A flame retardant composition was prepared by using phosphoguanidine,guanidine sulfamate,disodium octaborate tetrahydrate and dodecyl dimethyl benzyl ammonium chloride.Veneers were immersed in such flame retardant mix...A flame retardant composition was prepared by using phosphoguanidine,guanidine sulfamate,disodium octaborate tetrahydrate and dodecyl dimethyl benzyl ammonium chloride.Veneers were immersed in such flame retardant mixture to prepare plywood.The combustion characteristics and thermal stability of plywood were assessed using a cone calorimeter and TG.Results showed that:(1)High concentration and loading of flame retardant were beneficial for the fire resistance of the plywood.(2)The limiting oxygen index(LOI)and residual mass of plywood processed using the flame retardant was increased by 87.52%and 58.66%compared to those of the untreated plywood,while the average heat release rate(av-HRR),total heat release(THR),effective heat of combustion(EHC),total smoke release(TSR),CO yield(COY),CO_(2) yield(CO_(2)Y)and oxygen consumption were decreased by 44.3%,82.9%,47.0%,86.0%,89.9%,50.1%and 83.1%,respectively.(3)Treated plywood which had a low fire growth index(FGI)displayed a later combustion heat release rate peak and slower flame spread than observed for the untreated material.Combustion of treated plywood displayed a higher fire performance index(FPI),indicating a longer time to ignition.This suggests that burning structures from this material would be subject to a longer time for escape from the structure and would present lower fire risk than similar structures containing treated plywood.(4)TG results demonstrated that the presence of the flame retardant can decrease the pyrolysis temperature for hemicellulose and cellulose,change the decomposition and reaction progress for plywood degradation and promote dehydration carbonization and accelerated charformation.Moreover,the formed char was more stable than that combustion of untreated plywood.(5)The flame retardant contains nitrogen(N),phosphorus(P),boron(B),chlorine(Cl)and guanidine(Gu)compounds.The adhesive also contains N and P compounds.These substances display flame resistance and supplement each other to generate flame retardance than any one used alone.By changing the thermolysis and thermal decomposition processes,the heat release and smoke release from plywood,undergoing combustion was reduced.This controlled generation of combustible substances and promoted dehydration and carbonization to form char.As a result,the flame resistance of plywood was improved significantly.The probability of smoke asphyxia or poisoning death of those trapped in structures containing treated plywood during fire accidents can be decreased dramatically.展开更多
Oxidation and burning behaviors were studied for CaO added AM50 Mg composites which were manufactured by conventional melting and casting processes without SF6 protective gas. CaO added AM50 Mg composites show the sta...Oxidation and burning behaviors were studied for CaO added AM50 Mg composites which were manufactured by conventional melting and casting processes without SF6 protective gas. CaO added AM50 Mg composites show the stable oxidation resistance, while AM50 Mg alloys show the poor oxidation resistance. The effects of CaO addition on the burning resistance under ambient, nitrogen and dry air atmospheres were examined for CaO added AM50 Mg composites. With increasing CaO addition, the burning temperature increases under ambient, nitrogen and dry air atmospheres. The burning temperatures of small test specimen under all conditions greatly increase even by 0.3% CaO (mass fraction) addition into AM50 Mg alloys.展开更多
This paper presents a micromechanics-based Cosserat continuum model for microstructured granular materials.By utilizing this model,the macroscopic constitutive parameters of granular materials with different microstru...This paper presents a micromechanics-based Cosserat continuum model for microstructured granular materials.By utilizing this model,the macroscopic constitutive parameters of granular materials with different microstructures are expressed as sums of microstructural information.The microstructures under consideration can be classified into three categories:a medium-dense microstructure,a dense microstructure consisting of one-sized particles,and a dense microstructure consisting of two-sized particles.Subsequently,the Cosserat elastoplastic model,along with its finite element formulation,is derived using the extended Drucker-Prager yield criteria.To investigate failure behaviors,numerical simulations of granular materials with different microstructures are conducted using the ABAQUS User Element(UEL)interface.It demonstrates the capacity of the proposed model to simulate the phenomena of strain-softening and strain localization.The study investigates the influence of microscopic parameters,including contact stiffness parameters and characteristic length,on the failure behaviors of granularmaterials withmicrostructures.Additionally,the study examines themesh independence of the presented model and establishes its relationship with the characteristic length.A comparison is made between finite element simulations and discrete element simulations for a medium-dense microstructure,revealing a good agreement in results during the elastic stage.Somemacroscopic parameters describing plasticity are shown to be partially related to microscopic factors such as confining pressure and size of the representative volume element.展开更多
The warm and ice-rich frozen soil is characterized by high unfrozen water content, low shear strength and large compressibility, which is unreliable to meet the stability requirements of engineering infrastructures an...The warm and ice-rich frozen soil is characterized by high unfrozen water content, low shear strength and large compressibility, which is unreliable to meet the stability requirements of engineering infrastructures and foundations in permafrost regions. In this study, a novel approach for stabilizing the warm and ice-rich frozen soil with sulphoaluminate cement was proposed based on chemical stabilization. The mechanical behaviors of the stabilized soil, such as strength and stress-strain relationship, were investigated through a series of triaxial compression tests conducted at -1.0℃, and the mechanism of strength variations of the stabilized soil was also explained based on scanning electron microscope test. The investigations indicated that the strength of stabilized soil to resist failure has been improved, and the linear Mohr-Coulomb criteria can accurately reflect the shear strength of stabilized soil under various applied confining pressure. The increase in both curing age and cement mixing ratio were favorable to the growth of cohesion and internal friction angle. More importantly, the strength improvement mechanism of the stabilized soil is attributed to the formation of structural skeleton and the generation of cementitious hydration products within itself. Therefore, the investigations conducted in this study provide valuable references for chemical stabilization of warm and ice-rich frozen ground, thereby providing a basis for in-situ ground improvement for reinforcing warm and ice-rich permafrost foundations by soil-cement column installation.展开更多
School-based universal screening for behavioral/emotional risk is a necessary first step to providing services in an educational setting for students with emotional and behavioral disorders (EBDs). Psychometric proper...School-based universal screening for behavioral/emotional risk is a necessary first step to providing services in an educational setting for students with emotional and behavioral disorders (EBDs). Psychometric properties are critical to making decisions about choosing a screening instrument. The purpose of the present study was to examine the psychometric properties of the student risk screening scale for internalizing and externalizing behaviors (SRSS-IE). Participants included 3145 students and their teachers. Item-level analyses of the current sample supported the retention of all items. The internal consistency of the SRSS items ranged from 0.83 to 0.85. Convergent validity between the SRSS-IE and a well-established screening tool, the strength and difficulties questionnaire (SDQ), was found for the total score (r = 0.70). Additionally, the results of this study demonstrate strong social validity, suggesting the SRSS-IE to be a useful and functional screening tool. We conclude that the SRSS-IE is a valid and reliable instrument for assessing the level of emotional and behavioral difficulties among elementary students.展开更多
