The Schwarz primitive triply periodic minimal surface(P-type TPMS)lattice structures are widely used.However,these lattice structures have weak load-bearing capacity compared with other cellular structures.In this pap...The Schwarz primitive triply periodic minimal surface(P-type TPMS)lattice structures are widely used.However,these lattice structures have weak load-bearing capacity compared with other cellular structures.In this paper,an adaptive enhancement design method based on the non-uniform stress distribution in structures with uniform thickness is proposed to design the P-type TPMS lattice structures with higher mechanical properties.Two types of structures are designed by adjusting the adaptive thickness distribution in the TPMS.One keeps the same relative density,and the other keeps the same of non-enhanced region thickness.Compared with the uniform lattice structure,the elastic modulus for the structure with the same relative density increases by more than 17%,and the yield strength increases by more than 10.2%.Three kinds of TPMS lattice structures are fabricated by laser powder bed fusion(L-PBF)with 316L stainless steel to verify the proposed enhanced design.The manufacture-induced geometric deviation between the as-design and as-printed models is measured by micro X-ray computed tomography(μ-CT)scans.The quasi-static compression experimental results of P-type TPMS lattice structures show that the reinforced structures have stronger elastic moduli,ultimate strengths,and energy absorption capabilities than the homogeneous P-TPMS lattice structure.展开更多
An efficient compensation scheme combining a timedomain Gaussian elimination（GE） channel estimator and a frequency-domain GE equalizer is proposed for orthogonal frequency division multiplexing（OFDM） systems with ...An efficient compensation scheme combining a timedomain Gaussian elimination（GE） channel estimator and a frequency-domain GE equalizer is proposed for orthogonal frequency division multiplexing（OFDM） systems with frequencydependent in-phase and quadrature-phase（IQ） imbalances at both transmitter and receiver.Compared with the traditional least square and least mean square compensation schemes,the proposed compensation scheme achieves the same bit error rate as the ideal IQ branches by using only two training OFDM symbols instead of about 20 OFDM symbols.展开更多
In this paper,we develop the criterion on the upper semi-continuity of random attractors by a weak-to-weak limit replacing the usual norm-to-norm limit.As an application,we obtain the convergence of random attractors ...In this paper,we develop the criterion on the upper semi-continuity of random attractors by a weak-to-weak limit replacing the usual norm-to-norm limit.As an application,we obtain the convergence of random attractors for non-autonomous stochastic reactiondiffusion equations on unbounded domains,when the density of stochastic noises approaches zero.The weak convergence of solutions is proved by means of Alaoglu weak compactness theorem.A differentiability condition on nonlinearity is omitted,which implies that the existence conditions for random attractors are sufficient to ensure their upper semi-continuity.These results greatly strengthen the upper semi-continuity notion that has been developed in the literature.展开更多
Ionic gating is known as a powerful tool for investigation of electronic functionalities stemming from low voltage transistor operation to gate-induced electronic phase control including superconductivity.Two-dimensio...Ionic gating is known as a powerful tool for investigation of electronic functionalities stemming from low voltage transistor operation to gate-induced electronic phase control including superconductivity.Two-dimensional(2D)material is one of the archetypal channel materials which exhibit a variety of gate-induced phenomena.Nevertheless,the device simulations on such iongated transistor devices have never been reported,despite its importance for the future design of device structures.In this paper,we developed a drift-diffusion(DD)model on a 2D material,WSe2 monolayer,attached with an ionic liquid,and succeeded in simulating the transport properties,potential profile,carrier density distributions in the transistor configuration.展开更多
A mechanical metamaterial that has a tailorable coefficient of thermal expansion(CTE)is promising for guaranteeing the reliability of electrical and optical instruments under thermal fluctuations.Despite growing resea...A mechanical metamaterial that has a tailorable coefficient of thermal expansion(CTE)is promising for guaranteeing the reliability of electrical and optical instruments under thermal fluctuations.Despite growing research on the design and manufacturing of metamaterials with extraordinary CTEs,it remains challenging to achieve a nearly isotropic tailorable CTE while ensuring a sufficient load bearing capacity for applications,such as mechanical supporting frames.In this research,we propose a type of bi-metallic lattice whose CTE is artificially programmed from positive(75 ppm/K)to negative(−45 ppm/K),and whose equivalent modulus can be as high as 80 MPa.The bi-metallic lattice with a tailorable CTE in two orthogonal directions can be readily assembled without special modifications to construct large-scale planar structures with desired isotropic CTEs.A theoretical model that considers the actual configuration of the bi-metallic joint is developed;the model precisely captures the thermal deformations of lattice structures with varied geometries and material compositions.Guided by our theoretical design method,planar metallic structures that were manufactured using Al,Ti,and Invar alloy were experimentally characterized;the structures exhibited outstanding performance when compared with typical engineering materials.展开更多
The original version of this Article contained an error in the spelling of the last word of the Title.This error has been corrected in both the PDF and HTML versions of the Article.
