The mesoporous hydroxyapatite （HA） was synthesized by hydrothermal method utilizing cationic surfactant cetyltrimethylammonium bromide （CTAB） as template. The crystalline phase, morphology and porous structure wer...The mesoporous hydroxyapatite （HA） was synthesized by hydrothermal method utilizing cationic surfactant cetyltrimethylammonium bromide （CTAB） as template. The crystalline phase, morphology and porous structure were characterized respectively by different detecting techniques. The results reveal that the particles are highly crystalline hydroxyapatite phase. The surfactant has little influence on the morphology of the crystals, but affects the porous structure obviously. The sample without CTAB has a low surface area not exceeding 33 m^2/g, and no distinct pores can be observed by TEM. While the samples obtained with the surfactant get better parameters. Numerous open-ended pores centered at 2-7 nm spread unequally on the surface of the hydroxyapatite nanorods. The N2 adsorption-desorption experiments show type IV isotherms with distinct hysteresis loops, illustrating the presence of mesoporous structure. When the mole ratio of CTAB to HA is 1：2, the sample has the largest surface area of 97.1 m^2/g and pore volume of 0.466 cm^3/g.展开更多
The coordination reactions of Cu（Ⅱ） and Ni（Ⅱ） with acid alizarine blue B （AABB） in the presence of cetyltrimethylammonium bromide （CTAB） micelle were investigated using the microsurface adsorptionspectral co...The coordination reactions of Cu（Ⅱ） and Ni（Ⅱ） with acid alizarine blue B （AABB） in the presence of cetyltrimethylammonium bromide （CTAB） micelle were investigated using the microsurface adsorptionspectral correction technique （MSASC）. The aggregation of AABB on CTAB followed the Langmuir isothermal adsorption law. The enrichment of AABB on CTAB sensitized the complexation between Cu（Ⅱ） or Ni（Ⅱ）and AABB. The binding ratio of AABB to CTAB was 1：2.5, and monomeric aggregate, AABB2CTAB5, was formed with an adsorption constant of 5.95×10^5 at 20 ℃ or 2.48×10^5 at 40 ℃. In the ternary complexation, the ratio of AABB：Cu and AABB：Ni were 1：1 and 1：2.5, respectively. Two types of aggregates, Cu2.AABB2·CTAB80 and Ni5.AABB2.CTAB80, were formed.展开更多
Interaction between beta-lactum antibiotic drug ciprofloxacin hydrochloride(CFH)and cationic surfactant cetyltrimethylammonium bromide(CTAB)was performed conductometrically in aqueous as well as in the occurrence of d...Interaction between beta-lactum antibiotic drug ciprofloxacin hydrochloride(CFH)and cationic surfactant cetyltrimethylammonium bromide(CTAB)was performed conductometrically in aqueous as well as in the occurrence of different salts(NaCl,KCl as well as NH_4Cl)over the temperature range of 298.15–323.15 K at the regular interval of 5 K.CFH drug has been suggested for the treatment of bacterial infections such as urinary tract infections and acute sinusitis.A clear critical micelle concentration(CMC)was obtained for pure CTAB as well as(CFH+CTAB)mixed systems.The decrease in CMC values of CTAB caused by the addition of CFH reveals the existence of the interaction between the components and therefore it is the indication of micelle formation at lower concentration of CTAB and their CMC values further decrease in attendance of salts.A nonlinear behavior in the CMC versus T plot was observed in all the cases.The ΔG_m^0 values are found to be negative in present study systems demonstrated the stability of the solution.The values of ΔH_m^0 and ΔS_m^0 reveal the existence of hydrophobic and electrostatic interactions between CFH and CTAB.The thermodynamic properties of transfer for the micellization were also evaluated and discussed in detail.Molecular dynamic simulation disclosed that environment of water and salts have impact on the hydrophobic interaction between CFH and CTAB.In water and salts,CTAB adopts spherical micelle in which charged hydrophilic groups are interacted with waters whereas hydrophobic tails form the core of the micelle.This hydrophobic core region is highly conserved and protected.In addition,micelle formation is more favorable in aqueous Na Cl solution than other solutions.展开更多
The ternary interaction of 1, 5 bis(2 hydroxy 5 chlorphenyl) 3 cyanoformazan (HCPCF) with cetyltrimethylammonium bromide (CTAB) and rare earths (RE: Yb, Dy, Er and Eu) was investigated at pH 9.84 by the microsur...The ternary interaction of 1, 5 bis(2 hydroxy 5 chlorphenyl) 3 cyanoformazan (HCPCF) with cetyltrimethylammonium bromide (CTAB) and rare earths (RE: Yb, Dy, Er and Eu) was investigated at pH 9.84 by the microsurface adsorption spectral correction technique (MSASC). The aggregation of HCPCF on CTAB obeys the Langmuir isothermal adsorption and the interaction of RE with the HCPCF CTAB aggregate was first found to accord with the monolayer binding. The effects of temperature and ionic strength of solution on the aggregations were made. The binary aggregate and the ternary complex were characterized.展开更多
A sensitive and selective assay of proteins is proposed based on measuring the total internal-reflected resonance light scattering(TIR-RLS) signals produced on the water/tetrachloromethane(H_2O/CCl_4) interface. In an...A sensitive and selective assay of proteins is proposed based on measuring the total internal-reflected resonance light scattering(TIR-RLS) signals produced on the water/tetrachloromethane(H_2O/CCl_4) interface. In an aqueous medium with pH value in the range of 3.29—3.78, electrostatic attraction occurs between the negatively charged Evans Blue(EB) and positively charged proteins, forming hydrophobic ion associates and resulting in EB-protein adsorption on H_2O/CCl_4 interface. The presence of cetyltrimethylammonium bromide prompts this adsorption, resulting in strongly enhanced TIR-RLS signals. The intensity of the enhanced TIR-RLS at 360—370 nm was found to be proportional to the concentration of proteins. For bovine serum albumin and human serum albumin, the linear range of detection is 0.07—1.2 μg/mL and the limits of detection are 6.68 and 6.30 ng/mL(3σ), respectively, while for lysozyme, the linear range of detection is 0.06—1.0 μg/mL and the limit of detection is 6.0 ng/mL(3σ). The content of the total albumin in a human urine sample could be directly determined by using the standard addition method with a percent recovery of 97.6%—104.1%, and the RSD ranging from 1.9% to 4.2%.展开更多
