The objective of this paper is to present a new method for designing absorbing or non-reflective boundary conditions (ABC) or (NRBC), illustrated by the case study of the modelling of a solid body in water, specifical...The objective of this paper is to present a new method for designing absorbing or non-reflective boundary conditions (ABC) or (NRBC), illustrated by the case study of the modelling of a solid body in water, specifically the capillary gravity waves generated by its motion at the surface. The study analyses the flow of an inviscid, barotropic, and compressible fluid around the stationary solid body. The dynamic behaviour of the fluid is analysed using a two-dimensional coupled Neumann-Kelvin model extended with capillarity and inertia terms. For computational purposes, it is necessary to truncate the unbounded spatial domain with artificial boundaries and then introduce appropriate absorbing boundary conditions. The propagation of short wavelength waves in a convective fluid medium with significant differences in properties between the interior and the surface of the fluid presents a number of difficulties in the design of these conditions. The results are illustrated numerically and commented upon.展开更多
Conventional seismic wave forward simulation generally uses mathematical means to solve the macroscopic wave equation,and then obtains the corresponding seismic wavefield.Usually,when the subsurface structure is finel...Conventional seismic wave forward simulation generally uses mathematical means to solve the macroscopic wave equation,and then obtains the corresponding seismic wavefield.Usually,when the subsurface structure is finely constructed and the continuity of media is poor,this strategy is difficult to meet the requirements of accurate wavefield calculation.This paper uses the multiple-relaxation-time lattice Boltzmann method(MRT-LBM)to conduct the seismic acoustic wavefield simulation and verify its computational accuracy.To cope with the problem of severe reflections at the truncated boundaries,we analogize the viscous absorbing boundary and perfectly matched layer(PML)absorbing boundary based on the single-relaxation-time lattice Boltzmann(SRT-LB)equation to the MRT-LB equation,and further,propose a joint absorbing boundary through comparative analysis.We give the specific forms of the modified MRT-LB equation loaded with the joint absorbing boundary in the two-dimensional(2D)and three-dimensional(3D)cases,respectively.Then,we verify the effects of this absorbing boundary scheme on a 2D homogeneous model,2D modified British Petroleum(BP)gas-cloud model,and 3D homogeneous model,respectively.The results reveal that by comparing with the viscous absorbing boundary and PML absorbing boundary,the joint absorbing boundary has the best absorption performance,although it is a little bit complicated.Therefore,this joint absorbing boundary better solves the problem of truncated boundary reflections of MRT-LBM in simulating seismic acoustic wavefields,which is pivotal to its wide application in the field of exploration seismology.展开更多
An accurate numerical simulation for wave equations is essential for understanding of wave propagation in the earth's interior as well as full waveform inversion and reverse time migration. However, due to computa...An accurate numerical simulation for wave equations is essential for understanding of wave propagation in the earth's interior as well as full waveform inversion and reverse time migration. However, due to computational cost and hardware capability limitations, numerical simulations are often performed within a finite domain. Thus, an adequate absorbing boundary condition (ABC) is indispensable for obtaining accurate numerical simulation results. In this study, we develop a hybrid ABC based on a transmitting boundary, which is referred to as THABC, to eliminate artificial boundary reflections in 3D second-order fractional viscoacoustic numerical simulations. Furthermore, we propose an adaptive weighted coefficient to reconcile the transmitting and viscoacoustic wavefields in THABC. Through several numerical examples, we determine that the proposed THABC approach is characterized by the following benefits. First, with the same number of absorbing layers, THABC exhibits a better ability in eliminating boundary reflection than traditional ABC schemes. Second, THABC is more effective in computation, since it only requires the wavefields at the current and last time steps to solve the transmitting formula within the absorbing layers. Benefiting from a simple but effective combination between the transmitting equation and the second-order wave equation, our scheme performs well in the 3D fractional Laplacian viscoacoustic numerical simulation.展开更多
