Attempts have been made to use cell transplantation and biomaterials to promote cell proliferation,differentiation,migration,and survival,as well as angiogenesis,in the context of brain injury.However,whether bioactiv...Attempts have been made to use cell transplantation and biomaterials to promote cell proliferation,differentiation,migration,and survival,as well as angiogenesis,in the context of brain injury.However,whether bioactive materials can repair the damage caused by ischemic stroke by activating endogenous neurogenesis and angiogenesis is still unknown.In this study,we applied chitosan gel loaded with basic fibroblast growth factor to the stroke cavity 7 days after ischemic stroke in rats.The gel slowly released basic fibroblast growth factor,which improved the local microenvironment,activated endogenous neural stem/progenitor cells,and recruited these cells to migrate toward the penumbra and stroke cavity and subsequently differentiate into neurons,while enhancing angiogenesis in the penumbra and stroke cavity and ultimately leading to partial functional recovery.This study revealed the mechanism by which bioactive materials repair ischemic strokes,thus providing a new strategy for the clinical application of bioactive materials in the treatment of ischemic stroke.展开更多
Sodium alginate(SA)/chitosan(CH)polyelectrolyte scaffold is a suitable substrate for tissue-engineering application.The present study deals with further improvement in the tensile strength and biological properties of...Sodium alginate(SA)/chitosan(CH)polyelectrolyte scaffold is a suitable substrate for tissue-engineering application.The present study deals with further improvement in the tensile strength and biological properties of this type of scaffold to make it a potential template for bone-tissue regeneration.We experimented with adding 0%–15%(volume fraction)gelatin(GE),a protein-based biopolymer known to promote cell adhesion,proliferation,and differentiation.The resulting tri-polymer complex was used as bioink to fabricate SA/CH/GEmatrices by three-dimensional(3D)printing.Morphological studies using scanning electron microscopy revealed the microfibrous porous architecture of all the structures,which had a pore size range of 383–419μm.X-ray diffraction and Fourier-transform infrared spectroscopy analyses revealed the amorphous nature of the scaffold and the strong electrostatic interactions among the functional groups of the polymers,thereby forming polyelectrolyte complexes which were found to improve mechanical properties and structural stability.The scaffolds exhibited a desirable degradation rate,controlled swelling,and hydrophilic characteristics which are favorable for bone-tissue engineering.The tensile strength improved from(386±15)to(693±15)kPa due to the increased stiffness of SA/CH scaffolds upon addition of gelatin.The enhanced protein adsorption and in vitro bioactivity(forming an apatite layer)confirmed the ability of the SA/CH/GE scaffold to offer higher cellular adhesion and a bone-like environment to cells during the process of tissue regeneration.In vitro biological evaluation including the MTT assay,confocal microscopy analysis,and alizarin red S assay showed a significant increase in cell attachment,cell viability,and cell proliferation,which further improved biomineralization over the scaffold surface.In addition,SA/CH containing 15%gelatin designated as SA/CH/GE15 showed superior performance to the other fabricated 3D structures,demonstrating its potential for use in bone-tissue engineering.展开更多
Neurotrophic keratopathy is a persistent defect of the corneal epithelium,with or without stromal ulceration,due to corneal nerve deficiency caused by a variety of etiologies.The treatment options for neurotrophic ker...Neurotrophic keratopathy is a persistent defect of the corneal epithelium,with or without stromal ulceration,due to corneal nerve deficiency caused by a variety of etiologies.The treatment options for neurotrophic keratopathy are limited.In this study,an ophthalmic solution was constructed from a chitosan-based thermosensitive hydrogel with long-term release of murine nerve growth factor(CTH-mNGF).Its effectiveness was evaluated in corneal denervation(CD)mice and patients with neurotrophic keratopathy.In the preclinical setting,CTH-mNGF was assessed in a murine corneal denervation model.CTH-mNGF was transparent,thermosensitive,and ensured sustained release of mNGF for over 20 hours on the ocular surface,maintaining the local mNGF concentration around 1300 pg/mL in vivo.Corneal denervation mice treated with CTH-mNGF for 10 days showed a significant increase in corneal nerve area and total corneal nerve length compared with non-treated and CTH treated mice.A subsequent clinical trial of CTH-mNGF was conducted in patients with stage 2 or 3 neurotrophic keratopathy.Patients received topical CTH-mNGF twice daily for 8 weeks.Fluorescein sodium images,Schirmer’s test,intraocular pressure,Cochet-Bonnet corneal perception test,and best corrected visual acuity were evaluated.In total,six patients(total of seven eyes)diagnosed with neurotrophic keratopathy were enrolled.After 8 weeks of CTH-mNGF treatment,all participants showed a decreased area of corneal epithelial defect,as stained by fluorescence.Overall,six out of seven eyes had fluorescence staining scores<5.Moreover,best corrected visual acuity,intraocular pressure,Schirmer’s test and Cochet-Bonnet corneal perception test results showed no significant improvement.An increase in corneal nerve density was observed by in vivo confocal microscopy after 8 weeks of CTH-mNGF treatment in three out of seven eyes.This study demonstrates that CTH-mNGF is transparent,thermosensitive,and has sustained-release properties.Its effectiveness in healing corneal epithelial defects in all eyes with neurotrophic keratopathy suggests CTH-mNGF has promising application prospects in the treatment of neurotrophic keratopathy,being convenient and cost effective.展开更多