The sol-gel transition of methylcellulose （MC） solutions in the presence of ortho-methoxycinnamic acid （OMCA） or cetyltrimethylammonium bromide （CTAB） and in the coexistence of OMCA and CTAB was determined by th...The sol-gel transition of methylcellulose （MC） solutions in the presence of ortho-methoxycinnamic acid （OMCA） or cetyltrimethylammonium bromide （CTAB） and in the coexistence of OMCA and CTAB was determined by the rheological measurement. It has been found that the sol-gel transition temperature of MC solutions increases linearly with the concentration of either OMCA or CTAB in solution, respectively. However, in the coexistence of OMCA and CTAB, the sol-gel transition temperature of MC solutions remains invariable, independent of the concentration of CTAB in solution. The experimental results show that OMCA has priority to adsorb on the methyl group of MC chains to form polymer-bound aggregates. In particular, these aggregates inhibit the hydrophobic interaction between CTAB and the methyl group of MC chains completely. Taking into account the fact that OMCA is almost insoluble in MC-free solutions but dissolves very well in aqueous MC solutions, we propose the formation of the core-shell architecture prompted by OMCA and the methyl group of MC chains, with the methyl group of MC chains serving as the core and the self-assembly of OMCA molecules serving as the shell. Obviously, the formation of the core-shell structure increases the solubility of OMCA, improves the stability of methyl groups of MC chains at high temperatures and inhibits the hydrophobic interaction between CTAB and the methyl group of MC chains in solution. The abnormal behavior relating to the sol-gel transition of MC solutions in the presence of OMCA or in the coexistence of OMCA and CTAB is therefore explained. Upon UV irradiation, the sol-gel transition temperature of MC solutions in the presence of OMCA, or in the coexistence of OMCA and CTAB, decreases notably. However, the dependence of the sol-gel transition temperature of MC solutions as a function of OMCA concentration, or CTAB concentration in the presence of OMCA, does not change after UV irradiation.展开更多
The effects of cetyltrimethylammonium bromide （CTAB） on the properties of hemoglobin （Hb） at low CTAB concentration were studied in Hb/acyclovir/CTAB system by the methods of UV-Vis spectrum, fluorescence, zeta po...The effects of cetyltrimethylammonium bromide （CTAB） on the properties of hemoglobin （Hb） at low CTAB concentration were studied in Hb/acyclovir/CTAB system by the methods of UV-Vis spectrum, fluorescence, zeta potential, conductivity and negative-staining transmission electron microscope （TEM）. With the increase of CTAB concentration, the UV peak intensity at 276 nm, the intrinsic fluorescence, the zeta potential of Hb and the system conductivity were all enhanced. Hb was easily oxidized to oxyHb and hemichrome. In Hb/acyclovir/CTAB system, CTAB made the UV-Vis spectrum, fluorescence, conductivity and conformation of Hb tend to be returned to those of the original Hb but the zeta potential not to do so. The UV absorption peak of Hb-acyclovir complex disappeared and the tight structure of Hb aroused by acyclovir was refolded. When CTAB concentration was higher than 5 × 10 ^5 mol/L, the two absorption peaks at 536 and 576 nm appeared again, and the Hb structure became looser again.展开更多
The fluorescence of tetracycline was greatly enhanced by chelation with Eu 3+ in Tris HCl buffer (pH8.5). The addition of cetyltrimethylammonium bromide, a cationic surfactant, further enhanced the fluorescence ...The fluorescence of tetracycline was greatly enhanced by chelation with Eu 3+ in Tris HCl buffer (pH8.5). The addition of cetyltrimethylammonium bromide, a cationic surfactant, further enhanced the fluorescence of tetracycline Eu 3+ chelates.This spectrofluorimetric method for the determination of tetracycline yielded a linear responeses in the range of 10 nmol/L 10 μmol/L. The detection limit was 5 nmol/L (or 2.22 ng/mL).The recovery of tetracycline spiked in serum at levels of l and 0.09 μg/mL was 97.9% and 97.8%, respectively. This method is fast, sensitive and suitable for the determination of tetracycline in biological specimens.展开更多
The adsorption isotherms of cetyltrimethylammonium ion (CTA^+) together with that of the Br^- counterion on silica gel, and the effects of pH and added salts(NaF, NaCl and NaBr)have been systematically determined at 2...The adsorption isotherms of cetyltrimethylammonium ion (CTA^+) together with that of the Br^- counterion on silica gel, and the effects of pH and added salts(NaF, NaCl and NaBr)have been systematically determined at 25℃. Electrophoretic mobilities of the silica gel particles have also been measured in the same conditions. The adsorption isotherm of CTA^+ consists of four regions. Region I, at low concentrations of surfactant, the adsorption results primarily from electrostatic force between CTA^+ and the negatively charged silica surface. Region II (first plateau), at medium concentrations, the adsorption is due to both the electrostatic force and the specific attraction (vdW forces) between CTA^+ and the surface. Region III, characterized by an abrupt increase in the slope of the isotherm when the concentration reaches a particular point known as hemimicelle concentration (HMC). The abrupt increase in the adsorption is due to the hydrophobic interaction between hydrocarbon chains. Region IV(second plateau), at or above CMC, the limiting adsorption is reached as the micelle is not adsorbed, Based on this model. the experimental results can be explained reasonably. The results show that the HMC is about half of the CMC. According to the assumption that, each adsorbed CTA^+ ion in the first plateau is an active center for surface aggregation, the average aggregation number of hemimicelle have been calculated.展开更多