We apply the newly proposed double absorbing boundary condition（DABC）（Hagstrom et al., 2014） to solve the boundary reflection problem in seismic finite-difference（FD） modeling. In the DABC scheme, the local high...We apply the newly proposed double absorbing boundary condition（DABC）（Hagstrom et al., 2014） to solve the boundary reflection problem in seismic finite-difference（FD） modeling. In the DABC scheme, the local high-order absorbing boundary condition is used on two parallel artificial boundaries, and thus double absorption is achieved. Using the general 2D acoustic wave propagation equations as an example, we use the DABC in seismic FD modeling, and discuss the derivation and implementation steps in detail. Compared with the perfectly matched layer（PML）, the complexity decreases, and the stability and fl exibility improve. A homogeneous model and the SEG salt model are selected for numerical experiments. The results show that absorption using the DABC is considerably improved relative to the Clayton–Engquist boundary condition and nearly the same as that in the PML.展开更多
The perfectly matched layer （PML） is a highly efficient absorbing boundary condition used for the numerical modeling of seismic wave equation. The article focuses on the application of this technique to finite-eleme...The perfectly matched layer （PML） is a highly efficient absorbing boundary condition used for the numerical modeling of seismic wave equation. The article focuses on the application of this technique to finite-element time-domain numerical modeling of elastic wave equation. However, the finite-element time-domain scheme is based on the second- order wave equation in displacement formulation. Thus, the first-order PML in velocity-stress formulation cannot be directly applied to this scheme. In this article, we derive the finite- element matrix equations of second-order PML in displacement formulation, and accomplish the implementation of PML in finite-element time-domain modeling of elastic wave equation. The PML has an approximate zero reflection coefficients for bulk and surface waves in the finite-element modeling of P-SV and SH wave propagation in the 2D homogeneous elastic media. The numerical experiments using a two-layer model with irregular topography validate the efficiency of PML in the modeling of seismic wave propagation in geological models with complex structures and heterogeneous media.展开更多
With the linear interpolation method, an improved absorbing boundary condition（ABC）is introduced and derived, which is suitable for the alternating-direction-implicit finite- difference time-domain （ADI-FDTD） meth...With the linear interpolation method, an improved absorbing boundary condition（ABC）is introduced and derived, which is suitable for the alternating-direction-implicit finite- difference time-domain （ADI-FDTD） method. The reflection of the ABC caused by both the truncated error and the phase velocity error is analyzed. Based on the phase velocity estimation and the nonuniform cell, two methods are studied and then adopted to improve the performance of the ABC. A calculation case of a rectangular waveguide which is a typical dispersive transmission line is carried out using the ADI-FDTD method with the improved ABC for evaluation. According to the calculated case, the comparison is given between the reflection coefficients of the ABC with and without the velocity estimation and also the comparison between the reflection coefficients of the ABC with and without the nonuniform processing. The reflection variation of the ABC under different time steps is also analyzed and the acceptable worsening will not obscure the improvement on the absorption. Numerical results obviously show that efficient improvement on the absorbing performance of the ABC is achieved based on these methods for the ADI-FDTD.展开更多
Edge reflections are inevitable in numerical modeling of seismic wavefields, and they are usually attenuated by absorbing boundary conditions. However, the commonly used perfectly matched layer （PML） boundary condit...Edge reflections are inevitable in numerical modeling of seismic wavefields, and they are usually attenuated by absorbing boundary conditions. However, the commonly used perfectly matched layer （PML） boundary condition requires special treatment for the absorbing zone, and in three-dimensional （3D） modeling, it has to split each variable into three corresponding variables, which increases the computing time and memory storage. In contrast, the hybrid absorbing boundary condition （HABC） has the advantages such as ease of implementation, less computation time, and near-perfect absorption; it is thus able to enhance the computational efficiency of 3D elastic wave modeling. In this study, a HABC is developed from two-dimensional （2D） modeling into 3D modeling based on the I st Higdon one way wave equations, and a HABC is proposed that is suitable for a 3D elastic wave numerical simulation. Numerical simulation results for a homogenous model and a complex model indicate that the proposed HABC method is more effective and has better absorption than the traditional PML method.展开更多
In this paper the explanation of the mechanism of high-frequency oscillation instability resulted from absorbing boundary conditions is further improved. And we analytically prove the proposition that for one dimensio...In this paper the explanation of the mechanism of high-frequency oscillation instability resulted from absorbing boundary conditions is further improved. And we analytically prove the proposition that for one dimensional discrete model of elastic wave motion, the module of reflection factor will be greater than 1 in high frequency band when artificial wave velocity is greater than 1.5 times the ratio of discrete space step to discrete time step. Based on the proof, the frequency band in which instability occurs is discussed in detail, showing such high-frequency waves are meaningless for the numerical simulation of wave motion.展开更多
