This study mainly investigates the mechanical mechanism of overlying strata breaking and the development of fractured zones during close-distance coal seam group mining in the Gaojialiang coal mine.First,a mechanical ...This study mainly investigates the mechanical mechanism of overlying strata breaking and the development of fractured zones during close-distance coal seam group mining in the Gaojialiang coal mine.First,a mechanical model for the second"activation"of broken overlying strata is established,and the related mechanical"activation"conditions are obtained.A recursive formula for calculating the separation distance of overlying strata is deduced.Second,a height determining method for predicting the height of fractured zones during close-distance coal seam group mining is proposed based on two values,namely,the separation distance and ultimate subsidence value of overlying strata.This method is applied to calculate the fractured zone heights in nos.20107 and 20307 mining faces.The calculated results are almost equal to the field observation results.Third,a modified formula for calculating the height of a waterflowing fractured zone is proposed.A comparison of the calculated and observed results shows that the errors are small.The height determining method and modified formula not only build a theoretical foundation for water conservation mining at the Gaojialiang coal mine,but also provide a reference for estimating the height of water-flowing fractured zones in other coal mines with similar conditions.展开更多
Multi-seam mining often leads to the retention of a significant number of coal pillars for purposes such as protection,safety,or water isolation.However,stress concentration beneath these residual coal pillars can sig...Multi-seam mining often leads to the retention of a significant number of coal pillars for purposes such as protection,safety,or water isolation.However,stress concentration beneath these residual coal pillars can significantly impact their strength and stability when mining below them,potentially leading to hydraulic support failure,surface subsidence,and rock bursting.To address this issue,the linkage between the failure and instability of residual coal pillars and rock strata during multi-seam mining is examined in this study.Key controls include residual pillar spalling,safety factor(f.),local mine stiffness(LMS),and the post-peak stiffness(k)of the residual coal pillar.Limits separating the two forms of failure,progressive versus dynamic,are defined.Progressive failure results at lower stresses when the coal pillar transitions from indefinitely stable(f,>1.5)to failing(f,<1.5)when the coal pillar can no longer remain stable for an extended duration,whereas sud-den(unstable)failure results when the strength of the pillar is further degraded and fails.The transition in mode of failure is defined by the LMS/k ratio.Failure transitions from quiescent to dynamic as LMS/k.<1,which can cause chain pillar instability propagating throughout the mine.This study provides theoretical guidance to define this limit to instability of residual coal pillars for multi-seam mining in similar mines.展开更多
Rheological mechanical properties of the soft rock are afected signifcantly by its main physical characteristics-clay mineral.In this study,taking the mudstone on the roof and foor in four typical mining regions as th...Rheological mechanical properties of the soft rock are afected signifcantly by its main physical characteristics-clay mineral.In this study,taking the mudstone on the roof and foor in four typical mining regions as the research object,frstly,the clay mineral characteristic was analyzed by the X-ray difraction test.Subsequently,rheological mechanical properties of mudstone samples under diferent confning pressures are studied through triaxial compression and creep tests.The results show that the clay mineral content of mudstone in diferent regions is diferent,which leads to signifcant diferences in its rheological properties,and these diferences have a good correlation with the content of montmorillonite and illite-montmorillonite mixed layer.Taking the montmorillonite content as an example,compared with the sample with 3.56%under the lower stress level,the initial creep deformation of the sample with 11.19%increased by 3.25 times,the viscosity coefcient and longterm strength decreased by 80.59%and 53.94%,respectively.Furthermore,based on the test results,the damage variation is constructed considering the montmorillonite content and stress level,and the M–S creep damage constitutive model of soft rock is established.Finally,the test results can be ftted with determination coefcients ranging from 0.9020 to 0.9741,which proves that the constitutive relation can refect the infuence of the clay mineral content in the samples preferably.This study has an important reference for revealing the long-term stability control mechanism of soft rock roadway rich in clay minerals.展开更多