Cetyltrimethylammonium bromide （CTAB）/potassium bromide （KBr） micellar system has been used as a viscosity probe to study the inclusion complexation between β-cyclodextrin （β-CD） and CTAB. Viscosity measuremen...Cetyltrimethylammonium bromide （CTAB）/potassium bromide （KBr） micellar system has been used as a viscosity probe to study the inclusion complexation between β-cyclodextrin （β-CD） and CTAB. Viscosity measurements show that the inclusion complexation between β-CD and CTAB may cause the breakdown of CTAB/KBr wormlike micelles, resulting in the decrease of the solution viscosity. The viscosity minimum at Cβ-CD/CCTAB=2 indicate the molecular ratio of host molecule to guest molecule is 2：1 in the β-CD/CTAB inclusion complex.展开更多
This paper describes an effective method for determining chlordiazepoxide. An excess of sodium tetraphenylboron is added to precipitate chlordiazepoxide in HAc NaAc buffer solution (pH=4.0). After filtering off the p...This paper describes an effective method for determining chlordiazepoxide. An excess of sodium tetraphenylboron is added to precipitate chlordiazepoxide in HAc NaAc buffer solution (pH=4.0). After filtering off the precipitate, the excessive sodium tetraphenylboron in the filtrate is titrated with cetyltrimethylammonium bromide standard solution, with bromophenol blue as indicator. The method is simple and rapid, it has been applied for the determination of chlordiazepoxide raw materials with satisfactory results. The recovery is between 99.58% and 100.4%, the relative error is less than ± 0.50% . Experiments show that the method gives the same results as the approach using nonaqueous titration (ChP).展开更多
This paper describes an effective method for determining ciprofloxacin lactate. An excess of sodium tetraphenylboron was added to precipitate ciprofloxacin lactate in HAc-NaAc buffer solution (pH=4.0). After filtering...This paper describes an effective method for determining ciprofloxacin lactate. An excess of sodium tetraphenylboron was added to precipitate ciprofloxacin lactate in HAc-NaAc buffer solution (pH=4.0). After filtering off the precipitate, the excessive sodium tetraphenylboron in the filtrate was titrated with cetyltrimethylammonium bromide standard solution, with bromophenol blue as indicator. The method is simple and rapid, it has been applied to the determination of ciprofloxacin lactate raw material with satisfactory results. The recovery was between 99.66% and 100.2%, the relative error was less than ±0.40%. Experiments showed that the method gave the same results as the approach using nonaqueous titration (ChP).展开更多
Hierarchical zeolite materials were prepared via one‐pot synthesis of ZSM‐11zeolites with different molar ratios(R)of a mesoporogen,i.e.,cetyltrimethylammonium bromide template(CTAB),to a microporogen,i.e.,tetra‐n...Hierarchical zeolite materials were prepared via one‐pot synthesis of ZSM‐11zeolites with different molar ratios(R)of a mesoporogen,i.e.,cetyltrimethylammonium bromide template(CTAB),to a microporogen,i.e.,tetra‐n‐butylammonium bromide(TBABr).The structures,morphologies,and textural properties of the resultant materials were investigated.Initially,with increasing R,the crystal size of the synthesized product decreased,the number of intercrystalline mesopores increased,and a pure ZSM‐11zeolite phase was present.Then an MCM‐41‐like phase was produced and embedded in the ZSM‐11zeolite phase.Finally,an MCM‐41‐like phase was obtained.The alkalinity had important effects on the physicochemical and textural properties of the prepared samples.A possible mechanism of formation of the hierarchical ZSM‐11zeolite was proposed on the basis of a combination of various characterization results.The role of CTAB varied depending on the R value,and it showed a capping effect,micellar effect,and template effect.These effects of CTAB were synergetic in ZSM‐11synthesis,but they were competitive with the structure‐directing effect of TBABr.In addition,the impact of the acidic properties and porosities of the hierarchical ZSM‐11catalysts on their performances in the alkylation of benzene with dimethyl ether was investigated.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.展开更多
The adsorption of sulfate in aqueous solutions onto organo-nano-clay prepared by natural zeolite and cationic surfactant cetyltrimethylammonium bromide （CTAB） was studied.Parameters such as adsorbent dosage,contact ...The adsorption of sulfate in aqueous solutions onto organo-nano-clay prepared by natural zeolite and cationic surfactant cetyltrimethylammonium bromide （CTAB） was studied.Parameters such as adsorbent dosage,contact time and temperature were investigated using batch adsorption studies.The results show that the uptake of sulfate increases with the increase of contact time and temperature,and decreases with the increase of dosage.The Freundlich isotherm model is fit to explain the sulfate adsorption onto organo-nano-clay.The maximum adsorption capacity is found to be 38.02 mg/g at 40 ℃.The kinetic data fit well the pseudo-second-order and Elovich models with a R2 more than 0.98.It is suggested that chemisorption is the rate-controlling step for adsorption of sulfate onto organo-nano-clay,meanwhile both intraparticle diffusion and boundary layer diffusion also contribute as well.Ion-exchange between sulfate anions and bromide ions and complexation between sulfate anions and CTAB cations are responsible for the mechanism of sulfate adsorption.Keywords：organo-nano-clay; cetyltrimethylammonium bromide （CTAB）; modification; sulfate; adsorption展开更多
