Objective This study aimed to identify differentially methylated genes(DMGs) associated with natural killer cells in patients with autoimmune thyroiditis(AIT), focusing on the influence of varying water iodine exposur...Objective This study aimed to identify differentially methylated genes(DMGs) associated with natural killer cells in patients with autoimmune thyroiditis(AIT), focusing on the influence of varying water iodine exposure levels.Methods Participants were divided into categories based on median water iodine(MWI)concentrations: iodine-fortified areas(IFA, MWI < 10 μg/L), iodine-adequate areas(IAA, 40 ≤ MWI ≤ 100μg/L), and iodine-excessive areas(IEA, MWI > 300 μg/L). A total of 176 matched AIT cases and controls were recruited and divided into 89, 40, and 47 pairs for IFA, IAA, and IEA, respectively. DMGs were identified using 850K Bead Chip analysis for 10/10 paired samples. Validation of DNA methylation and m RNA expression levels of the DMGs was conducted using Methyl Target^(TM) and QRT-PCR for 176/176paired samples.Results KLRC1, KLRC3, and SH2D1B were identified as significant DMGs. Validation revealed that KLRC1 was hypomethylated and highly expressed, whereas KLRC3 was hypermethylated and highly expressed in individuals with AIT. Furthermore, KLRC1 was hypomethylated and highly expressed in both IFA and IEA.Conclusion The DNA methylation status of KLRC1 and KLRC3 may play crucial roles in AIT pathogenesis. Additionally, DNA methylation of KLRC1 seems to be influenced by different iodine concentrations in water.展开更多
The solar flare is one of the most violent explosions,and can disturb the near-Earth space weather.Except for commonly single-peaked solar flares in soft X-ray,some special flares show intriguing a two-peak feature th...The solar flare is one of the most violent explosions,and can disturb the near-Earth space weather.Except for commonly single-peaked solar flares in soft X-ray,some special flares show intriguing a two-peak feature that is deserved much more attentions.Here,we reported a confined two-peaked solar flare and analyzed the associated eruptions using high-quality observations from Educational Adaptive-optics Solar Telescope and Solar Dynamics Observatory.Before the flare,a magnetic flux rope(MFR)formed through partially tether-cutting reconnection between two sheared arches.The flare occurred after the MFR eruption that was confined by the overlying strong field.Interestingly,a small underlying filament immediately erupted,which was possibly destabilized by the flare ribbon.The successive eruptions were confirmed by the analysis of the emission measure and the reconnection fluxes.Therefore,we suggest that the two peaks of the confined solar flare are corresponding to two episodes of magnetic reconnection during the successive eruptions of the MFR and the underlying filament.展开更多
The practical applications of magnesium(Mg)alloys are usually beset by their relatively low strength and limited ductility.Herein we attempt to fabricate hexagonal BN nanoplatelet(BNNP)reinforced ZK61 magnesium compos...The practical applications of magnesium(Mg)alloys are usually beset by their relatively low strength and limited ductility.Herein we attempt to fabricate hexagonal BN nanoplatelet(BNNP)reinforced ZK61 magnesium composites using a combination of spark plasma sintering and friction stir processing.The resulting composites exhibit microstructural characteristics of homogeneous dispersion of BNNP in Mg matrix with refined equiaxed grains and(0002)basal texture roughly surrounding the pin column surface.Transmission electron microscopy observation illustrates that trace amounts of Mg_(3)N_(2)and MgB_(2)form at BNNP-Mg interface,in which Mg_(3)N_(2)locates at the basal plane of a BNNP and MgB_(2)grows at its open edge.The spatial distribution of Mg_(3)N_(2)and MgB_(2)facilitates interfacial wetting and stronger BNNP-Mg interface in such a way that interfacial products act as anchors bonding between them.In comparison with monolithic ZK61 alloy,the BNNP/ZK61 composites display simultaneous improvements in yield strength,hardness and ductility,achieving good strength-ductility balance.This research is expected to shed some light on BNNP potentials for designing and producing magnesium composites with high strength and good ductility.展开更多
The d-d orbital coupling induced by crystal-phase engineering can effectively adjust the electronic structure of electrocatalysts,thus showing significant catalytic performance,while it has been rarely explored in ele...The d-d orbital coupling induced by crystal-phase engineering can effectively adjust the electronic structure of electrocatalysts,thus showing significant catalytic performance,while it has been rarely explored in electrochemical acetonitrile reduction reaction(ARR)to date.Herein,we successfully realize the structural transformation of Pd Cu metallic aerogels(MAs)from face-centered cubic(FCC)to body-centered cubic(BCC)through annealing treatment.Specifically,the BCC Pd Cu MAs exhibit excellent ARR performance with high ethylamine selectivity of 90.91%,Faradaic efficiency of 88.60%,yield rate of 316.0 mmol h^(-1)g^(-1)_(Pd+Cu)and long-term stability for consecutive electrolysis within 20 h at-0.55 V vs.reversible hydrogen electrode,outperforming than those of FCC Pd Cu MAs.Under the membrane electrode assembly system,BCC Pd Cu MAs also demonstrate excellent ethylamine yield rate of 389.5 mmol h^(-1)g^(-1)_(Pd+Cu).Density functional theory calculation reveals that the d-d orbital coupling in BCC Pd Cu MAs results in an evident correlation effect for the interaction of Pd and Cu sites,which boosts up the Cu sites electronic activities to enhance ARR performance.Our work opens a new route to develop efficient ARR electrocatalysts from the perspective of crystalline structure transformation.展开更多