Large and super-large section chamber groups in coal mines are frequently affected by dynamic loads resulting from production activities such as roadway driving and blasting.The stability of the surrounding rock is po...Large and super-large section chamber groups in coal mines are frequently affected by dynamic loads resulting from production activities such as roadway driving and blasting.The stability of the surrounding rock is poor,and it is difficult to control.In this paper,a similar simulation test was used to study the deformation and evolution laws of the surrounding rock of a triangle-shaped chamber group under different dynamic loads.The results showed that under dynamic loading,the vertical stress of the surrounding rock of the chamber group increased in an oscillatory form.The maximum stress concentration coefficient reached 4.09.The damage degree of the roof was greater than that of the two sides.The deformation of the roof was approximately 1.2 times that of the two sides.For the chamber closer to the power source,the stress oscillation amplitude of the surrounding rock was larger,and the failure was more serious.The force of the anchorage structure showed a phased increasing characteristic;additionally,the force of the anchorage structure on the adjacent side of the chambers was greater than that on the other side.This study reveals the deformation and failure evolution laws of the surrounding rock of large section chamber groups under dynamic loading.展开更多
The stress concentration and failure at chamber intersections in coal mine are intense,especially in deepburied,super-large section conditions.In this paper,the plastic radius of super-large section chamber under uneq...The stress concentration and failure at chamber intersections in coal mine are intense,especially in deepburied,super-large section conditions.In this paper,the plastic radius of super-large section chamber under unequal pressure was corrected on the basis of the size effect.Then,stress and failure evolution of intersections under different crossing angles and equivalent angular bisectors were revealed.Furthermore,2 trajectory curves of failure and stress were analytically expressed,which divided the intersection into 5 influencing zones in the light of stress superposition degree.After determining instability trigger point and instability path,instability energy criterion of intersection can be obtained as K>1,which means that the external energy is greater than the sum of energy consumed by surrounding rock instability and supporting structure failure.Taking coal-gangue separation system of Longgu Coal Mine as example,it was found that there was instability risk under original parameters.For long-term stability,an optimization design method was proposed by considering safety factor,and optimal support scheme was obtained.Field monitoring showed intersections deformations were relatively small with the maximum of 125 mm,which verified the rationality of theoretical analysis.This study provides guidance for the stability control of the intersections under the same or similar conditions.展开更多
The weathering steels are prone to pitting corrosion in an environment containing chloride ions.The pitting behavior of Cu-P-RE weathering steels and its effect on the corrosion resistance of steels were investigated ...The weathering steels are prone to pitting corrosion in an environment containing chloride ions.The pitting behavior of Cu-P-RE weathering steels and its effect on the corrosion resistance of steels were investigated by multifarious analytical techniques,such as field emission-scanning electron microscopy(FE-SEM),electron probe microanalysis(EPMA),scanning Kelvin probe force microscopy(SKPFM),electrochemical workstation and a series of immersion tests.The results show that the original stripshaped MnS inclusions and Al_(2)O_(3)inclusions with sharp angles are modified into the fine spherical rare earth(RE)inclusions with small average size,which are mainly RE oxysulfides after adding appropriate amount of mischmetal(48.9 wt%Ce-42 wt%La-5 wt%Nd-Fe)into the Cu-P weathering steel.In the environment containing Cl^(-),the pitting corrosion in RE weathering steel is induced by the preferential dissolution of RE inclusions in that the RE inclusions have a more negative potential than steel matrix at the initial corrosion stage.With the increase of corrosion time,the driving force of pitting expansion is weakened as a re sult of the continuous dissolution of RE inclusions,which makes the pitting tend to propagate horizontally around the RE inclusions.Once the RE inclusions completely dissolve,the open corrosion pits with shallow depth are formed in steel.The dispersed pitting pits with small size and shallow depth induced by RE inclusions are conducive to the formation of uniform and dense corrosion products layer on the steel surface,which reveals that the addition of RE can improve the corrosion resistance of weathering steels.展开更多
