For expedited transportation,vehicular tunnels are often designed as two adjacent tunnels,which frequently experience dynamic stress waves from various orientations during blasting excavation.To analyze the impact of ...For expedited transportation,vehicular tunnels are often designed as two adjacent tunnels,which frequently experience dynamic stress waves from various orientations during blasting excavation.To analyze the impact of dynamic loading orientation on the stability of the twin-tunnel,a split Hopkinson pressure bar(SHPB)apparatus was used to conduct a dynamic test on the twin-tunnel specimens.The two tunnels were rotated around the specimen’s center to consider the effect of dynamic loading orientation.LS-DYNA software was used for numerical simulation to reveal the failure properties and stress wave propagation law of the twin-tunnel specimens.The findings indicate that,for a twin-tunnel exposed to a dynamic load from different orientations,the crack initiation position appears most often at the tunnel corner,tunnel spandrel,and tunnel floor.As the impact direction is created by a certain angle(30°,45°,60°,120°,135°,and 150°),the fractures are produced in the middle of the line between the left tunnel corner and the right tunnel spandrel.As the impact loading angle(a)is 90°,the tunnel sustains minimal damage,and only tensile fractures form in the surrounding rocks.The orientation of the impact load could change the stress distribution in the twin-tunnel,and major fractures are more likely to form in areas where the tensile stress is concentrated.展开更多
Stress waves affect the stress field at the crack tip and dominate the dynamic crack propagation.Therefore,evaluating the influence of blasting stress waves on the crack propagation behavior and the mechanical charact...Stress waves affect the stress field at the crack tip and dominate the dynamic crack propagation.Therefore,evaluating the influence of blasting stress waves on the crack propagation behavior and the mechanical characteristics of crack propagation is of great significance for engineering blasting.In this study,ANSYS/LS-DYNA was used for blasting numerical simulation,in which the propagation characteristics of blasting stress waves and stress field distribution at the crack tip were closely observed.Moreover,ABAQUS was applied for simulating the crack propagation path and calculating dynamic stress intensity factors(DSIFs).The universal function was calculated by the fractalmethod.The results show that:the compressive wave causes the crack to close and the reflected tensile wave drives the crack to initiate and propagate,and failure mode is mainly tensile failure.The crack propagation velocity varies with time,which increases at first and then decreases,and the crack arrest occurs due to the attenuation of stress waves and dissipation of the blasting energy.In addition,crack arrest toughness is smaller than the crack initiation toughness,applied pressure waveforms(such as the peak pressure,duration,waveforms,wavelengths and loading rates)have a great influence on DSIFs.It is conducive to our deep understanding or the study of blasting stress waves dominated fracture,suggesting a broad reference for the further development of rock blasting in engineering practice.展开更多
Tunnels in fractured rock masses are typically damaged by dynamic disturbances from various directions.To investigate the influence of blasting load directions on the stability of a tunnel with a precrack nearby,blast...Tunnels in fractured rock masses are typically damaged by dynamic disturbances from various directions.To investigate the influence of blasting load directions on the stability of a tunnel with a precrack nearby,blasting tests were conducted on the physical models of an external crack around a tunnel(ECT)in this study.Failure modes of the tunnels were analysed based on stress wave theory.The Riedel-Hiermaier-Thoma(RHT)material model was employed to perform the numerical simulations on ECT models.Stress distribution around the tunnels and final failure patterns of the tunnels were characterised.The results show that,under blasting loads,the pre-crack propagates and then new cracks initiates on the incident side of the tunnel.These cracks extend towards each other and eventually coalesce.Blasting load directions significantly influence the ultimate failure mode of the tunnel in the fractured rock masses.The new cracks on the shadow side of the tunnel appear at different positions when the blasting stress waves come from various directions.The results are meaningful to the analysis of tunnel stability and optimisation of the tunnel support scheme.展开更多
Crack dynamic propagation and arrest behaviors have received extensive attention over the years.However,there still remain many questions,e.g.under what conditions will a running crack come to arrest?In this paper,dro...Crack dynamic propagation and arrest behaviors have received extensive attention over the years.However,there still remain many questions,e.g.under what conditions will a running crack come to arrest?In this paper,drop weight impact(DWI)tests were conducted to investigate crack arrest mechanism using single cleavage triangle(SCT)rock specimens.Green sandstone was selected to prepare the SCT specimens.Dynamic stress intensity factors(DSIFs)were calculated by ABAQUS code,and the critical DSIFs were determined by crack propagation speeds and fracture time measured by crack propagation gauges(CPGs).The test results show that the critical DSIF at propagation decreases with crack propagation speed.Numerical simulation for SCT specimens under different loading waves was performed using AUTODYN code.The reflected compressive wave from the incident and transmitted plates can induce crack arrests during propagation,and the number of arrest times increases with the wave length.In order to eliminate the effect of the incident and transmitted plates,models consisting of only one SCT specimen without incident and transmitted plates were established,and the same trapezoid-shaped loading wave was applied to the SCT specimen.The results show that for the SCT specimen with transmitted boundary(analogous to an infinite plate),the trapezoid-shaped loading wave cannot induce crack arrest anymore.The numerical results can well describe the occurrence of crack arrest in the experiments.展开更多