This paper deals with absorbing boundary conditions for hyperbolic systems in one and two space dimensions.We prove the strict well-posedness of the resulting initial boundary value problem in 1D.Afterwards we establi...This paper deals with absorbing boundary conditions for hyperbolic systems in one and two space dimensions.We prove the strict well-posedness of the resulting initial boundary value problem in 1D.Afterwards we establish the GKS-stability of the corresponding Lax-Wendroff-type finite difference scheme.Hereby,we have to extend the classical proofs,since the(discretized) absorbing boundary conditions do not fit the standard form of boundary conditions for hyperbolic systems.展开更多
A new absorbing boundary condition (ABC) for frequency dependent finite difference time domain algorithm for the arbitrary dispersive media is presented. The concepts of the digital systems are introduced to the (F...A new absorbing boundary condition (ABC) for frequency dependent finite difference time domain algorithm for the arbitrary dispersive media is presented. The concepts of the digital systems are introduced to the (FD) 2TD method. On the basis of digital filter designing and vector algebra, the absorbing boundary condition under arbitrary angle of incidence are derived. The transient electromagnetic problems in two dimensions and three dimensions are calculated and the validity of the ABC is verified.展开更多
In elastic wave forward modeling, absorbing boundary conditions （ABC） are used to mitigate undesired reflections from the model truncation boundaries. The perfectly matched layer （PML） has proved to be the best av...In elastic wave forward modeling, absorbing boundary conditions （ABC） are used to mitigate undesired reflections from the model truncation boundaries. The perfectly matched layer （PML） has proved to be the best available ABC. However, the traditional splitting PML （SPML） ABC has some serious disadvantages： for example, global SPML ABCs require much more computing memory, although the implementation is easy. The implementation of local SPML ABCs also has some difficulties, since edges and corners must be considered. The traditional non-splitting perfectly matched layer （NPML） ABC has complex computation because of the convolution. In this paper, based on non-splitting perfectly matched layer （NPML） ABCs combined with the complex frequency-shifted stretching function （CFS）, we introduce a novel numerical implementation method for PML absorbing boundary conditions with simple calculation equations, small memory requirement, and easy programming.展开更多
It is well-known that artificial boundary conditions are crucial for the efficient and accurate computations of wavefields on unbounded domains. In this paper, we investigate stability analysis for the wave equation c...It is well-known that artificial boundary conditions are crucial for the efficient and accurate computations of wavefields on unbounded domains. In this paper, we investigate stability analysis for the wave equation coupled with the first and the second order absorbing boundary conditions. The computational scheme is also developed. The approach allows the absorbing boundary conditions to be naturally imposed, which makes it easier for us to construct high order schemes for the absorbing boundary conditions. A thirdorder Lagrange finite element method with mass lumping is applied to obtain the spatial discretization of the wave equation. The resulting scheme is stable and is very efficient since no matrix inversion is needed at each time step. Moreover, we have shown both abstract and explicit conditional stability results for the fully-discrete schemes. The results are helpful for designing computational parameters in computations. Numerical computations are illustrated to show the efficiency and accuracy of our method. In particular, essentially no boundary reflection is seen at the artificial boundaries.展开更多
The perfectly matched layer（PML） was first introduced by Berenger as an absorbing boundary condition for electromagnetic wave propagation.In this article,a method is developed to ex-tend the PML to simulating seismi...The perfectly matched layer（PML） was first introduced by Berenger as an absorbing boundary condition for electromagnetic wave propagation.In this article,a method is developed to ex-tend the PML to simulating seismic wave propagation in fluid-saturated porous medium.This non-physical boundary is used at the computational edge of a Forsyte polynomial convolutional differenti-ator（FPCD） algorithm as an absorbing boundary condition to truncate unbounded media.The incor-poration of PML in Biot＇s equations is given.Numerical results show that the PML absorbing bound-ary condition attenuates the outgoing waves effectively and eliminates the reflections adequately.展开更多
