BACKGROUND Radiologic adjacent segment degeneration(ASDeg)can occur after spinal surgery.Adjacent segment disease(ASDis)is defined as the development of new clinical symptoms corresponding to radiographic changes adja...BACKGROUND Radiologic adjacent segment degeneration(ASDeg)can occur after spinal surgery.Adjacent segment disease(ASDis)is defined as the development of new clinical symptoms corresponding to radiographic changes adjacent to the level of previous spinal surgery.Greater pre-existing ASDeg is generally considered to result in more severe ASDis;nonetheless,whether the ASDeg status before index surgery influences the postoperative risk of revision surgery due to ASDis warrants investigation.AIM To identify possible risk factors for ASDis and verify the concept that greater preexisting ASDeg leads to more severe ASDis.METHODS Data from 212 patients who underwent posterior decompression with Dynesys stabilization from January 2006 to June 2016 were retrospectively analyzed.Patients who underwent surgery for ASDis were categorized as group A(n=13),whereas those who did not were classified as group B(n=199).Survival analysis and Cox proportional hazards models were used to compare the modified Pfirrmann grade,University of California-Los Angeles grade,body mass index,number of Dynesys-instrumented levels,and age.RESULTS The mean time of reoperation was 7.22(1.65–11.84)years in group A,and the mean follow-up period was 6.09(0.10–12.76)years in group B.No significant difference in reoperation risk was observed:Modified Pfirrmann grade 3 vs 4(P=0.53)or 4 vs 5(P=0.46)for the upper adjacent disc,University of California-Los Angeles grade 2 vs 3 for the upper adjacent segment(P=0.66),age of<60 vs>60 years(P=0.9),body mass index<25 vs>25 kg/m2(P=0.3),and sex(P=0.8).CONCLUSION Greater preexisting upper ASDeg was not associated with a higher rate of reoperation for ASDis after Dynesys surgery.Being overweight tended to increase reoperation risk after Dynesys surgery for ASDis.展开更多
Study Design: This is a retrospective cohort study using data from the adult spinal deformity (ASD) database of a single institution. Purpose: To investigate the incidence of proximal junctional failure and distal jun...Study Design: This is a retrospective cohort study using data from the adult spinal deformity (ASD) database of a single institution. Purpose: To investigate the incidence of proximal junctional failure and distal junctional failure (DJF) after ASD surgery with a lower instrumented vertebra (LIV) at L5. Overview of Literature: Spinopelvic fixation from the lower thoracic vertebra to the pelvis is the current gold standard treatment for ASD. However, the LIV at L5 is acceptable in some cases. Methods: Fifty-six patients who underwent corrective surgery for ASD with LIV at L5 were included. The upper instrumented vertebra (UIV) was T7 in one patient, T9 in 14, T10 in three, T11 in four, T12 in eight, L1 in 10, and L2 in 16. Regarding clinical parameters, age, sex, curve types of Scoliosis Research Society-Schwab classification, number of levels fused, follow-up period, hip bone mallow density, revision surgery rate, and radiographic measurements were compared between the T (UIV: T7 - 10) and TL (UIV: T11 - L2) groups. Results: The revision surgery rate was 19.6% overall. In the T and TL groups, it was 27.8%, and 15.8%, respectively (p = 0.305). The rate of DJF in the T group (33.3%) was significantly higher than in the TL group (5.3%). The rate of proximal junctional kyphosis in the T group (55.6%) was higher than in the TL group (28.9%), with no significant difference. The mean global alignment, sagittal vertical axis, and C7 plumb line-central sacral vertical line were not different between both groups. Conclusions: ASD surgery with LIV set at L5 and UIV set at the thoracic vertebrae (T7 - T10) has a risk of adjacent segment disease.展开更多
The prone transpsoas approach is a relatively new technique to correct segmental kyphosis and global sagittal imbalance in a minimally invasive fashion. Here, we provide a detailed case report using the prone transpso...The prone transpsoas approach is a relatively new technique to correct segmental kyphosis and global sagittal imbalance in a minimally invasive fashion. Here, we provide a detailed case report using the prone transpsoas approach to address adjacent segment disease and flatback deformity. This technique allows considerable restoration of segmental lordosis with lateral interbody placement and posterior decompression and fusion using a single position approach. Our experience with the surgical technique and the advantages and challenges unique to this approach are discussed.展开更多
