This work described the preparation of easily colored meta-aramid(PMIA) copolymers from m-phenylenediamine(MPD),isophthaloyl dichloride(IPC), and 3,4′-oxydianiline(3,4′-ODA) via solution polycondensation in N,N-dime...This work described the preparation of easily colored meta-aramid(PMIA) copolymers from m-phenylenediamine(MPD),isophthaloyl dichloride(IPC), and 3,4′-oxydianiline(3,4′-ODA) via solution polycondensation in N,N-dimethylacetamide(DMAc). The novel co-PMIAs were obtained in relatively high inherent viscosities ranging from 1.32 dL/g to 2.53 dL/g, which could be easily cast into flexible films with high transparence or spun into fibers. All the newly synthesized copolymers possessed excellent thermal stabilities even better than that of commercial PMIA, with 5% weight loss temperatures higher than 430 °C in nitrogen measured by TGA and glass transition temperature of 267–277 °C measured by DSC. The cast films exhibited good mechanical properties with a tensile strength up to107 MPa and a tensile modulus up to 2.2 GPa. The resultant PMIAs also showed good solubility and better dye ability for cationic dyes.展开更多
The demand for high thermal stability and high strength agents is growing steadily as a result of their increasing application in advanced materials.A series of sulfonated poly(m-phenyleneisophthalamide)(SPMIA)copolym...The demand for high thermal stability and high strength agents is growing steadily as a result of their increasing application in advanced materials.A series of sulfonated poly(m-phenyleneisophthalamide)(SPMIA)copolymers with superior thermal stability and good mechanical properties have been prepared via low temperature polycondensation method.Then the structures of 5PMA copolymers with different content quantities of 2,4-diaminobenzenesulfonic acid(2,4-DABSA)were confimed by Fourier transform infrared(FTiR).Besides,their superior thermal properties were systematically investigated by differential canning calorimetry DSC),thermalgravimetreic analysis(TGA),and dynamic mechanical analysis(DMA).SPMA fbers were obtained by wet spinning using the resultant SPMIAsolutions.n addition,the obtained SPMIA fibers were proved to combine enhanced mechanical properties and unprecedented dyeability.Significantly,the SPMlA iber with great mechanical property,thermal stability,and dyeability shows great potential in easily dyeing high-performance protective fibers.展开更多
A series of Diels-Alder reaction cross-linked thermosets with recyclability and healability were prepared from furan-containing aromatic polyamide and bismaleimides with different chemical structures.The structures of...A series of Diels-Alder reaction cross-linked thermosets with recyclability and healability were prepared from furan-containing aromatic polyamide and bismaleimides with different chemical structures.The structures of synthesized bismaleimides were confirmed by 1 H nuclear magnetic resonance(1 H-NMR)spectroscopy;their reversible cross-linking with the furanic polyamide was further detected by 1 H-NMR technique and sol-gel transition behavior.The dynamic mechanical analysis and tensile test revealed the variable thermal and mechanical properties of thermosets cross-linked by different bismaleimides and with different molar ratios of maleimide group to furan group(Ima/fur).The tensile test also demonstrated that the better recyclability and solvent-assisted healability of thermosets cross-linked could be achieved by more flexible bismaleimides.This work is expected to provide valuable information for design of recyclable and healable high-performance thermosets with desired properties.展开更多
In this work, ultra-high molecular weight polyethylene (UHMWPE) microfiltration hollow fiber membranes prepared via the thermally induced phase separation (TIPS) method were modified by chemically bounding hydrophilic...In this work, ultra-high molecular weight polyethylene (UHMWPE) microfiltration hollow fiber membranes prepared via the thermally induced phase separation (TIPS) method were modified by chemically bounding hydrophilic silica (SiO2) nanoparticles onto the surface to improve anti-fouling performance. A range of testing techniques including attenuated total reflection Flourier transformed infrared spectroscopy(ATR-FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), water contact angle, mechanical test,filtration and anti-fouling performance were carried out to discuss the influence of different modification conditions on the properties of the membranes. The prepared hollow fiber membranes display the significantly excellent performance when the vinyl trimethoxy silane (VTMS) concentration was 13%, the pH value of the hydrolyzate was 4 and the hydrolysis reaction time was 6 h. In particular, the hydrophilicity of modified membranes was improved effectively, resulting in the enhancement of membrane anti-fouling properties. The results of this work can be consulted for improving the anti-fouling performance of the UHMWPE microfiltration hollow fiber membrane applied in the field of water purification.展开更多
基金financially supported by the National Natural Science Foundation of China(No.51473031)the Shanghai International S&T Cooperation Fund(No.16160731302)
文摘This work described the preparation of easily colored meta-aramid(PMIA) copolymers from m-phenylenediamine(MPD),isophthaloyl dichloride(IPC), and 3,4′-oxydianiline(3,4′-ODA) via solution polycondensation in N,N-dimethylacetamide(DMAc). The novel co-PMIAs were obtained in relatively high inherent viscosities ranging from 1.32 dL/g to 2.53 dL/g, which could be easily cast into flexible films with high transparence or spun into fibers. All the newly synthesized copolymers possessed excellent thermal stabilities even better than that of commercial PMIA, with 5% weight loss temperatures higher than 430 °C in nitrogen measured by TGA and glass transition temperature of 267–277 °C measured by DSC. The cast films exhibited good mechanical properties with a tensile strength up to107 MPa and a tensile modulus up to 2.2 GPa. The resultant PMIAs also showed good solubility and better dye ability for cationic dyes.
