A new approach for three dimensional (3-D) shape measurement was proposed based on colorcoded fringe and neural networks. By applying the phase-shift technique to fringe projection, point clouds were generated with hi...A new approach for three dimensional (3-D) shape measurement was proposed based on colorcoded fringe and neural networks. By applying the phase-shift technique to fringe projection, point clouds were generated with high spatial resolution and limited accuracy. The picture element correspondence problem was solved by using projected color-coded fringes with different orientations. Once the high accurate corresponding points were decided, high precision dense 3-D points cloud was calculated by the well trained net. High spatial resolution can be obtained by the phase-shift technique and high accuracy 3-D object point coordinates are achieved by the well trained net, which is not dependent on the camera model and will work for any type of camera. Some experiments verify the performance of this method.展开更多
Dithering optimization techniques can be divided into the phase-optimized technique and the intensity-optimized technique. The problem with the former is the poor sensitivity to various defocusing amounts, and the pro...Dithering optimization techniques can be divided into the phase-optimized technique and the intensity-optimized technique. The problem with the former is the poor sensitivity to various defocusing amounts, and the problem with the latter is that it cannot enhance phase quality directly nor efficiently. In this paper, we present a multi-objective optimization framework for three-dimensional(3D) measurement by utilizing binary defocusing technique. Moreover, a binary patch optimization technique is used to solve the time-consuming issue of genetic algorithm. It is demonstrated that the presented technique consistently obtains significant phase performance improvement under various defocusing amounts.展开更多
Although automobile is an indispensable vehicle to modern life, it also serves as a social problem with a big traffic accident. Among the reasons of traffic accidents, careless driving accounts for the largest part. S...Although automobile is an indispensable vehicle to modern life, it also serves as a social problem with a big traffic accident. Among the reasons of traffic accidents, careless driving accounts for the largest part. So in order to avoid the careless driving, a system which can measure the posture of a driver and warns driver to drive carefully in the case of looking aside is necessary. Although the image measurement method is used broadly, there is a problem on which measurement accuracy is influenced by environment light, makeup of the driver, etc. in the general method based on the two-dimensional image. Therefore, in this study, we propose an image measurement method to obtain the head posture of driver. First we use three-dimensional measurement method which based on the infrared pattern projection to get 3-D information of head, and then we calculate the angle for faces. In this paper, we explain the composition method of an experiment system, and the results of head posture measurement experiment.展开更多
A new 3D surface contouring and ranging system based on digital fringe projection and phase shifting technique is presented. Using the phase-shift technique, points cloud with high spatial resolution and limited accur...A new 3D surface contouring and ranging system based on digital fringe projection and phase shifting technique is presented. Using the phase-shift technique, points cloud with high spatial resolution and limited accuracy can be generated. Stereo-pair images obtained from two cameras can be used to compute 3D world coordinates of a point using traditional active triangulation approach, yet the camera calibration is crucial. Neural network is a well-known approach to approximate a nonlinear system without an explicit physical model, in this work it is used to train the stereo vision application system to calculating 3D world coordinates such that the camera calibration can be bypassed. The training set for neural network consists of a variety of stereo-pair images and the corresponding 3D world coordinates. The picture elements correspondence problem is solved by using projected color-coded fringes with different orientations. Color imbalance is completely eliminated by the new color-coded method. Once the high accuracy correspondence of 2D images with 3D points is acquired, high precision 3D points cloud can be recognized by the well trained net. The obvious advantage of this approach is that high spatial resolution can be obtained by the phase-shifting technique and high accuracy 3D object point coordinates are achieved by the well trained net which is independent of the camera model works for any type of camera. Some experiments verified the performance of the method.展开更多
The technique of phase measuring profilometry using a single phase step method is proposed.This method can automatically obtain phase value at each pixel by using a discret cosine transform algorithm.The method is abl...The technique of phase measuring profilometry using a single phase step method is proposed.This method can automatically obtain phase value at each pixel by using a discret cosine transform algorithm.The method is able to automatically recognize any position between depression and elevation on an object surface.Theoretical analysis and experimental verification are presented.展开更多