<strong>Objective:</strong> To analyze the relationship between facet joint asymmetry and adjacent intervertebral disc degeneration in lumbar disc herniation. <strong>Methods:</strong> Fifty pa...<strong>Objective:</strong> To analyze the relationship between facet joint asymmetry and adjacent intervertebral disc degeneration in lumbar disc herniation. <strong>Methods:</strong> Fifty patients with L4/5 lumbar disc herniation were enrolled in the study. All patients underwent lumbar MRI examination, to compare the facet asymmetry of lumbar disc herniation and the degeneration of cartilage endplate and intervertebral disc of adjacent segments, and analyze the relationship between them.<strong> Results: </strong>There was no significant correlation between L4/5 facet asymmetry and L5/S1 intervertebral disc degeneration score and cartilage endplate degeneration score (<em>P</em> > 0.05). L4/5 facet asymmetry was significantly correlated with L3/4 disc degeneration score (<em>P </em>< 0.01), but not with cartilage endplate degeneration score (<em>P</em> > 0.05). <strong>Conclusion:</strong> There was a positive correlation between the facet joint angle of lumbar disc herniation and the degeneration of upper proximal segment intervertebral disc. Early correction of lumbar facet angle asymmetry can provide beneficial guidance for further prevention and treatment.展开更多
Anterior Cervical Discectomy and Fusion(ACDF)is the preferred surgical method for the treatment of severe cervical degenerative disc disease with radiculopathy or myelopathy,of which the objectives are to restore the ...Anterior Cervical Discectomy and Fusion(ACDF)is the preferred surgical method for the treatment of severe cervical degenerative disc disease with radiculopathy or myelopathy,of which the objectives are to restore the normal height of intervertebral space and cervical lordosis through the implantation of cervical interbody fusion cage.The biomechanical performance of a cervical interbody fusion cage,which plays a significant role in achieving the goals of ACDF,is influenced by multiple factors.In this paper,various studies focusing on the biomechanical performance of cervical interbody fusion cage are reviewed.Furthermore,the research methods,biomechanical evaluation parameters and data analysis methods of these research are analyzed in order to obtain a comprehensive understanding of the progress and limitations of research in this field.Although great progress has been made to clarify the biomechanical behaviors of cervical interbody fusion cage,there is still controversy regarding the issues such as the relative contribution of multiple factors to the performance of cage,the interactions among these factors,as well as whether the effects of factors change with the process of intervertebral osseointegration and so on.Thus,investigations are still needed to improve the comprehension of cervical interbody fusion cage biomechanically.展开更多
基金The study was approved by our institutional review board,Research Ethics Committee China Medical University and Hospital,Taichung,Taiwan(Protocol No.:CMUH108-REC2-133).
文摘BACKGROUND Radiologic adjacent segment degeneration(ASDeg)can occur after spinal surgery.Adjacent segment disease(ASDis)is defined as the development of new clinical symptoms corresponding to radiographic changes adjacent to the level of previous spinal surgery.Greater pre-existing ASDeg is generally considered to result in more severe ASDis;nonetheless,whether the ASDeg status before index surgery influences the postoperative risk of revision surgery due to ASDis warrants investigation.AIM To identify possible risk factors for ASDis and verify the concept that greater preexisting ASDeg leads to more severe ASDis.METHODS Data from 212 patients who underwent posterior decompression with Dynesys stabilization from January 2006 to June 2016 were retrospectively analyzed.Patients who underwent surgery for ASDis were categorized as group A(n=13),whereas those who did not were classified as group B(n=199).Survival analysis and Cox proportional hazards models were used to compare the modified Pfirrmann grade,University of California-Los Angeles grade,body mass index,number of Dynesys-instrumented levels,and age.RESULTS The mean time of reoperation was 7.22(1.65–11.84)years in group A,and the mean follow-up period was 6.09(0.10–12.76)years in group B.No significant difference in reoperation risk was observed:Modified Pfirrmann grade 3 vs 4(P=0.53)or 4 vs 5(P=0.46)for the upper adjacent disc,University of California-Los Angeles grade 2 vs 3 for the upper adjacent segment(P=0.66),age of<60 vs>60 years(P=0.9),body mass index<25 vs>25 kg/m2(P=0.3),and sex(P=0.8).CONCLUSION Greater preexisting upper ASDeg was not associated with a higher rate of reoperation for ASDis after Dynesys surgery.Being overweight tended to increase reoperation risk after Dynesys surgery for ASDis.