High-energy gas fracturing of shale is a novel,high efficacy and eco-friendly mining technique,which is a typical dynamic perturbing behavior.To effectively extract shale gas,it is important to understand the dynamic ...High-energy gas fracturing of shale is a novel,high efficacy and eco-friendly mining technique,which is a typical dynamic perturbing behavior.To effectively extract shale gas,it is important to understand the dynamic mechanical properties of shale.Dynamic experiments on shale subjected to true triaxial compression at different strain rates are first conducted in this research.The dynamic stress-strain curves,peak strain,peak stress and failure modes of shale are investigated.The results of the study indicate that the intermediate principal stress and the minor principal stress have the significant influence on the dynamic mechanical behaviors,although this effect decreases as the strain rate increases.The characteristics of compression-shear failure primarily occur in shale subjected to triaxial compression at high strain rates,which distinguishes it from the fragmentation characteristics observed in shale under dynamic uniaxial compression.Additionally,a numerical three-dimensional Split Hopkinson Pressure Bar(3D-SHPB),which is established by coupling PFC3D and FLAC3D methods,is validated to replicate the laboratory characteristics of shale.The dynamic mechanical characteristics of shale subjected to different confining stresses are systematically investigated by the coupling PFC3D and FLAC3D method.The numerical results are in good agreement with the experimental data.展开更多
Gradiently denitrated gun propellant(GDGP)prepared by a“gradient denitration”strategy is obviously superior in progressive burning performance to the traditional deterred gun propellant.Currently,the preparation of ...Gradiently denitrated gun propellant(GDGP)prepared by a“gradient denitration”strategy is obviously superior in progressive burning performance to the traditional deterred gun propellant.Currently,the preparation of GDGP employed a tedious two-step method involving organic solvents,which hinders the large-scale preparation of GDGP.In this paper,GDGP was successfully prepared via a novelty and environmentally friendly one-step method.The obtained samples were characterized by FT-IR,Raman,SEM and XPS.The results showed that the content of nitrate groups gradiently increased from the surface to the core in the surface layer of GDGP and the surface layer of GDGP exhibited a higher compaction than that of raw gun propellant,with a well-preserved nitrocellulose structure.The denitration process enabled the propellant surface with regressive energy density and good progressive burning performance,as confirmed by oxygen bomb and closed bomb test.At the same time,the effects of different solvents on the component loss of propellant were compared.The result showed that water caused the least component loss.Finally,the stability of GDGP was confirmed by methyl-violet test.This work not only provided environmentally friendly,simple and economic preparation of GDGP,but also confirmed the stability of GDGP prepared by this method.展开更多
Material removal in the cutting process is regarded as a friction system with multiple input and output variables.The complexity of the cutting friction system is caused by the extreme conditions existing on the tool...Material removal in the cutting process is regarded as a friction system with multiple input and output variables.The complexity of the cutting friction system is caused by the extreme conditions existing on the tool–chip and tool–workpiece interfaces.The critical issue is significant to use knowledge of cutting friction behaviors to guide researchers and industrial manufacturing engineers in designing rational cutting processes to reduce tool wear and improve surface quality.This review focuses on the state of the art of research on friction behaviors in cutting procedures as well as future perspectives.First,the cutting friction phenomena under extreme conditions,such as high temperature,large strain/strain rates,sticking–sliding contact states,and diverse cutting conditions are analyzed.Second,the theoretical models of cutting friction behaviors and the application of simulation technology are discussed.Third,the factors that affect friction behaviors are analyzed,including material matching,cutting parameters,lubrication/cooling conditions,micro/nano surface textures,and tool coatings.Then,the consequences of the cutting friction phenomena,including tool wear patterns,tool life,chip formation,and the machined surface are analyzed.Finally,the research limitations and future work for cutting friction behaviors are discussed.This review contributes to the understanding of cutting friction behaviors and the development of high-quality cutting technology.展开更多
Pyrolytic graphite (PG) with highly aligned graphene layers,present anisotropic electrical and thermal transport behavior,which is attractive in electronic,electrocatalyst and energy storage.Such pristine PG could mee...Pyrolytic graphite (PG) with highly aligned graphene layers,present anisotropic electrical and thermal transport behavior,which is attractive in electronic,electrocatalyst and energy storage.Such pristine PG could meeting the limit of electrical conductivity (~2.5×10^(4) S·cm^(−1)),although efforts have been made for achieving high-purity sp^(2) hybridized carbon.For manipulating the electrical conductivity of PG,a facile and efficient electrochemical strategy is demonstrated to enhance electrical transport ability via reversible intercalation/de-intercalation of AlCl_(4)^(-)into the graphitic interlayers.With the stage evolution at different voltages,variable electrical and thermal transport behaviors could be achieved via controlling AlCl_(4)^(-)concentrations in the PG because of substantial variation in the electronic density of states.Such evolution leads to decoupled electrical and thermal transport (opposite variation trend) in the in-plane and out-of-plane directions,and the in-plane electrical conductivity of the pristine PG (1.25×10^(4) S·cm^(−1)) could be massively promoted to 4.09×10^(4) S·cm(AlCl_(4)^(-)intercalated PG),much better than the pristine bulk graphitic papers used for the electrical transport and electromagnetic shielding.The fundamental mechanism of decoupled transport feature and electrochemical strategy here could be extended into other anisotropic conductive bulks for achieving unusual behaviors.展开更多
The formation mechanism of calcium vanadate and manganese vanadate and the difference between calcium and manganese in the reaction with vanadium are basic issues in the calcification roasting and manganese roasting p...The formation mechanism of calcium vanadate and manganese vanadate and the difference between calcium and manganese in the reaction with vanadium are basic issues in the calcification roasting and manganese roasting process with vanadium slag.In this work,CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples were prepared and roasted for different time periods to illustrate and compare the diffusion reaction mechanisms.Then,the changes in the diffusion product and diffusion coefficient were investigated and calculated based on scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) analysis.Results show that with the extension of the roasting time,the diffusion reaction gradually proceeds among the CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples.The regional boundaries of calcium and vanadium are easily identifiable for the CaO–V_(2)O_(5) diffusion couple.Meanwhile,for the MnO_(2)–V_(2)O_(5) diffusion couple,MnO_(2) gradually decomposes to form Mn_(2)O_(3),and vanadium diffuses into the interior of Mn_(2)O_(3).Only a part of vanadium combines with manganese to form the diffusion production layer.CaV_(2)O_(6) and MnV_(2)O_(6) are the interfacial reaction products of the CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples,respectively,whose thicknesses are 39.85 and 32.13μm when roasted for 16 h.After 16 h,both diffusion couples reach the reaction equilibrium due to the limitation of diffusion.The diffusion coefficient of the CaO–V_(2)O_(5) diffusion couple is higher than that of the MnO_(2)–V_(2)O_(5) diffusion couple for the same roasting time,and the diffusion reaction between vanadium and calcium is easier than that between vanadium and manganese.展开更多