With the development of numerical methods the numerical computations require higher and higher accuracy. This paper is devoted to the high-order local absorbing boundary conditions （ABCs） for heat equation. We prove...With the development of numerical methods the numerical computations require higher and higher accuracy. This paper is devoted to the high-order local absorbing boundary conditions （ABCs） for heat equation. We proved that the coupled system yields a stable problem between the obtained high-order local ABCs and the partial differential equation in the computational domain. This method has been used widely in wave propagation models only recently. We extend the spirit of the methodology to parabolic ones, which will become a basis to design the local ABCs for a class of nonlinear PDEs. Some numerical tests show that the new treatment is very efficient and tractable.展开更多
Outgoing waves arising from high-velocity impacts between soil and structure can be reflected by the conventional truncated boundaries.Absorbing boundary conditions(ABCs),to attenuate the energy of the outward waves,a...Outgoing waves arising from high-velocity impacts between soil and structure can be reflected by the conventional truncated boundaries.Absorbing boundary conditions(ABCs),to attenuate the energy of the outward waves,are necessary to ensure the proper representation of the kinematic field and the accurate quantification of impact forces.In this paper,damping layer and dashpot ABCs are implemented in the material point method(MPM)with slight adjustments.Benchmark scenarios of different dynamic problems are modelled with the ABCs configured.Feasibility of the ABCs is assessed through the velocity fluctuations at specific observation points and the impact force fluctuations on the structures.The impact forces predicted by the MPM with ABCs are verified by comparison with those estimated using a computational fluid dynamics approach.展开更多
This paper presents an absorbing boundary conditions(ABCs)for wave propagations on arbitrary computational domains.The purpose of ABCs is to eliminate the unwanted spurious reflection at the artificial boundaries and ...This paper presents an absorbing boundary conditions(ABCs)for wave propagations on arbitrary computational domains.The purpose of ABCs is to eliminate the unwanted spurious reflection at the artificial boundaries and minimize the finite size effect.Traditional methods are usually complicate in theoretical derivation and implementation and work only for very limited types of boundary geometry.In contrast to other existing methods,our emphasis is placed on the ease of implementation.In particular,we propose a method for which the implementation can be done by fitting or learning from the simulation data in a larger domain,and it is insensitive to the geometry and space dimension of the computational domain.Furthermore,a stability criterion is imposed to ensure the stability of the proposed ABC.Numerical results are presented to demonstrate the effectiveness of our method.展开更多
This paper employs finite element method to solve shallow water equations with absorbing boundary conditions(the third kind,mixed boundary conditions).It is of practical importance in the cases that the land boundarie...This paper employs finite element method to solve shallow water equations with absorbing boundary conditions(the third kind,mixed boundary conditions).It is of practical importance in the cases that the land boundaries of the coastal area are made of porous medium allowing sea water flow in or out.The absorbing boundary conditions are treated as natural boundary conditions in wave equation finite element model.The numerical results for rectangu- lar and quarterly annular harbors indicate that the numerical solutions agree very well with ana- lytic solutions,which are also given in this paper.It is found that the land boundary absorbabili- ty may be significant to long wave oscillations,such as tidal waves in coastal harbors.展开更多
The performances of absorbing boundary conditions （ABCs） in four widely used finite difference time domain （FDTD） methods, i.e. explicit, implicit, explicit staggered-time, and Chebyshev methods, for solving the t...The performances of absorbing boundary conditions （ABCs） in four widely used finite difference time domain （FDTD） methods, i.e. explicit, implicit, explicit staggered-time, and Chebyshev methods, for solving the time-dependent Schrodinger equation are assessed and compared. The computation efficiency for each approach is also evaluated. A typical evolution problem of a single Gaussian wave packet is chosen to demonstrate the performances of the four methods combined with ABCs. It is found that ABCs perfectly eliminate reflection in implicit and explicit staggered-time methods. However, small reflection still exists in explicit and Chebyshev methods even though ABCs are applied.展开更多
In this paper we get one-way wave equations by using pseudo-differential operator theory,and present a set of absorbing boundary conditions based on the higher order aPProximations of oneway wave equations. An integra...In this paper we get one-way wave equations by using pseudo-differential operator theory,and present a set of absorbing boundary conditions based on the higher order aPProximations of oneway wave equations. An integral identity is the key point of the approximation. Also, we have provedthe well-posedness of the initial boundary value Problems related to our absorbing boundary conditionsconstructed in this artical.展开更多