According to turbulent theory and characteristics of beam blank continuous casting, 3-D model to represent the flow of beam blank mould is established. The predicted results indicate that the exit obliquity of up 15&#...According to turbulent theory and characteristics of beam blank continuous casting, 3-D model to represent the flow of beam blank mould is established. The predicted results indicate that the exit obliquity of up 15°(+15°) should be adopted, which will benefit the floatation of non-metallic inclusion and purification of the molten steel. When the nozzle angle is 120°, the flow pattern is reasonable. Proper nozzle depth can be 200mm. Turbulent kinetic of meniscus can be reduced by adopting the square nozzle and suitable area of side outlet when casting speed increases. The results are consistent with those of water model experiment, so the model is exact and reasonable. The model can provide important information for design of SEN and defining of immersion depth.展开更多
The laser scanning and CCD image-transmitting measurement method and principle on acquiring 3-D curved surface shape data are discussed. Computer processing technique of 3-D curved surface shape(be called“ 3 - D surf...The laser scanning and CCD image-transmitting measurement method and principle on acquiring 3-D curved surface shape data are discussed. Computer processing technique of 3-D curved surface shape(be called“ 3 - D surface shape”for short) data is analysed. This technique in- cludes these concrete methods and principles such as data smoothing, fitting, reconstructing ,elimi- nating and so on. The example and result about computer processing of 3- D surface shape data are given .展开更多
For classifying unknown 3-D objects into a set of predetermined object classes, a part-level object classification method based on the improved interpretation tree is presented. The part-level representation is implem...For classifying unknown 3-D objects into a set of predetermined object classes, a part-level object classification method based on the improved interpretation tree is presented. The part-level representation is implemented, which enables a more compact shape description of 3-D objects. The proposed classification method consists of two key processing stages： the improved constrained search on an interpretation tree and the following shape similarity measure computation. By the classification method, both whole match and partial match with shape similarity ranks are achieved; especially, focus match can be accomplished, where different key parts may be labeled and all the matched models containing corresponding key parts may be obtained. A series of experiments show the effectiveness of the presented 3-D object classification method.展开更多
This paper presents a method for measurement of deviation of the real gear tooth surface from the theoretical one with a coordinate measurement machine and compensation of repeatable parts. By investigation of charact...This paper presents a method for measurement of deviation of the real gear tooth surface from the theoretical one with a coordinate measurement machine and compensation of repeatable parts. By investigation of characteristics of distortion of the gear tooth surface along the circle direction, the deviation is derived from distortion, and the definition of deviation with the geometrical invariability is proposed. Then the approach for determination of the location and orientation of the gear with respect to the coordinate measurement machine and the measurement way are developed. The deviation is represented with a difference surface, and an algorithm for derivation of parameters of global form deviations from the discrete points has been provided. Finally, the compensation approach is discussed.展开更多
This paper describes a multiple camera-based method to reconstruct the 3D shape of a human foot. From a foot database, an initial 3D model of the foot represented by a cloud of points is built. The shape parameters, w...This paper describes a multiple camera-based method to reconstruct the 3D shape of a human foot. From a foot database, an initial 3D model of the foot represented by a cloud of points is built. The shape parameters, which can characterize more than 92% of a foot, are defined by using the principal component analysis method. Then, using ＂active shape models＂, the initial 3D model is adapted to the real foot captured in multiple images by applying some constraints （edge points＇ distance and color variance）. We insist here on the experiment part where we demonstrate the efficiency of the proposed method on a plastic foot model, and also on real human feet with various shapes. We propose and compare different ways of texturing the foot which is needed for reconstruction. We present an experiment performed on the plastic foot model and on human feet and propose two different ways to improve the final 3D shapers accuracy according to the previous experiments＇ results. The first improvement proposed is the densification of the cloud of points used to represent the initial model and the foot database. The second improvement concerns the projected patterns used to texture the foot. We conclude by showing the obtained results for a human foot with the average computed shape error being only 1.06 mm.展开更多