Properties of hydroxyapatite （HA, Ca10（PO4）6（OH）2）, including bioactivity, biocompatibility, solubility and adsorption could be tailored over wide ranges by the control of particle composition, particle size and...Properties of hydroxyapatite （HA, Ca10（PO4）6（OH）2）, including bioactivity, biocompatibility, solubility and adsorption could be tailored over wide ranges by the control of particle composition, particle size and morphology. In order to satisfy various applications, well-crystallized pure HA nanoparticles were synthesized at moderate temperatures by hydrotherrnal synthesis, and HA nanoparticles with different lengths were obtained by adding organic additives. X-ray diffractometry （XRD） and Fourier transform infrared （FTIR） spectrometry were used to characterize these nanoparticles, and the morphologies of the HA particles were observed by transmission electron microscopy （TEM）. The results demonstrate that shorter rod-like HA particles can be prepared by adding cetyltrimethylammonium bromide （CTAB）, as the additive of CTAB can block the HA crystal growth along with c-axis. And whisker HA particles are obtained by adding ethylenediamine tetraacetic acid （EDTA）, since EDTA may have effect on the dissolution-repreeipitation process of HA.展开更多
The interaction between N, N′-bis（dimethyldodecyl）-1,6-hexanediammoniumdibromide （G12-6-12） and cetyltrimethylammonium bromide （CTAB） in D20 aqueous medium has been investigated by NMR at 298 K. The G12-6-12 an...The interaction between N, N′-bis（dimethyldodecyl）-1,6-hexanediammoniumdibromide （G12-6-12） and cetyltrimethylammonium bromide （CTAB） in D20 aqueous medium has been investigated by NMR at 298 K. The G12-6-12 and CTAB are about 0.773 and measured critical micelle concentration （cmc） of 0.668 mmol/L, respectively. The cmc^＊ （cmc of mixture） values are less than CMC^＊ （cmc of ideally mixed solution） in the mixed system, and the interaction parameter βM〈0 at different molar fractions α of G12-6-12 in the mixed systems, but just when α≤0.3, cmc^＊ values are much smaller than CMC^＊, and βM satisfies the relation of ｜βM｜〉｜ln（cmc1/cmc2）｜ （cmcl： cmc of pure G12-6-12 and cmc2： cmc Of pure CTAB）. The results indicate that there exists synergism between G12-6-12 and CTAB, and they can form mixed micelles, which is further proven by 2D NOESY and self-diffusion coefficient D experiments. There are intermolecular cross peaks between G12-6-12 and CTAB in 2D NOESY, and the radius of micelles in mixed solution is bigger than that in G12-6-12 pure solution in D experiments, indicating there are mixed micelles. However, when α〉0.3, we find that cmc^＊≈CMC^＊, βM≈0, obviously, the two surfactants are almost ideal mixing fitting the pseudo-phase separation model and regular solution theory.展开更多
SAfter leached from municipal solid waste landfill was treated by recirculation, the concentration of pollutants decreases greatly, and the moisture content of the solid waste in landfill site was increased and waste ...SAfter leached from municipal solid waste landfill was treated by recirculation, the concentration of pollutants decreases greatly, and the moisture content of the solid waste in landfill site was increased and waste stabilization rate was accelerated. Compared with traditional treatment methods, this method offers more important practical values, including short investment, enhanced treatment efficiency and facilitated operation and management. The experimental results indicated that a 99.9% removal of ammonia nitrogen and an 80.5% removal of COD were obtained, when hydraulic power surface load is 15.92 L/m^2·d, and organic surface load is 25.54 g/m^2·d.展开更多
Ni-Co-Fe2O3 composite coatings were electrodeposited using cetyltrimethylammonium bromide(CTAB)-modified Watt's nickel bath with Fe2O3 particles dispersed in it.The effects of the plating parameters on the chemica...Ni-Co-Fe2O3 composite coatings were electrodeposited using cetyltrimethylammonium bromide(CTAB)-modified Watt's nickel bath with Fe2O3 particles dispersed in it.The effects of the plating parameters on the chemical composition,structural and morphological characteristics of the electrodeposited Ni-Co-Fe2O3 composite coatings were investigated by energy dispersive X-ray(EDS) spectroscopy,X-ray diffractometry(XRD) and scanning electron microscopy(SEM).The results reveal that Fe2O3 particles can be codeposited in the Ni-Co matrix.The codeposition of Fe2O3 particles with Ni-Co is favoured at high Fe2O3 particle concentration and medium stirring,and the deposition of Co is favoured at high concentration of CTAB.Moreover,the study of the textural perfection of the deposits reveals that the presence of particles leads to the worsening of the quality of the observed <220> preferred orientation.Composites with high concentration of embedded particles exhibit a preferred crystal orientation of <111>.The more the embedded Fe2O3 particles in the metallic matrix,the smaller the sizes of the crystallite for the composite deposits.展开更多
Some new heteropolyoxometalates of large organic cations with molybdotungstosilicic acids （general formula： （CTMA）4SiMoxW12-xO40·mH2O·nDMF, x=0,2,4,6,8,10,12） were prepared by the reaction of cetyltrime...Some new heteropolyoxometalates of large organic cations with molybdotungstosilicic acids （general formula： （CTMA）4SiMoxW12-xO40·mH2O·nDMF, x=0,2,4,6,8,10,12） were prepared by the reaction of cetyltrimethylammonium bromide （CTMAB,C16H33N（CH3）3Br） with H4SiMoxW12-xO40（x=0,2,4,6,8,10,12） in aqueous solution and recrystallization in DMF, and characterized by elemental analysis, IR spectra,TG- DTA and XRD techniques. The IR spectrum confirms the presence of Keggin structure and organic cations in these compounds, and it is indicated that the stretching vibration of the M-Od, M-Ob-M and Si-Oa becomes more red-shifted when molybdenum is gradually substituted for the tungsten atom. In particular, the thermal decomposition of the heteropolyoxometalates was studied in nitrogen atmosphere. The TG-DTA curves show that their thermal behaviors not only contain the release of water molecule, DMF molecule, CTMA and its fragments but also contains simultaneous collapse of Keggin anion. Their end products of the thermal decomposition are the mixture of WO3, MoO3 and SiO2. And from the final decomposition temperature of view, it is found that the thermal stability of these compounds gradually is decreased when the number of molybdenum atoms is increased.展开更多
