[Objective] This study aimed to analyze the volatile constituents in Lonicera japonica Thunb. from different origins. [Method] HP-5MS capillary columns were used and column temperature was controlled by a program. MS ...[Objective] This study aimed to analyze the volatile constituents in Lonicera japonica Thunb. from different origins. [Method] HP-5MS capillary columns were used and column temperature was controlled by a program. MS analysis was performed with EI and quadruple mass analyzer. The volatile constituents in L. japonica Thunb. were identified by NIST02 and Wiley275 libraries, and their relative contents were determined with chromatographic peak area normalization method. [Result] According to GC-MS total ion-current chromatograms, 35 volatile constituents were identified in L. japonica Thunb. from Guangxi Zhuang Autonomous Region, mainly including methyl linolenate, n-hexadecanoic acid and ζ-muurolene; 18 volatile constituents were identified in L. japonica Thunb. from Hunan Province, mainly including n-hexadecanoic acid, linoleic acid and α-curcumene. [Conclusion] Main volatile constituents in L. japonica Thunb. from two different origins varied significantly.展开更多
Processing method is one of the maln factors affecting the quality of hon-eysuckIe herbs, which is directIy reIated to economic benefits of farmers. This paper compares various processing methods of honeysuckIe to pro...Processing method is one of the maln factors affecting the quality of hon-eysuckIe herbs, which is directIy reIated to economic benefits of farmers. This paper compares various processing methods of honeysuckIe to provide some references for deveIoping a suitabIe processing procedure that can be used in Iarge-scale pro-duction and improve herb quality.展开更多
The factors that influence the colorimetric gene detection of gold label silver stain and improve the detection signals were studied. The influence of amino DNA probes and thiol DNA modified gold nanoparticles was inv...The factors that influence the colorimetric gene detection of gold label silver stain and improve the detection signals were studied. The influence of amino DNA probes and thiol DNA modified gold nanoparticles was investigated based on a sandwich hybridization system. An increase in amino probe concentration brought about an increase in hybridization signal which reached a threshold corresponding to the saturated concentration of amino probes bounded onto a glass slide surface. Since the steric hindrance effect of nanoparticles was dominant over the influence of a surface area, the bigger gold nanoparticles led to weaker hybridization signals. The hybridization efficiency enhanced significantly with the increase of the thiol DNA modified nanoparticle concentrations. Experimental results showed that 125 μmol/L of the amino DNA probe concentration, 15 nm of the gold nanoparticle diameter, and 4.07 nmol/L of the thiol DNA modified gold nanoparticle concentration were optimal for the detection system. The hybridization signals can be improved remarkably by choosing optimal hybridization conditions.展开更多
The occurrence periods of Semiaphis heraclei Takahashi,Frankliniella sp.,Haptonchus luteolus and Microsphara linicerae Enchson wint.in Rabenh.causing damage on Flos lonicerae were investigated in F.lonicerae planting ...The occurrence periods of Semiaphis heraclei Takahashi,Frankliniella sp.,Haptonchus luteolus and Microsphara linicerae Enchson wint.in Rabenh.causing damage on Flos lonicerae were investigated in F.lonicerae planting area in XinCheng county of Guangxi Province during 2008-2010,which were coincided with the occurrence periods of related phenology of local Prunus persica Rootstock.With P.persica Rootstock as indicator plant,the occurrence periods of three species of pests and one species of disease were predicted,respectively,and the method was simple and accurate,which could be the foundation for preventing these pests and diseases in the local field.展开更多
[Objective] The aim was to explore the effects of different factors on rapid propagation and seedling survival of Lonicera japonica Thunb. [Method] The cuttings of 1, 2 or 3 years old, with different length, were soak...[Objective] The aim was to explore the effects of different factors on rapid propagation and seedling survival of Lonicera japonica Thunb. [Method] The cuttings of 1, 2 or 3 years old, with different length, were soaked in different hormones at different concentrations for different time and planted at different dates. Finally, their rooting rate and survival rate in different treatments were measured and compared. [Result] The rooting rate and survival rate of one-year old cuttings with length of 10-13 cm and planted on September 20 and October 20, 2012 were relatively higher among all the treatments. Hormone treatment could significantly promote the callus formation and accelerate the rooting of the cuttings, and improve their survival rate. The cuttings treated with 120-200 mg/L ABT1 or NAA for 35-45 min had higher rooting rate and survival rate. Among them, the survival rate of cuttings treated with 160 mg/L ABT1 for 35 min was the highest, up to 92.5%. [Conclusion] The study provided basis for improving the survival rate of L. japonica by cuttage, and for optimizing the rapid propagation technique.展开更多