As an innovative propulsion technique, laser augmented chemical propulsion(LACP) seems superior to the traditional ones. However, the corresponding combustion theories have still to be ascertained for LACP. Burning ra...As an innovative propulsion technique, laser augmented chemical propulsion(LACP) seems superior to the traditional ones. However, the corresponding combustion theories have still to be ascertained for LACP. Burning rate of 5-aminotetrazole(5-ATZ) propellant has been studied by testing pressed samples under different combustor pressures and laser powers. Based on micro computed tomography(Micro CT),an advanced thickness-over-time(TOT) method to characterize the regression of the produced nonplanar burning surface is established. Because of a shell structure covering the combustion surface,the burning rate of the implemented 5-ATZ propellant is not constant during laser ablation. Resorting to functional fitting, a new law of non-constant burning including the effect of the observed unique burning surface structures is proposed. Accordingly, applicable combustion conditions of 5-ATZ based propellants have been preliminarily speculated for future research activities.展开更多
Emergency decision-making problems usually involve many experts with different professional backgrounds and concerns,leading to non-cooperative behaviors during the consensus-reaching process.Many studies on noncooper...Emergency decision-making problems usually involve many experts with different professional backgrounds and concerns,leading to non-cooperative behaviors during the consensus-reaching process.Many studies on noncooperative behavior management assumed that the maximumdegree of cooperation of experts is to totally accept the revisions suggested by the moderator,which restricted individuals with altruistic behaviors to make more contributions in the agreement-reaching process.In addition,when grouping a large group into subgroups by clustering methods,existing studies were based on the similarity of evaluation values or trust relationships among experts separately but did not consider them simultaneously.In this study,we introduce a clustering method considering the similarity of evaluation values and the trust relations of experts and then develop a consensusmodel taking into account the altruistic behaviors of experts.First,we cluster experts into subgroups by a constrained Kmeans clustering algorithm according to the opinion similarity and trust relationship of experts.Then,we calculate the weights of experts and clusters based on the centrality degrees of experts.Next,to enhance the quality of consensus reaching,we identify three kinds of non-cooperative behaviors and propose corresponding feedback mechanisms relying on the altruistic behaviors of experts.A numerical example is given to show the effectiveness and practicality of the proposed method in emergency decision-making.The study finds that integrating altruistic behavior analysis in group decision-making can safeguard the interests of experts and ensure the integrity of decision-making information.展开更多
We aimed to investigate if college students’ dietary and physical activity adhered to the Chinese Dietary Guidelines, the Composing Editorial Board of Physical Activity Guidelines, and WHO recommendation for NCDs pre...We aimed to investigate if college students’ dietary and physical activity adhered to the Chinese Dietary Guidelines, the Composing Editorial Board of Physical Activity Guidelines, and WHO recommendation for NCDs prevention. Methods: A 3-day (2 weekdays and 1 weekend day) 24-hour (24-HRs) dietary recall was conducted to record details of participants’ food consumption. One-way analysis of variance (ANOVA) was applied to examine the influence of the identified demographic variables (including BMI, gender, major, family monthly income, and place of household registration) on the 8 food groups’ consumption. We analyzed the effect of the various demographic variables on sodium intake by the student’s t-test. The questionnaire, International Physical Activity Questionnaire (IPAQ)-Short Form, was utilized to assess participants’ physical activity (PA) level. The Wilcoxon-Mann-Whitney was applied to analyze participants’ physical activity. Results: Our research indicated participants consumed much fewer fruits and vegetables and excessive meats on average for both males and females regarding NCDs prevention. Conclusion: Participants’ dietary intake did not comply with the Chinese Dietary Guide-lines recommendation for chronic diseases prevention. Nutrition knowledge and health education are needed for college students. .展开更多
Prescribed burning can alter soil microbial activity and spatially redistribute soil nutrient elements.However,no systematic,in-depth studies have investigated the impact of prescribed burning on the spatial patterns ...Prescribed burning can alter soil microbial activity and spatially redistribute soil nutrient elements.However,no systematic,in-depth studies have investigated the impact of prescribed burning on the spatial patterns of soil microbial biomass in temperate forest ecosystems in Northeast China.The present study investigated the impacts of prescribed burning on the small-scale spatial heterogeneity of microbial biomass carbon(MBC)and microbial biomass nitrogen(MBN)in the upper(0–10 cm)and lower(10–20 cm)soil layers in Pinus koraiensis and Quercus mongolica forests and explored the factors that infl uence spatial variations of these variables after prescribed burning.Our results showed that,MBC declined by approximately 30%in the 10–20 cm soil layer in the Q.mongolica forest,where there were no signifi cant eff ects on the soil MBC and MBN contents of the P.koraiensis forest(p>0.05)after prescribed burning.Compared to the MBC of the Q.mongolica forest before the prescribed burn,MBC spatial dependence in the upper and lower soil layers was approximately 7%and 2%higher,respectively.After the prescribed burn,MBN spatial dependence in the upper and lower soil layers in the P.koraiensis forest was approximately 1%and 13%lower,respectively,than that before the burn,and the MBC spatial variability in the 0–10 cm soil layer in the two forest types was explained by the soil moisture content(SMC),whereas the MBN spatial variability in the 0–10 cm soil layer in the two forests was explained by the soil pH and nitrate nitrogen(NO_(3)^(–)-N),respectively.In the lower soil layer(10–20 cm)of the Q.mongolica forest,elevation and ammonium nitrogen(NH 4+-N)were the main factors aff ecting the spatial variability of MBC and MBN,respectively.In the 10–20 cm soil layer of the P.koraiensis forest,NO_(3)^(–)-N and slope were the main factors aff ecting the spatial variability of MBC and MBN,respectively,after the burn.The spatial distributions of MBC and MBN in the two forests were largely structured with higher spatial autocorrelation(relative structural variance C/[C 0+C]>0.75).However,the factors infl uencing the spatial variability of MBC and MBN in the two forest types were not consistent between the upper and lower soil layers with prescribed burning.These fi ndings have important implications for developing sustainable management and conservation policies for forest ecosystems.展开更多