基金the Central Universities and Graduate Student Innovation Fund of Donghua University(No.CUSF-DHD-2019012)。
文摘The demand for high thermal stability and high strength agents is growing steadily as a result of their increasing application in advanced materials.A series of sulfonated poly(m-phenyleneisophthalamide)(SPMIA)copolymers with superior thermal stability and good mechanical properties have been prepared via low temperature polycondensation method.Then the structures of 5PMA copolymers with different content quantities of 2,4-diaminobenzenesulfonic acid(2,4-DABSA)were confimed by Fourier transform infrared(FTiR).Besides,their superior thermal properties were systematically investigated by differential canning calorimetry DSC),thermalgravimetreic analysis(TGA),and dynamic mechanical analysis(DMA).SPMA fbers were obtained by wet spinning using the resultant SPMIAsolutions.n addition,the obtained SPMIA fibers were proved to combine enhanced mechanical properties and unprecedented dyeability.Significantly,the SPMlA iber with great mechanical property,thermal stability,and dyeability shows great potential in easily dyeing high-performance protective fibers.
基金financially supported by the National Natural Science Foundation of China (No. 51473031)the Natural Science Foundation of Shanghai (No. 17ZR1401100)the doctoral innovation foundation (No. CUSF-DH-D-2017037)
文摘A series of Diels-Alder reaction cross-linked thermosets with recyclability and healability were prepared from furan-containing aromatic polyamide and bismaleimides with different chemical structures.The structures of synthesized bismaleimides were confirmed by 1 H nuclear magnetic resonance(1 H-NMR)spectroscopy;their reversible cross-linking with the furanic polyamide was further detected by 1 H-NMR technique and sol-gel transition behavior.The dynamic mechanical analysis and tensile test revealed the variable thermal and mechanical properties of thermosets cross-linked by different bismaleimides and with different molar ratios of maleimide group to furan group(Ima/fur).The tensile test also demonstrated that the better recyclability and solvent-assisted healability of thermosets cross-linked could be achieved by more flexible bismaleimides.This work is expected to provide valuable information for design of recyclable and healable high-performance thermosets with desired properties.
基金financially supported by the National Natural Science Foundation of China (No. 51473031)Shanghai International S&T Cooperation Fund (No. 16160731302)。
文摘In this work, ultra-high molecular weight polyethylene (UHMWPE) microfiltration hollow fiber membranes prepared via the thermally induced phase separation (TIPS) method were modified by chemically bounding hydrophilic silica (SiO2) nanoparticles onto the surface to improve anti-fouling performance. A range of testing techniques including attenuated total reflection Flourier transformed infrared spectroscopy(ATR-FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), water contact angle, mechanical test,filtration and anti-fouling performance were carried out to discuss the influence of different modification conditions on the properties of the membranes. The prepared hollow fiber membranes display the significantly excellent performance when the vinyl trimethoxy silane (VTMS) concentration was 13%, the pH value of the hydrolyzate was 4 and the hydrolysis reaction time was 6 h. In particular, the hydrophilicity of modified membranes was improved effectively, resulting in the enhancement of membrane anti-fouling properties. The results of this work can be consulted for improving the anti-fouling performance of the UHMWPE microfiltration hollow fiber membrane applied in the field of water purification.