TiO2/γ-Al2O3 supported In/Ag catalysts were prepared by impregnation method,and investigated for NO reduction with CO as the reducing agent under lean burn conditions.The microscopic structure and surface properties ...TiO2/γ-Al2O3 supported In/Ag catalysts were prepared by impregnation method,and investigated for NO reduction with CO as the reducing agent under lean burn conditions.The microscopic structure and surface properties of the catalysts were studied by N2 adsorption-desorption,X-ray diffraction,transmission electron microscopy,X-ray photoelectron spectroscopy,ultraviolet-visible spectroscopy,H2 temperature-programmed reduction and Fourier transform infrared spectroscopy.TiO2/γ-Al2O3 supported In/Ag is a good catalyst for the reduction of NO to N2.It displayed high dispersion,large amounts of surface active components and high NO adsorption capacity,which gave good catalytic performance and stability for the reduction of NO with CO under lean burn conditions.The silver species stabilized and improved the dispersion of the indium species.The introduction of TiO2 into the γ-Al2O3 support promoted NO adsorption and improved the dispersion of the indium species and silver species.展开更多
The Ti-Al-Mo-V-Ag α＋β alloys were processed by powder metallurgy（PM） using the blended elemental（BE） technique.The effects of Ag addition and sintering temperature on microstructure and properties of the Ti-5Al...The Ti-Al-Mo-V-Ag α＋β alloys were processed by powder metallurgy（PM） using the blended elemental（BE） technique.The effects of Ag addition and sintering temperature on microstructure and properties of the Ti-5Al-4Mo-4V alloys were investigated using X-ray diffraction,optical microscope,scanning electron microscope and mechanical properties tests.The results show that adding Ag element increases the relative density and improves the mechanical properties of PM Ti-5Al-4Mo-4V alloy.After sintering at 1 250 ℃ for 4 h,the relative density and compression strength of Ti-5Al-4Mo-4V-5Ag alloy are 96.3% and 1 656 MPa,respectively.展开更多
The fabrication of a new type of one-dimensional Au-Ag porous nanotube（NPT） structure was presented based on a facile combination of nanocrystal growth and surface modification.Ag nanowires with various diameters we...The fabrication of a new type of one-dimensional Au-Ag porous nanotube（NPT） structure was presented based on a facile combination of nanocrystal growth and surface modification.Ag nanowires with various diameters were firstly served as the chemical plating templates via a polyol-process.Then,one-dimensional（1D） Au-Ag porous nanostructures with tailored structural features could be prepared by controlling the individual steps involved in this process,such as nanowire growth,surface modification,thermal diffusion,and dealloying.Structural characterizations reveal these Au-Ag porous nanotubes,non-porous nanotubes and porous nanowires possess novel nano-architectures with multimodal open porosity and excellent structural continuity and integrity,which make them particularly desirable as novel 1D nanocarriers for biomedical,drug delivery and sensing applications.展开更多
AIM： To observe the effects of traditional antiinflammatory medicine Lonicerae FIos （LF） on rat reflux esophagitis （RE） induced by pylorus and forestomach ligation compared with the well-known proton antioxidant,...AIM： To observe the effects of traditional antiinflammatory medicine Lonicerae FIos （LF） on rat reflux esophagitis （RE） induced by pylorus and forestomach ligation compared with the well-known proton antioxidant, α-tocopherol. METHODS： Rats were pretreated with three different dosages of LF （500, 250 and 125 mg/kg） orally, once a day for 14 d before pylorus and forestomach ligation. Nine hours after pylorus and forestomach ligation, changes to the stomach and esophagus lesion areas, gastric volumes, acid and pepsin outputs, antioxidant effects, esophageal lipid peroxidation, superoxide dismutase （SOD）, catalase （CAT）, malondialdehyde （MDA）, myeloperoxidase and glutathione （GSH） levels, and collagen contents （marker of flexibility） were observed on the esophageal and fundic histopathology. The results were compared with an α-tocopherol （once orally, 1 h before operation, 30 mg/kg） treated group in which the effects on RE were already confirmed.RESULTS： Pylorus and forestomach ligations caused marked increases of gross esophageal and gastric mucosa lesion areas, which corresponded with histopathological changes. In addition, increases of esophageal lipid peroxidation, decreases of SOD, CAT, and GSH-free radical scavengers, increases of collagen were observed. However, these pylorus and forestomach ligation induced RE were dose-dependently inhibited by treatment of 500, 250 and 125 mg/kg of LF extract, mediated by antioxidant effects. RE at 250 mg/kg showed similar effects α-tocopherol. CONCLUSION： The results suggest that antioxidant effects of LF could attenuate the severity of RE and prevent the esophageal mucosal damage, and validate its therapeutic use in esophageal reflux disease.展开更多