Comprehensive research methods such as literature research,theoretical analysis,numerical simulations and field monitoring have been used to analyze the disasters and characteristics caused by the linkage failure and ...Comprehensive research methods such as literature research,theoretical analysis,numerical simulations and field monitoring have been used to analyze the disasters and characteristics caused by the linkage failure and instability of the residual coal pillars-rock strata in multi-seam mining.The effective monitoring area and monitoring design method of linkage instability of residual coal pillar-rock strata in multi-seam mining have been identified.The evaluation index and the risk assessment method of disaster risk have been established and the project cases have been applied and validated.The results show that:①The coal pillar will not only cause disaster in singleseam mining,but also more easily cause disaster in multi-seam mining.The instability of coal pillars can cause not only dynamical disasters such as rock falls and mine earthquakes,but also cause surface subsidence and other disasters.②When monitoring the linkage instability of residual coal pillar-rock strata,it is not only necessary to consider the monitoring of the apply load body(key block),the transition body(residual coal pillar)and the carrier body(interlayer rock and working face),but also to strengthen the monitoring of the fracture development height(linkage body).③According to the principles of objectivity,easy access and quantification,combined with investigation,analysis,and production and geological characteristics of this mining area,the main evaluation indexes of the degree of disaster caused by linkage instability of residual coal pillar-rock strata are determined as:microseismic energy,residual coal pillar damage degree,fracture development height.And the evaluation index classification table was also given.④According to the measured value of the evaluation index,the fuzzy comprehensive evaluation method was used to calculate the disaster risk degree in the studied mine belongs to class III,that is,medium risk level.The corresponding pressure relief technology was adopted on site,which achieved a good control effect,and also verified the accuracy and effectiveness of the risk evaluation results.展开更多
基金supported by the National Natural Science Foundation of China(Nos.51474137,and 51574154)Shandong Province Natural Science Fund(No.ZR201709180101)+1 种基金Tai’shan Scholar Engineering Construction Fund of Shandong Province of ChinaPostgraduate Technology Innovation Project of Shandong University of Science and Technology(No.SDKDYC 180103).
文摘This study mainly investigates the mechanical mechanism of overlying strata breaking and the development of fractured zones during close-distance coal seam group mining in the Gaojialiang coal mine.First,a mechanical model for the second"activation"of broken overlying strata is established,and the related mechanical"activation"conditions are obtained.A recursive formula for calculating the separation distance of overlying strata is deduced.Second,a height determining method for predicting the height of fractured zones during close-distance coal seam group mining is proposed based on two values,namely,the separation distance and ultimate subsidence value of overlying strata.This method is applied to calculate the fractured zone heights in nos.20107 and 20307 mining faces.The calculated results are almost equal to the field observation results.Third,a modified formula for calculating the height of a waterflowing fractured zone is proposed.A comparison of the calculated and observed results shows that the errors are small.The height determining method and modified formula not only build a theoretical foundation for water conservation mining at the Gaojialiang coal mine,but also provide a reference for estimating the height of water-flowing fractured zones in other coal mines with similar conditions.
基金supported by the Climbling Project of Taishan Scholar in Shandong Province (No.tspd20210313)National Natural Science Foundation of China (Grant No.51874190,52079068,41941019,52090081 and 52074168)+3 种基金Taishan Scholar in Shandong Province (No.tsqn202211150)Outstanding Youth Fund Project in Shandong Province (No.ZQ2022YQ49)the State Key Laboratory of Hydroscience and Engineering,China (No.2021-KY-04)support from the G.Albert Shoemaker endowment.
文摘Multi-seam mining often leads to the retention of a significant number of coal pillars for purposes such as protection,safety,or water isolation.However,stress concentration beneath these residual coal pillars can significantly impact their strength and stability when mining below them,potentially leading to hydraulic support failure,surface subsidence,and rock bursting.To address this issue,the linkage between the failure and instability of residual coal pillars and rock strata during multi-seam mining is examined in this study.Key controls include residual pillar spalling,safety factor(f.),local mine stiffness(LMS),and the post-peak stiffness(k)of the residual coal pillar.Limits separating the two forms of failure,progressive versus dynamic,are defined.Progressive failure results at lower stresses when the coal pillar transitions from indefinitely stable(f,>1.5)to failing(f,<1.5)when the coal pillar can no longer remain stable for an extended duration,whereas sud-den(unstable)failure results when the strength of the pillar is further degraded and fails.The transition in mode of failure is defined by the LMS/k ratio.Failure transitions from quiescent to dynamic as LMS/k.<1,which can cause chain pillar instability propagating throughout the mine.This study provides theoretical guidance to define this limit to instability of residual coal pillars for multi-seam mining in similar mines.