A new method for the determination of DNA was developed with azocarmine G(AG) in the presence of cetyltrimethylammonium bromide(CTAB) by the resonance light scattering (RLS) technique. The synthetic samples were deter...A new method for the determination of DNA was developed with azocarmine G(AG) in the presence of cetyltrimethylammonium bromide(CTAB) by the resonance light scattering (RLS) technique. The synthetic samples were determined with satisfactory results, and the reaction mechanism was also studied. The results show that underthe optimum conditions, the weak RLS signal of AG can be enhanced by DNA, which results from the formation of a new ternary complex AG-CTAB-DNA with large size. Moreover, the enhanced RLS intensity at 552 nm is directlyproportional to the concentration of DNA in the range of 01.0 μg/mL for fish sperm DNA (fsDNA) and 01.5 μg/mLfor calf thymus DNA (ctDNA). Based on this, a new assay of DNA can be established. The detection limits (3σ) are 2.1 ng/mL for fsDNA and 2.2 ng/mL for ctDNA, respectively.展开更多
基金Projects(51102285,81170912)supported by the National Natural Science Foundation of ChinaProject supported by the Open Foundation of State Key Laboratory of Powder Metallurgy,China
文摘The mesoporous hydroxyapatite （HA） was synthesized by hydrothermal method utilizing cationic surfactant cetyltrimethylammonium bromide （CTAB） as template. The crystalline phase, morphology and porous structure were characterized respectively by different detecting techniques. The results reveal that the particles are highly crystalline hydroxyapatite phase. The surfactant has little influence on the morphology of the crystals, but affects the porous structure obviously. The sample without CTAB has a low surface area not exceeding 33 m^2/g, and no distinct pores can be observed by TEM. While the samples obtained with the surfactant get better parameters. Numerous open-ended pores centered at 2-7 nm spread unequally on the surface of the hydroxyapatite nanorods. The N2 adsorption-desorption experiments show type IV isotherms with distinct hysteresis loops, illustrating the presence of mesoporous structure. When the mole ratio of CTAB to HA is 1：2, the sample has the largest surface area of 97.1 m^2/g and pore volume of 0.466 cm^3/g.
文摘The coordination reactions of Cu（Ⅱ） and Ni（Ⅱ） with acid alizarine blue B （AABB） in the presence of cetyltrimethylammonium bromide （CTAB） micelle were investigated using the microsurface adsorptionspectral correction technique （MSASC）. The aggregation of AABB on CTAB followed the Langmuir isothermal adsorption law. The enrichment of AABB on CTAB sensitized the complexation between Cu（Ⅱ） or Ni（Ⅱ）and AABB. The binding ratio of AABB to CTAB was 1：2.5, and monomeric aggregate, AABB2CTAB5, was formed with an adsorption constant of 5.95×10^5 at 20 ℃ or 2.48×10^5 at 40 ℃. In the ternary complexation, the ratio of AABB：Cu and AABB：Ni were 1：1 and 1：2.5, respectively. Two types of aggregates, Cu2.AABB2·CTAB80 and Ni5.AABB2.CTAB80, were formed.
文摘Interaction between beta-lactum antibiotic drug ciprofloxacin hydrochloride(CFH)and cationic surfactant cetyltrimethylammonium bromide(CTAB)was performed conductometrically in aqueous as well as in the occurrence of different salts(NaCl,KCl as well as NH_4Cl)over the temperature range of 298.15–323.15 K at the regular interval of 5 K.CFH drug has been suggested for the treatment of bacterial infections such as urinary tract infections and acute sinusitis.A clear critical micelle concentration(CMC)was obtained for pure CTAB as well as(CFH+CTAB)mixed systems.The decrease in CMC values of CTAB caused by the addition of CFH reveals the existence of the interaction between the components and therefore it is the indication of micelle formation at lower concentration of CTAB and their CMC values further decrease in attendance of salts.A nonlinear behavior in the CMC versus T plot was observed in all the cases.The ΔG_m^0 values are found to be negative in present study systems demonstrated the stability of the solution.The values of ΔH_m^0 and ΔS_m^0 reveal the existence of hydrophobic and electrostatic interactions between CFH and CTAB.The thermodynamic properties of transfer for the micellization were also evaluated and discussed in detail.Molecular dynamic simulation disclosed that environment of water and salts have impact on the hydrophobic interaction between CFH and CTAB.In water and salts,CTAB adopts spherical micelle in which charged hydrophilic groups are interacted with waters whereas hydrophobic tails form the core of the micelle.This hydrophobic core region is highly conserved and protected.In addition,micelle formation is more favorable in aqueous Na Cl solution than other solutions.
基金ProjectsupportedbytheNaturalScienceFoundationofAnhuiProvince (No .0 1 0 45 30 1 )andtheAnhuiProvincialScienceandTechnologyforExcellentYouths
文摘The ternary interaction of 1, 5 bis(2 hydroxy 5 chlorphenyl) 3 cyanoformazan (HCPCF) with cetyltrimethylammonium bromide (CTAB) and rare earths (RE: Yb, Dy, Er and Eu) was investigated at pH 9.84 by the microsurface adsorption spectral correction technique (MSASC). The aggregation of HCPCF on CTAB obeys the Langmuir isothermal adsorption and the interaction of RE with the HCPCF CTAB aggregate was first found to accord with the monolayer binding. The effects of temperature and ionic strength of solution on the aggregations were made. The binary aggregate and the ternary complex were characterized.
