The Qinling-Dabie accretionary fold belt in east-central China represents the E-W trending suture zone between the Sino-Korean and Yangtze cratons. A portion of the accretionary complex exposed in northern Hubei Provi...The Qinling-Dabie accretionary fold belt in east-central China represents the E-W trending suture zone between the Sino-Korean and Yangtze cratons. A portion of the accretionary complex exposed in northern Hubei Province contains a high-pressure / low-temperature metamorphic sequence progressively metamorphosed from the blueschist through greenschist to epidote-amphibolite / eclogite facies. The Hongan metamorphic belt can be divided into three metamorphic zones,based on progressive changes in mineral assemblages: Zone Ⅰ,in the south,is characterized by transitional blueschist-greenschist facies; ZoneⅡis characterized by greenschist facies; ZoneⅢ,in the northern most portion of the belt,is characterized by eclogite and epidote-amphibolite facies sequences. Changes in amphibole compositions from south to north as well as the appearance of increasingly higher pressure mineral assemblages toward the north document differences in metamorphic P-T conditions during formation of this belt. Preliminary P-T estimates for Zone I metamorphism are 5 ~ 7 kbar,350 ~ 450℃; estimates for Zone III eclogites are 10 ~ 22 kbar,500 ±50℃. The petrographic,chemical and structural characteristics of this metamorphic belt indicate its evolutionin a northward-dipping subduction zone and subsequent uplift prior to and during the final collisionbetween the Sino-Korean and Yangtze cratons.展开更多
The insensitivity of semiconductors to visible and infrared light is a key constraint on the utilization of light energy in photocatalytic reactions.Constructing photocatalysts with full-spectrum absorption through su...The insensitivity of semiconductors to visible and infrared light is a key constraint on the utilization of light energy in photocatalytic reactions.Constructing photocatalysts with full-spectrum absorption through surface engineering is an effective approach to fully harnessing light energy in semiconductor materials.Herein,a novel stable Ti_(3)C_(2)T_(x)MXene/CdS heterojunction catalyst is obtained by in-situ epitaxial growth of two-dimensional(2D)CdS nanosheets on 2D MXene interface via a solvothermal method.The exceptional light absorption properties of MXene confer outstanding full-spectrum driven photocat-alytic hydrogen evolution capability upon the heterogeneous catalyst.The unique 2D/2D structure effectively mitigated the recombination of photogenerated carriers,enhancing the photocatalytic performance of the catalyst.Moreover,the composite catalyst exhibits a significantly higher surface temperature of 80.4℃under visible light irradiation at an intensity of 0.1 W/cm^(2),which is 1.84 times higher than that of CdS.Under irradiation of visible and near infrared light,the composite catalyst with photothermal ef-fect demonstrates a remarkable hydrogen evolution rate of 65.4 mmol g^(-1)h^(-1),which is 7.2 times higher than that of CdS catalyst.This study introduces a novel approach for constructing full-spectrum absorption catalysts and expands the application of the photothermal effect in photocatalytic hydrogen evolution research.展开更多
Although different types of powder feedstock are used for additive manufacturing via laser powder bed fusion(L-PBF),limited work has attempted to directly compare the microstructure and mechanical behavior of componen...Although different types of powder feedstock are used for additive manufacturing via laser powder bed fusion(L-PBF),limited work has attempted to directly compare the microstructure and mechanical behavior of components manufactured from those powder feedstock.This work investigated the microstructure,phase composition,melt pool morphology,and mechanical properties of a prealloyed Ti-35Nb alloy manufactured using L-PBF and compared these to their counterparts produced from elemental powder mixture.The samples manufactured from the powder mixture are composed of randomly distributed undissolved Nb in theα/βmatrix,resulting from the unstable melt pool during the melting of the powder mixture.By contrast,parts produced from prealloyed powder display a homogeneous microstructure withβandαphases,owing to the full melting of prealloyed powder,therefore,a more stable melt pool to achieve a homogeneous microstructure.The Ti-35Nb manufactured from prealloyed powder exhibits large tensile ductility(about 10 times that of the counterparts using mixed powder),attributed to the high homogeneity in microstructure and chemical composition,strong interface bonding,relatively low oxygen content,and the existence of a large amount ofβphase.This work sheds insights into understanding the effect of powder feedstock on the melt pool stability therefore the microstructure and mechanical behavior of the resultant parts.展开更多
基金supported by the Stanford-Hubei Bureau of Geology and Mineral Resources co-operative projectMost of the field and analytical data were collected and supported by the GSA and Mc Gee funds ( E. A. E. ),the Stanford China Industrial Affiliates programme and NSF EAR 89-17319
文摘The Qinling-Dabie accretionary fold belt in east-central China represents the E-W trending suture zone between the Sino-Korean and Yangtze cratons. A portion of the accretionary complex exposed in northern Hubei Province contains a high-pressure / low-temperature metamorphic sequence progressively metamorphosed from the blueschist through greenschist to epidote-amphibolite / eclogite facies. The Hongan metamorphic belt can be divided into three metamorphic zones,based on progressive changes in mineral assemblages: Zone Ⅰ,in the south,is characterized by transitional blueschist-greenschist facies; ZoneⅡis characterized by greenschist facies; ZoneⅢ,in the northern most portion of the belt,is characterized by eclogite and epidote-amphibolite facies sequences. Changes in amphibole compositions from south to north as well as the appearance of increasingly higher pressure mineral assemblages toward the north document differences in metamorphic P-T conditions during formation of this belt. Preliminary P-T estimates for Zone I metamorphism are 5 ~ 7 kbar,350 ~ 450℃; estimates for Zone III eclogites are 10 ~ 22 kbar,500 ±50℃. The petrographic,chemical and structural characteristics of this metamorphic belt indicate its evolutionin a northward-dipping subduction zone and subsequent uplift prior to and during the final collisionbetween the Sino-Korean and Yangtze cratons.