基金supported by the National Natural Science Foundation of China(52174122,52074168)Excellent Youth Fund of Shandong Natural Science Foundation(ZR2022YQ49)+1 种基金Climbing Project of Taishan Scholar in Shandong Province(tspd20210313)Young Expert of Taishan Scholar Project in Shandong Province(tsqn202211150).
文摘Rheological mechanical properties of the soft rock are afected signifcantly by its main physical characteristics-clay mineral.In this study,taking the mudstone on the roof and foor in four typical mining regions as the research object,frstly,the clay mineral characteristic was analyzed by the X-ray difraction test.Subsequently,rheological mechanical properties of mudstone samples under diferent confning pressures are studied through triaxial compression and creep tests.The results show that the clay mineral content of mudstone in diferent regions is diferent,which leads to signifcant diferences in its rheological properties,and these diferences have a good correlation with the content of montmorillonite and illite-montmorillonite mixed layer.Taking the montmorillonite content as an example,compared with the sample with 3.56%under the lower stress level,the initial creep deformation of the sample with 11.19%increased by 3.25 times,the viscosity coefcient and longterm strength decreased by 80.59%and 53.94%,respectively.Furthermore,based on the test results,the damage variation is constructed considering the montmorillonite content and stress level,and the M–S creep damage constitutive model of soft rock is established.Finally,the test results can be ftted with determination coefcients ranging from 0.9020 to 0.9741,which proves that the constitutive relation can refect the infuence of the clay mineral content in the samples preferably.This study has an important reference for revealing the long-term stability control mechanism of soft rock roadway rich in clay minerals.
基金financial support from the National Key R&D Program of China(No.2018YFC0604703)National Natural Science Foundation of China(Nos.51804181,51874190,and 52074168)Key R&D Program of Shandong Province(No.2019GSF111020)。
文摘Large and super-large section chamber groups in coal mines are frequently affected by dynamic loads resulting from production activities such as roadway driving and blasting.The stability of the surrounding rock is poor,and it is difficult to control.In this paper,a similar simulation test was used to study the deformation and evolution laws of the surrounding rock of a triangle-shaped chamber group under different dynamic loads.The results showed that under dynamic loading,the vertical stress of the surrounding rock of the chamber group increased in an oscillatory form.The maximum stress concentration coefficient reached 4.09.The damage degree of the roof was greater than that of the two sides.The deformation of the roof was approximately 1.2 times that of the two sides.For the chamber closer to the power source,the stress oscillation amplitude of the surrounding rock was larger,and the failure was more serious.The force of the anchorage structure showed a phased increasing characteristic;additionally,the force of the anchorage structure on the adjacent side of the chambers was greater than that on the other side.This study reveals the deformation and failure evolution laws of the surrounding rock of large section chamber groups under dynamic loading.
基金The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China(Nos.52174122,52074168 and 51874190)Climbing Project of Taishan Scholar in Shandong Province(No.tspd20210313).
文摘The stress concentration and failure at chamber intersections in coal mine are intense,especially in deepburied,super-large section conditions.In this paper,the plastic radius of super-large section chamber under unequal pressure was corrected on the basis of the size effect.Then,stress and failure evolution of intersections under different crossing angles and equivalent angular bisectors were revealed.Furthermore,2 trajectory curves of failure and stress were analytically expressed,which divided the intersection into 5 influencing zones in the light of stress superposition degree.After determining instability trigger point and instability path,instability energy criterion of intersection can be obtained as K>1,which means that the external energy is greater than the sum of energy consumed by surrounding rock instability and supporting structure failure.Taking coal-gangue separation system of Longgu Coal Mine as example,it was found that there was instability risk under original parameters.For long-term stability,an optimization design method was proposed by considering safety factor,and optimal support scheme was obtained.Field monitoring showed intersections deformations were relatively small with the maximum of 125 mm,which verified the rationality of theoretical analysis.This study provides guidance for the stability control of the intersections under the same or similar conditions.