文摘A sensitive and selective assay of proteins is proposed based on measuring the total internal-reflected resonance light scattering(TIR-RLS) signals produced on the water/tetrachloromethane(H_2O/CCl_4) interface. In an aqueous medium with pH value in the range of 3.29—3.78, electrostatic attraction occurs between the negatively charged Evans Blue(EB) and positively charged proteins, forming hydrophobic ion associates and resulting in EB-protein adsorption on H_2O/CCl_4 interface. The presence of cetyltrimethylammonium bromide prompts this adsorption, resulting in strongly enhanced TIR-RLS signals. The intensity of the enhanced TIR-RLS at 360—370 nm was found to be proportional to the concentration of proteins. For bovine serum albumin and human serum albumin, the linear range of detection is 0.07—1.2 μg/mL and the limits of detection are 6.68 and 6.30 ng/mL(3σ), respectively, while for lysozyme, the linear range of detection is 0.06—1.0 μg/mL and the limit of detection is 6.0 ng/mL(3σ). The content of the total albumin in a human urine sample could be directly determined by using the standard addition method with a percent recovery of 97.6%—104.1%, and the RSD ranging from 1.9% to 4.2%.
文摘The sol-gel transition of methylcellulose （MC） solutions in the presence of ortho-methoxycinnamic acid （OMCA） or cetyltrimethylammonium bromide （CTAB） and in the coexistence of OMCA and CTAB was determined by the rheological measurement. It has been found that the sol-gel transition temperature of MC solutions increases linearly with the concentration of either OMCA or CTAB in solution, respectively. However, in the coexistence of OMCA and CTAB, the sol-gel transition temperature of MC solutions remains invariable, independent of the concentration of CTAB in solution. The experimental results show that OMCA has priority to adsorb on the methyl group of MC chains to form polymer-bound aggregates. In particular, these aggregates inhibit the hydrophobic interaction between CTAB and the methyl group of MC chains completely. Taking into account the fact that OMCA is almost insoluble in MC-free solutions but dissolves very well in aqueous MC solutions, we propose the formation of the core-shell architecture prompted by OMCA and the methyl group of MC chains, with the methyl group of MC chains serving as the core and the self-assembly of OMCA molecules serving as the shell. Obviously, the formation of the core-shell structure increases the solubility of OMCA, improves the stability of methyl groups of MC chains at high temperatures and inhibits the hydrophobic interaction between CTAB and the methyl group of MC chains in solution. The abnormal behavior relating to the sol-gel transition of MC solutions in the presence of OMCA or in the coexistence of OMCA and CTAB is therefore explained. Upon UV irradiation, the sol-gel transition temperature of MC solutions in the presence of OMCA, or in the coexistence of OMCA and CTAB, decreases notably. However, the dependence of the sol-gel transition temperature of MC solutions as a function of OMCA concentration, or CTAB concentration in the presence of OMCA, does not change after UV irradiation.
基金Project supported by the National Natural Science Foundation of China （Nos. 20573091, 20233010）.
文摘The effects of cetyltrimethylammonium bromide （CTAB） on the properties of hemoglobin （Hb） at low CTAB concentration were studied in Hb/acyclovir/CTAB system by the methods of UV-Vis spectrum, fluorescence, zeta potential, conductivity and negative-staining transmission electron microscope （TEM）. With the increase of CTAB concentration, the UV peak intensity at 276 nm, the intrinsic fluorescence, the zeta potential of Hb and the system conductivity were all enhanced. Hb was easily oxidized to oxyHb and hemichrome. In Hb/acyclovir/CTAB system, CTAB made the UV-Vis spectrum, fluorescence, conductivity and conformation of Hb tend to be returned to those of the original Hb but the zeta potential not to do so. The UV absorption peak of Hb-acyclovir complex disappeared and the tight structure of Hb aroused by acyclovir was refolded. When CTAB concentration was higher than 5 × 10 ^5 mol/L, the two absorption peaks at 536 and 576 nm appeared again, and the Hb structure became looser again.
文摘The fluorescence of tetracycline was greatly enhanced by chelation with Eu 3+ in Tris HCl buffer (pH8.5). The addition of cetyltrimethylammonium bromide, a cationic surfactant, further enhanced the fluorescence of tetracycline Eu 3+ chelates.This spectrofluorimetric method for the determination of tetracycline yielded a linear responeses in the range of 10 nmol/L 10 μmol/L. The detection limit was 5 nmol/L (or 2.22 ng/mL).The recovery of tetracycline spiked in serum at levels of l and 0.09 μg/mL was 97.9% and 97.8%, respectively. This method is fast, sensitive and suitable for the determination of tetracycline in biological specimens.
文摘The adsorption isotherms of cetyltrimethylammonium ion (CTA^+) together with that of the Br^- counterion on silica gel, and the effects of pH and added salts(NaF, NaCl and NaBr)have been systematically determined at 25℃. Electrophoretic mobilities of the silica gel particles have also been measured in the same conditions. The adsorption isotherm of CTA^+ consists of four regions. Region I, at low concentrations of surfactant, the adsorption results primarily from electrostatic force between CTA^+ and the negatively charged silica surface. Region II (first plateau), at medium concentrations, the adsorption is due to both the electrostatic force and the specific attraction (vdW forces) between CTA^+ and the surface. Region III, characterized by an abrupt increase in the slope of the isotherm when the concentration reaches a particular point known as hemimicelle concentration (HMC). The abrupt increase in the adsorption is due to the hydrophobic interaction between hydrocarbon chains. Region IV(second plateau), at or above CMC, the limiting adsorption is reached as the micelle is not adsorbed, Based on this model. the experimental results can be explained reasonably. The results show that the HMC is about half of the CMC. According to the assumption that, each adsorbed CTA^+ ion in the first plateau is an active center for surface aggregation, the average aggregation number of hemimicelle have been calculated.