Three-dimensional rock fracture induced by blasting is a highly complex problem and has received considerable attention in geotechnical engineering.The material point method is firstly applied to treat this challengin...Three-dimensional rock fracture induced by blasting is a highly complex problem and has received considerable attention in geotechnical engineering.The material point method is firstly applied to treat this challenging task.Some inherent weaknesses can be overcome by coupling the generalized interpolation material point(GIMP)and the convected particle domain interpolation technique(CPDI).For the media in the borehole,unchanged GIMP-type particles are used to guarantee a homogenous blast pressure.CPDITetrahedron type particles are employed to avoid the fake numerical fracture near the borehole for the rock material.A blasting experiment using three-dimensional single-borehole rock was simulated to examine the applicability of the coupled model under realistic loading and boundary conditions.A good agreement was achieved between the simulation and experimental results.Moreover,the mechanism of three-dimensional rock fracture was analyzed.It was concluded that rock particle size and material parameters play an important role in rock damage.The reflected tensile waves cause severe damage in the lower part of the model.Rayleigh waves occur on the top face of the rock model to induce a hoop failure band.展开更多
Cracked straight-through Brazilian disc(CSTBD) samples prepared using two rock materials were used for thermal treatment from room temperature to 700℃. Uniaxial splitting experiments were performed using an automatic...Cracked straight-through Brazilian disc(CSTBD) samples prepared using two rock materials were used for thermal treatment from room temperature to 700℃. Uniaxial splitting experiments were performed using an automatic electro-hydraulic servo press to study the evolution laws of physical and fracture properties of different deep rock materials under high-temperature geological conditions. The fracture characteristics were measured using an industrial camera and digital image correlation technology to analyze the effect of high temperature on fracture properties and failure modes of the CSTBD samples after different thermal treatments. The micro-damage properties of green sandstone and granite materials were obtained using a scanning electron microscope(SEM). The following conclusions were drawn from the test results:(1) With the increasing temperature, the fracture characteristics of green sandstone and granite change from brittle fracture to plasticity fracture, the longitudinal wave velocity of granite decreases sharply at 600℃, and the damage factor reaches 0.8748 at 700℃.(2) The fracture toughness of green sandstone and granite decreases with increasing temperature;however, the decreasing range of granite is larger than that of green sandstone.(3) As the temperature increases, the fracture morphologies of green sandstone and granite materials become rougher, whereas thermal damage cracks of granite and intergranular fractures inside sandstone as well as pores of sandstone increase.(4) The crack tip opening displacement and peak strain corresponding to peak load increase with the temperature.展开更多
The tensile-shear interactive damage(TSID)model is a novel and powerful constitutive model for rock-like materials.This study proposes a methodology to calibrate the TSID model parameters to simulate sandstone.The bas...The tensile-shear interactive damage(TSID)model is a novel and powerful constitutive model for rock-like materials.This study proposes a methodology to calibrate the TSID model parameters to simulate sandstone.The basic parameters of sandstone are determined through a series of static and dynamic tests,including uniaxial compression,Brazilian disc,triaxial compression under varying confining pressures,hydrostatic compression,and dynamic compression and tensile tests with a split Hopkinson pressure bar.Based on the sandstone test results from this study and previous research,a step-by-step procedure for parameter calibration is outlined,which accounts for the categories of the strength surface,equation of state(EOS),strain rate effect,and damage.The calibrated parameters are verified through numerical tests that correspond to the experimental loading conditions.Consistency between numerical results and experimental data indicates the precision and reliability of the calibrated parameters.The methodology presented in this study is scientifically sound,straightforward,and essential for improving the TSID model.Furthermore,it has the potential to contribute to other rock constitutive models,particularly new user-defined models.展开更多