Conical origami structures are characterized by their substantial out-of-plane stiffness and energy-absorptioncapacity.Previous investigations have commonly focused on the static characteristics of these lightweight s...Conical origami structures are characterized by their substantial out-of-plane stiffness and energy-absorptioncapacity.Previous investigations have commonly focused on the static characteristics of these lightweight struc-tures.However,the efficient analysis of the natural vibrations of these structures is pivotal for designing conicalorigami structures with programmable stiffness and mass.In this paper,we propose a novel method to analyzethe natural vibrations of such structures by combining a symmetric substructuring method(SSM)and a gener-alized eigenvalue analysis.SSM exploits the inherent symmetry of the structure to decompose it into a finiteset of repetitive substructures.In doing so,we reduce the dimensions of matrices and improve computationalefficiency by adopting the stiffness and mass matrices of the substructures in the generalized eigenvalue analysis.Finite element simulations of pin-jointed models are used to validate the computational results of the proposedapproach.Moreover,the parametric analysis of the structures demonstrates the influences of the number of seg-ments along the circumference and the radius of the cone on the structural mass and natural frequencies of thestructures.Furthermore,we present a comparison between six-fold and four-fold conical origami structures anddiscuss the influence of various geometric parameters on their natural frequencies.This study provides a strategyfor efficiently analyzing the natural vibration of symmetric origami structures and has the potential to contributeto the efficient design and customization of origami metastructures with programmable stiffness.展开更多
Existing microfabricated atomic vapor cells have only one optical channel,which is insufficient for supporting the multiple orthogonal beams required by atomic devices.In this study,we present a novel wafer-level manu...Existing microfabricated atomic vapor cells have only one optical channel,which is insufficient for supporting the multiple orthogonal beams required by atomic devices.In this study,we present a novel wafer-level manufacturing process for fabricating multi-optical-channel atomic vapor cells and an innovative method for batch processing the inner sidewalls of millimeter glass holes to meet optical channel requirements.Surface characterization and transmittance tests demonstrate that the processed inner sidewalls satisfy the criteria for an optical channel.In addition,the construction of an integrated processing platform enables multilayer non-isothermal anode bonding,the filling of inert gases,and the recovery and recycling of noble gases.Measurements of the absorption spectra and free-induction decay signals of xenon-129(^(129)Xe)and xenon-131(^(131)Xe)under different pump-probe schemes demonstrate the suitability of our vapor cell for use in atomic devices including atomic gyroscopes,dual-beam atomic magnetometers,and other optical/atomic devices.The proposed micromolding technology has broad application prospects in the field of optical-device processing.展开更多
The radioheliograph is an extensive array of antennas operating on the principle of aperture synthesis to produce images of the Sun.The image acquired by the telescope results from convoluting the Sun’s true brightne...The radioheliograph is an extensive array of antennas operating on the principle of aperture synthesis to produce images of the Sun.The image acquired by the telescope results from convoluting the Sun’s true brightness distribution with the antenna array’s directional pattern.The imaging quality of the radioheliograph is affected by a multitude of factors,with the performance of the“dirty beam”being simply one component.Other factors such as imaging methods,calibration techniques,clean algorithms,and more also play a significant influence on the resulting image quality.As the layout of the antenna array directly affects the performance of the dirty beam,the design of an appropriate antenna configuration is critical to improving the imaging quality of the radioheliograph.Based on the actual needs of observing the Sun,this work optimized the antenna array design and proposed a twodimensional low-redundancy array.The proposed array was compared with common T-shaped arrays,Y-shaped arrays,uniformly spaced circular arrays,and three-arm spiral arrays.Through simulations and experiments,their performance in terms of sampling point numbers,UV coverage area,beam-half width,sidelobe level,and performance in the absence of antennas are compared and analyzed.It was found that each of these arrays has its advantages,but the two-dimensional low-redundancy array proposed in this paper performs best in overall evaluation.It has the shortest imaging calculation time among the array types and is highly robust when antennas are missing,making it the most suitable choice.展开更多
基金supported by National Natural Science Foundation of China,82073490.