Flos Lonicerae is a medically useful traditional Chinese medicine herb. However, little is known about the antioxidant properties of Flos Lonicerae extracts. Here the antioxidant capacity of water, methanolic and etha...Flos Lonicerae is a medically useful traditional Chinese medicine herb. However, little is known about the antioxidant properties of Flos Lonicerae extracts. Here the antioxidant capacity of water, methanolic and ethanolic extracts prepared from Flos Lonicerae to scavenge 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical and reduce Fe3+ to Fe2+ is examined. Chlorogenic acid, a major component of Flos Lonicerae, is identified and further purified from 70% ethanolic extract with high performance liquid chromatography (HPLC) and its antioxidant capacity is characterized. The total phenolic compounds and chlorogenic acid con-tents in Flos Lonicerae are determined. The present results demonstrate that the Flos Lonicerae extracts exhibit antioxidant ac-tivity and chlorogenic acid is a major contributor to this activity.展开更多
As titanium alloy is chemically reactive,it is very difficult to join by conventional welding techniques.Titanium alloys can easily pick up nitrogen and oxygen from the atmosphere.In the fusion welding method,brittle ...As titanium alloy is chemically reactive,it is very difficult to join by conventional welding techniques.Titanium alloys can easily pick up nitrogen and oxygen from the atmosphere.In the fusion welding method,brittle intermetallic compounds are formed when joining titanium alloy and stainless steel,which decrease the mechanical behavior of the couples.Hence,for joining of titanium alloy,diffusion bonding is recommended.This work dealt with the measurement of feasible process parameters for diffusion bonding of Ti-6Al-4V and AISI 304 stainless steel with silver as an intermediate layer.The quality of the bonds was confirmed by the lap shear test and microstructural analysis.With the experimental results obtained,diffusion bonding windows were constructed and this will act as reference maps to identify the process parameters for obtaining defect free bond.Bonding was successful in the temperature range of 750-800 °C.Maximum lap shear strength was achieved under a bonding pressure of 5 MPa and holding time of 90 min.展开更多
The effects of Ag on the microstructure, mechanical properties, and electrical conductivity of AA2024 aluminum alloy coating were investigated. It was fabricated by friction surfacing as an additive manufacturing proc...The effects of Ag on the microstructure, mechanical properties, and electrical conductivity of AA2024 aluminum alloy coating were investigated. It was fabricated by friction surfacing as an additive manufacturing process. To carry out this investigation, Ag was added by 5.3, 10.6, and 16.0 wt.% to an AA2024 consumable rod by inserting holes in it. It was found that due to the strengthening by solid solution and the formation of precipitates and intermetallic containing Ag, the driving force for grain growth is reduced and consequently the grain size of the coating is decreased. After artificial aging heat treatment, the electrical conductivities of the coatings containing 0 and 16.0 wt.% Ag are increased by 4.15%(IACS) and decreased by 2.15%(IACS), respectively. While considering a linear relationship, it can be proposed that for a 1 wt.% Ag increase, the strength and hardness of the coating will be increased by 1.8% and 1.0%, respectively. It was established that the effect of Al6(Cu,Ag)Mg4 precipitate formation on strengthening is greater than that of Ag-rich intermetallic.展开更多
Au-Ag bimetallic nanoparticle‐supported microporous titanium silicalite‐1catalysts were prepared via a hydrothermal‐immersion method,and their structures were examined.These materials serve as efficient catalysts f...Au-Ag bimetallic nanoparticle‐supported microporous titanium silicalite‐1catalysts were prepared via a hydrothermal‐immersion method,and their structures were examined.These materials serve as efficient catalysts for the photosynthesis of propylene oxide via the epoxidation of propene.The Au/Ag mass ratio and reaction temperature were demonstrated to have significant effects on the catalytic activity and selectivity of propylene oxide.The optimal formation rate(68.3μmol/g·h)and selectivity(52.3%)toward propylene oxide were achieved with an Au:Ag mass ratio of4:1.Notably,the strong synergistic effect between Au and Ag resulted in superior photocatalysis of the bimetallic systems compared with those of the individual systems.A probable reaction mechanism was proposed based on the theoretical and experimental results.展开更多