Rock structures are often subjected to dynamic loads,such as blasts,impacts and earthquakes,and their loading rates differ largely.To investigate the effect of loading rates on the dynamic behavior of crack propagatio...Rock structures are often subjected to dynamic loads,such as blasts,impacts and earthquakes,and their loading rates differ largely.To investigate the effect of loading rates on the dynamic behavior of crack propagation,impact tests were conducted on large single-cleavage semicircle compression(LSCSC)specimens using a drop weight impact test system.Five types of rock materials were selected to prepare the LSCSC specimens,and crack propagation gauges were mounted along the crack propagation paths to measure crack initiation time and propagation speeds.Finite element models were established by using ABAQUS code,and the dynamic stress intensity factors(SIFs)were calculated.The curves of dynamic SIFs versus time were obtained,and the initiation toughness was determined by using these curves and the initiation time measured in the impact tests.The results show that loading rate has a significant effect on crack propagation behavior,and both the crack propagation speed and initiation toughness increase with the loading rate,whereas the delayed fracture time decreases with the increase in loading rate.展开更多
A simultaneous experimental and numerical study of shear fracture of concrete-like materials is carried out using Brazilian disc specimens with initial double edge cracks and fourpoint bending beam specimens with doub...A simultaneous experimental and numerical study of shear fracture of concrete-like materials is carried out using Brazilian disc specimens with initial double edge cracks and fourpoint bending beam specimens with double edge-notches.The interference effects of two cracks/notches are investigated through varied ligament angles and crack lengths.It is shown that shear fracturing paths change remarkably with the initial ligament angles and crack lengths.The cracked specimens are numerically simulated by an indirect boundary element method.A comparison between the numerical results and the experimental ones shows good agreement.展开更多
Dynamic fractures occur frequently in geophysical processes and engineering applications.It is thus essential to study crack and failure behaviors,such as crack time-to-initiation,crack growth rate and arrest period u...Dynamic fractures occur frequently in geophysical processes and engineering applications.It is thus essential to study crack and failure behaviors,such as crack time-to-initiation,crack growth rate and arrest period under dynamic loading.In this study,impact experiments were implemented by utilizing the single-flawed tunnel specimens under drop-hammer impacts.Four brittle materials,i.e.,green sandstone,red sandstone,black sandstone and polymethyl methacrylate,were selected to make single-flawed tunnel specimens.Strain gauges and crack extension gauges were employed to measure the crack extension parameters.The properties of crack growth rate,crack time-to-initiation and arrest period of these four brittle materials were discussed and analyzed.The corresponding numerical simulation was performed by using the commercial software AUTODYN.The numerical results of crack growth rate and crack time-to-initiation agreed with the impact test results.The commercial software ABAQUS was applied to compute the dynamic stress intensity factors.The results show that both the dynamic initiation fracture toughness and the crack growth rate increase with the elastic moduli of these four types of brittle materials under the same loading conditions,whereas the crack time-to-initiation decreases with the increase in elastic moduli of the brittle materials under the same loading conditions.展开更多
This paper studied the rock dynamic fracture propagation under impact loads elaborately with a determination method proposed to calculate crack propagation dynamic stress intensity factor(DSIF).By utilizing the split-...This paper studied the rock dynamic fracture propagation under impact loads elaborately with a determination method proposed to calculate crack propagation dynamic stress intensity factor(DSIF).By utilizing the split-Hopkinson pressure bar,the impact experiments with an improved single cleavage semi-circle(ISCSC)specimen were conducted to illuminate the dynamic crack propagation behaviour.Meanwhile,the fracture characteristics and crack propagation velocity were obtained by the crack propagation gauges.Coordinating experiments with a numerical approach,the crack propagation dynamic stress intensity factors were calculated by an experimental—numerical method with fractal theory.Then,a finite difference model was developed based on the tensile fracture softening damage criterion.With the analysis of numerical and experimental results,the crack propagation behaviour and mechanism of crack arrest were discussed sophisticatedly.The results demonstrate that the novel ISCSC specimen shows a definite advantage in determining crack propagation and arrest DSIF.Additionally,the crack arrest DSIF is larger than the average propagation DSIF with a sharp increase.Meanwhile,the numerical simulation results which agree well with the actual crack propagation illustrate that the crack arrest should be dominated by the compressive stress perpendicular to the crack path,and there were several arrest pauses existing in the transitory crack arrest process.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.52204104 and U19A2098)the Science and Technology Department of Sichuan Province,China(Grant No.2023YFH0022).
