In this paper,the penetration mechanism of reactive jet with non-uniform density distribution is studied.The simulations show that the density deficit occurs in the whole reactive jet,and the density increases from th...In this paper,the penetration mechanism of reactive jet with non-uniform density distribution is studied.The simulations show that the density deficit occurs in the whole reactive jet,and the density increases from the jet tip to tail.The density of jet tip is approximately 1.5 g/cm3,which is lower than that of the reactive liner materials.The X-ray experiments show similar results with the simulations.The density decreasing effect of jet tip has a significant influence on the penetration behavior when the reactive jet impacts steel plate.According to the simulation results,this paper assumes that the density gradient in the jet section has linear distribution.Then,the deflagration pressure generated by each jet element at the bottom of crater is introduced into the Bernoulli equation.Based on the virtual origin model and Szendrei-Held equation,the analytical models for penetration depth and radial cratering of reactive jet with the density reduction are obtained.Moreover,to further prove the validity of analytical models,the penetration experiments of the reactive liner shaped charge against steel plate under different standoffs are carried out.There is a convergence between the analytical crater profiles and experimental results when reactive jets penetrate steel plates under different standoffs,especially at standoff of 1.5 and 2.0charge diameters.展开更多
In this paper, the reaction characteristic and its application in shaped charge warhead of a novel reactive material, which introduced copper(Cu) and plumbum(Pb) into traditional polytetrafluoroethylene/aluminum(PTFE/...In this paper, the reaction characteristic and its application in shaped charge warhead of a novel reactive material, which introduced copper(Cu) and plumbum(Pb) into traditional polytetrafluoroethylene/aluminum(PTFE/Al), are studied. The thermal analysis and chemical reaction behavior of the PTFE/Al/Cu/Pb mixture are investigated by Differential Scanning Calorimetry(DSC),Thermo-gravimetry(TG), and Xray Diffraction(XRD) techniques. Then, the shaped charge liners with PTFE/Al/Cu/Pb reactive materials are fabricated, and the X-ray experiments show that they could form reactive jets with excellent performance under the detonation effects of the shaped charge. Based on that, the penetration experiments of shaped charge with PTFE/Al/Cu/Pb reactive liner against steel plates are carried out, and the results demonstrate that the PTFE/Al/Cu/Pb reactive jets could produce a deeper penetration depth compared to the traditional PTFE/Al reactive jets. Meanwhile, the PTFE/Al/Cu/Pb reactive jets also show significant inner-blast effects, leading to dramatically cracking or fragmentation behavior of the penetrated steel plates. This new PTFE/Al/Cu/Pb reactive liner shaped charge presents enhanced penetration behavior for steel targets that incorporates the penetration capability of a high-density and ductility jet, and the chemical energy release of PTFE-matrix reactive materials.展开更多
In this paper,the ballistic impact experiments,including impact test chamber and impact double-spaced plates,were conducted to study the reaction behaviors of a novel functionally graded reactive material(FGRM),which ...In this paper,the ballistic impact experiments,including impact test chamber and impact double-spaced plates,were conducted to study the reaction behaviors of a novel functionally graded reactive material(FGRM),which was composed of polytetrafluoroethylene/aluminum(PTFE/Al)and PTFE/Al/bismuth trioxide(Bi_(2)O_(3)).The experiments showed that the impact direction of the FGRM had a significant effect on the reaction.With the same impact velocity,when the first impact material was PTFE/Al/Bi_(2)O_(3),compared with first impact material PTFE/Al,the FGRM induced higher overpressure in the test chamber and larger damaged area of double-spaced plates.The theoretical model,which considered the shock wave generation and propagation,the effect of the shock wave on reaction efficiency,and penetration behaviors,was developed to analyze the reaction behaviors of the FGRM.The model predicted first impact material of the FGRM with a higher shock impedance was conducive to the reaction of reactive materials.The conclusion of this study provides significant information about the design and application of reactive materials.展开更多
基金supported by the National Natural Science Foundation of China(No.12002046)the China Postdoctoral Science Foundation(No.2020M680392)。
文摘In this paper,the penetration mechanism of reactive jet with non-uniform density distribution is studied.The simulations show that the density deficit occurs in the whole reactive jet,and the density increases from the jet tip to tail.The density of jet tip is approximately 1.5 g/cm3,which is lower than that of the reactive liner materials.The X-ray experiments show similar results with the simulations.The density decreasing effect of jet tip has a significant influence on the penetration behavior when the reactive jet impacts steel plate.According to the simulation results,this paper assumes that the density gradient in the jet section has linear distribution.Then,the deflagration pressure generated by each jet element at the bottom of crater is introduced into the Bernoulli equation.Based on the virtual origin model and Szendrei-Held equation,the analytical models for penetration depth and radial cratering of reactive jet with the density reduction are obtained.Moreover,to further prove the validity of analytical models,the penetration experiments of the reactive liner shaped charge against steel plate under different standoffs are carried out.There is a convergence between the analytical crater profiles and experimental results when reactive jets penetrate steel plates under different standoffs,especially at standoff of 1.5 and 2.0charge diameters.
基金funded under the National Natural Science Foundation of China (No. 12002046)the study was also supported by the State Key Laboratory of Explosion Science and Technology of China。
文摘In this paper, the reaction characteristic and its application in shaped charge warhead of a novel reactive material, which introduced copper(Cu) and plumbum(Pb) into traditional polytetrafluoroethylene/aluminum(PTFE/Al), are studied. The thermal analysis and chemical reaction behavior of the PTFE/Al/Cu/Pb mixture are investigated by Differential Scanning Calorimetry(DSC),Thermo-gravimetry(TG), and Xray Diffraction(XRD) techniques. Then, the shaped charge liners with PTFE/Al/Cu/Pb reactive materials are fabricated, and the X-ray experiments show that they could form reactive jets with excellent performance under the detonation effects of the shaped charge. Based on that, the penetration experiments of shaped charge with PTFE/Al/Cu/Pb reactive liner against steel plates are carried out, and the results demonstrate that the PTFE/Al/Cu/Pb reactive jets could produce a deeper penetration depth compared to the traditional PTFE/Al reactive jets. Meanwhile, the PTFE/Al/Cu/Pb reactive jets also show significant inner-blast effects, leading to dramatically cracking or fragmentation behavior of the penetrated steel plates. This new PTFE/Al/Cu/Pb reactive liner shaped charge presents enhanced penetration behavior for steel targets that incorporates the penetration capability of a high-density and ductility jet, and the chemical energy release of PTFE-matrix reactive materials.
基金National Natural Science Foundation of China[grant number U1730112],China.
文摘In this paper,the ballistic impact experiments,including impact test chamber and impact double-spaced plates,were conducted to study the reaction behaviors of a novel functionally graded reactive material(FGRM),which was composed of polytetrafluoroethylene/aluminum(PTFE/Al)and PTFE/Al/bismuth trioxide(Bi_(2)O_(3)).The experiments showed that the impact direction of the FGRM had a significant effect on the reaction.With the same impact velocity,when the first impact material was PTFE/Al/Bi_(2)O_(3),compared with first impact material PTFE/Al,the FGRM induced higher overpressure in the test chamber and larger damaged area of double-spaced plates.The theoretical model,which considered the shock wave generation and propagation,the effect of the shock wave on reaction efficiency,and penetration behaviors,was developed to analyze the reaction behaviors of the FGRM.The model predicted first impact material of the FGRM with a higher shock impedance was conducive to the reaction of reactive materials.The conclusion of this study provides significant information about the design and application of reactive materials.