This paper discusses the application of the model in predicting for hydrothermal Cu, Ag, Au and Pb-Zn occurrences in northwestern Yunnan. Geochemical, lineament and lithology data were the selected recognition criteri...This paper discusses the application of the model in predicting for hydrothermal Cu, Ag, Au and Pb-Zn occurrences in northwestern Yunnan. Geochemical, lineament and lithology data were the selected recognition criteria. The mentioned criteria varied against 75 known hydrothermal occurrences; the geochemical data had a weight of （W^＋= 1. 209 7, W^- =-0. 748 1） being the maximum among the three and the rest lineament and lithology have （W^＋= 0.7424, W^-= -0.449 6）, （W^＋= 0.378 7,W^-=-0.6243） respectively. The application was successful since the predicted results covers about 70% of the known deposits and predicted unknown areas.展开更多
To provide an accurate prediction of the product component dependence of temperature and pressure in vacuum distillation and give convenient and efficient guidance for the designing of the process parameters of indust...To provide an accurate prediction of the product component dependence of temperature and pressure in vacuum distillation and give convenient and efficient guidance for the designing of the process parameters of industrial production, according to the molecular interaction volume model(MIVM), the separation coefficient(β) and vapor-liquid equilibrium composition of Au-Ag alloy at different temperatures are calculated. Combined with the vapor-liquid equilibrium(VLE) theory, the VLE phase diagrams, including the temperature-composition(T-x) and pressure-composition(p-x) diagrams of Au-Ag alloy in vacuum distillation are plotted. The triple points and condensation temperatures of gold and silver vapors are calculated as well. The results show that the β decreases and the contents of gold in vapor phase increase with the distillation temperature increasing. Low pressures have positive effect on the separation of Ag and Au. The difference between the condensation temperatures of gold and silver is about 450 K in the pressure range of 1-10 Pa.展开更多
To enhance seamless source mobility support in the mobile NDN(Named Data Networking) environment,we propose a novel Locator Based Mobility support Approach,dubbed LBMA.In this approach,we assign a unique topologically...To enhance seamless source mobility support in the mobile NDN(Named Data Networking) environment,we propose a novel Locator Based Mobility support Approach,dubbed LBMA.In this approach,we assign a unique topologically layered locator to each AR(Access Route)in NDN network,and extend the AR with additional functionalities,such as caching and forwarding Interest packets on behalf of the source.Meanwhile,we add an optional field to the original NDN packet,and modify the Outgoing Interface(s) field in the AR's original FIB(Forwarding Information Base)entries,to record the mobility status and the current locator of the source.Specifically,the consumer in LBMA can continue the interrupted communication,without delivering Interest packets towards the old location of the source,nor waiting for all relevant devices completing the FIB entries updating.The performance analysis result indicates that LBMA has lower handoff cost and shorter handoff latency,compared with other existing source mobility support approaches.展开更多
基金Supported by Natural Science Foundation of Guangxi Zhuang Autonomous Region(2011GXNSFF018006)Special Fund for Bagui Scholar Project~~
文摘[Objective] This study aimed to analyze the volatile constituents in Lonicera japonica Thunb. from different origins. [Method] HP-5MS capillary columns were used and column temperature was controlled by a program. MS analysis was performed with EI and quadruple mass analyzer. The volatile constituents in L. japonica Thunb. were identified by NIST02 and Wiley275 libraries, and their relative contents were determined with chromatographic peak area normalization method. [Result] According to GC-MS total ion-current chromatograms, 35 volatile constituents were identified in L. japonica Thunb. from Guangxi Zhuang Autonomous Region, mainly including methyl linolenate, n-hexadecanoic acid and ζ-muurolene; 18 volatile constituents were identified in L. japonica Thunb. from Hunan Province, mainly including n-hexadecanoic acid, linoleic acid and α-curcumene. [Conclusion] Main volatile constituents in L. japonica Thunb. from two different origins varied significantly.