文摘For expedited transportation,vehicular tunnels are often designed as two adjacent tunnels,which frequently experience dynamic stress waves from various orientations during blasting excavation.To analyze the impact of dynamic loading orientation on the stability of the twin-tunnel,a split Hopkinson pressure bar(SHPB)apparatus was used to conduct a dynamic test on the twin-tunnel specimens.The two tunnels were rotated around the specimen’s center to consider the effect of dynamic loading orientation.LS-DYNA software was used for numerical simulation to reveal the failure properties and stress wave propagation law of the twin-tunnel specimens.The findings indicate that,for a twin-tunnel exposed to a dynamic load from different orientations,the crack initiation position appears most often at the tunnel corner,tunnel spandrel,and tunnel floor.As the impact direction is created by a certain angle(30°,45°,60°,120°,135°,and 150°),the fractures are produced in the middle of the line between the left tunnel corner and the right tunnel spandrel.As the impact loading angle(a)is 90°,the tunnel sustains minimal damage,and only tensile fractures form in the surrounding rocks.The orientation of the impact load could change the stress distribution in the twin-tunnel,and major fractures are more likely to form in areas where the tensile stress is concentrated.
基金This researchwas supported by the National Natural Science Foundation of China(No.52227805)the Fundamental Research Funds for Central Universities(No.2022JCCXLJ01).Awards were granted to the author Liyun Yang.
文摘Stress waves affect the stress field at the crack tip and dominate the dynamic crack propagation.Therefore,evaluating the influence of blasting stress waves on the crack propagation behavior and the mechanical characteristics of crack propagation is of great significance for engineering blasting.In this study,ANSYS/LS-DYNA was used for blasting numerical simulation,in which the propagation characteristics of blasting stress waves and stress field distribution at the crack tip were closely observed.Moreover,ABAQUS was applied for simulating the crack propagation path and calculating dynamic stress intensity factors(DSIFs).The universal function was calculated by the fractalmethod.The results show that:the compressive wave causes the crack to close and the reflected tensile wave drives the crack to initiate and propagate,and failure mode is mainly tensile failure.The crack propagation velocity varies with time,which increases at first and then decreases,and the crack arrest occurs due to the attenuation of stress waves and dissipation of the blasting energy.In addition,crack arrest toughness is smaller than the crack initiation toughness,applied pressure waveforms(such as the peak pressure,duration,waveforms,wavelengths and loading rates)have a great influence on DSIFs.It is conducive to our deep understanding or the study of blasting stress waves dominated fracture,suggesting a broad reference for the further development of rock blasting in engineering practice.
基金funded by the National Natural Science Foundation of China(Grant No.U19A2098)the open fund of MOE Key Laboratory of Deep Underground Science and Engineering(Grant No.DESEYU202101)the Sichuan Science and Technology Program(Grant No.2021YJ0511)。
文摘Tunnels in fractured rock masses are typically damaged by dynamic disturbances from various directions.To investigate the influence of blasting load directions on the stability of a tunnel with a precrack nearby,blasting tests were conducted on the physical models of an external crack around a tunnel(ECT)in this study.Failure modes of the tunnels were analysed based on stress wave theory.The Riedel-Hiermaier-Thoma(RHT)material model was employed to perform the numerical simulations on ECT models.Stress distribution around the tunnels and final failure patterns of the tunnels were characterised.The results show that,under blasting loads,the pre-crack propagates and then new cracks initiates on the incident side of the tunnel.These cracks extend towards each other and eventually coalesce.Blasting load directions significantly influence the ultimate failure mode of the tunnel in the fractured rock masses.The new cracks on the shadow side of the tunnel appear at different positions when the blasting stress waves come from various directions.The results are meaningful to the analysis of tunnel stability and optimisation of the tunnel support scheme.
基金This work was financially supported by the National Natural Science Foundation of China(Grant Nos.U19A2098,11672194 and 11702181)the Fundamental Research Funds for the Central Universities.
文摘Crack dynamic propagation and arrest behaviors have received extensive attention over the years.However,there still remain many questions,e.g.under what conditions will a running crack come to arrest?In this paper,drop weight impact(DWI)tests were conducted to investigate crack arrest mechanism using single cleavage triangle(SCT)rock specimens.Green sandstone was selected to prepare the SCT specimens.Dynamic stress intensity factors(DSIFs)were calculated by ABAQUS code,and the critical DSIFs were determined by crack propagation speeds and fracture time measured by crack propagation gauges(CPGs).The test results show that the critical DSIF at propagation decreases with crack propagation speed.Numerical simulation for SCT specimens under different loading waves was performed using AUTODYN code.The reflected compressive wave from the incident and transmitted plates can induce crack arrests during propagation,and the number of arrest times increases with the wave length.In order to eliminate the effect of the incident and transmitted plates,models consisting of only one SCT specimen without incident and transmitted plates were established,and the same trapezoid-shaped loading wave was applied to the SCT specimen.The results show that for the SCT specimen with transmitted boundary(analogous to an infinite plate),the trapezoid-shaped loading wave cannot induce crack arrest anymore.The numerical results can well describe the occurrence of crack arrest in the experiments.
