Determination of rock mechanical parameters is the most important step in rock mass quality evaluation and has significant impacts on geotechnical engineering practice.Rock mass integrity coefficient(KV)is one of the ...Determination of rock mechanical parameters is the most important step in rock mass quality evaluation and has significant impacts on geotechnical engineering practice.Rock mass integrity coefficient(KV)is one of the most efficient parameters,which is conventionally determined from boreholes.Such approaches,however,are time-consuming and expensive,offer low data coverage of point measurements,require heavy equipment,and are hardly conducted in steep topographic sites.Hence,borehole approaches cannot assess the subsurface thoroughly for rock mass quality evaluation.Alternatively,use of geophysical methods is non-invasive,rapid and economical.The proposed geophysical approach makes useful empirical correlation between geophysical and geotechnical parameters.We evaluated the rock mass quality via integration between KV measured from the limited boreholes and inverted resistivity obtained from electrical resistivity tomography(ERT).The borehole-ERT correlation provided KV along various geophysical profiles for more detailed 2D/3D(two-/three-dimensional)mapping of rock mass quality.The subsurface was thoroughly evaluated for rock masses with different engineering qualities,including highly weathered rock,semi-weathered rock,and fresh rock.Furthermore,ERT was integrated with induced polarization(IP)to resolve the uncertainty caused by water/clay content.Our results show that the proposed method,compared with the conventional approaches,can reduce the ambiguities caused by inadequate data,and give more accurate insights into the subsurface for rock mass quality evaluation.展开更多
The new Austrian tunneling method （NATM） is widely applied in design and construction of underground engineering projects. When the type and distribution of unfavorable geological bodies （UGBs） associated with the...The new Austrian tunneling method （NATM） is widely applied in design and construction of underground engineering projects. When the type and distribution of unfavorable geological bodies （UGBs） associated with their influences on geoengineering are complicated or unfortunately are overlooked, we should pay more attentions to internal features of rocks grades IV and V （even in local but mostly controlling zones）. With increasing attentions to the characteristics, mechanism and influences of engineering construction-triggered geohazards, it is crucial to fully understand the disturbance of these geohazards on project construction. A reasonable determination method in construction procedure, i.e. the shape of working face, the type of engineering support and the choice of feasible procedure, should be considered in order to mitigate the construction-triggered geohazards. Due to their high sensitivity to groundwater and in-situ stress, various UGBs exhibit hysteretic nature and failure modes. To give a complete understanding on the internal causes, the emphasis on advanced comprehensive geological forecasting and overall reinforcement treatment is therefore of more practical significance. Compre- hensive evaluation of influential factors, identification of UGB, and measures of discontinuity dynamic controlling comprises the geoengineering condition evaluation and dynamic controlling method. In a case of a cut slope, the variations of UGBs and the impacts of key environmental factors are presented, where more severe construction-triggered geohazards emerged in construction stage than those predicted in design and field investigation stages. As a result, the weight ratios of different influential factors with respect to field investigation, design and construction are obtained.展开更多
Weathered troughs are frequently encountered in granites. They can cause problems to tunneling in the rocks and have to be properly addressed. The structures or spatial shapes of weathered troughs were seldom clarifie...Weathered troughs are frequently encountered in granites. They can cause problems to tunneling in the rocks and have to be properly addressed. The structures or spatial shapes of weathered troughs were seldom clarified in the past. In this paper, four weathered troughs are identified by means of geophysical exploration, core drilling, logging, and in-situ stress measurement at Daya Bay reactor-neutrino experiment site in Shenzhen, China. The weathered troughs are exposed on the ground or partially covered by grass and soils, which will threaten the safety of horizontal tunneling at a shallow depth. High electrical resistivity （HER） method is adopted for its feasibility and practicality, in combination with field geological observation, ultrasonic televiewer in boreholes and in-situ stress measurement. By comparing the HER values of completely decomposed to fresh rocks, it is indicated that the HER values of weathered troughs in natural state are 0.4-100 D.m, and the in-situ stress is abnormally lower than those at upper and lower layers. Field investigations show that the depths of the four weathered troughs are 30-182 m, with bottom elevation over 10 m. The volume of each weathered trough is mostly over lx l 0^6 m3 in inverted conic form. The weathered troughs often occur in various kinds of landforms, such as ridges, gullies or gently dipping dish-like depression areas. Faults and boundaries of different granitic plutons as well as joints govern the formation, locations and strikes of these troughs under development.展开更多
Long-term stability of large-span caverns is a challenging issue for design and construction of underground rock engineering.The Heidong cavern group consisting of 21 caverns was constructed about 1400 years ago for q...Long-term stability of large-span caverns is a challenging issue for design and construction of underground rock engineering.The Heidong cavern group consisting of 21 caverns was constructed about 1400 years ago for quarrying in massive Cretaceous tuff.The cavern No.5 of the Heidong cavern group is characterized by an unsupported span up to 92 m,with the overburden thickness of only 3-25 m.To analyze its long-term stability,a detailed investigation was conducted to obtain its geometry and rock mass characteristics,and to monitor surrounding rock displacements.Based on field survey and laboratory tests,numerical simulations were performed using the finite difference code FLAC;.The analysis results revealed that for the long-term stability of the cavern No.5,some major factors should be carefully considered,such as cavern excavation method in hard massive rocks,site investigation using trial pits,tools like short iron chisel and hammer for manual excavation,geometric dome roof,and waste rocks within abutment or on the floor.The highlights of the technologies obtained from this large-scale ancient underground project can provide reference for other similar project excavations in practice.展开更多
基金supported by Xinjiang Key Laboratory of Geohazards Prevention(Grant No.XKLGP2022K07)Key R&D Program of Xinjiang Uygur Autonomous Region(Grant No.2022B03001-2)the Third Xinjiang Scientific Expedition Program(Grant No.2022xjkk1305).