文摘Objective This study aimed to identify differentially methylated genes(DMGs) associated with natural killer cells in patients with autoimmune thyroiditis(AIT), focusing on the influence of varying water iodine exposure levels.Methods Participants were divided into categories based on median water iodine(MWI)concentrations: iodine-fortified areas(IFA, MWI < 10 μg/L), iodine-adequate areas(IAA, 40 ≤ MWI ≤ 100μg/L), and iodine-excessive areas(IEA, MWI > 300 μg/L). A total of 176 matched AIT cases and controls were recruited and divided into 89, 40, and 47 pairs for IFA, IAA, and IEA, respectively. DMGs were identified using 850K Bead Chip analysis for 10/10 paired samples. Validation of DNA methylation and m RNA expression levels of the DMGs was conducted using Methyl Target^(TM) and QRT-PCR for 176/176paired samples.Results KLRC1, KLRC3, and SH2D1B were identified as significant DMGs. Validation revealed that KLRC1 was hypomethylated and highly expressed, whereas KLRC3 was hypermethylated and highly expressed in individuals with AIT. Furthermore, KLRC1 was hypomethylated and highly expressed in both IFA and IEA.Conclusion The DNA methylation status of KLRC1 and KLRC3 may play crucial roles in AIT pathogenesis. Additionally, DNA methylation of KLRC1 seems to be influenced by different iodine concentrations in water.
基金supported by grants of the National Natural Foundation of China(NSFC12073016)the open topic of the Yunnan Key Laboratory of Solar Physics and Space Science(YNSPCC202217)。
文摘The solar flare is one of the most violent explosions,and can disturb the near-Earth space weather.Except for commonly single-peaked solar flares in soft X-ray,some special flares show intriguing a two-peak feature that is deserved much more attentions.Here,we reported a confined two-peaked solar flare and analyzed the associated eruptions using high-quality observations from Educational Adaptive-optics Solar Telescope and Solar Dynamics Observatory.Before the flare,a magnetic flux rope(MFR)formed through partially tether-cutting reconnection between two sheared arches.The flare occurred after the MFR eruption that was confined by the overlying strong field.Interestingly,a small underlying filament immediately erupted,which was possibly destabilized by the flare ribbon.The successive eruptions were confirmed by the analysis of the emission measure and the reconnection fluxes.Therefore,we suggest that the two peaks of the confined solar flare are corresponding to two episodes of magnetic reconnection during the successive eruptions of the MFR and the underlying filament.
基金the financial support from The National Key Research and Development Program of China(2018YFC1106703)National Natural Science Foundation of China(51471113,51275326)。
文摘The practical applications of magnesium(Mg)alloys are usually beset by their relatively low strength and limited ductility.Herein we attempt to fabricate hexagonal BN nanoplatelet(BNNP)reinforced ZK61 magnesium composites using a combination of spark plasma sintering and friction stir processing.The resulting composites exhibit microstructural characteristics of homogeneous dispersion of BNNP in Mg matrix with refined equiaxed grains and(0002)basal texture roughly surrounding the pin column surface.Transmission electron microscopy observation illustrates that trace amounts of Mg_(3)N_(2)and MgB_(2)form at BNNP-Mg interface,in which Mg_(3)N_(2)locates at the basal plane of a BNNP and MgB_(2)grows at its open edge.The spatial distribution of Mg_(3)N_(2)and MgB_(2)facilitates interfacial wetting and stronger BNNP-Mg interface in such a way that interfacial products act as anchors bonding between them.In comparison with monolithic ZK61 alloy,the BNNP/ZK61 composites display simultaneous improvements in yield strength,hardness and ductility,achieving good strength-ductility balance.This research is expected to shed some light on BNNP potentials for designing and producing magnesium composites with high strength and good ductility.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52161135302,22105087)the Postdoctoral Research Foundation of China(Grant No.2022M721360)the Natural Science Foundation of Jiangsu Province(Grant No.BK20210446)。
文摘The d-d orbital coupling induced by crystal-phase engineering can effectively adjust the electronic structure of electrocatalysts,thus showing significant catalytic performance,while it has been rarely explored in electrochemical acetonitrile reduction reaction(ARR)to date.Herein,we successfully realize the structural transformation of Pd Cu metallic aerogels(MAs)from face-centered cubic(FCC)to body-centered cubic(BCC)through annealing treatment.Specifically,the BCC Pd Cu MAs exhibit excellent ARR performance with high ethylamine selectivity of 90.91%,Faradaic efficiency of 88.60%,yield rate of 316.0 mmol h^(-1)g^(-1)_(Pd+Cu)and long-term stability for consecutive electrolysis within 20 h at-0.55 V vs.reversible hydrogen electrode,outperforming than those of FCC Pd Cu MAs.Under the membrane electrode assembly system,BCC Pd Cu MAs also demonstrate excellent ethylamine yield rate of 389.5 mmol h^(-1)g^(-1)_(Pd+Cu).Density functional theory calculation reveals that the d-d orbital coupling in BCC Pd Cu MAs results in an evident correlation effect for the interaction of Pd and Cu sites,which boosts up the Cu sites electronic activities to enhance ARR performance.Our work opens a new route to develop efficient ARR electrocatalysts from the perspective of crystalline structure transformation.
