respectively.LC-MS/MS method was developed to obtain the optimal sensitivity specific to PFCs.The method detection limits(MDLs)were 0.006 to 0.48 ng/g for the PFCs studied and the linear response range was from 0.1 to 100 ng/g.To ensure accurate values were obtained,each step of the experiment was evaluated and controlled to prevent contamination.The optimized method was tested by performing spiking experiments in natural particulate matter matrices and good rates of recovery and reproducibility were obtained for all target compounds.Finally,the method was successfully used to measure 16 PFCs in the APM samples collected in Beijing over five years from 2015 to 2019.It is observed that some PFCs follow the trend of total PFC changes,and can be attributed to the environment influencing events and policy enforcement,while others don't seem to change as much with time of the year or from year to year.