基金Supported by National Key Technology Research and Development Program during the12thFive-Year Plan Period(2011BAI06B01,2011BAC02B04)Special Fund for Traditional Chinese Medicine Scientific Research(201407002)+1 种基金Science and Technology Development Program of Shandong Province(2014GSF119018)Traditional Chinese Medicine Science and Technology Development Program of Shandong Province(2011Z-003-2)~~
文摘Processing method is one of the maln factors affecting the quality of hon-eysuckIe herbs, which is directIy reIated to economic benefits of farmers. This paper compares various processing methods of honeysuckIe to provide some references for deveIoping a suitabIe processing procedure that can be used in Iarge-scale pro-duction and improve herb quality.
文摘The factors that influence the colorimetric gene detection of gold label silver stain and improve the detection signals were studied. The influence of amino DNA probes and thiol DNA modified gold nanoparticles was investigated based on a sandwich hybridization system. An increase in amino probe concentration brought about an increase in hybridization signal which reached a threshold corresponding to the saturated concentration of amino probes bounded onto a glass slide surface. Since the steric hindrance effect of nanoparticles was dominant over the influence of a surface area, the bigger gold nanoparticles led to weaker hybridization signals. The hybridization efficiency enhanced significantly with the increase of the thiol DNA modified nanoparticle concentrations. Experimental results showed that 125 μmol/L of the amino DNA probe concentration, 15 nm of the gold nanoparticle diameter, and 4.07 nmol/L of the thiol DNA modified gold nanoparticle concentration were optimal for the detection system. The hybridization signals can be improved remarkably by choosing optimal hybridization conditions.
基金Supported by Natural Scientific Research Topics of Guangxi Scienceand Technology Department(GKG0992003B-40)Natural Scientific Research Topics of Guangxi Education Department(GJKY200809MS196)~~
文摘The occurrence periods of Semiaphis heraclei Takahashi,Frankliniella sp.,Haptonchus luteolus and Microsphara linicerae Enchson wint.in Rabenh.causing damage on Flos lonicerae were investigated in F.lonicerae planting area in XinCheng county of Guangxi Province during 2008-2010,which were coincided with the occurrence periods of related phenology of local Prunus persica Rootstock.With P.persica Rootstock as indicator plant,the occurrence periods of three species of pests and one species of disease were predicted,respectively,and the method was simple and accurate,which could be the foundation for preventing these pests and diseases in the local field.
基金Supported by the Science and Technology Program of Loudi City(3331118)the Science and Technology Program of Hunan Province(2011FJ3039)~~
文摘[Objective] The aim was to explore the effects of different factors on rapid propagation and seedling survival of Lonicera japonica Thunb. [Method] The cuttings of 1, 2 or 3 years old, with different length, were soaked in different hormones at different concentrations for different time and planted at different dates. Finally, their rooting rate and survival rate in different treatments were measured and compared. [Result] The rooting rate and survival rate of one-year old cuttings with length of 10-13 cm and planted on September 20 and October 20, 2012 were relatively higher among all the treatments. Hormone treatment could significantly promote the callus formation and accelerate the rooting of the cuttings, and improve their survival rate. The cuttings treated with 120-200 mg/L ABT1 or NAA for 35-45 min had higher rooting rate and survival rate. Among them, the survival rate of cuttings treated with 160 mg/L ABT1 for 35 min was the highest, up to 92.5%. [Conclusion] The study provided basis for improving the survival rate of L. japonica by cuttage, and for optimizing the rapid propagation technique.