Acquisition of tree inventory parameters such as tree position with respect to a local reference coordinate system, tree height, dbh （diameter breast height） and other associated tree attributes is a tedious process...Acquisition of tree inventory parameters such as tree position with respect to a local reference coordinate system, tree height, dbh （diameter breast height） and other associated tree attributes is a tedious process, time consuming, costly and labour intensive. An automatic collection and processing in the field could expedite the process of tree inventory survey and data management. The advent of handheld laser equipments such as the MDL LaserAce 300, should allow rapid acquisition of tree attributes. The instrument measures distances, differences in height and horizontal bearing automatically. This paper describes a study about the automated process of retrieving tree positions, their respective attributes and the creation of 3-D model （three-dimensional model）. A software developed in-house known as ASSIST （automated spatial survey information system） was utilized together with the MI）I, LaserAce 300, being the hardware component of the automated system. The capability of MDL LaserAce 9300 in extracting information regarding tree inventory attributes and the 3-D model encompassing the study area was investigated. The results were checked against the data sets acquired by a total station traversing and tacheometric survey respectively. The accuracy of the horizontal and vertical position of points gathered was critically assessed. The accuracy of the MDL LaserAce 300 was found to be less than ±2 m for both planimetric （horizontal） and vertical （height） in the construction of the 3-D model. The study demonstrates the effectiveness of a field-based automation system as a viable option to support forest application requirement.展开更多
Dredging plume dispersion studies, use dredging plume models to predict the fate of sediment plumes resulting from dredging activities and dredge spoil disposal. The model results are applied as input to environmental...Dredging plume dispersion studies, use dredging plume models to predict the fate of sediment plumes resulting from dredging activities and dredge spoil disposal. The model results are applied as input to environmental impact assessment of the proposed dredging, particularly those associated with suspended sediments and sedimentation. Model validation and performance are still not resolved because of the difficulty of site measurements and the understanding of the parameters used in the model. This paper presents a 3-D dredging plume model based on the MIKE3 software package to investigate parameters which affect the model performances. As a result of lack of site data for the public domain uses, the model scenarios are designed artificially for sensitive runs to identify the key parameters affecting plume behaviours. The factors include dredging spill rates using different dredging methods, equipment and sediment settling velocities. The influence of wave and wind effects combined with tidal forces on the sediment re-suspended rates and the advection/dispersion scales are also assessed.展开更多
In this paper,a high-accuracy 3-D deformation measurement(HADM)method with structured light is proposed and applied to wing deformation measurement in wind tunnel experiments.The present method employs an arbitrarily ...In this paper,a high-accuracy 3-D deformation measurement(HADM)method with structured light is proposed and applied to wing deformation measurement in wind tunnel experiments.The present method employs an arbitrarily arranged fringe projector and a perpendicularly placed camera.The exact phase-height mapping using the phase differences of the projected sinusoidal fringe patterns,as well as the spatial distribution of the fringe,is accurately derived.It not only presents high feasibility but also reduces systemic uncertainties arising from deviations between the ideal model and the real-world conditions.Meanwhile,a dynamic boundary process algorithm is proposed to reduce the measurement uncertainty caused by fringe fracture near the object boundary.It is calibrated that a high accuracy with the average measurement uncertainty of 0.0237 mm is achieved,which is less than 0.01%of the side length of 25 cm of the field of view.In the wind tunnel experiments,the 3-D deformations of the elastic wing,particularly the key geometric parameters such as wing tip position,angle of attack,and dihedral angle,are well reconstructed to provide an in-depth explanation for the aerodynamic characteristics.展开更多
On the basis of the objective functions,dithering optimization techniques can be divided into the intensity-based optimization technique and the phase-based optimization technique.However,both types of techniques are ...On the basis of the objective functions,dithering optimization techniques can be divided into the intensity-based optimization technique and the phase-based optimization technique.However,both types of techniques are spatial-domain optimization techniques,while their measurement performances are essentially determined by the harmonic components in the frequency domain.In this paper,a novel genetic optimization technique in the frequency domain is proposed for highquality fringe generation.In addition,to handle the time-consuming difficulty of genetic algorithm(GA),we first optimize a binary patch,then join the optimal binary patches together according to periodicity and symmetry so as to generate a full-size pattern.It is verified that the proposed technique can significantly enhance the measured performance and ensure the robustness to various amounts of defocusing.展开更多