基金This research was funded by the Natural Science Foundation of Sichuan,China(No.2022NSFSC1915)the National Natural Science Foundation of China(No.U19A2098)+1 种基金State Key Laboratory of Precision Blasting and Hubei Key Laboratory of Blasting Engineering,Jianghan University(No.PBSKL2022B06)the Fundamental Research Funds for the Central Universities。
文摘Three-dimensional rock fracture induced by blasting is a highly complex problem and has received considerable attention in geotechnical engineering.The material point method is firstly applied to treat this challenging task.Some inherent weaknesses can be overcome by coupling the generalized interpolation material point(GIMP)and the convected particle domain interpolation technique(CPDI).For the media in the borehole,unchanged GIMP-type particles are used to guarantee a homogenous blast pressure.CPDITetrahedron type particles are employed to avoid the fake numerical fracture near the borehole for the rock material.A blasting experiment using three-dimensional single-borehole rock was simulated to examine the applicability of the coupled model under realistic loading and boundary conditions.A good agreement was achieved between the simulation and experimental results.Moreover,the mechanism of three-dimensional rock fracture was analyzed.It was concluded that rock particle size and material parameters play an important role in rock damage.The reflected tensile waves cause severe damage in the lower part of the model.Rayleigh waves occur on the top face of the rock model to induce a hoop failure band.
基金funding support from the Sichuan Science and Technology Program (Grant No. 2021YJ0511)the State Key Laboratory for Geo-Mechanics and Deep Underground Engineering,China University of Mining&Technology (Grant No.SKLGDUEK2111)the Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province (Grant No. ZJRMG-2020-01)。
文摘Cracked straight-through Brazilian disc(CSTBD) samples prepared using two rock materials were used for thermal treatment from room temperature to 700℃. Uniaxial splitting experiments were performed using an automatic electro-hydraulic servo press to study the evolution laws of physical and fracture properties of different deep rock materials under high-temperature geological conditions. The fracture characteristics were measured using an industrial camera and digital image correlation technology to analyze the effect of high temperature on fracture properties and failure modes of the CSTBD samples after different thermal treatments. The micro-damage properties of green sandstone and granite materials were obtained using a scanning electron microscope(SEM). The following conclusions were drawn from the test results:(1) With the increasing temperature, the fracture characteristics of green sandstone and granite change from brittle fracture to plasticity fracture, the longitudinal wave velocity of granite decreases sharply at 600℃, and the damage factor reaches 0.8748 at 700℃.(2) The fracture toughness of green sandstone and granite decreases with increasing temperature;however, the decreasing range of granite is larger than that of green sandstone.(3) As the temperature increases, the fracture morphologies of green sandstone and granite materials become rougher, whereas thermal damage cracks of granite and intergranular fractures inside sandstone as well as pores of sandstone increase.(4) The crack tip opening displacement and peak strain corresponding to peak load increase with the temperature.
基金funded by the National Natural Science Foundation of China(Grant No.12272247)National Key Project(Grant No.GJXM92579)Major Research and Development Project of Metallurgical Corporation of China Ltd.in the Non-Steel Field(Grant No.2021-5).
文摘The tensile-shear interactive damage(TSID)model is a novel and powerful constitutive model for rock-like materials.This study proposes a methodology to calibrate the TSID model parameters to simulate sandstone.The basic parameters of sandstone are determined through a series of static and dynamic tests,including uniaxial compression,Brazilian disc,triaxial compression under varying confining pressures,hydrostatic compression,and dynamic compression and tensile tests with a split Hopkinson pressure bar.Based on the sandstone test results from this study and previous research,a step-by-step procedure for parameter calibration is outlined,which accounts for the categories of the strength surface,equation of state(EOS),strain rate effect,and damage.The calibrated parameters are verified through numerical tests that correspond to the experimental loading conditions.Consistency between numerical results and experimental data indicates the precision and reliability of the calibrated parameters.The methodology presented in this study is scientifically sound,straightforward,and essential for improving the TSID model.Furthermore,it has the potential to contribute to other rock constitutive models,particularly new user-defined models.