基金supported by the National Natural Science Foundation of China(Nos.12002031,12122202U22B2083)+1 种基金the China Postdoctoral Science Foundation(Nos.BX2021038 and 2021M700428)the National Key Research and Development of China(No.2022YFB4601901)。
文摘The Schwarz primitive triply periodic minimal surface(P-type TPMS)lattice structures are widely used.However,these lattice structures have weak load-bearing capacity compared with other cellular structures.In this paper,an adaptive enhancement design method based on the non-uniform stress distribution in structures with uniform thickness is proposed to design the P-type TPMS lattice structures with higher mechanical properties.Two types of structures are designed by adjusting the adaptive thickness distribution in the TPMS.One keeps the same relative density,and the other keeps the same of non-enhanced region thickness.Compared with the uniform lattice structure,the elastic modulus for the structure with the same relative density increases by more than 17%,and the yield strength increases by more than 10.2%.Three kinds of TPMS lattice structures are fabricated by laser powder bed fusion(L-PBF)with 316L stainless steel to verify the proposed enhanced design.The manufacture-induced geometric deviation between the as-design and as-printed models is measured by micro X-ray computed tomography(μ-CT)scans.The quasi-static compression experimental results of P-type TPMS lattice structures show that the reinforced structures have stronger elastic moduli,ultimate strengths,and energy absorption capabilities than the homogeneous P-TPMS lattice structure.
基金supported by the National Natural Science Fundation of China(6127123061172073)the Open Research Fund of National Mobile Communications Research Lab(2010D13)
文摘An efficient compensation scheme combining a timedomain Gaussian elimination（GE） channel estimator and a frequency-domain GE equalizer is proposed for orthogonal frequency division multiplexing（OFDM） systems with frequencydependent in-phase and quadrature-phase（IQ） imbalances at both transmitter and receiver.Compared with the traditional least square and least mean square compensation schemes,the proposed compensation scheme achieves the same bit error rate as the ideal IQ branches by using only two training OFDM symbols instead of about 20 OFDM symbols.
文摘In this paper,we develop the criterion on the upper semi-continuity of random attractors by a weak-to-weak limit replacing the usual norm-to-norm limit.As an application,we obtain the convergence of random attractors for non-autonomous stochastic reactiondiffusion equations on unbounded domains,when the density of stochastic noises approaches zero.The weak convergence of solutions is proved by means of Alaoglu weak compactness theorem.A differentiability condition on nonlinearity is omitted,which implies that the existence conditions for random attractors are sufficient to ensure their upper semi-continuity.These results greatly strengthen the upper semi-continuity notion that has been developed in the literature.
基金This research was supported by Grant-in-Aid for Scientific Research(S)(no.19H05602)Grant-in-Aid for Scientific Research(C)(no.19K05201)from JSPS.
文摘Ionic gating is known as a powerful tool for investigation of electronic functionalities stemming from low voltage transistor operation to gate-induced electronic phase control including superconductivity.Two-dimensional(2D)material is one of the archetypal channel materials which exhibit a variety of gate-induced phenomena.Nevertheless,the device simulations on such iongated transistor devices have never been reported,despite its importance for the future design of device structures.In this paper,we developed a drift-diffusion(DD)model on a 2D material,WSe2 monolayer,attached with an ionic liquid,and succeeded in simulating the transport properties,potential profile,carrier density distributions in the transistor configuration.
基金supported by the National Natural Science Foundation of China(Grant Nos.12122202,12002032,and 12002031).
文摘A mechanical metamaterial that has a tailorable coefficient of thermal expansion(CTE)is promising for guaranteeing the reliability of electrical and optical instruments under thermal fluctuations.Despite growing research on the design and manufacturing of metamaterials with extraordinary CTEs,it remains challenging to achieve a nearly isotropic tailorable CTE while ensuring a sufficient load bearing capacity for applications,such as mechanical supporting frames.In this research,we propose a type of bi-metallic lattice whose CTE is artificially programmed from positive(75 ppm/K)to negative(−45 ppm/K),and whose equivalent modulus can be as high as 80 MPa.The bi-metallic lattice with a tailorable CTE in two orthogonal directions can be readily assembled without special modifications to construct large-scale planar structures with desired isotropic CTEs.A theoretical model that considers the actual configuration of the bi-metallic joint is developed;the model precisely captures the thermal deformations of lattice structures with varied geometries and material compositions.Guided by our theoretical design method,planar metallic structures that were manufactured using Al,Ti,and Invar alloy were experimentally characterized;the structures exhibited outstanding performance when compared with typical engineering materials.
文摘The original version of this Article contained an error in the spelling of the last word of the Title.This error has been corrected in both the PDF and HTML versions of the Article.
