The miscibility of flue gas and different types of light oils is investigated through slender-tube miscible displacement experiment at high temperature and high pressure.Under the conditions of high temperature and hi...The miscibility of flue gas and different types of light oils is investigated through slender-tube miscible displacement experiment at high temperature and high pressure.Under the conditions of high temperature and high pressure,the miscible displacement of flue gas and light oil is possible.At the same temperature,there is a linear relationship between oil displacement efficiency and pressure.At the same pressure,the oil displacement efficiency increases gently and then rapidly to more than 90% to achieve miscible displacement with the increase of temperature.The rapid increase of oil displacement efficiency is closely related to the process that the light components of oil transit in phase state due to distillation with the rise of temperature.Moreover,at the same pressure,the lighter the oil,the lower the minimum miscibility temperature between flue gas and oil,which allows easier miscibility and ultimately better performance of thermal miscible flooding by air injection.The miscibility between flue gas and light oil at high temperature and high pressure is more typically characterized by phase transition at high temperature in supercritical state,and it is different from the contact extraction miscibility of CO_(2) under conventional high pressure conditions.展开更多
Physical modeling,numerical simulation and field case analysis were carried out to find out the subsurface thermal oxidation state,thermal oxidation front characteristics and production dynamic characteristics of high...Physical modeling,numerical simulation and field case analysis were carried out to find out the subsurface thermal oxidation state,thermal oxidation front characteristics and production dynamic characteristics of high pressure air injection thermal oxidation miscible flooding technology.The lighter the composition and the lower the viscosity of the crude oil,the lower the fuel consumption and the combustion temperature are.The thermal oxidation front of light oil and volatile oil can advance stably,and a medium-temperature thermal oxidation stable displacement state can be formed in the light oil reservoir under high pressure conditions.With strong thermal gasification and distillation,light oil and volatile oil are likely to form a single phase zone of gasification and distillation with thermal flue gas at the high-temperature and high-pressure heat front,finally,an air-injection thermal miscible front.In light oil reservoirs,the development process of high-pressure air-injection thermal miscible flooding can be divided into three stages:boosting pressure stage,low gas-oil ratio and high-efficiency stable production stage and high gas-oil ratio production stage.Approximately 70%of crude oil is produced during the boosting pressure stage and low gas-oil ratio high-efficiency and stable production stage.展开更多
Based on the analysis of the production composition of reservoirs developed by the second&tertiary recovery combination(STRC),the relationship between the overall output of the STRC project and the production leve...Based on the analysis of the production composition of reservoirs developed by the second&tertiary recovery combination(STRC),the relationship between the overall output of the STRC project and the production level during the blank water flooding stage is proposed.According to the basic principle of reservoir engineering that the“recovery factor is equal to sweeping coefficient multiplied by oil displacement efficiency”,the formula for calculating the ultimate oil recovery factor of chemical combination flooding reservoir was established.By dividing the reservoir into a series of grids according to differen-tial calculus thinking,the relationship between the ultimate recovery factor of a certain number of grids and the recovery de-gree of the reservoir was established,and then the variation law of oil production rate of the STRC reservoir was obtained.The concept of“oil rate enlargement factor of chemical combination flooding”was defined,and a production calculation method of reservoir developed by STRC was put forward based on practical oilfield development experience.The study shows that the oil production enhancing effect of STRC increases evenly with the in crease of the ratio of STRC displacement efficiency to water displacement efficiency,and increases rapidly with the increase of the ratio of recovery degree at flooding mode conversion to the water displacement efficiency.STRC is more effective in increasing oil production of reservoir with high recovery degree.Through practical tests of the alkali free binary flooding(polymer/surfactant)projects,the relative error of the oil production calculation method of STRC reservoir is about±10%,which meets the requirements of reservoir engineering.展开更多
