The proper recycling of spent lithium-ion batteries(LIBs)can promote the recovery and utilization of valuable resources,while also negative environmental effects resulting from the presence of toxic and hazardous subs...The proper recycling of spent lithium-ion batteries(LIBs)can promote the recovery and utilization of valuable resources,while also negative environmental effects resulting from the presence of toxic and hazardous substances.In this study,a new environmentally friendly hydro-metallurgical process was proposed for leaching lithium(Li),nickel(Ni),cobalt(Co),and manganese(Mn)from spent LIBs using sulfuric acid with citric acid as a reductant.The effects of the concentration of sulfuric acid,the leaching temperature,the leaching time,the solid-liquid ratio,and the reducing agent dosage on the leaching behavior of the above elements were investigated.Key parameters were optimized using response surface methodology(RSM)to maximize the recovery of metals from spent LIBs.The maxim-um recovery efficiencies of Li,Ni,Co,and Mn can reach 99.08%,98.76%,98.33%,and 97.63%.under the optimized conditions(the sulfuric acid concentration was 1.16 mol/L,the citric acid dosage was 15wt%,the solid-liquid ratio was 40 g/L,and the temperature was 83℃ for 120 min),respectively.It was found that in the collaborative leaching process of sulfuric acid and citric acid,the citric acid initially provided strong reducing CO_(2)^(-),and the transition metal ions in the high state underwent a reduction reaction to produce transition metal ions in the low state.Additionally,citric acid can also act as a proton donor and chelate with lower-priced transition metal ions,thus speeding up the dissolution process.展开更多
Using ethylene glycol monovinyl polyoxyethylene ether,2-acrylamido-2-methylpropane sulfonic acid(AMPS)and acrylic acid as the main synthetic monomers,a high robustness polycarboxylate superplasticizer was prepared.The...Using ethylene glycol monovinyl polyoxyethylene ether,2-acrylamido-2-methylpropane sulfonic acid(AMPS)and acrylic acid as the main synthetic monomers,a high robustness polycarboxylate superplasticizer was prepared.The effects of initial temperature,ratio of acid to ether,amount of chain transfer agent,and synthesis process on the properties of the superplasticizer were studied.The molecular structure was characterized by GPC(Gel Permeation Chromatography)and IR(Infrared Spectrometer).As shown by the results,when the initial reaction temperature is 15℃,the ratio of acid to ether is 3.4:1 and the acrylic acid pre-neutralization is 15%,The AMPS substitution is 10%,the amount of chain transfer agent is 8%,and the performance of the synthesized superplasticizer is the best.Compared with commercially available ordinary polycarboxylate superplasticizer in C30 concrete prepared with manufactured sand and fly ash,the bleeding rate decreases by 52%,T50 decreases by 1.2 s,and the slump time decreases by 1.1 s.In C60 concrete prepared with fly ash and river sand,the bleeding rate decreases by 46%,T50 decreases by 0.8 s,and the slump time decreases by 3.2 s.展开更多
The effect and mechanism of ultrasound and CaF_(2) on vanadium leaching from vanadium-bearing shale were investigated systematically.In consideration of the enhancement for vanadium recovery,the combination of ultraso...The effect and mechanism of ultrasound and CaF_(2) on vanadium leaching from vanadium-bearing shale were investigated systematically.In consideration of the enhancement for vanadium recovery,the combination of ultrasound and CaF_(2)(66.28%) exerts more evident effects than ultrasound(26.97%) and CaF_(2)(60.35%) alone,demonstrating the synergetic effect of ultrasound and CaF_(2).Kinetic analysis manifests that the product layer diffusion controls vanadium leaching in ultrasound system without CaF_(2),however product layer diffusion and interfacial reaction is the rate-controlling step for vanadium leaching in other three leaching systems.The combination of ultrasound and CaF_(2) notably decreases the activation energy(E_(a)) from 62.03 to 27.61 kJ/mol,nevertheless individual CaF_(2) only reduces the E_(a) to 50.70 kj/mol.X-ray diffraction and fourier transform infrared spectrometer analyses show that the decomposition degree of the vanadium-bearing mica structure is the most significant in ultrasound and CaF_(2) system,proving the highest release degree of vanadium.Specific surface area and pore distribution combined with scanning electron microscope analyses reveal that the action of ultrasound and CaF_(2) would provide higher specific surface area,more abundant pores structure and cracks for the particles,which further prompts the rapid diffusion of H^(+),F^(-)and HF,and achieves the conspicuous improvement of vanadium leaching recovery.展开更多
The aim of this investigation was to prepare geopolymeric precursor from vanadium tailing(VT)by thermal activation and modification.For activation,a homogeneous blend of VT and sodium hydroxide was calcinated at an el...The aim of this investigation was to prepare geopolymeric precursor from vanadium tailing(VT)by thermal activation and modification.For activation,a homogeneous blend of VT and sodium hydroxide was calcinated at an elevated temperature and then modified with metakaolin to produce a geopolymeric precursor.During the thermal activation,the VT was corroded by sodium hydroxide and then sodium silicate formed on the particle surfaces.After water was added,the sodium silicate coating dissolved to release silicon species,which created an alkaline solution environment.The metakaolin then dissolved in the alkaline environment to generate aluminum species,which was followed by geopolymerization.The VT particles were connected by a gel produced during geopolymerization,which yielded a geopolymer with excellent mechanical performance.This investigation not only improves the feasibility of using geopolymer technology for large-scale and in-situ applications,but also promotes the utilization of VT and other silica-rich solid wastes.展开更多
基金supported by Key R&D Program of Zhejiang Province,China (No.2022C03061)the National Natural Science Foundation of China (No.52074204)the Fundamental Research Funds for the Central Universities (No.2023-vb-032).