文摘Determination of rock mechanical parameters is the most important step in rock mass quality evaluation and has significant impacts on geotechnical engineering practice.Rock mass integrity coefficient(KV)is one of the most efficient parameters,which is conventionally determined from boreholes.Such approaches,however,are time-consuming and expensive,offer low data coverage of point measurements,require heavy equipment,and are hardly conducted in steep topographic sites.Hence,borehole approaches cannot assess the subsurface thoroughly for rock mass quality evaluation.Alternatively,use of geophysical methods is non-invasive,rapid and economical.The proposed geophysical approach makes useful empirical correlation between geophysical and geotechnical parameters.We evaluated the rock mass quality via integration between KV measured from the limited boreholes and inverted resistivity obtained from electrical resistivity tomography(ERT).The borehole-ERT correlation provided KV along various geophysical profiles for more detailed 2D/3D(two-/three-dimensional)mapping of rock mass quality.The subsurface was thoroughly evaluated for rock masses with different engineering qualities,including highly weathered rock,semi-weathered rock,and fresh rock.Furthermore,ERT was integrated with induced polarization(IP)to resolve the uncertainty caused by water/clay content.Our results show that the proposed method,compared with the conventional approaches,can reduce the ambiguities caused by inadequate data,and give more accurate insights into the subsurface for rock mass quality evaluation.
基金support by the National Natural Science Foundation of China (No. 41372324)support from the Chinese Special Funds for Major State Basic Research Project under Grant No. 2010CB732001
文摘The new Austrian tunneling method （NATM） is widely applied in design and construction of underground engineering projects. When the type and distribution of unfavorable geological bodies （UGBs） associated with their influences on geoengineering are complicated or unfortunately are overlooked, we should pay more attentions to internal features of rocks grades IV and V （even in local but mostly controlling zones）. With increasing attentions to the characteristics, mechanism and influences of engineering construction-triggered geohazards, it is crucial to fully understand the disturbance of these geohazards on project construction. A reasonable determination method in construction procedure, i.e. the shape of working face, the type of engineering support and the choice of feasible procedure, should be considered in order to mitigate the construction-triggered geohazards. Due to their high sensitivity to groundwater and in-situ stress, various UGBs exhibit hysteretic nature and failure modes. To give a complete understanding on the internal causes, the emphasis on advanced comprehensive geological forecasting and overall reinforcement treatment is therefore of more practical significance. Compre- hensive evaluation of influential factors, identification of UGB, and measures of discontinuity dynamic controlling comprises the geoengineering condition evaluation and dynamic controlling method. In a case of a cut slope, the variations of UGBs and the impacts of key environmental factors are presented, where more severe construction-triggered geohazards emerged in construction stage than those predicted in design and field investigation stages. As a result, the weight ratios of different influential factors with respect to field investigation, design and construction are obtained.
基金Supported by the National Natural Science Foundation of China (40972198)the National Key Basic Research and Development Program of China(2010CB732001)
文摘Weathered troughs are frequently encountered in granites. They can cause problems to tunneling in the rocks and have to be properly addressed. The structures or spatial shapes of weathered troughs were seldom clarified in the past. In this paper, four weathered troughs are identified by means of geophysical exploration, core drilling, logging, and in-situ stress measurement at Daya Bay reactor-neutrino experiment site in Shenzhen, China. The weathered troughs are exposed on the ground or partially covered by grass and soils, which will threaten the safety of horizontal tunneling at a shallow depth. High electrical resistivity （HER） method is adopted for its feasibility and practicality, in combination with field geological observation, ultrasonic televiewer in boreholes and in-situ stress measurement. By comparing the HER values of completely decomposed to fresh rocks, it is indicated that the HER values of weathered troughs in natural state are 0.4-100 D.m, and the in-situ stress is abnormally lower than those at upper and lower layers. Field investigations show that the depths of the four weathered troughs are 30-182 m, with bottom elevation over 10 m. The volume of each weathered trough is mostly over lx l 0^6 m3 in inverted conic form. The weathered troughs often occur in various kinds of landforms, such as ridges, gullies or gently dipping dish-like depression areas. Faults and boundaries of different granitic plutons as well as joints govern the formation, locations and strikes of these troughs under development.
基金financial support by the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection,Chengdu University of Technology(Grant No.SKLGP2011K007)the Key Research Program of the Chinese Academy of Sciences(KZZD-EW05-02)the National Natural Science Foundation of China (Nos.41372324,40972198 and 41172269)
文摘Long-term stability of large-span caverns is a challenging issue for design and construction of underground rock engineering.The Heidong cavern group consisting of 21 caverns was constructed about 1400 years ago for quarrying in massive Cretaceous tuff.The cavern No.5 of the Heidong cavern group is characterized by an unsupported span up to 92 m,with the overburden thickness of only 3-25 m.To analyze its long-term stability,a detailed investigation was conducted to obtain its geometry and rock mass characteristics,and to monitor surrounding rock displacements.Based on field survey and laboratory tests,numerical simulations were performed using the finite difference code FLAC;.The analysis results revealed that for the long-term stability of the cavern No.5,some major factors should be carefully considered,such as cavern excavation method in hard massive rocks,site investigation using trial pits,tools like short iron chisel and hammer for manual excavation,geometric dome roof,and waste rocks within abutment or on the floor.The highlights of the technologies obtained from this large-scale ancient underground project can provide reference for other similar project excavations in practice.