基金the National Natural Science Foundation of China(1167219411702181)+1 种基金by Sichuan Administration of Work Safety(aj20170515161307)the project of Science and Technology of Sichuan province(2018JZ0036).
文摘Rock structures are often subjected to dynamic loads,such as blasts,impacts and earthquakes,and their loading rates differ largely.To investigate the effect of loading rates on the dynamic behavior of crack propagation,impact tests were conducted on large single-cleavage semicircle compression(LSCSC)specimens using a drop weight impact test system.Five types of rock materials were selected to prepare the LSCSC specimens,and crack propagation gauges were mounted along the crack propagation paths to measure crack initiation time and propagation speeds.Finite element models were established by using ABAQUS code,and the dynamic stress intensity factors(SIFs)were calculated.The curves of dynamic SIFs versus time were obtained,and the initiation toughness was determined by using these curves and the initiation time measured in the impact tests.The results show that loading rate has a significant effect on crack propagation behavior,and both the crack propagation speed and initiation toughness increase with the loading rate,whereas the delayed fracture time decreases with the increase in loading rate.
基金Project supported by Iran's National Elites Foundation(INEF)Partial supports of center of excellent for structures and earthquake engineering at Sharif University of technology
文摘A simultaneous experimental and numerical study of shear fracture of concrete-like materials is carried out using Brazilian disc specimens with initial double edge cracks and fourpoint bending beam specimens with double edge-notches.The interference effects of two cracks/notches are investigated through varied ligament angles and crack lengths.It is shown that shear fracturing paths change remarkably with the initial ligament angles and crack lengths.The cracked specimens are numerically simulated by an indirect boundary element method.A comparison between the numerical results and the experimental ones shows good agreement.
基金This work was financially supported by the National Natural Science Foundation of China(11672194)Sichuan Administration of Work Safety(aj20170515161307)the Project of Science and Technology of Sichuan Province(2018JZ0036).
文摘Dynamic fractures occur frequently in geophysical processes and engineering applications.It is thus essential to study crack and failure behaviors,such as crack time-to-initiation,crack growth rate and arrest period under dynamic loading.In this study,impact experiments were implemented by utilizing the single-flawed tunnel specimens under drop-hammer impacts.Four brittle materials,i.e.,green sandstone,red sandstone,black sandstone and polymethyl methacrylate,were selected to make single-flawed tunnel specimens.Strain gauges and crack extension gauges were employed to measure the crack extension parameters.The properties of crack growth rate,crack time-to-initiation and arrest period of these four brittle materials were discussed and analyzed.The corresponding numerical simulation was performed by using the commercial software AUTODYN.The numerical results of crack growth rate and crack time-to-initiation agreed with the impact test results.The commercial software ABAQUS was applied to compute the dynamic stress intensity factors.The results show that both the dynamic initiation fracture toughness and the crack growth rate increase with the elastic moduli of these four types of brittle materials under the same loading conditions,whereas the crack time-to-initiation decreases with the increase in elastic moduli of the brittle materials under the same loading conditions.
基金the National Natural Science Foundation of China(Grant Nurmbers 11702181,11672194)the Sichuan Science and Technology Program(Grant Numbers 2019YFG0047).
文摘This paper studied the rock dynamic fracture propagation under impact loads elaborately with a determination method proposed to calculate crack propagation dynamic stress intensity factor(DSIF).By utilizing the split-Hopkinson pressure bar,the impact experiments with an improved single cleavage semi-circle(ISCSC)specimen were conducted to illuminate the dynamic crack propagation behaviour.Meanwhile,the fracture characteristics and crack propagation velocity were obtained by the crack propagation gauges.Coordinating experiments with a numerical approach,the crack propagation dynamic stress intensity factors were calculated by an experimental—numerical method with fractal theory.Then,a finite difference model was developed based on the tensile fracture softening damage criterion.With the analysis of numerical and experimental results,the crack propagation behaviour and mechanism of crack arrest were discussed sophisticatedly.The results demonstrate that the novel ISCSC specimen shows a definite advantage in determining crack propagation and arrest DSIF.Additionally,the crack arrest DSIF is larger than the average propagation DSIF with a sharp increase.Meanwhile,the numerical simulation results which agree well with the actual crack propagation illustrate that the crack arrest should be dominated by the compressive stress perpendicular to the crack path,and there were several arrest pauses existing in the transitory crack arrest process.