文摘The proper recycling of spent lithium-ion batteries(LIBs)can promote the recovery and utilization of valuable resources,while also negative environmental effects resulting from the presence of toxic and hazardous substances.In this study,a new environmentally friendly hydro-metallurgical process was proposed for leaching lithium(Li),nickel(Ni),cobalt(Co),and manganese(Mn)from spent LIBs using sulfuric acid with citric acid as a reductant.The effects of the concentration of sulfuric acid,the leaching temperature,the leaching time,the solid-liquid ratio,and the reducing agent dosage on the leaching behavior of the above elements were investigated.Key parameters were optimized using response surface methodology(RSM)to maximize the recovery of metals from spent LIBs.The maxim-um recovery efficiencies of Li,Ni,Co,and Mn can reach 99.08%,98.76%,98.33%,and 97.63%.under the optimized conditions(the sulfuric acid concentration was 1.16 mol/L,the citric acid dosage was 15wt%,the solid-liquid ratio was 40 g/L,and the temperature was 83℃ for 120 min),respectively.It was found that in the collaborative leaching process of sulfuric acid and citric acid,the citric acid initially provided strong reducing CO_(2)^(-),and the transition metal ions in the high state underwent a reduction reaction to produce transition metal ions in the low state.Additionally,citric acid can also act as a proton donor and chelate with lower-priced transition metal ions,thus speeding up the dissolution process.
基金the Scientific Research Foundation of Hubei University of Technology(GCRC2020012).
文摘Using ethylene glycol monovinyl polyoxyethylene ether,2-acrylamido-2-methylpropane sulfonic acid(AMPS)and acrylic acid as the main synthetic monomers,a high robustness polycarboxylate superplasticizer was prepared.The effects of initial temperature,ratio of acid to ether,amount of chain transfer agent,and synthesis process on the properties of the superplasticizer were studied.The molecular structure was characterized by GPC(Gel Permeation Chromatography)and IR(Infrared Spectrometer).As shown by the results,when the initial reaction temperature is 15℃,the ratio of acid to ether is 3.4:1 and the acrylic acid pre-neutralization is 15%,The AMPS substitution is 10%,the amount of chain transfer agent is 8%,and the performance of the synthesized superplasticizer is the best.Compared with commercially available ordinary polycarboxylate superplasticizer in C30 concrete prepared with manufactured sand and fly ash,the bleeding rate decreases by 52%,T50 decreases by 1.2 s,and the slump time decreases by 1.1 s.In C60 concrete prepared with fly ash and river sand,the bleeding rate decreases by 46%,T50 decreases by 0.8 s,and the slump time decreases by 3.2 s.
基金supported by the National Natural Science Foundation of China (51874222 and 52074204)the Fundamental Research Funds for the Central Universities (No. 2020-YB029)。
文摘The effect and mechanism of ultrasound and CaF_(2) on vanadium leaching from vanadium-bearing shale were investigated systematically.In consideration of the enhancement for vanadium recovery,the combination of ultrasound and CaF_(2)(66.28%) exerts more evident effects than ultrasound(26.97%) and CaF_(2)(60.35%) alone,demonstrating the synergetic effect of ultrasound and CaF_(2).Kinetic analysis manifests that the product layer diffusion controls vanadium leaching in ultrasound system without CaF_(2),however product layer diffusion and interfacial reaction is the rate-controlling step for vanadium leaching in other three leaching systems.The combination of ultrasound and CaF_(2) notably decreases the activation energy(E_(a)) from 62.03 to 27.61 kJ/mol,nevertheless individual CaF_(2) only reduces the E_(a) to 50.70 kj/mol.X-ray diffraction and fourier transform infrared spectrometer analyses show that the decomposition degree of the vanadium-bearing mica structure is the most significant in ultrasound and CaF_(2) system,proving the highest release degree of vanadium.Specific surface area and pore distribution combined with scanning electron microscope analyses reveal that the action of ultrasound and CaF_(2) would provide higher specific surface area,more abundant pores structure and cracks for the particles,which further prompts the rapid diffusion of H^(+),F^(-)and HF,and achieves the conspicuous improvement of vanadium leaching recovery.
基金This work was financially supported by the Major Tech-nical Innovation Project of Hubei Province,China(No.2018ACA157)the National Natural Science Foundation of China(No.51874222)the Excellent Dissertation Cul-tivation Funds of Wuhan University of Technology(No.2018-YS-052).
文摘The aim of this investigation was to prepare geopolymeric precursor from vanadium tailing(VT)by thermal activation and modification.For activation,a homogeneous blend of VT and sodium hydroxide was calcinated at an elevated temperature and then modified with metakaolin to produce a geopolymeric precursor.During the thermal activation,the VT was corroded by sodium hydroxide and then sodium silicate formed on the particle surfaces.After water was added,the sodium silicate coating dissolved to release silicon species,which created an alkaline solution environment.The metakaolin then dissolved in the alkaline environment to generate aluminum species,which was followed by geopolymerization.The VT particles were connected by a gel produced during geopolymerization,which yielded a geopolymer with excellent mechanical performance.This investigation not only improves the feasibility of using geopolymer technology for large-scale and in-situ applications,but also promotes the utilization of VT and other silica-rich solid wastes.