The laminar combustion characteristics of CH_(4)/air premixed flames with CO_(2) addition are systemically studied.Experimental measurements and numerical simulations of the laminar burning velocity(LBV)are performed ...The laminar combustion characteristics of CH_(4)/air premixed flames with CO_(2) addition are systemically studied.Experimental measurements and numerical simulations of the laminar burning velocity(LBV)are performed in CH_(4)/CO_(2)/Air flames with various CO_(2) doping ratio under equivalence ratios of 1.0–1.4.GRI 3.0 mech and Aramco mech are employed for predicting LBV,adiabatic flame temperature(AFT),important intermediate radicals(CH_(3),H,OH,O)and NO_(x) emissions(NO,NO_(2),N2O),as well as the sensitivity analysis is also conducted.The detail analysis of experiment and simulation reveals that as the CO_(2) addition increases from 0%to 40%,the LBVs and AFTs decrease monotonously.Under the same CO_(2) doping ratio,the LBVs and AFTs increase first and then decrease with the increase of equivalence ratio,and the maximum of LBV is reached at equivalence ratio of 1.05.The mole fraction tendency of important intermediates and NO_(x) with equivalence ratio and CO_(2) doping ratio are similar to the LBVs and AFTs.Reaction H+O_(2)⇔O+OH is found to be responsible for the promotion of the generation of important intermediates and NO_(x) under the equivalence ratios and CO_(2) addition through sensitivity analysis.The sensitivity coefficients of elementary reactions that the increasing of CO_(2) doping ratio promotes or inhibits formation of intermediate radicals and NO_(x) decreases.展开更多
The pointwise space-time behaviors of the Green’s function and the global solution to the Vlasov-Poisson-Fokker-Planck(VPFP)system in three dimensional space are studied in this paper.It is shown that the Green’s fu...The pointwise space-time behaviors of the Green’s function and the global solution to the Vlasov-Poisson-Fokker-Planck(VPFP)system in three dimensional space are studied in this paper.It is shown that the Green’s function consists of the diffusion waves decaying exponentially in time but algebraically in space,and the singular kinetic waves which become smooth for all(t,x,v)when t>0.Furthermore,we establish the pointwise space-time behaviors of the global solution to the nonlinear VPFP system when the initial data is not necessarily smooth in terms of the Green’s function.展开更多
To better understand the benzene alkylation with chloroaluminate ionic liquids(ILs) as catalyst, the interfacial properties between the benzene/butene binary reactants and chloroaluminate ILs with varying cation alkyl...To better understand the benzene alkylation with chloroaluminate ionic liquids(ILs) as catalyst, the interfacial properties between the benzene/butene binary reactants and chloroaluminate ILs with varying cation alkyl chain length and different anions were investigated using molecular dynamics(MD) simulations. The results indicate that ILs can obviously improve the interfacial width, solubility and diffusion of reactants compared to H_(2)SO_(4). The longer alkyl chains of cations present a density enrichment at the interface and protrude into the binary reactants phase. Furthermore, the ILs consisting of 1-octyl-3-methylimidazolium cations([Omim]^(+)) and the stronger acidity heptachlorodialuminate anions([Al_(2)Cl_(7)]^(-)) are more beneficial to promote the interfacial width and facilitate the dissolution and diffusion of benzene in both the IL bulk and the interfacial region in comparison to the ones with shorter alkyl chains cations and weaker acidity anions. The information gives us a better guideline for the design of ILs for benzene alkylation.展开更多
Biomedical degradable materials would be subjected to different degrees and forms of static stress after being implanted in the human body.In this work,the biocorrosion behaviors of AZ31B magnesium alloy under differe...Biomedical degradable materials would be subjected to different degrees and forms of static stress after being implanted in the human body.In this work,the biocorrosion behaviors of AZ31B magnesium alloy under different stress forms with different magnitudes(20~150MPa)were studied.It was found that the corrosion behaviors at stressed conditions were severer than those at unstressed conditions and corrosion rates were obviously accelerated.The biocorrosion behaviors are more sensitive to the effects of tensile loads than to compressive loads.A biocorrosion numerical model on the degradation process of Mg alloy under static loads was established.The corrosion current density(i_(corr))of Mg alloy and the applied static stress(σ)matches a linear relationship of ln i_(corr)~σwell during the early stage(within 24 hrs)while deviated gradually in the latter period of corrosion.This work could provide a guidance and theoretical reference for further researches on the biocorrosion behaviors and practical clinical applications of the biomedical materials subjected to physiological loads.展开更多
The present study aims at the numerical simulations of the melting process of cerium oxide particles in RF thermal plasma.The physical model and the calculating method were described firstly;the interaction between ce...The present study aims at the numerical simulations of the melting process of cerium oxide particles in RF thermal plasma.The physical model and the calculating method were described firstly;the interaction between cerium oxide particles and plasma was analyzed;specific attention was given to the effects of particle initial size,injection velocity on the particle melting and trajectory in plasma.The influence of the temperature field and velocity field distribution of the plasma around the particle trajectory on the melting effect is analyzed,and the relationship between the heat absorption efficiency of the particles and the particle size reduction process is further determined.It is also found that there exists an optimal particle initial injection velocity which led to a more concentrated final particle size distribution and a more significant reduction of particle size.The results could provide effective guidance for understanding the plasma spheroidization process of uranium dioxide and cerium dioxide powder particles.展开更多
This study aimed to examine the associations between lifestyle behaviors and depressive symptoms in adolescents.Self-reported data from the 2019 Youth Risk Behavior Survey(YRBS)was analyzed.Depressive symptoms were se...This study aimed to examine the associations between lifestyle behaviors and depressive symptoms in adolescents.Self-reported data from the 2019 Youth Risk Behavior Survey(YRBS)was analyzed.Depressive symptoms were set as the outcome variable.Movement variables(physical activity,muscle-strengthening exercise,physical education attendance,sports team participation,television watching,video or computer games,and sleep),eating behaviors(fruit intake,vegetable intake,milk intake,and eating breakfast or not),and substance use(alcohol use and cigarette use)were included as explanatory variables.Binary logistic regression was used to explore the asso-ciations between lifestyle behaviors and depressive symptoms after adjusting for sex,age,grade,race,and weight status.Of 13,677 participants who completed the investigation,girls were more than boys(50.3%vs.48.6%).The proportion of participants in grades 9,10,11,and 12 was 26.6,27.2,24.3,and 20.8,respectively.Of them,the prevalence of depressive symptoms was 36.0%(weighted%:36.7%[35.1%,38.3%]).Among all the lifestyle behaviors included,participating in no sports teams(OR=1.53[1.32,1.77]),spending more than 2 h in video or computer games(OR=1.64[1.40,1.92]),sleeping less than 8 h nightly(OR=1.79[1.45,2.20]),not eating breakfast(OR=1.56[1.37,1.78]),alcohol use(OR=1.74[1.49,2.02]),and cigarette use(OR=1.83[1.42,2.37])were associated with higher odds of depressive symptoms.To reduce depressive symptoms in adolescents,interventions can consider encouraging adolescents to engage in team sports activity,limit time for video or com-puter games,sleep enough,regularly eat breakfast,and avoid using alcohol and cigarette.Future studies are encouraged to verify our researchfindings by using a more improved study design.展开更多
基金This work was supported by Science-technology Support Foundation of Guizhou Province of China(Nos.[2019]2308,[2020]1Y125,NY[2015]3027,and ZK[2021]162)National Natural Science Foundation of China(No.31800481)+1 种基金Forestry Department Foundation of Guizhou Province of China(No.[2018]13)Cultivation Project of Guizhou University of China(No.[2019]37).