We propose a hierarchy of novel absorbing boundary conditions for the onedimensional stationary Schr¨odinger equation with general(linear and nonlinear)potential.The accuracy of the new absorbing boundary conditi...We propose a hierarchy of novel absorbing boundary conditions for the onedimensional stationary Schr¨odinger equation with general(linear and nonlinear)potential.The accuracy of the new absorbing boundary conditions is investigated numerically for the computation of energies and ground-states for linear and nonlinear Schr¨odinger equations.It turns out that these absorbing boundary conditions and their variants lead to a higher accuracy than the usual Dirichlet boundary condition.Finally,we give the extension of these ABCs to N-dimensional stationary Schr¨odinger equations.展开更多
文摘The objective of this paper is to present a new method for designing absorbing or non-reflective boundary conditions (ABC) or (NRBC), illustrated by the case study of the modelling of a solid body in water, specifically the capillary gravity waves generated by its motion at the surface. The study analyses the flow of an inviscid, barotropic, and compressible fluid around the stationary solid body. The dynamic behaviour of the fluid is analysed using a two-dimensional coupled Neumann-Kelvin model extended with capillarity and inertia terms. For computational purposes, it is necessary to truncate the unbounded spatial domain with artificial boundaries and then introduce appropriate absorbing boundary conditions. The propagation of short wavelength waves in a convective fluid medium with significant differences in properties between the interior and the surface of the fluid presents a number of difficulties in the design of these conditions. The results are illustrated numerically and commented upon.
基金This work is supported in part by the National Natural Science Foundation of China(U19B6003-04-01,42204132,41874130)R&D Department of CNPC(2022DQ0604-01)China Postdoctoral Science Foundation(2020M680667,2021T140661).
文摘Conventional seismic wave forward simulation generally uses mathematical means to solve the macroscopic wave equation,and then obtains the corresponding seismic wavefield.Usually,when the subsurface structure is finely constructed and the continuity of media is poor,this strategy is difficult to meet the requirements of accurate wavefield calculation.This paper uses the multiple-relaxation-time lattice Boltzmann method(MRT-LBM)to conduct the seismic acoustic wavefield simulation and verify its computational accuracy.To cope with the problem of severe reflections at the truncated boundaries,we analogize the viscous absorbing boundary and perfectly matched layer(PML)absorbing boundary based on the single-relaxation-time lattice Boltzmann(SRT-LB)equation to the MRT-LB equation,and further,propose a joint absorbing boundary through comparative analysis.We give the specific forms of the modified MRT-LB equation loaded with the joint absorbing boundary in the two-dimensional(2D)and three-dimensional(3D)cases,respectively.Then,we verify the effects of this absorbing boundary scheme on a 2D homogeneous model,2D modified British Petroleum(BP)gas-cloud model,and 3D homogeneous model,respectively.The results reveal that by comparing with the viscous absorbing boundary and PML absorbing boundary,the joint absorbing boundary has the best absorption performance,although it is a little bit complicated.Therefore,this joint absorbing boundary better solves the problem of truncated boundary reflections of MRT-LBM in simulating seismic acoustic wavefields,which is pivotal to its wide application in the field of exploration seismology.
基金National Natural Science Foundation of China under Grant Nos.41930431 and 41974116Natural Science Foundation of Heilongjiang Province No.YQ2021D008CNPC Innovation Found No.2021DQ02-0302 for supporting this work.
文摘An accurate numerical simulation for wave equations is essential for understanding of wave propagation in the earth's interior as well as full waveform inversion and reverse time migration. However, due to computational cost and hardware capability limitations, numerical simulations are often performed within a finite domain. Thus, an adequate absorbing boundary condition (ABC) is indispensable for obtaining accurate numerical simulation results. In this study, we develop a hybrid ABC based on a transmitting boundary, which is referred to as THABC, to eliminate artificial boundary reflections in 3D second-order fractional viscoacoustic numerical simulations. Furthermore, we propose an adaptive weighted coefficient to reconcile the transmitting and viscoacoustic wavefields in THABC. Through several numerical examples, we determine that the proposed THABC approach is characterized by the following benefits. First, with the same number of absorbing layers, THABC exhibits a better ability in eliminating boundary reflection than traditional ABC schemes. Second, THABC is more effective in computation, since it only requires the wavefields at the current and last time steps to solve the transmitting formula within the absorbing layers. Benefiting from a simple but effective combination between the transmitting equation and the second-order wave equation, our scheme performs well in the 3D fractional Laplacian viscoacoustic numerical simulation.