基金This work was supported by the Doctor Research Foundation of Anhui University of Architecture （No.20101201） and the Postdoctoral Science Foundation of Anhui University of Architecture （No.20110101）.
文摘Cetyltrimethylammonium bromide （CTAB）/potassium bromide （KBr） micellar system has been used as a viscosity probe to study the inclusion complexation between β-cyclodextrin （β-CD） and CTAB. Viscosity measurements show that the inclusion complexation between β-CD and CTAB may cause the breakdown of CTAB/KBr wormlike micelles, resulting in the decrease of the solution viscosity. The viscosity minimum at Cβ-CD/CCTAB=2 indicate the molecular ratio of host molecule to guest molecule is 2：1 in the β-CD/CTAB inclusion complex.
文摘This paper describes an effective method for determining chlordiazepoxide. An excess of sodium tetraphenylboron is added to precipitate chlordiazepoxide in HAc NaAc buffer solution (pH=4.0). After filtering off the precipitate, the excessive sodium tetraphenylboron in the filtrate is titrated with cetyltrimethylammonium bromide standard solution, with bromophenol blue as indicator. The method is simple and rapid, it has been applied for the determination of chlordiazepoxide raw materials with satisfactory results. The recovery is between 99.58% and 100.4%, the relative error is less than ± 0.50% . Experiments show that the method gives the same results as the approach using nonaqueous titration (ChP).
文摘This paper describes an effective method for determining ciprofloxacin lactate. An excess of sodium tetraphenylboron was added to precipitate ciprofloxacin lactate in HAc-NaAc buffer solution (pH=4.0). After filtering off the precipitate, the excessive sodium tetraphenylboron in the filtrate was titrated with cetyltrimethylammonium bromide standard solution, with bromophenol blue as indicator. The method is simple and rapid, it has been applied to the determination of ciprofloxacin lactate raw material with satisfactory results. The recovery was between 99.66% and 100.2%, the relative error was less than ±0.40%. Experiments showed that the method gave the same results as the approach using nonaqueous titration (ChP).
文摘Hierarchical zeolite materials were prepared via one‐pot synthesis of ZSM‐11zeolites with different molar ratios(R)of a mesoporogen,i.e.,cetyltrimethylammonium bromide template(CTAB),to a microporogen,i.e.,tetra‐n‐butylammonium bromide(TBABr).The structures,morphologies,and textural properties of the resultant materials were investigated.Initially,with increasing R,the crystal size of the synthesized product decreased,the number of intercrystalline mesopores increased,and a pure ZSM‐11zeolite phase was present.Then an MCM‐41‐like phase was produced and embedded in the ZSM‐11zeolite phase.Finally,an MCM‐41‐like phase was obtained.The alkalinity had important effects on the physicochemical and textural properties of the prepared samples.A possible mechanism of formation of the hierarchical ZSM‐11zeolite was proposed on the basis of a combination of various characterization results.The role of CTAB varied depending on the R value,and it showed a capping effect,micellar effect,and template effect.These effects of CTAB were synergetic in ZSM‐11synthesis,but they were competitive with the structure‐directing effect of TBABr.In addition,the impact of the acidic properties and porosities of the hierarchical ZSM‐11catalysts on their performances in the alkylation of benzene with dimethyl ether was investigated.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.
基金Project(51178159)supported by the National Natural Science Foundation of ChinaProject(CXZZ12_0236)supported by the Postgraduate Technological Innovation Program of Jiangsu Province Education Department,China
文摘The adsorption of sulfate in aqueous solutions onto organo-nano-clay prepared by natural zeolite and cationic surfactant cetyltrimethylammonium bromide （CTAB） was studied.Parameters such as adsorbent dosage,contact time and temperature were investigated using batch adsorption studies.The results show that the uptake of sulfate increases with the increase of contact time and temperature,and decreases with the increase of dosage.The Freundlich isotherm model is fit to explain the sulfate adsorption onto organo-nano-clay.The maximum adsorption capacity is found to be 38.02 mg/g at 40 ℃.The kinetic data fit well the pseudo-second-order and Elovich models with a R2 more than 0.98.It is suggested that chemisorption is the rate-controlling step for adsorption of sulfate onto organo-nano-clay,meanwhile both intraparticle diffusion and boundary layer diffusion also contribute as well.Ion-exchange between sulfate anions and bromide ions and complexation between sulfate anions and CTAB cations are responsible for the mechanism of sulfate adsorption.Keywords：organo-nano-clay; cetyltrimethylammonium bromide （CTAB）; modification; sulfate; adsorption
基金Project(20070410304) supported by Postdoctoral Foundation of ChinaProject(07JJ3105) supported by Hunan Provincial Natural Science Foundation of China
文摘Properties of hydroxyapatite （HA, Ca10（PO4）6（OH）2）, including bioactivity, biocompatibility, solubility and adsorption could be tailored over wide ranges by the control of particle composition, particle size and morphology. In order to satisfy various applications, well-crystallized pure HA nanoparticles were synthesized at moderate temperatures by hydrotherrnal synthesis, and HA nanoparticles with different lengths were obtained by adding organic additives. X-ray diffractometry （XRD） and Fourier transform infrared （FTIR） spectrometry were used to characterize these nanoparticles, and the morphologies of the HA particles were observed by transmission electron microscopy （TEM）. The results demonstrate that shorter rod-like HA particles can be prepared by adding cetyltrimethylammonium bromide （CTAB）, as the additive of CTAB can block the HA crystal growth along with c-axis. And whisker HA particles are obtained by adding ethylenediamine tetraacetic acid （EDTA）, since EDTA may have effect on the dissolution-repreeipitation process of HA.