文摘A flame retardant composition was prepared by using phosphoguanidine,guanidine sulfamate,disodium octaborate tetrahydrate and dodecyl dimethyl benzyl ammonium chloride.Veneers were immersed in such flame retardant mixture to prepare plywood.The combustion characteristics and thermal stability of plywood were assessed using a cone calorimeter and TG.Results showed that:(1)High concentration and loading of flame retardant were beneficial for the fire resistance of the plywood.(2)The limiting oxygen index(LOI)and residual mass of plywood processed using the flame retardant was increased by 87.52%and 58.66%compared to those of the untreated plywood,while the average heat release rate(av-HRR),total heat release(THR),effective heat of combustion(EHC),total smoke release(TSR),CO yield(COY),CO_(2) yield(CO_(2)Y)and oxygen consumption were decreased by 44.3%,82.9%,47.0%,86.0%,89.9%,50.1%and 83.1%,respectively.(3)Treated plywood which had a low fire growth index(FGI)displayed a later combustion heat release rate peak and slower flame spread than observed for the untreated material.Combustion of treated plywood displayed a higher fire performance index(FPI),indicating a longer time to ignition.This suggests that burning structures from this material would be subject to a longer time for escape from the structure and would present lower fire risk than similar structures containing treated plywood.(4)TG results demonstrated that the presence of the flame retardant can decrease the pyrolysis temperature for hemicellulose and cellulose,change the decomposition and reaction progress for plywood degradation and promote dehydration carbonization and accelerated charformation.Moreover,the formed char was more stable than that combustion of untreated plywood.(5)The flame retardant contains nitrogen(N),phosphorus(P),boron(B),chlorine(Cl)and guanidine(Gu)compounds.The adhesive also contains N and P compounds.These substances display flame resistance and supplement each other to generate flame retardance than any one used alone.By changing the thermolysis and thermal decomposition processes,the heat release and smoke release from plywood,undergoing combustion was reduced.This controlled generation of combustible substances and promoted dehydration and carbonization to form char.As a result,the flame resistance of plywood was improved significantly.The probability of smoke asphyxia or poisoning death of those trapped in structures containing treated plywood during fire accidents can be decreased dramatically.
文摘Oxidation and burning behaviors were studied for CaO added AM50 Mg composites which were manufactured by conventional melting and casting processes without SF6 protective gas. CaO added AM50 Mg composites show the stable oxidation resistance, while AM50 Mg alloys show the poor oxidation resistance. The effects of CaO addition on the burning resistance under ambient, nitrogen and dry air atmospheres were examined for CaO added AM50 Mg composites. With increasing CaO addition, the burning temperature increases under ambient, nitrogen and dry air atmospheres. The burning temperatures of small test specimen under all conditions greatly increase even by 0.3% CaO (mass fraction) addition into AM50 Mg alloys.
基金the National Natural Science Foundation of China through Contract/Grant Numbers 12002245,12172263 and 11772237Chongqing Jiaotong University through Contract/Grant Number F1220038.
文摘This paper presents a micromechanics-based Cosserat continuum model for microstructured granular materials.By utilizing this model,the macroscopic constitutive parameters of granular materials with different microstructures are expressed as sums of microstructural information.The microstructures under consideration can be classified into three categories:a medium-dense microstructure,a dense microstructure consisting of one-sized particles,and a dense microstructure consisting of two-sized particles.Subsequently,the Cosserat elastoplastic model,along with its finite element formulation,is derived using the extended Drucker-Prager yield criteria.To investigate failure behaviors,numerical simulations of granular materials with different microstructures are conducted using the ABAQUS User Element(UEL)interface.It demonstrates the capacity of the proposed model to simulate the phenomena of strain-softening and strain localization.The study investigates the influence of microscopic parameters,including contact stiffness parameters and characteristic length,on the failure behaviors of granularmaterials withmicrostructures.Additionally,the study examines themesh independence of the presented model and establishes its relationship with the characteristic length.A comparison is made between finite element simulations and discrete element simulations for a medium-dense microstructure,revealing a good agreement in results during the elastic stage.Somemacroscopic parameters describing plasticity are shown to be partially related to microscopic factors such as confining pressure and size of the representative volume element.
基金supported by the National Natural Science Foundation of China (No. 41471062, No. 41971085, No. 41971086)。
文摘The warm and ice-rich frozen soil is characterized by high unfrozen water content, low shear strength and large compressibility, which is unreliable to meet the stability requirements of engineering infrastructures and foundations in permafrost regions. In this study, a novel approach for stabilizing the warm and ice-rich frozen soil with sulphoaluminate cement was proposed based on chemical stabilization. The mechanical behaviors of the stabilized soil, such as strength and stress-strain relationship, were investigated through a series of triaxial compression tests conducted at -1.0℃, and the mechanism of strength variations of the stabilized soil was also explained based on scanning electron microscope test. The investigations indicated that the strength of stabilized soil to resist failure has been improved, and the linear Mohr-Coulomb criteria can accurately reflect the shear strength of stabilized soil under various applied confining pressure. The increase in both curing age and cement mixing ratio were favorable to the growth of cohesion and internal friction angle. More importantly, the strength improvement mechanism of the stabilized soil is attributed to the formation of structural skeleton and the generation of cementitious hydration products within itself. Therefore, the investigations conducted in this study provide valuable references for chemical stabilization of warm and ice-rich frozen ground, thereby providing a basis for in-situ ground improvement for reinforcing warm and ice-rich permafrost foundations by soil-cement column installation.
文摘School-based universal screening for behavioral/emotional risk is a necessary first step to providing services in an educational setting for students with emotional and behavioral disorders (EBDs). Psychometric properties are critical to making decisions about choosing a screening instrument. The purpose of the present study was to examine the psychometric properties of the student risk screening scale for internalizing and externalizing behaviors (SRSS-IE). Participants included 3145 students and their teachers. Item-level analyses of the current sample supported the retention of all items. The internal consistency of the SRSS items ranged from 0.83 to 0.85. Convergent validity between the SRSS-IE and a well-established screening tool, the strength and difficulties questionnaire (SDQ), was found for the total score (r = 0.70). Additionally, the results of this study demonstrate strong social validity, suggesting the SRSS-IE to be a useful and functional screening tool. We conclude that the SRSS-IE is a valid and reliable instrument for assessing the level of emotional and behavioral difficulties among elementary students.
基金supported by the National Natural Science Foundation of China(Nos.51839009 and 52027814)the Natural Science Foundation of Hubei Province(No.2023AFB589).