基金supported by the National Natural Science Foundation of China(Nos.22078118,21972048,22274059)the Guangdong Laboratory of Lingnan Modern Agriculture Project(Nos.NZ2021029,NT2021010)+1 种基金the Guangzhou Science and Technology Planning Project(No.202201010728)the Guangdong Provincial Key Laboratory of Distributed Energy Systems(No.2020B1212060075).
文摘The insensitivity of semiconductors to visible and infrared light is a key constraint on the utilization of light energy in photocatalytic reactions.Constructing photocatalysts with full-spectrum absorption through surface engineering is an effective approach to fully harnessing light energy in semiconductor materials.Herein,a novel stable Ti_(3)C_(2)T_(x)MXene/CdS heterojunction catalyst is obtained by in-situ epitaxial growth of two-dimensional(2D)CdS nanosheets on 2D MXene interface via a solvothermal method.The exceptional light absorption properties of MXene confer outstanding full-spectrum driven photocat-alytic hydrogen evolution capability upon the heterogeneous catalyst.The unique 2D/2D structure effectively mitigated the recombination of photogenerated carriers,enhancing the photocatalytic performance of the catalyst.Moreover,the composite catalyst exhibits a significantly higher surface temperature of 80.4℃under visible light irradiation at an intensity of 0.1 W/cm^(2),which is 1.84 times higher than that of CdS.Under irradiation of visible and near infrared light,the composite catalyst with photothermal ef-fect demonstrates a remarkable hydrogen evolution rate of 65.4 mmol g^(-1)h^(-1),which is 7.2 times higher than that of CdS catalyst.This study introduces a novel approach for constructing full-spectrum absorption catalysts and expands the application of the photothermal effect in photocatalytic hydrogen evolution research.
基金the support of the Australian Government Research Training Program Scholarship and Forrest Research Foundation Ph D scholarshipthe fnancial support provided by the Open Foundation of Guangxi Key Laboratory of Processing for Non-ferrous Metals and Featured Materials(No.2021GXYSOF03)and the facilitiesthe scientifc and technical assistance of the Australian Microscopy&Microanalysis Research Facility at the Centre for Microscopy,Characterisation&Analysis,The University of Western Australia,a facility funded by the University,State and Commonwealth Governments。
文摘Although different types of powder feedstock are used for additive manufacturing via laser powder bed fusion(L-PBF),limited work has attempted to directly compare the microstructure and mechanical behavior of components manufactured from those powder feedstock.This work investigated the microstructure,phase composition,melt pool morphology,and mechanical properties of a prealloyed Ti-35Nb alloy manufactured using L-PBF and compared these to their counterparts produced from elemental powder mixture.The samples manufactured from the powder mixture are composed of randomly distributed undissolved Nb in theα/βmatrix,resulting from the unstable melt pool during the melting of the powder mixture.By contrast,parts produced from prealloyed powder display a homogeneous microstructure withβandαphases,owing to the full melting of prealloyed powder,therefore,a more stable melt pool to achieve a homogeneous microstructure.The Ti-35Nb manufactured from prealloyed powder exhibits large tensile ductility(about 10 times that of the counterparts using mixed powder),attributed to the high homogeneity in microstructure and chemical composition,strong interface bonding,relatively low oxygen content,and the existence of a large amount ofβphase.This work sheds insights into understanding the effect of powder feedstock on the melt pool stability therefore the microstructure and mechanical behavior of the resultant parts.