To improve the oil recovery and economic efficiency in heavy oil reservoirs in late steam flooding,taking J6 Block of Xinjiang Oilfield as the research object,3D physical modeling experiments of steam flooding,CO2-foa...To improve the oil recovery and economic efficiency in heavy oil reservoirs in late steam flooding,taking J6 Block of Xinjiang Oilfield as the research object,3D physical modeling experiments of steam flooding,CO2-foam assisted steam flooding,and CO2 assisted steam flooding under different perforation conditions are conducted,and CO2-assisted steam flooding is proposed for reservoirs in the late stage of steam flooding.The experimental results show that after adjusting the perforation in late steam flooding,the CO2 assisted steam flooding formed a lateral expansion of the steam chamber in the middle and lower parts of the injection well and a development mode for the production of overriding gravity oil drainage in the top chamber of the production well;high temperature water,oil,and CO2 formed stable low-viscosity quasi-single-phase emulsified fluid;and CO2 acted as a thermal insulation in the steam chamber at the top,reduced the steam partial pressure inside the steam chamber,and effectively improved the heat efficiency of injected steam.Based on the three-dimensional physical experiments and the developed situation of the J6 block in Xinjiang Oilfield,the CO2 assisted steam flooding for the J6 block was designed.The application showed that the CO2 assisted steam flooding made the oil vapor ratio increase from 0.12 to 0.16 by 34.0%,the oil recovery increase from 16.1%to 21.5%,and the final oil recovery goes up to 66.5%compared to steam flooding after perforation adjustment.展开更多
The oil oxidation characteristics of the whole temperature regions from 30 ℃ to 600 ℃ during oil reservoir air injection were revealed by experiments. The whole oil oxidation temperature regions were divided into fo...The oil oxidation characteristics of the whole temperature regions from 30 ℃ to 600 ℃ during oil reservoir air injection were revealed by experiments. The whole oil oxidation temperature regions were divided into four different parts: dissolving and inflation region, low temperature oxidation region, medium temperature oxidation region and high temperature oxidation region. The reaction mechanisms of different regions were explained. Based on the oil oxidation characteristics and filed tests results, light oil reservoirs air injection development methods were divided into two types: oxygen-reducing air flooding and air flooding;heavy oil reservoirs air injection in-situ combustion development methods were divided into two types: medium temperature in-situ combustion and high temperature in-situ combustion. When the reservoir temperature is lower than 120 ℃, oxygen-reducing air flooding should be used for light oil reservoir development. When the reservoir temperature is higher than 120 ℃, air flooding method should be used for light oil reservoir development. For a normal heavy oil reservoir, when the combustion front temperature is lower than 400 ℃, the development method is medium temperature in-situ combustion. For a heavy oil reservoir with high oil resin and asphalting contents, when the combustion front temperature is higher than 450 ℃, the development method at this condition is high temperature in-situ combustion. Ten years field tests of air injection carried out by PetroChina proved that air has advantages in technical, economical and gas source aspects compared with other gas agents for oilfield gas injection development. Air injection development can be used in low/super-low permeability light oil reservoirs, medium and high permeability light oil reservoirs and heavy oil reservoirs. Air is a very promising gas flooding agent.展开更多
本研究旨在利用质谱技术鉴定野血牦牛与家养牦牛血清中化学衍生物的差异,以明确长期受到高原生态环境自然选择下,野血牦牛更优环境适应性的代谢机制。本研究利用串联质谱技术对西藏阿里改则县的5头野血牦牛和5头家养牦牛的血清进行代谢...本研究旨在利用质谱技术鉴定野血牦牛与家养牦牛血清中化学衍生物的差异,以明确长期受到高原生态环境自然选择下,野血牦牛更优环境适应性的代谢机制。本研究利用串联质谱技术对西藏阿里改则县的5头野血牦牛和5头家养牦牛的血清进行代谢组功能分析,共鉴定到574个代谢相关化学衍生物质,其中比例最高的是有机酸及其衍生物和氨基酸及其衍生物,21种代谢物质差异显著,较家养牦牛,野血牦牛有7类化学代谢物(邻甲氧基苯甲酸、9,12-十八碳二烯酸、3,4,5-三甲氧基肉桂酸等)显著上调,14类化学代谢物(前列腺素E2、氧化三甲胺、羟基二十碳五烯酸等)显著下调。其中7类化学衍生物(5-羟基吲哚-3-乙酸、鸟苷、尿素、前列腺素E2、皮质醇、5-甲氧基色胺、3-甲基吲哚)富集于31个KEGG信号通路,包括组织系统(Organismal Sysyems)、代谢(Metabolism)、人类疾病(Human Disease)、环境信息过程(Environmental Information Processing)。本研究通过代谢组比较分析,进一步明确了野血牦牛优异的环境适应性代谢基础,同时鉴定到野血牦牛中富含一系列(鸟苷、5-甲基-2-脱氧饱苷、邻甲基苯甲酸等)已明确与心脑血管疾病相关药的化学衍生物,为今后开发抗高原病相关药物开发提供借鉴参考。展开更多
基金Supported by the PetroChina Science and Technology Project(2023ZG18).