文摘High-energy gas fracturing of shale is a novel,high efficacy and eco-friendly mining technique,which is a typical dynamic perturbing behavior.To effectively extract shale gas,it is important to understand the dynamic mechanical properties of shale.Dynamic experiments on shale subjected to true triaxial compression at different strain rates are first conducted in this research.The dynamic stress-strain curves,peak strain,peak stress and failure modes of shale are investigated.The results of the study indicate that the intermediate principal stress and the minor principal stress have the significant influence on the dynamic mechanical behaviors,although this effect decreases as the strain rate increases.The characteristics of compression-shear failure primarily occur in shale subjected to triaxial compression at high strain rates,which distinguishes it from the fragmentation characteristics observed in shale under dynamic uniaxial compression.Additionally,a numerical three-dimensional Split Hopkinson Pressure Bar(3D-SHPB),which is established by coupling PFC3D and FLAC3D methods,is validated to replicate the laboratory characteristics of shale.The dynamic mechanical characteristics of shale subjected to different confining stresses are systematically investigated by the coupling PFC3D and FLAC3D method.The numerical results are in good agreement with the experimental data.
文摘Gradiently denitrated gun propellant(GDGP)prepared by a“gradient denitration”strategy is obviously superior in progressive burning performance to the traditional deterred gun propellant.Currently,the preparation of GDGP employed a tedious two-step method involving organic solvents,which hinders the large-scale preparation of GDGP.In this paper,GDGP was successfully prepared via a novelty and environmentally friendly one-step method.The obtained samples were characterized by FT-IR,Raman,SEM and XPS.The results showed that the content of nitrate groups gradiently increased from the surface to the core in the surface layer of GDGP and the surface layer of GDGP exhibited a higher compaction than that of raw gun propellant,with a well-preserved nitrocellulose structure.The denitration process enabled the propellant surface with regressive energy density and good progressive burning performance,as confirmed by oxygen bomb and closed bomb test.At the same time,the effects of different solvents on the component loss of propellant were compared.The result showed that water caused the least component loss.Finally,the stability of GDGP was confirmed by methyl-violet test.This work not only provided environmentally friendly,simple and economic preparation of GDGP,but also confirmed the stability of GDGP prepared by this method.
基金financial support from the National Key Research and Development Program of China (2019YFB2005401)National Natural Science Foundation of China (Nos. 91860207 and 52175420)+5 种基金Shandong Provincial Key Research and Development Program (Major Scientific and Technological Innovation Project)(No. 2020CXGC010204)Shandong Provincial Natural Science Foundation of China (2021JMRH0301 and2021JMRH0304)Taishan Scholar FoundationInternational Partnership Scheme of the Bureau of the International Scientific Cooperation of the Chinese Academy of Sciences(No. 181722KYSB20180015)Research and Innovation Office of The Hong Kong Polytechnic University (BBX5and BBX7)funding support to the State Key Laboratories in Hong Kong
文摘Material removal in the cutting process is regarded as a friction system with multiple input and output variables.The complexity of the cutting friction system is caused by the extreme conditions existing on the tool–chip and tool–workpiece interfaces.The critical issue is significant to use knowledge of cutting friction behaviors to guide researchers and industrial manufacturing engineers in designing rational cutting processes to reduce tool wear and improve surface quality.This review focuses on the state of the art of research on friction behaviors in cutting procedures as well as future perspectives.First,the cutting friction phenomena under extreme conditions,such as high temperature,large strain/strain rates,sticking–sliding contact states,and diverse cutting conditions are analyzed.Second,the theoretical models of cutting friction behaviors and the application of simulation technology are discussed.Third,the factors that affect friction behaviors are analyzed,including material matching,cutting parameters,lubrication/cooling conditions,micro/nano surface textures,and tool coatings.Then,the consequences of the cutting friction phenomena,including tool wear patterns,tool life,chip formation,and the machined surface are analyzed.Finally,the research limitations and future work for cutting friction behaviors are discussed.This review contributes to the understanding of cutting friction behaviors and the development of high-quality cutting technology.
基金financially supported by the National Key R&D Program of China (No. 2018YFB0104400)the National Natural Science Foundation of China (Nos. 52074036, 51725401, and 51874019)Beijing Municipal Science and Technology Commission (No. Z191100002719007)
文摘Pyrolytic graphite (PG) with highly aligned graphene layers,present anisotropic electrical and thermal transport behavior,which is attractive in electronic,electrocatalyst and energy storage.Such pristine PG could meeting the limit of electrical conductivity (~2.5×10^(4) S·cm^(−1)),although efforts have been made for achieving high-purity sp^(2) hybridized carbon.For manipulating the electrical conductivity of PG,a facile and efficient electrochemical strategy is demonstrated to enhance electrical transport ability via reversible intercalation/de-intercalation of AlCl_(4)^(-)into the graphitic interlayers.With the stage evolution at different voltages,variable electrical and thermal transport behaviors could be achieved via controlling AlCl_(4)^(-)concentrations in the PG because of substantial variation in the electronic density of states.Such evolution leads to decoupled electrical and thermal transport (opposite variation trend) in the in-plane and out-of-plane directions,and the in-plane electrical conductivity of the pristine PG (1.25×10^(4) S·cm^(−1)) could be massively promoted to 4.09×10^(4) S·cm(AlCl_(4)^(-)intercalated PG),much better than the pristine bulk graphitic papers used for the electrical transport and electromagnetic shielding.The fundamental mechanism of decoupled transport feature and electrochemical strategy here could be extended into other anisotropic conductive bulks for achieving unusual behaviors.
基金supported by the National Natural Science Foundation of China(Nos.52174277 and 51874077)the Fundamental Funds for the Central Universities,China(No.N2225032)+1 种基金the China Postdoctoral Science Foundation(No.2022M720683)the Postdoctoral Fund of Northeastern University,China。
文摘The formation mechanism of calcium vanadate and manganese vanadate and the difference between calcium and manganese in the reaction with vanadium are basic issues in the calcification roasting and manganese roasting process with vanadium slag.In this work,CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples were prepared and roasted for different time periods to illustrate and compare the diffusion reaction mechanisms.Then,the changes in the diffusion product and diffusion coefficient were investigated and calculated based on scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) analysis.Results show that with the extension of the roasting time,the diffusion reaction gradually proceeds among the CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples.The regional boundaries of calcium and vanadium are easily identifiable for the CaO–V_(2)O_(5) diffusion couple.Meanwhile,for the MnO_(2)–V_(2)O_(5) diffusion couple,MnO_(2) gradually decomposes to form Mn_(2)O_(3),and vanadium diffuses into the interior of Mn_(2)O_(3).Only a part of vanadium combines with manganese to form the diffusion production layer.CaV_(2)O_(6) and MnV_(2)O_(6) are the interfacial reaction products of the CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples,respectively,whose thicknesses are 39.85 and 32.13μm when roasted for 16 h.After 16 h,both diffusion couples reach the reaction equilibrium due to the limitation of diffusion.The diffusion coefficient of the CaO–V_(2)O_(5) diffusion couple is higher than that of the MnO_(2)–V_(2)O_(5) diffusion couple for the same roasting time,and the diffusion reaction between vanadium and calcium is easier than that between vanadium and manganese.