文摘The interaction between N, N′-bis（dimethyldodecyl）-1,6-hexanediammoniumdibromide （G12-6-12） and cetyltrimethylammonium bromide （CTAB） in D20 aqueous medium has been investigated by NMR at 298 K. The G12-6-12 and CTAB are about 0.773 and measured critical micelle concentration （cmc） of 0.668 mmol/L, respectively. The cmc^＊ （cmc of mixture） values are less than CMC^＊ （cmc of ideally mixed solution） in the mixed system, and the interaction parameter βM〈0 at different molar fractions α of G12-6-12 in the mixed systems, but just when α≤0.3, cmc^＊ values are much smaller than CMC^＊, and βM satisfies the relation of ｜βM｜〉｜ln（cmc1/cmc2）｜ （cmcl： cmc of pure G12-6-12 and cmc2： cmc Of pure CTAB）. The results indicate that there exists synergism between G12-6-12 and CTAB, and they can form mixed micelles, which is further proven by 2D NOESY and self-diffusion coefficient D experiments. There are intermolecular cross peaks between G12-6-12 and CTAB in 2D NOESY, and the radius of micelles in mixed solution is bigger than that in G12-6-12 pure solution in D experiments, indicating there are mixed micelles. However, when α〉0.3, we find that cmc^＊≈CMC^＊, βM≈0, obviously, the two surfactants are almost ideal mixing fitting the pseudo-phase separation model and regular solution theory.
基金the Key Scientific and Technological Project of Hubei Province(No.2002AA301C102)
文摘SAfter leached from municipal solid waste landfill was treated by recirculation, the concentration of pollutants decreases greatly, and the moisture content of the solid waste in landfill site was increased and waste stabilization rate was accelerated. Compared with traditional treatment methods, this method offers more important practical values, including short investment, enhanced treatment efficiency and facilitated operation and management. The experimental results indicated that a 99.9% removal of ammonia nitrogen and an 80.5% removal of COD were obtained, when hydraulic power surface load is 15.92 L/m^2·d, and organic surface load is 25.54 g/m^2·d.
基金Project(2005CB623703) supported by the National Key Basic Research Program of ChinaProject(50474051) supported by the National Natural Science Foundation of China+2 种基金Project(CX2009B032) supported by Innovation Foundation for Postgraduate of Hunan Province of China Project(ZKJ2009024) supported by the Precious Apparatus Open Share Foundation of Central South University, ChinaProject(2009ybfz02) supported by Excellent Doctor Support Fund of Central South University,China
文摘Ni-Co-Fe2O3 composite coatings were electrodeposited using cetyltrimethylammonium bromide(CTAB)-modified Watt's nickel bath with Fe2O3 particles dispersed in it.The effects of the plating parameters on the chemical composition,structural and morphological characteristics of the electrodeposited Ni-Co-Fe2O3 composite coatings were investigated by energy dispersive X-ray(EDS) spectroscopy,X-ray diffractometry(XRD) and scanning electron microscopy(SEM).The results reveal that Fe2O3 particles can be codeposited in the Ni-Co matrix.The codeposition of Fe2O3 particles with Ni-Co is favoured at high Fe2O3 particle concentration and medium stirring,and the deposition of Co is favoured at high concentration of CTAB.Moreover,the study of the textural perfection of the deposits reveals that the presence of particles leads to the worsening of the quality of the observed <220> preferred orientation.Composites with high concentration of embedded particles exhibit a preferred crystal orientation of <111>.The more the embedded Fe2O3 particles in the metallic matrix,the smaller the sizes of the crystallite for the composite deposits.
基金the Natural Science Foundation of the Educational Commission of Hubei Province(No.J200522002 and Z200622001)
文摘Some new heteropolyoxometalates of large organic cations with molybdotungstosilicic acids （general formula： （CTMA）4SiMoxW12-xO40·mH2O·nDMF, x=0,2,4,6,8,10,12） were prepared by the reaction of cetyltrimethylammonium bromide （CTMAB,C16H33N（CH3）3Br） with H4SiMoxW12-xO40（x=0,2,4,6,8,10,12） in aqueous solution and recrystallization in DMF, and characterized by elemental analysis, IR spectra,TG- DTA and XRD techniques. The IR spectrum confirms the presence of Keggin structure and organic cations in these compounds, and it is indicated that the stretching vibration of the M-Od, M-Ob-M and Si-Oa becomes more red-shifted when molybdenum is gradually substituted for the tungsten atom. In particular, the thermal decomposition of the heteropolyoxometalates was studied in nitrogen atmosphere. The TG-DTA curves show that their thermal behaviors not only contain the release of water molecule, DMF molecule, CTMA and its fragments but also contains simultaneous collapse of Keggin anion. Their end products of the thermal decomposition are the mixture of WO3, MoO3 and SiO2. And from the final decomposition temperature of view, it is found that the thermal stability of these compounds gradually is decreased when the number of molybdenum atoms is increased.
文摘A new method for the determination of DNA was developed with azocarmine G(AG) in the presence of cetyltrimethylammonium bromide(CTAB) by the resonance light scattering (RLS) technique. The synthetic samples were determined with satisfactory results, and the reaction mechanism was also studied. The results show that underthe optimum conditions, the weak RLS signal of AG can be enhanced by DNA, which results from the formation of a new ternary complex AG-CTAB-DNA with large size. Moreover, the enhanced RLS intensity at 552 nm is directlyproportional to the concentration of DNA in the range of 01.0 μg/mL for fish sperm DNA (fsDNA) and 01.5 μg/mLfor calf thymus DNA (ctDNA). Based on this, a new assay of DNA can be established. The detection limits (3σ) are 2.1 ng/mL for fsDNA and 2.2 ng/mL for ctDNA, respectively.