A new phase unwrapping method based on dual-frequency fringe is proposed to improve both high accuracy and large measurement range of three-dimensional shape measurement by synthesizing the projected dual-frequency fr...A new phase unwrapping method based on dual-frequency fringe is proposed to improve both high accuracy and large measurement range of three-dimensional shape measurement by synthesizing the projected dual-frequency fringes obtaining higher and lower frequencies.The lower-frequency one is their phase difference,which can help unwrap the wrapped phase of the higher-frequency one from their phase sum.In addition,the relationship between the measuring accuracy and the frequencies of the projected fringes is studied to guide the frequency selection in actual measurement.It is found that the closer the two frequencies are,the higher the measurement accuracy will be.The computer simulation and experiment results show the viability of this method.展开更多
基金Supported by the Eleventh Five-Year Pre-Research Project of China
文摘A new approach for three dimensional (3-D) shape measurement was proposed based on colorcoded fringe and neural networks. By applying the phase-shift technique to fringe projection, point clouds were generated with high spatial resolution and limited accuracy. The picture element correspondence problem was solved by using projected color-coded fringes with different orientations. Once the high accurate corresponding points were decided, high precision dense 3-D points cloud was calculated by the well trained net. High spatial resolution can be obtained by the phase-shift technique and high accuracy 3-D object point coordinates are achieved by the well trained net, which is not dependent on the camera model and will work for any type of camera. Some experiments verify the performance of this method.
基金Project supported by the Zhejiang Provincial Welfare Technology Applied Research Project,China(Grant No.2017C31080)
文摘Dithering optimization techniques can be divided into the phase-optimized technique and the intensity-optimized technique. The problem with the former is the poor sensitivity to various defocusing amounts, and the problem with the latter is that it cannot enhance phase quality directly nor efficiently. In this paper, we present a multi-objective optimization framework for three-dimensional(3D) measurement by utilizing binary defocusing technique. Moreover, a binary patch optimization technique is used to solve the time-consuming issue of genetic algorithm. It is demonstrated that the presented technique consistently obtains significant phase performance improvement under various defocusing amounts.
文摘Although automobile is an indispensable vehicle to modern life, it also serves as a social problem with a big traffic accident. Among the reasons of traffic accidents, careless driving accounts for the largest part. So in order to avoid the careless driving, a system which can measure the posture of a driver and warns driver to drive carefully in the case of looking aside is necessary. Although the image measurement method is used broadly, there is a problem on which measurement accuracy is influenced by environment light, makeup of the driver, etc. in the general method based on the two-dimensional image. Therefore, in this study, we propose an image measurement method to obtain the head posture of driver. First we use three-dimensional measurement method which based on the infrared pattern projection to get 3-D information of head, and then we calculate the angle for faces. In this paper, we explain the composition method of an experiment system, and the results of head posture measurement experiment.
基金Supported by the Eleventh Five-Year Pre-research Project of China.
文摘A new 3D surface contouring and ranging system based on digital fringe projection and phase shifting technique is presented. Using the phase-shift technique, points cloud with high spatial resolution and limited accuracy can be generated. Stereo-pair images obtained from two cameras can be used to compute 3D world coordinates of a point using traditional active triangulation approach, yet the camera calibration is crucial. Neural network is a well-known approach to approximate a nonlinear system without an explicit physical model, in this work it is used to train the stereo vision application system to calculating 3D world coordinates such that the camera calibration can be bypassed. The training set for neural network consists of a variety of stereo-pair images and the corresponding 3D world coordinates. The picture elements correspondence problem is solved by using projected color-coded fringes with different orientations. Color imbalance is completely eliminated by the new color-coded method. Once the high accuracy correspondence of 2D images with 3D points is acquired, high precision 3D points cloud can be recognized by the well trained net. The obvious advantage of this approach is that high spatial resolution can be obtained by the phase-shifting technique and high accuracy 3D object point coordinates are achieved by the well trained net which is independent of the camera model works for any type of camera. Some experiments verified the performance of the method.