基金supported by the Shanghai Aerospace Science & Technology Innovation Fund (grant No. SAST201363)the Fundamental Research Funds for the Central Universities (grant No. 30919012102 in part)。
文摘As an innovative propulsion technique, laser augmented chemical propulsion(LACP) seems superior to the traditional ones. However, the corresponding combustion theories have still to be ascertained for LACP. Burning rate of 5-aminotetrazole(5-ATZ) propellant has been studied by testing pressed samples under different combustor pressures and laser powers. Based on micro computed tomography(Micro CT),an advanced thickness-over-time(TOT) method to characterize the regression of the produced nonplanar burning surface is established. Because of a shell structure covering the combustion surface,the burning rate of the implemented 5-ATZ propellant is not constant during laser ablation. Resorting to functional fitting, a new law of non-constant burning including the effect of the observed unique burning surface structures is proposed. Accordingly, applicable combustion conditions of 5-ATZ based propellants have been preliminarily speculated for future research activities.
基金supported by the National Natural Science Foundation of China (Nos.71771156,71971145,72171158).
文摘Emergency decision-making problems usually involve many experts with different professional backgrounds and concerns,leading to non-cooperative behaviors during the consensus-reaching process.Many studies on noncooperative behavior management assumed that the maximumdegree of cooperation of experts is to totally accept the revisions suggested by the moderator,which restricted individuals with altruistic behaviors to make more contributions in the agreement-reaching process.In addition,when grouping a large group into subgroups by clustering methods,existing studies were based on the similarity of evaluation values or trust relationships among experts separately but did not consider them simultaneously.In this study,we introduce a clustering method considering the similarity of evaluation values and the trust relations of experts and then develop a consensusmodel taking into account the altruistic behaviors of experts.First,we cluster experts into subgroups by a constrained Kmeans clustering algorithm according to the opinion similarity and trust relationship of experts.Then,we calculate the weights of experts and clusters based on the centrality degrees of experts.Next,to enhance the quality of consensus reaching,we identify three kinds of non-cooperative behaviors and propose corresponding feedback mechanisms relying on the altruistic behaviors of experts.A numerical example is given to show the effectiveness and practicality of the proposed method in emergency decision-making.The study finds that integrating altruistic behavior analysis in group decision-making can safeguard the interests of experts and ensure the integrity of decision-making information.
文摘We aimed to investigate if college students’ dietary and physical activity adhered to the Chinese Dietary Guidelines, the Composing Editorial Board of Physical Activity Guidelines, and WHO recommendation for NCDs prevention. Methods: A 3-day (2 weekdays and 1 weekend day) 24-hour (24-HRs) dietary recall was conducted to record details of participants’ food consumption. One-way analysis of variance (ANOVA) was applied to examine the influence of the identified demographic variables (including BMI, gender, major, family monthly income, and place of household registration) on the 8 food groups’ consumption. We analyzed the effect of the various demographic variables on sodium intake by the student’s t-test. The questionnaire, International Physical Activity Questionnaire (IPAQ)-Short Form, was utilized to assess participants’ physical activity (PA) level. The Wilcoxon-Mann-Whitney was applied to analyze participants’ physical activity. Results: Our research indicated participants consumed much fewer fruits and vegetables and excessive meats on average for both males and females regarding NCDs prevention. Conclusion: Participants’ dietary intake did not comply with the Chinese Dietary Guide-lines recommendation for chronic diseases prevention. Nutrition knowledge and health education are needed for college students. .
基金supported by the National Natural Science Foundation of China(Grant No.32001324,32071777)Youth Lift Project of China Association for Science and Technology(Grant No.YESS20210370)Heilongjiang Province Outstanding Youth Joint Guidance Project(No.LH2021C012).
文摘Prescribed burning can alter soil microbial activity and spatially redistribute soil nutrient elements.However,no systematic,in-depth studies have investigated the impact of prescribed burning on the spatial patterns of soil microbial biomass in temperate forest ecosystems in Northeast China.The present study investigated the impacts of prescribed burning on the small-scale spatial heterogeneity of microbial biomass carbon(MBC)and microbial biomass nitrogen(MBN)in the upper(0–10 cm)and lower(10–20 cm)soil layers in Pinus koraiensis and Quercus mongolica forests and explored the factors that infl uence spatial variations of these variables after prescribed burning.Our results showed that,MBC declined by approximately 30%in the 10–20 cm soil layer in the Q.mongolica forest,where there were no signifi cant eff ects on the soil MBC and MBN contents of the P.koraiensis forest(p>0.05)after prescribed burning.Compared to the MBC of the Q.mongolica forest before the prescribed burn,MBC spatial dependence in the upper and lower soil layers was approximately 7%and 2%higher,respectively.After the prescribed burn,MBN spatial dependence in the upper and lower soil layers in the P.koraiensis forest was approximately 1%and 13%lower,respectively,than that before the burn,and the MBC spatial variability in the 0–10 cm soil layer in the two forest types was explained by the soil moisture content(SMC),whereas the MBN spatial variability in the 0–10 cm soil layer in the two forests was explained by the soil pH and nitrate nitrogen(NO_(3)^(–)-N),respectively.In the lower soil layer(10–20 cm)of the Q.mongolica forest,elevation and ammonium nitrogen(NH 4+-N)were the main factors aff ecting the spatial variability of MBC and MBN,respectively.In the 10–20 cm soil layer of the P.koraiensis forest,NO_(3)^(–)-N and slope were the main factors aff ecting the spatial variability of MBC and MBN,respectively,after the burn.The spatial distributions of MBC and MBN in the two forests were largely structured with higher spatial autocorrelation(relative structural variance C/[C 0+C]>0.75).However,the factors infl uencing the spatial variability of MBC and MBN in the two forest types were not consistent between the upper and lower soil layers with prescribed burning.These fi ndings have important implications for developing sustainable management and conservation policies for forest ecosystems.
基金The authors would like to thank the National Natural Science Foundation of China(52176095)Anhui Provincial Natural Science Foundation(2008085J25)the Project of support program for outstanding young people in Colleges and Universities(gxyqZD201830)for their financial support of this study.