基金supported by the National Science & Technology Pillar Program(2012BAF03B02)National Natural Science Foundation of China(21101085,U1162203)+3 种基金Natural Science Foundation of Liaoning Province(2015020196)Doctoral Fund of Shandong Province(BS2015HZ003)Fushun Science & Technology Program(FSKJHT 201423)Liaoning Excellent Talents Program in University(LJQ2012031)~~
文摘TiO2/γ-Al2O3 supported In/Ag catalysts were prepared by impregnation method,and investigated for NO reduction with CO as the reducing agent under lean burn conditions.The microscopic structure and surface properties of the catalysts were studied by N2 adsorption-desorption,X-ray diffraction,transmission electron microscopy,X-ray photoelectron spectroscopy,ultraviolet-visible spectroscopy,H2 temperature-programmed reduction and Fourier transform infrared spectroscopy.TiO2/γ-Al2O3 supported In/Ag is a good catalyst for the reduction of NO to N2.It displayed high dispersion,large amounts of surface active components and high NO adsorption capacity,which gave good catalytic performance and stability for the reduction of NO with CO under lean burn conditions.The silver species stabilized and improved the dispersion of the indium species.The introduction of TiO2 into the γ-Al2O3 support promoted NO adsorption and improved the dispersion of the indium species and silver species.
基金Project(PM2010)supported by State Key Laboratory of Powder Metallurgy Innovation Fund,ChinaProject(50825102)supported by the National Natural Science Foundation of China+1 种基金Project(10JJ6066)supported by Natural Science Foundation of Hunan Province,ChinaProject(2009RS3025)supported by Hunan Science and Technology Plan,China
文摘The Ti-Al-Mo-V-Ag α＋β alloys were processed by powder metallurgy（PM） using the blended elemental（BE） technique.The effects of Ag addition and sintering temperature on microstructure and properties of the Ti-5Al-4Mo-4V alloys were investigated using X-ray diffraction,optical microscope,scanning electron microscope and mechanical properties tests.The results show that adding Ag element increases the relative density and improves the mechanical properties of PM Ti-5Al-4Mo-4V alloy.After sintering at 1 250 ℃ for 4 h,the relative density and compression strength of Ti-5Al-4Mo-4V-5Ag alloy are 96.3% and 1 656 MPa,respectively.
基金Project (2012CB932800) supported by the National Basic Research Program of ChinaProject (2012M521330) supported by China Postdoctoral Science Foundation
文摘The fabrication of a new type of one-dimensional Au-Ag porous nanotube（NPT） structure was presented based on a facile combination of nanocrystal growth and surface modification.Ag nanowires with various diameters were firstly served as the chemical plating templates via a polyol-process.Then,one-dimensional（1D） Au-Ag porous nanostructures with tailored structural features could be prepared by controlling the individual steps involved in this process,such as nanowire growth,surface modification,thermal diffusion,and dealloying.Structural characterizations reveal these Au-Ag porous nanotubes,non-porous nanotubes and porous nanowires possess novel nano-architectures with multimodal open porosity and excellent structural continuity and integrity,which make them particularly desirable as novel 1D nanocarriers for biomedical,drug delivery and sensing applications.