文摘The technique of phase measuring profilometry using a single phase step method is proposed.This method can automatically obtain phase value at each pixel by using a discret cosine transform algorithm.The method is able to automatically recognize any position between depression and elevation on an object surface.Theoretical analysis and experimental verification are presented.
文摘According to turbulent theory and characteristics of beam blank continuous casting, 3-D model to represent the flow of beam blank mould is established. The predicted results indicate that the exit obliquity of up 15°(+15°) should be adopted, which will benefit the floatation of non-metallic inclusion and purification of the molten steel. When the nozzle angle is 120°, the flow pattern is reasonable. Proper nozzle depth can be 200mm. Turbulent kinetic of meniscus can be reduced by adopting the square nozzle and suitable area of side outlet when casting speed increases. The results are consistent with those of water model experiment, so the model is exact and reasonable. The model can provide important information for design of SEN and defining of immersion depth.
文摘The laser scanning and CCD image-transmitting measurement method and principle on acquiring 3-D curved surface shape data are discussed. Computer processing technique of 3-D curved surface shape(be called“ 3 - D surface shape”for short) data is analysed. This technique in- cludes these concrete methods and principles such as data smoothing, fitting, reconstructing ,elimi- nating and so on. The example and result about computer processing of 3- D surface shape data are given .
基金The National Basic Research Program of China(973Program)(No2006CB303105)the Research Foundation of Bei-jing Jiaotong University (NoK06J0170)
文摘For classifying unknown 3-D objects into a set of predetermined object classes, a part-level object classification method based on the improved interpretation tree is presented. The part-level representation is implemented, which enables a more compact shape description of 3-D objects. The proposed classification method consists of two key processing stages： the improved constrained search on an interpretation tree and the following shape similarity measure computation. By the classification method, both whole match and partial match with shape similarity ranks are achieved; especially, focus match can be accomplished, where different key parts may be labeled and all the matched models containing corresponding key parts may be obtained. A series of experiments show the effectiveness of the presented 3-D object classification method.
文摘This paper presents a method for measurement of deviation of the real gear tooth surface from the theoretical one with a coordinate measurement machine and compensation of repeatable parts. By investigation of characteristics of distortion of the gear tooth surface along the circle direction, the deviation is derived from distortion, and the definition of deviation with the geometrical invariability is proposed. Then the approach for determination of the location and orientation of the gear with respect to the coordinate measurement machine and the measurement way are developed. The deviation is represented with a difference surface, and an algorithm for derivation of parameters of global form deviations from the discrete points has been provided. Finally, the compensation approach is discussed.
基金This work was supported by Grant-in-Aid for Scientific Research (C) (No.17500119)
文摘This paper describes a multiple camera-based method to reconstruct the 3D shape of a human foot. From a foot database, an initial 3D model of the foot represented by a cloud of points is built. The shape parameters, which can characterize more than 92% of a foot, are defined by using the principal component analysis method. Then, using ＂active shape models＂, the initial 3D model is adapted to the real foot captured in multiple images by applying some constraints （edge points＇ distance and color variance）. We insist here on the experiment part where we demonstrate the efficiency of the proposed method on a plastic foot model, and also on real human feet with various shapes. We propose and compare different ways of texturing the foot which is needed for reconstruction. We present an experiment performed on the plastic foot model and on human feet and propose two different ways to improve the final 3D shapers accuracy according to the previous experiments＇ results. The first improvement proposed is the densification of the cloud of points used to represent the initial model and the foot database. The second improvement concerns the projected patterns used to texture the foot. We conclude by showing the obtained results for a human foot with the average computed shape error being only 1.06 mm.