基金supported by the National Nature Science Foundation of China(Grant No.U1262208)the Important National Science & Technology Specific Projects(Grant No.2011ZX05019-008)
文摘We apply the newly proposed double absorbing boundary condition（DABC）（Hagstrom et al., 2014） to solve the boundary reflection problem in seismic finite-difference（FD） modeling. In the DABC scheme, the local high-order absorbing boundary condition is used on two parallel artificial boundaries, and thus double absorption is achieved. Using the general 2D acoustic wave propagation equations as an example, we use the DABC in seismic FD modeling, and discuss the derivation and implementation steps in detail. Compared with the perfectly matched layer（PML）, the complexity decreases, and the stability and fl exibility improve. A homogeneous model and the SEG salt model are selected for numerical experiments. The results show that absorption using the DABC is considerably improved relative to the Clayton–Engquist boundary condition and nearly the same as that in the PML.
基金sponsored by the National Natural Science Foundation of China Research(Grant No.41274138)the Science Foundation of China University of Petroleum(Beijing)(No.KYJJ2012-05-02)
文摘The perfectly matched layer （PML） is a highly efficient absorbing boundary condition used for the numerical modeling of seismic wave equation. The article focuses on the application of this technique to finite-element time-domain numerical modeling of elastic wave equation. However, the finite-element time-domain scheme is based on the second- order wave equation in displacement formulation. Thus, the first-order PML in velocity-stress formulation cannot be directly applied to this scheme. In this article, we derive the finite- element matrix equations of second-order PML in displacement formulation, and accomplish the implementation of PML in finite-element time-domain modeling of elastic wave equation. The PML has an approximate zero reflection coefficients for bulk and surface waves in the finite-element modeling of P-SV and SH wave propagation in the 2D homogeneous elastic media. The numerical experiments using a two-layer model with irregular topography validate the efficiency of PML in the modeling of seismic wave propagation in geological models with complex structures and heterogeneous media.
基金The National Natural Science Foundation of China(No.60702027)the Free Research Fund of the National Mobile Communications Research Laboratory of Southeast University (No.2008B07)the National Basic Research Program of China(973 Program)(No.2007CB310603)
文摘With the linear interpolation method, an improved absorbing boundary condition（ABC）is introduced and derived, which is suitable for the alternating-direction-implicit finite- difference time-domain （ADI-FDTD） method. The reflection of the ABC caused by both the truncated error and the phase velocity error is analyzed. Based on the phase velocity estimation and the nonuniform cell, two methods are studied and then adopted to improve the performance of the ABC. A calculation case of a rectangular waveguide which is a typical dispersive transmission line is carried out using the ADI-FDTD method with the improved ABC for evaluation. According to the calculated case, the comparison is given between the reflection coefficients of the ABC with and without the velocity estimation and also the comparison between the reflection coefficients of the ABC with and without the nonuniform processing. The reflection variation of the ABC under different time steps is also analyzed and the acceptable worsening will not obscure the improvement on the absorption. Numerical results obviously show that efficient improvement on the absorbing performance of the ABC is achieved based on these methods for the ADI-FDTD.
基金supported by the National Natural Science Foundation of China(No.41474110)
文摘Edge reflections are inevitable in numerical modeling of seismic wavefields, and they are usually attenuated by absorbing boundary conditions. However, the commonly used perfectly matched layer （PML） boundary condition requires special treatment for the absorbing zone, and in three-dimensional （3D） modeling, it has to split each variable into three corresponding variables, which increases the computing time and memory storage. In contrast, the hybrid absorbing boundary condition （HABC） has the advantages such as ease of implementation, less computation time, and near-perfect absorption; it is thus able to enhance the computational efficiency of 3D elastic wave modeling. In this study, a HABC is developed from two-dimensional （2D） modeling into 3D modeling based on the I st Higdon one way wave equations, and a HABC is proposed that is suitable for a 3D elastic wave numerical simulation. Numerical simulation results for a homogenous model and a complex model indicate that the proposed HABC method is more effective and has better absorption than the traditional PML method.