文摘The miscibility of flue gas and different types of light oils is investigated through slender-tube miscible displacement experiment at high temperature and high pressure.Under the conditions of high temperature and high pressure,the miscible displacement of flue gas and light oil is possible.At the same temperature,there is a linear relationship between oil displacement efficiency and pressure.At the same pressure,the oil displacement efficiency increases gently and then rapidly to more than 90% to achieve miscible displacement with the increase of temperature.The rapid increase of oil displacement efficiency is closely related to the process that the light components of oil transit in phase state due to distillation with the rise of temperature.Moreover,at the same pressure,the lighter the oil,the lower the minimum miscibility temperature between flue gas and oil,which allows easier miscibility and ultimately better performance of thermal miscible flooding by air injection.The miscibility between flue gas and light oil at high temperature and high pressure is more typically characterized by phase transition at high temperature in supercritical state,and it is different from the contact extraction miscibility of CO_(2) under conventional high pressure conditions.
基金Supported by the Science and Technology Project of PetroChina Exploration and Production Company.
文摘Physical modeling,numerical simulation and field case analysis were carried out to find out the subsurface thermal oxidation state,thermal oxidation front characteristics and production dynamic characteristics of high pressure air injection thermal oxidation miscible flooding technology.The lighter the composition and the lower the viscosity of the crude oil,the lower the fuel consumption and the combustion temperature are.The thermal oxidation front of light oil and volatile oil can advance stably,and a medium-temperature thermal oxidation stable displacement state can be formed in the light oil reservoir under high pressure conditions.With strong thermal gasification and distillation,light oil and volatile oil are likely to form a single phase zone of gasification and distillation with thermal flue gas at the high-temperature and high-pressure heat front,finally,an air-injection thermal miscible front.In light oil reservoirs,the development process of high-pressure air-injection thermal miscible flooding can be divided into three stages:boosting pressure stage,low gas-oil ratio and high-efficiency stable production stage and high gas-oil ratio production stage.Approximately 70%of crude oil is produced during the boosting pressure stage and low gas-oil ratio high-efficiency and stable production stage.
基金Supported by the National Science and Technology Major Project of China (2016ZX05010).
文摘Based on the analysis of the production composition of reservoirs developed by the second&tertiary recovery combination(STRC),the relationship between the overall output of the STRC project and the production level during the blank water flooding stage is proposed.According to the basic principle of reservoir engineering that the“recovery factor is equal to sweeping coefficient multiplied by oil displacement efficiency”,the formula for calculating the ultimate oil recovery factor of chemical combination flooding reservoir was established.By dividing the reservoir into a series of grids according to differen-tial calculus thinking,the relationship between the ultimate recovery factor of a certain number of grids and the recovery de-gree of the reservoir was established,and then the variation law of oil production rate of the STRC reservoir was obtained.The concept of“oil rate enlargement factor of chemical combination flooding”was defined,and a production calculation method of reservoir developed by STRC was put forward based on practical oilfield development experience.The study shows that the oil production enhancing effect of STRC increases evenly with the in crease of the ratio of STRC displacement efficiency to water displacement efficiency,and increases rapidly with the increase of the ratio of recovery degree at flooding mode conversion to the water displacement efficiency.STRC is more effective in increasing oil production of reservoir with high recovery degree.Through practical tests of the alkali free binary flooding(polymer/surfactant)projects,the relative error of the oil production calculation method of STRC reservoir is about±10%,which meets the requirements of reservoir engineering.
基金Supported by the China National Science and Technology Major Project(2016ZX05012-002).