基金Project supported by the National Key Research and Development Program of China(2018YFC0604703)。
文摘The weathering steels are prone to pitting corrosion in an environment containing chloride ions.The pitting behavior of Cu-P-RE weathering steels and its effect on the corrosion resistance of steels were investigated by multifarious analytical techniques,such as field emission-scanning electron microscopy(FE-SEM),electron probe microanalysis(EPMA),scanning Kelvin probe force microscopy(SKPFM),electrochemical workstation and a series of immersion tests.The results show that the original stripshaped MnS inclusions and Al_(2)O_(3)inclusions with sharp angles are modified into the fine spherical rare earth(RE)inclusions with small average size,which are mainly RE oxysulfides after adding appropriate amount of mischmetal(48.9 wt%Ce-42 wt%La-5 wt%Nd-Fe)into the Cu-P weathering steel.In the environment containing Cl^(-),the pitting corrosion in RE weathering steel is induced by the preferential dissolution of RE inclusions in that the RE inclusions have a more negative potential than steel matrix at the initial corrosion stage.With the increase of corrosion time,the driving force of pitting expansion is weakened as a re sult of the continuous dissolution of RE inclusions,which makes the pitting tend to propagate horizontally around the RE inclusions.Once the RE inclusions completely dissolve,the open corrosion pits with shallow depth are formed in steel.The dispersed pitting pits with small size and shallow depth induced by RE inclusions are conducive to the formation of uniform and dense corrosion products layer on the steel surface,which reveals that the addition of RE can improve the corrosion resistance of weathering steels.
基金the financial support by the National Natural Science Foundation of China(Nos.52304093,52074168,52079068,41941019)Shandong Province Key Research and Development Program(No.2019SDZY02)+4 种基金Shandong Taishan Scholars Climbing Program(No.tspd20210313)State Key Laboratory of Hydroscience and Engineering foundation(No.2021-KY-04)Natural Science Foundation of Shandong Province Outstanding Youth Fund project(No.ZQ2022YQ49)the Taishan Scholars Project Special Fund(No.tsqn202211150)the Anhui Engineering Research Center of Exploitation and Utilization of Closed/Abandoned Mine Resources(No.EUCMR202205).
文摘Comprehensive research methods such as literature research,theoretical analysis,numerical simulations and field monitoring have been used to analyze the disasters and characteristics caused by the linkage failure and instability of the residual coal pillars-rock strata in multi-seam mining.The effective monitoring area and monitoring design method of linkage instability of residual coal pillar-rock strata in multi-seam mining have been identified.The evaluation index and the risk assessment method of disaster risk have been established and the project cases have been applied and validated.The results show that:①The coal pillar will not only cause disaster in singleseam mining,but also more easily cause disaster in multi-seam mining.The instability of coal pillars can cause not only dynamical disasters such as rock falls and mine earthquakes,but also cause surface subsidence and other disasters.②When monitoring the linkage instability of residual coal pillar-rock strata,it is not only necessary to consider the monitoring of the apply load body(key block),the transition body(residual coal pillar)and the carrier body(interlayer rock and working face),but also to strengthen the monitoring of the fracture development height(linkage body).③According to the principles of objectivity,easy access and quantification,combined with investigation,analysis,and production and geological characteristics of this mining area,the main evaluation indexes of the degree of disaster caused by linkage instability of residual coal pillar-rock strata are determined as:microseismic energy,residual coal pillar damage degree,fracture development height.And the evaluation index classification table was also given.④According to the measured value of the evaluation index,the fuzzy comprehensive evaluation method was used to calculate the disaster risk degree in the studied mine belongs to class III,that is,medium risk level.The corresponding pressure relief technology was adopted on site,which achieved a good control effect,and also verified the accuracy and effectiveness of the risk evaluation results.