文摘AIM： To observe the effects of traditional antiinflammatory medicine Lonicerae FIos （LF） on rat reflux esophagitis （RE） induced by pylorus and forestomach ligation compared with the well-known proton antioxidant, α-tocopherol. METHODS： Rats were pretreated with three different dosages of LF （500, 250 and 125 mg/kg） orally, once a day for 14 d before pylorus and forestomach ligation. Nine hours after pylorus and forestomach ligation, changes to the stomach and esophagus lesion areas, gastric volumes, acid and pepsin outputs, antioxidant effects, esophageal lipid peroxidation, superoxide dismutase （SOD）, catalase （CAT）, malondialdehyde （MDA）, myeloperoxidase and glutathione （GSH） levels, and collagen contents （marker of flexibility） were observed on the esophageal and fundic histopathology. The results were compared with an α-tocopherol （once orally, 1 h before operation, 30 mg/kg） treated group in which the effects on RE were already confirmed.RESULTS： Pylorus and forestomach ligations caused marked increases of gross esophageal and gastric mucosa lesion areas, which corresponded with histopathological changes. In addition, increases of esophageal lipid peroxidation, decreases of SOD, CAT, and GSH-free radical scavengers, increases of collagen were observed. However, these pylorus and forestomach ligation induced RE were dose-dependently inhibited by treatment of 500, 250 and 125 mg/kg of LF extract, mediated by antioxidant effects. RE at 250 mg/kg showed similar effects α-tocopherol. CONCLUSION： The results suggest that antioxidant effects of LF could attenuate the severity of RE and prevent the esophageal mucosal damage, and validate its therapeutic use in esophageal reflux disease.
基金Project (No. 20039902) supported by the Education Committee of Tianjin, China
文摘Flos Lonicerae is a medically useful traditional Chinese medicine herb. However, little is known about the antioxidant properties of Flos Lonicerae extracts. Here the antioxidant capacity of water, methanolic and ethanolic extracts prepared from Flos Lonicerae to scavenge 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical and reduce Fe3+ to Fe2+ is examined. Chlorogenic acid, a major component of Flos Lonicerae, is identified and further purified from 70% ethanolic extract with high performance liquid chromatography (HPLC) and its antioxidant capacity is characterized. The total phenolic compounds and chlorogenic acid con-tents in Flos Lonicerae are determined. The present results demonstrate that the Flos Lonicerae extracts exhibit antioxidant ac-tivity and chlorogenic acid is a major contributor to this activity.
基金All India Council for Technical Education (AICTE),New Delhi,India,for the financial support rendered under the Grant No:8023/ RID/RID/RPS-76/2010-11
文摘As titanium alloy is chemically reactive,it is very difficult to join by conventional welding techniques.Titanium alloys can easily pick up nitrogen and oxygen from the atmosphere.In the fusion welding method,brittle intermetallic compounds are formed when joining titanium alloy and stainless steel,which decrease the mechanical behavior of the couples.Hence,for joining of titanium alloy,diffusion bonding is recommended.This work dealt with the measurement of feasible process parameters for diffusion bonding of Ti-6Al-4V and AISI 304 stainless steel with silver as an intermediate layer.The quality of the bonds was confirmed by the lap shear test and microstructural analysis.With the experimental results obtained,diffusion bonding windows were constructed and this will act as reference maps to identify the process parameters for obtaining defect free bond.Bonding was successful in the temperature range of 750-800 °C.Maximum lap shear strength was achieved under a bonding pressure of 5 MPa and holding time of 90 min.
基金funding support of Babol Noshirvani University of Technology,Iran,through Grant Program No.BNUT/370167/99。
文摘The effects of Ag on the microstructure, mechanical properties, and electrical conductivity of AA2024 aluminum alloy coating were investigated. It was fabricated by friction surfacing as an additive manufacturing process. To carry out this investigation, Ag was added by 5.3, 10.6, and 16.0 wt.% to an AA2024 consumable rod by inserting holes in it. It was found that due to the strengthening by solid solution and the formation of precipitates and intermetallic containing Ag, the driving force for grain growth is reduced and consequently the grain size of the coating is decreased. After artificial aging heat treatment, the electrical conductivities of the coatings containing 0 and 16.0 wt.% Ag are increased by 4.15%(IACS) and decreased by 2.15%(IACS), respectively. While considering a linear relationship, it can be proposed that for a 1 wt.% Ag increase, the strength and hardness of the coating will be increased by 1.8% and 1.0%, respectively. It was established that the effect of Al6(Cu,Ag)Mg4 precipitate formation on strengthening is greater than that of Ag-rich intermetallic.