文摘To improve the oil recovery and economic efficiency in heavy oil reservoirs in late steam flooding,taking J6 Block of Xinjiang Oilfield as the research object,3D physical modeling experiments of steam flooding,CO2-foam assisted steam flooding,and CO2 assisted steam flooding under different perforation conditions are conducted,and CO2-assisted steam flooding is proposed for reservoirs in the late stage of steam flooding.The experimental results show that after adjusting the perforation in late steam flooding,the CO2 assisted steam flooding formed a lateral expansion of the steam chamber in the middle and lower parts of the injection well and a development mode for the production of overriding gravity oil drainage in the top chamber of the production well;high temperature water,oil,and CO2 formed stable low-viscosity quasi-single-phase emulsified fluid;and CO2 acted as a thermal insulation in the steam chamber at the top,reduced the steam partial pressure inside the steam chamber,and effectively improved the heat efficiency of injected steam.Based on the three-dimensional physical experiments and the developed situation of the J6 block in Xinjiang Oilfield,the CO2 assisted steam flooding for the J6 block was designed.The application showed that the CO2 assisted steam flooding made the oil vapor ratio increase from 0.12 to 0.16 by 34.0%,the oil recovery increase from 16.1%to 21.5%,and the final oil recovery goes up to 66.5%compared to steam flooding after perforation adjustment.
文摘The oil oxidation characteristics of the whole temperature regions from 30 ℃ to 600 ℃ during oil reservoir air injection were revealed by experiments. The whole oil oxidation temperature regions were divided into four different parts: dissolving and inflation region, low temperature oxidation region, medium temperature oxidation region and high temperature oxidation region. The reaction mechanisms of different regions were explained. Based on the oil oxidation characteristics and filed tests results, light oil reservoirs air injection development methods were divided into two types: oxygen-reducing air flooding and air flooding;heavy oil reservoirs air injection in-situ combustion development methods were divided into two types: medium temperature in-situ combustion and high temperature in-situ combustion. When the reservoir temperature is lower than 120 ℃, oxygen-reducing air flooding should be used for light oil reservoir development. When the reservoir temperature is higher than 120 ℃, air flooding method should be used for light oil reservoir development. For a normal heavy oil reservoir, when the combustion front temperature is lower than 400 ℃, the development method is medium temperature in-situ combustion. For a heavy oil reservoir with high oil resin and asphalting contents, when the combustion front temperature is higher than 450 ℃, the development method at this condition is high temperature in-situ combustion. Ten years field tests of air injection carried out by PetroChina proved that air has advantages in technical, economical and gas source aspects compared with other gas agents for oilfield gas injection development. Air injection development can be used in low/super-low permeability light oil reservoirs, medium and high permeability light oil reservoirs and heavy oil reservoirs. Air is a very promising gas flooding agent.
文摘本研究旨在利用质谱技术鉴定野血牦牛与家养牦牛血清中化学衍生物的差异,以明确长期受到高原生态环境自然选择下,野血牦牛更优环境适应性的代谢机制。本研究利用串联质谱技术对西藏阿里改则县的5头野血牦牛和5头家养牦牛的血清进行代谢组功能分析,共鉴定到574个代谢相关化学衍生物质,其中比例最高的是有机酸及其衍生物和氨基酸及其衍生物,21种代谢物质差异显著,较家养牦牛,野血牦牛有7类化学代谢物(邻甲氧基苯甲酸、9,12-十八碳二烯酸、3,4,5-三甲氧基肉桂酸等)显著上调,14类化学代谢物(前列腺素E2、氧化三甲胺、羟基二十碳五烯酸等)显著下调。其中7类化学衍生物(5-羟基吲哚-3-乙酸、鸟苷、尿素、前列腺素E2、皮质醇、5-甲氧基色胺、3-甲基吲哚)富集于31个KEGG信号通路,包括组织系统(Organismal Sysyems)、代谢(Metabolism)、人类疾病(Human Disease)、环境信息过程(Environmental Information Processing)。本研究通过代谢组比较分析,进一步明确了野血牦牛优异的环境适应性代谢基础,同时鉴定到野血牦牛中富含一系列(鸟苷、5-甲基-2-脱氧饱苷、邻甲基苯甲酸等)已明确与心脑血管疾病相关药的化学衍生物,为今后开发抗高原病相关药物开发提供借鉴参考。