基金Basic Scientific Research-related Project from Institute of Engineering Mechanics (01180001 and 2007C01)
文摘In this paper the explanation of the mechanism of high-frequency oscillation instability resulted from absorbing boundary conditions is further improved. And we analytically prove the proposition that for one dimensional discrete model of elastic wave motion, the module of reflection factor will be greater than 1 in high frequency band when artificial wave velocity is greater than 1.5 times the ratio of discrete space step to discrete time step. Based on the proof, the frequency band in which instability occurs is discussed in detail, showing such high-frequency waves are meaningless for the numerical simulation of wave motion.
文摘This paper deals with absorbing boundary conditions for hyperbolic systems in one and two space dimensions.We prove the strict well-posedness of the resulting initial boundary value problem in 1D.Afterwards we establish the GKS-stability of the corresponding Lax-Wendroff-type finite difference scheme.Hereby,we have to extend the classical proofs,since the(discretized) absorbing boundary conditions do not fit the standard form of boundary conditions for hyperbolic systems.
文摘A new absorbing boundary condition (ABC) for frequency dependent finite difference time domain algorithm for the arbitrary dispersive media is presented. The concepts of the digital systems are introduced to the (FD) 2TD method. On the basis of digital filter designing and vector algebra, the absorbing boundary condition under arbitrary angle of incidence are derived. The transient electromagnetic problems in two dimensions and three dimensions are calculated and the validity of the ABC is verified.
基金sponsored by the Chinese National Development and Reform Commission(No.[2005]2372)the Innovative Technological Research Foundation of PetroChina Company Limited(No.060511-1-3)
文摘In elastic wave forward modeling, absorbing boundary conditions （ABC） are used to mitigate undesired reflections from the model truncation boundaries. The perfectly matched layer （PML） has proved to be the best available ABC. However, the traditional splitting PML （SPML） ABC has some serious disadvantages： for example, global SPML ABCs require much more computing memory, although the implementation is easy. The implementation of local SPML ABCs also has some difficulties, since edges and corners must be considered. The traditional non-splitting perfectly matched layer （NPML） ABC has complex computation because of the convolution. In this paper, based on non-splitting perfectly matched layer （NPML） ABCs combined with the complex frequency-shifted stretching function （CFS）, we introduce a novel numerical implementation method for PML absorbing boundary conditions with simple calculation equations, small memory requirement, and easy programming.
文摘It is well-known that artificial boundary conditions are crucial for the efficient and accurate computations of wavefields on unbounded domains. In this paper, we investigate stability analysis for the wave equation coupled with the first and the second order absorbing boundary conditions. The computational scheme is also developed. The approach allows the absorbing boundary conditions to be naturally imposed, which makes it easier for us to construct high order schemes for the absorbing boundary conditions. A thirdorder Lagrange finite element method with mass lumping is applied to obtain the spatial discretization of the wave equation. The resulting scheme is stable and is very efficient since no matrix inversion is needed at each time step. Moreover, we have shown both abstract and explicit conditional stability results for the fully-discrete schemes. The results are helpful for designing computational parameters in computations. Numerical computations are illustrated to show the efficiency and accuracy of our method. In particular, essentially no boundary reflection is seen at the artificial boundaries.
基金supported by the National Natural ScienceFoundation of China (No. 40804008)
文摘The perfectly matched layer（PML） was first introduced by Berenger as an absorbing boundary condition for electromagnetic wave propagation.In this article,a method is developed to ex-tend the PML to simulating seismic wave propagation in fluid-saturated porous medium.This non-physical boundary is used at the computational edge of a Forsyte polynomial convolutional differenti-ator（FPCD） algorithm as an absorbing boundary condition to truncate unbounded media.The incor-poration of PML in Biot＇s equations is given.Numerical results show that the PML absorbing bound-ary condition attenuates the outgoing waves effectively and eliminates the reflections adequately.