基金supported by the National Natural Science Foundation of China(Grants Nos.51978150 and 52050410334)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grants No.SJCX23_0069)the Fundamental Research Funds for the Central Universities.
文摘Conical origami structures are characterized by their substantial out-of-plane stiffness and energy-absorptioncapacity.Previous investigations have commonly focused on the static characteristics of these lightweight struc-tures.However,the efficient analysis of the natural vibrations of these structures is pivotal for designing conicalorigami structures with programmable stiffness and mass.In this paper,we propose a novel method to analyzethe natural vibrations of such structures by combining a symmetric substructuring method(SSM)and a gener-alized eigenvalue analysis.SSM exploits the inherent symmetry of the structure to decompose it into a finiteset of repetitive substructures.In doing so,we reduce the dimensions of matrices and improve computationalefficiency by adopting the stiffness and mass matrices of the substructures in the generalized eigenvalue analysis.Finite element simulations of pin-jointed models are used to validate the computational results of the proposedapproach.Moreover,the parametric analysis of the structures demonstrates the influences of the number of seg-ments along the circumference and the radius of the cone on the structural mass and natural frequencies of thestructures.Furthermore,we present a comparison between six-fold and four-fold conical origami structures anddiscuss the influence of various geometric parameters on their natural frequencies.This study provides a strategyfor efficiently analyzing the natural vibration of symmetric origami structures and has the potential to contributeto the efficient design and customization of origami metastructures with programmable stiffness.
基金supported in part by the National Key Research and Development Plan(2022YFB3203400)the National Natural Science Foundation of China(62103324 and U1909221)the Natural Science Foundation of Shaanxi(2022JQ-554).
文摘Existing microfabricated atomic vapor cells have only one optical channel,which is insufficient for supporting the multiple orthogonal beams required by atomic devices.In this study,we present a novel wafer-level manufacturing process for fabricating multi-optical-channel atomic vapor cells and an innovative method for batch processing the inner sidewalls of millimeter glass holes to meet optical channel requirements.Surface characterization and transmittance tests demonstrate that the processed inner sidewalls satisfy the criteria for an optical channel.In addition,the construction of an integrated processing platform enables multilayer non-isothermal anode bonding,the filling of inert gases,and the recovery and recycling of noble gases.Measurements of the absorption spectra and free-induction decay signals of xenon-129(^(129)Xe)and xenon-131(^(131)Xe)under different pump-probe schemes demonstrate the suitability of our vapor cell for use in atomic devices including atomic gyroscopes,dual-beam atomic magnetometers,and other optical/atomic devices.The proposed micromolding technology has broad application prospects in the field of optical-device processing.
基金supported by the grants of the National Natural Science Foundation of China(42127804,42374219)。
文摘The radioheliograph is an extensive array of antennas operating on the principle of aperture synthesis to produce images of the Sun.The image acquired by the telescope results from convoluting the Sun’s true brightness distribution with the antenna array’s directional pattern.The imaging quality of the radioheliograph is affected by a multitude of factors,with the performance of the“dirty beam”being simply one component.Other factors such as imaging methods,calibration techniques,clean algorithms,and more also play a significant influence on the resulting image quality.As the layout of the antenna array directly affects the performance of the dirty beam,the design of an appropriate antenna configuration is critical to improving the imaging quality of the radioheliograph.Based on the actual needs of observing the Sun,this work optimized the antenna array design and proposed a twodimensional low-redundancy array.The proposed array was compared with common T-shaped arrays,Y-shaped arrays,uniformly spaced circular arrays,and three-arm spiral arrays.Through simulations and experiments,their performance in terms of sampling point numbers,UV coverage area,beam-half width,sidelobe level,and performance in the absence of antennas are compared and analyzed.It was found that each of these arrays has its advantages,but the two-dimensional low-redundancy array proposed in this paper performs best in overall evaluation.It has the shortest imaging calculation time among the array types and is highly robust when antennas are missing,making it the most suitable choice.