文摘Study Design: This is a retrospective cohort study using data from the adult spinal deformity (ASD) database of a single institution. Purpose: To investigate the incidence of proximal junctional failure and distal junctional failure (DJF) after ASD surgery with a lower instrumented vertebra (LIV) at L5. Overview of Literature: Spinopelvic fixation from the lower thoracic vertebra to the pelvis is the current gold standard treatment for ASD. However, the LIV at L5 is acceptable in some cases. Methods: Fifty-six patients who underwent corrective surgery for ASD with LIV at L5 were included. The upper instrumented vertebra (UIV) was T7 in one patient, T9 in 14, T10 in three, T11 in four, T12 in eight, L1 in 10, and L2 in 16. Regarding clinical parameters, age, sex, curve types of Scoliosis Research Society-Schwab classification, number of levels fused, follow-up period, hip bone mallow density, revision surgery rate, and radiographic measurements were compared between the T (UIV: T7 - 10) and TL (UIV: T11 - L2) groups. Results: The revision surgery rate was 19.6% overall. In the T and TL groups, it was 27.8%, and 15.8%, respectively (p = 0.305). The rate of DJF in the T group (33.3%) was significantly higher than in the TL group (5.3%). The rate of proximal junctional kyphosis in the T group (55.6%) was higher than in the TL group (28.9%), with no significant difference. The mean global alignment, sagittal vertical axis, and C7 plumb line-central sacral vertical line were not different between both groups. Conclusions: ASD surgery with LIV set at L5 and UIV set at the thoracic vertebrae (T7 - T10) has a risk of adjacent segment disease.
文摘The prone transpsoas approach is a relatively new technique to correct segmental kyphosis and global sagittal imbalance in a minimally invasive fashion. Here, we provide a detailed case report using the prone transpsoas approach to address adjacent segment disease and flatback deformity. This technique allows considerable restoration of segmental lordosis with lateral interbody placement and posterior decompression and fusion using a single position approach. Our experience with the surgical technique and the advantages and challenges unique to this approach are discussed.
文摘<strong>Objective:</strong> To analyze the relationship between facet joint asymmetry and adjacent intervertebral disc degeneration in lumbar disc herniation. <strong>Methods:</strong> Fifty patients with L4/5 lumbar disc herniation were enrolled in the study. All patients underwent lumbar MRI examination, to compare the facet asymmetry of lumbar disc herniation and the degeneration of cartilage endplate and intervertebral disc of adjacent segments, and analyze the relationship between them.<strong> Results: </strong>There was no significant correlation between L4/5 facet asymmetry and L5/S1 intervertebral disc degeneration score and cartilage endplate degeneration score (<em>P</em> > 0.05). L4/5 facet asymmetry was significantly correlated with L3/4 disc degeneration score (<em>P </em>< 0.01), but not with cartilage endplate degeneration score (<em>P</em> > 0.05). <strong>Conclusion:</strong> There was a positive correlation between the facet joint angle of lumbar disc herniation and the degeneration of upper proximal segment intervertebral disc. Early correction of lumbar facet angle asymmetry can provide beneficial guidance for further prevention and treatment.
基金This work was supported by the China National Key Research and Development Plan Project(grant number 2016YFB1101100)National Natural Science Foundation of China(grant number 11822201)the 111 Project(grant number B13003).
文摘Anterior Cervical Discectomy and Fusion(ACDF)is the preferred surgical method for the treatment of severe cervical degenerative disc disease with radiculopathy or myelopathy,of which the objectives are to restore the normal height of intervertebral space and cervical lordosis through the implantation of cervical interbody fusion cage.The biomechanical performance of a cervical interbody fusion cage,which plays a significant role in achieving the goals of ACDF,is influenced by multiple factors.In this paper,various studies focusing on the biomechanical performance of cervical interbody fusion cage are reviewed.Furthermore,the research methods,biomechanical evaluation parameters and data analysis methods of these research are analyzed in order to obtain a comprehensive understanding of the progress and limitations of research in this field.Although great progress has been made to clarify the biomechanical behaviors of cervical interbody fusion cage,there is still controversy regarding the issues such as the relative contribution of multiple factors to the performance of cage,the interactions among these factors,as well as whether the effects of factors change with the process of intervertebral osseointegration and so on.Thus,investigations are still needed to improve the comprehension of cervical interbody fusion cage biomechanically.