文摘Acquisition of tree inventory parameters such as tree position with respect to a local reference coordinate system, tree height, dbh （diameter breast height） and other associated tree attributes is a tedious process, time consuming, costly and labour intensive. An automatic collection and processing in the field could expedite the process of tree inventory survey and data management. The advent of handheld laser equipments such as the MDL LaserAce 300, should allow rapid acquisition of tree attributes. The instrument measures distances, differences in height and horizontal bearing automatically. This paper describes a study about the automated process of retrieving tree positions, their respective attributes and the creation of 3-D model （three-dimensional model）. A software developed in-house known as ASSIST （automated spatial survey information system） was utilized together with the MI）I, LaserAce 300, being the hardware component of the automated system. The capability of MDL LaserAce 9300 in extracting information regarding tree inventory attributes and the 3-D model encompassing the study area was investigated. The results were checked against the data sets acquired by a total station traversing and tacheometric survey respectively. The accuracy of the horizontal and vertical position of points gathered was critically assessed. The accuracy of the MDL LaserAce 300 was found to be less than ±2 m for both planimetric （horizontal） and vertical （height） in the construction of the 3-D model. The study demonstrates the effectiveness of a field-based automation system as a viable option to support forest application requirement.
文摘Dredging plume dispersion studies, use dredging plume models to predict the fate of sediment plumes resulting from dredging activities and dredge spoil disposal. The model results are applied as input to environmental impact assessment of the proposed dredging, particularly those associated with suspended sediments and sedimentation. Model validation and performance are still not resolved because of the difficulty of site measurements and the understanding of the parameters used in the model. This paper presents a 3-D dredging plume model based on the MIKE3 software package to investigate parameters which affect the model performances. As a result of lack of site data for the public domain uses, the model scenarios are designed artificially for sensitive runs to identify the key parameters affecting plume behaviours. The factors include dredging spill rates using different dredging methods, equipment and sediment settling velocities. The influence of wave and wind effects combined with tidal forces on the sediment re-suspended rates and the advection/dispersion scales are also assessed.
基金supported by the National Natural Science Foundation of China (Grant Nos.12127802 and 11721202)。
文摘In this paper,a high-accuracy 3-D deformation measurement(HADM)method with structured light is proposed and applied to wing deformation measurement in wind tunnel experiments.The present method employs an arbitrarily arranged fringe projector and a perpendicularly placed camera.The exact phase-height mapping using the phase differences of the projected sinusoidal fringe patterns,as well as the spatial distribution of the fringe,is accurately derived.It not only presents high feasibility but also reduces systemic uncertainties arising from deviations between the ideal model and the real-world conditions.Meanwhile,a dynamic boundary process algorithm is proposed to reduce the measurement uncertainty caused by fringe fracture near the object boundary.It is calibrated that a high accuracy with the average measurement uncertainty of 0.0237 mm is achieved,which is less than 0.01%of the side length of 25 cm of the field of view.In the wind tunnel experiments,the 3-D deformations of the elastic wing,particularly the key geometric parameters such as wing tip position,angle of attack,and dihedral angle,are well reconstructed to provide an in-depth explanation for the aerodynamic characteristics.
基金Project supported by the Science and Technology Major Projects of Zhejiang Province,China(Grant No.2017C31080)
文摘On the basis of the objective functions,dithering optimization techniques can be divided into the intensity-based optimization technique and the phase-based optimization technique.However,both types of techniques are spatial-domain optimization techniques,while their measurement performances are essentially determined by the harmonic components in the frequency domain.In this paper,a novel genetic optimization technique in the frequency domain is proposed for highquality fringe generation.In addition,to handle the time-consuming difficulty of genetic algorithm(GA),we first optimize a binary patch,then join the optimal binary patches together according to periodicity and symmetry so as to generate a full-size pattern.It is verified that the proposed technique can significantly enhance the measured performance and ensure the robustness to various amounts of defocusing.
基金supported by the National Natural Science Foundation of China(No.62075143)。
文摘A new phase unwrapping method based on dual-frequency fringe is proposed to improve both high accuracy and large measurement range of three-dimensional shape measurement by synthesizing the projected dual-frequency fringes obtaining higher and lower frequencies.The lower-frequency one is their phase difference,which can help unwrap the wrapped phase of the higher-frequency one from their phase sum.In addition,the relationship between the measuring accuracy and the frequencies of the projected fringes is studied to guide the frequency selection in actual measurement.It is found that the closer the two frequencies are,the higher the measurement accuracy will be.The computer simulation and experiment results show the viability of this method.