基金supported by the National Natural Science Foundation of China(21576050)the Natural Science Foundation of Jiangsu Province(BK20150604)~~
文摘Au-Ag bimetallic nanoparticle‐supported microporous titanium silicalite‐1catalysts were prepared via a hydrothermal‐immersion method,and their structures were examined.These materials serve as efficient catalysts for the photosynthesis of propylene oxide via the epoxidation of propene.The Au/Ag mass ratio and reaction temperature were demonstrated to have significant effects on the catalytic activity and selectivity of propylene oxide.The optimal formation rate(68.3μmol/g·h)and selectivity(52.3%)toward propylene oxide were achieved with an Au:Ag mass ratio of4:1.Notably,the strong synergistic effect between Au and Ag resulted in superior photocatalysis of the bimetallic systems compared with those of the individual systems.A probable reaction mechanism was proposed based on the theoretical and experimental results.
文摘This paper discusses the application of the model in predicting for hydrothermal Cu, Ag, Au and Pb-Zn occurrences in northwestern Yunnan. Geochemical, lineament and lithology data were the selected recognition criteria. The mentioned criteria varied against 75 known hydrothermal occurrences; the geochemical data had a weight of （W^＋= 1. 209 7, W^- =-0. 748 1） being the maximum among the three and the rest lineament and lithology have （W^＋= 0.7424, W^-= -0.449 6）, （W^＋= 0.378 7,W^-=-0.6243） respectively. The application was successful since the predicted results covers about 70% of the known deposits and predicted unknown areas.
基金supported by the National Natural Science Foundation of China (No.52064029)Yunling Scholarship of Yunnan Province Ten-Thousand Plan,China (No.KKRC201952012)Yunnan Province Ten Thousand Talents Program-Youth Top Talent Project,China (No.2018-73)。
文摘To provide an accurate prediction of the product component dependence of temperature and pressure in vacuum distillation and give convenient and efficient guidance for the designing of the process parameters of industrial production, according to the molecular interaction volume model(MIVM), the separation coefficient(β) and vapor-liquid equilibrium composition of Au-Ag alloy at different temperatures are calculated. Combined with the vapor-liquid equilibrium(VLE) theory, the VLE phase diagrams, including the temperature-composition(T-x) and pressure-composition(p-x) diagrams of Au-Ag alloy in vacuum distillation are plotted. The triple points and condensation temperatures of gold and silver vapors are calculated as well. The results show that the β decreases and the contents of gold in vapor phase increase with the distillation temperature increasing. Low pressures have positive effect on the separation of Ag and Au. The difference between the condensation temperatures of gold and silver is about 450 K in the pressure range of 1-10 Pa.
基金ACKNOWLEDGEMENT This work was partially supported by the National Basic Research Program of China （973 program） under Grant No. 2013CB329100 National Natural Science Foundation of China under Grants No. 61271200, No. 61232017, No. 61271202+1 种基金 National S＆T Major Program under Grant No. 2012ZX03005003 the Doctoral Fund of Ministry of Education of China under Grant No. 20130009110014, and the Program for New Century Excellent Talents in University （NCET） under Grant No. NCET-12-0767.
文摘To enhance seamless source mobility support in the mobile NDN(Named Data Networking) environment,we propose a novel Locator Based Mobility support Approach,dubbed LBMA.In this approach,we assign a unique topologically layered locator to each AR(Access Route)in NDN network,and extend the AR with additional functionalities,such as caching and forwarding Interest packets on behalf of the source.Meanwhile,we add an optional field to the original NDN packet,and modify the Outgoing Interface(s) field in the AR's original FIB(Forwarding Information Base)entries,to record the mobility status and the current locator of the source.Specifically,the consumer in LBMA can continue the interrupted communication,without delivering Interest packets towards the old location of the source,nor waiting for all relevant devices completing the FIB entries updating.The performance analysis result indicates that LBMA has lower handoff cost and shorter handoff latency,compared with other existing source mobility support approaches.