文摘The laminar combustion characteristics of CH_(4)/air premixed flames with CO_(2) addition are systemically studied.Experimental measurements and numerical simulations of the laminar burning velocity(LBV)are performed in CH_(4)/CO_(2)/Air flames with various CO_(2) doping ratio under equivalence ratios of 1.0–1.4.GRI 3.0 mech and Aramco mech are employed for predicting LBV,adiabatic flame temperature(AFT),important intermediate radicals(CH_(3),H,OH,O)and NO_(x) emissions(NO,NO_(2),N2O),as well as the sensitivity analysis is also conducted.The detail analysis of experiment and simulation reveals that as the CO_(2) addition increases from 0%to 40%,the LBVs and AFTs decrease monotonously.Under the same CO_(2) doping ratio,the LBVs and AFTs increase first and then decrease with the increase of equivalence ratio,and the maximum of LBV is reached at equivalence ratio of 1.05.The mole fraction tendency of important intermediates and NO_(x) with equivalence ratio and CO_(2) doping ratio are similar to the LBVs and AFTs.Reaction H+O_(2)⇔O+OH is found to be responsible for the promotion of the generation of important intermediates and NO_(x) under the equivalence ratios and CO_(2) addition through sensitivity analysis.The sensitivity coefficients of elementary reactions that the increasing of CO_(2) doping ratio promotes or inhibits formation of intermediate radicals and NO_(x) decreases.
基金supported by National Natural Science Foundation of China(11671100 and 12171104)the National Science Fund for Excellent Young Scholars(11922107)Guangxi Natural Science Foundation(2018GXNSFAA138210 and 2019JJG110010)。
文摘The pointwise space-time behaviors of the Green’s function and the global solution to the Vlasov-Poisson-Fokker-Planck(VPFP)system in three dimensional space are studied in this paper.It is shown that the Green’s function consists of the diffusion waves decaying exponentially in time but algebraically in space,and the singular kinetic waves which become smooth for all(t,x,v)when t>0.Furthermore,we establish the pointwise space-time behaviors of the global solution to the nonlinear VPFP system when the initial data is not necessarily smooth in terms of the Green’s function.
基金The financial support by State Key Laboratory of Heavy Oil Processing, China University of Petroleum。
文摘To better understand the benzene alkylation with chloroaluminate ionic liquids(ILs) as catalyst, the interfacial properties between the benzene/butene binary reactants and chloroaluminate ILs with varying cation alkyl chain length and different anions were investigated using molecular dynamics(MD) simulations. The results indicate that ILs can obviously improve the interfacial width, solubility and diffusion of reactants compared to H_(2)SO_(4). The longer alkyl chains of cations present a density enrichment at the interface and protrude into the binary reactants phase. Furthermore, the ILs consisting of 1-octyl-3-methylimidazolium cations([Omim]^(+)) and the stronger acidity heptachlorodialuminate anions([Al_(2)Cl_(7)]^(-)) are more beneficial to promote the interfacial width and facilitate the dissolution and diffusion of benzene in both the IL bulk and the interfacial region in comparison to the ones with shorter alkyl chains cations and weaker acidity anions. The information gives us a better guideline for the design of ILs for benzene alkylation.
基金supported by the National Natural Science Foundation of China(Grant No.51771054,52171236)State Key Program of National Natural Science Foundation of China(Grant No.51631003)+5 种基金National Key Research and Development Program of China(Grant No.2016YFC1102402)Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials(Grant No.AMM2021A01)the Opening Project of Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology(Grant No.ASMA201901)Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX20_0091)Natural Science Foundation of Jiangsu Province(BK20181020)the Introduction of Talent Research Fund in Nanjing Institute of Technology(YKJ201705)
文摘Biomedical degradable materials would be subjected to different degrees and forms of static stress after being implanted in the human body.In this work,the biocorrosion behaviors of AZ31B magnesium alloy under different stress forms with different magnitudes(20~150MPa)were studied.It was found that the corrosion behaviors at stressed conditions were severer than those at unstressed conditions and corrosion rates were obviously accelerated.The biocorrosion behaviors are more sensitive to the effects of tensile loads than to compressive loads.A biocorrosion numerical model on the degradation process of Mg alloy under static loads was established.The corrosion current density(i_(corr))of Mg alloy and the applied static stress(σ)matches a linear relationship of ln i_(corr)~σwell during the early stage(within 24 hrs)while deviated gradually in the latter period of corrosion.This work could provide a guidance and theoretical reference for further researches on the biocorrosion behaviors and practical clinical applications of the biomedical materials subjected to physiological loads.
基金supported by National Natural Science Foundation of China(No.11875039)。
文摘The present study aims at the numerical simulations of the melting process of cerium oxide particles in RF thermal plasma.The physical model and the calculating method were described firstly;the interaction between cerium oxide particles and plasma was analyzed;specific attention was given to the effects of particle initial size,injection velocity on the particle melting and trajectory in plasma.The influence of the temperature field and velocity field distribution of the plasma around the particle trajectory on the melting effect is analyzed,and the relationship between the heat absorption efficiency of the particles and the particle size reduction process is further determined.It is also found that there exists an optimal particle initial injection velocity which led to a more concentrated final particle size distribution and a more significant reduction of particle size.The results could provide effective guidance for understanding the plasma spheroidization process of uranium dioxide and cerium dioxide powder particles.
文摘This study aimed to examine the associations between lifestyle behaviors and depressive symptoms in adolescents.Self-reported data from the 2019 Youth Risk Behavior Survey(YRBS)was analyzed.Depressive symptoms were set as the outcome variable.Movement variables(physical activity,muscle-strengthening exercise,physical education attendance,sports team participation,television watching,video or computer games,and sleep),eating behaviors(fruit intake,vegetable intake,milk intake,and eating breakfast or not),and substance use(alcohol use and cigarette use)were included as explanatory variables.Binary logistic regression was used to explore the asso-ciations between lifestyle behaviors and depressive symptoms after adjusting for sex,age,grade,race,and weight status.Of 13,677 participants who completed the investigation,girls were more than boys(50.3%vs.48.6%).The proportion of participants in grades 9,10,11,and 12 was 26.6,27.2,24.3,and 20.8,respectively.Of them,the prevalence of depressive symptoms was 36.0%(weighted%:36.7%[35.1%,38.3%]).Among all the lifestyle behaviors included,participating in no sports teams(OR=1.53[1.32,1.77]),spending more than 2 h in video or computer games(OR=1.64[1.40,1.92]),sleeping less than 8 h nightly(OR=1.79[1.45,2.20]),not eating breakfast(OR=1.56[1.37,1.78]),alcohol use(OR=1.74[1.49,2.02]),and cigarette use(OR=1.83[1.42,2.37])were associated with higher odds of depressive symptoms.To reduce depressive symptoms in adolescents,interventions can consider encouraging adolescents to engage in team sports activity,limit time for video or com-puter games,sleep enough,regularly eat breakfast,and avoid using alcohol and cigarette.Future studies are encouraged to verify our researchfindings by using a more improved study design.