文摘With the development of numerical methods the numerical computations require higher and higher accuracy. This paper is devoted to the high-order local absorbing boundary conditions （ABCs） for heat equation. We proved that the coupled system yields a stable problem between the obtained high-order local ABCs and the partial differential equation in the computational domain. This method has been used widely in wave propagation models only recently. We extend the spirit of the methodology to parabolic ones, which will become a basis to design the local ABCs for a class of nonlinear PDEs. Some numerical tests show that the new treatment is very efficient and tractable.
基金the Key Science and Technology Plan of Power China Huadong Engineering Corporation(No.KY2018-ZD-01)China and the National Natural Science Foundations of China(No.51909248)。
文摘Outgoing waves arising from high-velocity impacts between soil and structure can be reflected by the conventional truncated boundaries.Absorbing boundary conditions(ABCs),to attenuate the energy of the outward waves,are necessary to ensure the proper representation of the kinematic field and the accurate quantification of impact forces.In this paper,damping layer and dashpot ABCs are implemented in the material point method(MPM)with slight adjustments.Benchmark scenarios of different dynamic problems are modelled with the ABCs configured.Feasibility of the ABCs is assessed through the velocity fluctuations at specific observation points and the impact force fluctuations on the structures.The impact forces predicted by the MPM with ABCs are verified by comparison with those estimated using a computational fluid dynamics approach.
基金upported by the National Natural Science Foundation of China(Grant Nos.11671312,91630313)by the Natural Science Foundation of Hubei Province No.2019CFA007.
文摘This paper presents an absorbing boundary conditions(ABCs)for wave propagations on arbitrary computational domains.The purpose of ABCs is to eliminate the unwanted spurious reflection at the artificial boundaries and minimize the finite size effect.Traditional methods are usually complicate in theoretical derivation and implementation and work only for very limited types of boundary geometry.In contrast to other existing methods,our emphasis is placed on the ease of implementation.In particular,we propose a method for which the implementation can be done by fitting or learning from the simulation data in a larger domain,and it is insensitive to the geometry and space dimension of the computational domain.Furthermore,a stability criterion is imposed to ensure the stability of the proposed ABC.Numerical results are presented to demonstrate the effectiveness of our method.
文摘This paper employs finite element method to solve shallow water equations with absorbing boundary conditions(the third kind,mixed boundary conditions).It is of practical importance in the cases that the land boundaries of the coastal area are made of porous medium allowing sea water flow in or out.The absorbing boundary conditions are treated as natural boundary conditions in wave equation finite element model.The numerical results for rectangu- lar and quarterly annular harbors indicate that the numerical solutions agree very well with ana- lytic solutions,which are also given in this paper.It is found that the land boundary absorbabili- ty may be significant to long wave oscillations,such as tidal waves in coastal harbors.
基金supported by the State Key Development Program for Basic Research of China (No. 2006CB932404)
文摘The performances of absorbing boundary conditions （ABCs） in four widely used finite difference time domain （FDTD） methods, i.e. explicit, implicit, explicit staggered-time, and Chebyshev methods, for solving the time-dependent Schrodinger equation are assessed and compared. The computation efficiency for each approach is also evaluated. A typical evolution problem of a single Gaussian wave packet is chosen to demonstrate the performances of the four methods combined with ABCs. It is found that ABCs perfectly eliminate reflection in implicit and explicit staggered-time methods. However, small reflection still exists in explicit and Chebyshev methods even though ABCs are applied.
文摘In this paper we get one-way wave equations by using pseudo-differential operator theory,and present a set of absorbing boundary conditions based on the higher order aPProximations of oneway wave equations. An integral identity is the key point of the approximation. Also, we have provedthe well-posedness of the initial boundary value Problems related to our absorbing boundary conditionsconstructed in this artical.
基金supported by the French ANR fundings under the project MicroWave NT09_460489.
文摘We propose a hierarchy of novel absorbing boundary conditions for the onedimensional stationary Schr¨odinger equation with general(linear and nonlinear)potential.The accuracy of the new absorbing boundary conditions is investigated numerically for the computation of energies and ground-states for linear and nonlinear Schr¨odinger equations.It turns out that these absorbing boundary conditions and their variants lead to a higher accuracy than the usual Dirichlet boundary condition.Finally,we give the extension of these ABCs to N-dimensional stationary Schr¨odinger equations.