The abuse of plastic food packaging has brought about severe white pollution issues around the world.Developing green and sustainable biomass packaging is an effective way to solve this problem.Hence,a chitosan/sodium...The abuse of plastic food packaging has brought about severe white pollution issues around the world.Developing green and sustainable biomass packaging is an effective way to solve this problem.Hence,a chitosan/sodium alginate-based multilayer film is fabricated via a layer-by-layer(LBL)self-assembly method.With the help of superior interaction between the layers,the multilayer film possesses excellent mechanical properties(with a tensile strength of 50 MPa).Besides,the film displays outstanding water retention property(blocking moisture of 97.56%)and ultraviolet blocking property.Anthocyanin is introduced into the film to detect the food quality since it is one natural plant polyphenol that is sensitive to the pH changes ranging from 1 to 13 in food when spoilage occurs.It is noted that the film is also bacteriostatic which is desired for food packaging.This study describes a simple technique for the development of advanced multifunctional and fully biodegradable food packaging film and it is a sustainable alternative to plastic packaging.展开更多
Objective:To improve the quality of post-thawing Boer buck semen for artificial insemination by adding green tea extract chitosan nanoparticles to skimmed egg yolk diluent,and the proper thawing temperature.Methods:Th...Objective:To improve the quality of post-thawing Boer buck semen for artificial insemination by adding green tea extract chitosan nanoparticles to skimmed egg yolk diluent,and the proper thawing temperature.Methods:The ejaculate of Boer buck was added to skimmed egg yolk diluent without(the control group)and with adding 1μg of chitosan nanoparticles of green tea extract per mL of diluent(the treatment group).Then,the diluted semen was filled in French mini straws containing 60×106 live sperm per straw,frozen in a standard protocol,and stored as frozen semen at−196℃for a week.Six replicates from each group were diluted for 30 s at 37℃or 39℃sterile water to evaluate the semen quality.Results:Post-thawing(at 37℃or 39℃)of live sperm,progressive motility,and plasma membrane integrity were lower compared to those of the pre-freezing stage(P<0.05).Thawing at 37℃resulted in no significant difference in live sperm,progressive motility,and plasma membrane between the control group and the treatment group(P>0.05).The live sperm,progressive motility,and plasma membrane of the treatment group in the pre-freezing stage,and post-thawed at 39℃were higher compared to those of the control group(P<0.05).There was no significant difference in malondialdehyde(MDA)concentration,DNA fragmentation,and catalase concentration of thawing at 37℃compared to those of 39℃in the same group.The MDA concentration and DNA fragmentation in thawing at 37℃and 39℃of the treatment group were significantly lower than those of the control group(P<0.05).However,the catalase concentration in thawing at 37℃and 39℃of the treatment group was not significantly different than the control group(P>0.05).Conclusions:Higher quality post-thawing Boer buck semen is achieved by adding 1μg/mL of chitosan nanoparticles of green tea extract to the skimmed egg yolk diluent and thawing at 39℃.展开更多
The production and consumption of avocado pears generates tons of wastes, mainly the pear peels which are usually discarded, although they have been reported to contain important phyto-chemicals with biological activi...The production and consumption of avocado pears generates tons of wastes, mainly the pear peels which are usually discarded, although they have been reported to contain important phyto-chemicals with biological activities. The adverse health effect associated with the consumption of saturated lipid based foods has ignited research on reformulation of lipid based foods to eliminate Trans Fatty Acids (TFAs). This study was thus aimed at the extraction and characterization of oil from Avocado Peels (APO) and evaluation of the quality of margarine produced from it. Five verities of pear were used for oil extraction by soxhlet method and physiochemical, oxidative, functional and antioxidant characterization was done. Margarines were formulated using a central composite design using oil blends of APO and Virgin Coconut Oil (VCO) with an oil ratio of 10:90, 40:60, 70:30 respectively, varied blending speed, blending time, and chitosan concentration. Samples were characterized and the effect of process parameters on the physiochemical and functional properties of the margarine studied. Optimized conditions were used to produce samples for sensory evaluation. Color, spreadability, aroma, taste and general acceptability was evaluated using ranking difference test. The results showed that the yield, density, and iodine values of APOs oils ranged from 14.91 ± 0.18 to 11.76 ± 0.46;0.93 ± 0.001 to 0.99 ± 0.1;46.63 ± 1.70 to 52.4 ± 0.63, their acid values, TBA and PV values ranged from 1.42 ± 0.39 to 1.97 ± 0.5;0.11 ± 0.002 to 0.18 ± 0.04;and 2.72 ± 0.14 to 4.43 ± 0.36 respectively, with Brogdon avocado peel variety having the overall best properties prepared blends of trans-free APO margarines showed that increase in APO ratio decreased melting point, increased oxidative stability and reduced moisture content of margarine samples. Chitosan addition leads to decrease moisture content and increase functional properties. VCO lead to increase in phenolic and flavonoid content of the margarines. Samples were spreadable and palatable with R20 being most palatable and the most accepted being R26 with a mean score of 7.07 ± 0.70. Decrease in color intensity increased acceptability. This study therefore demonstrated that avocado peel waste biomass can be valorized by using it as raw material for oil extraction, which can serve as good material for the production of trans-free margarines with good oxidative stability, functional and antioxidant properties.展开更多
This study was carried out to prepare ZnO nanoparticles incorporated acrylamide grafted chitosan composite film for possible biomedical application especially drug loading in wound healing. ZnO nanoparticles were prep...This study was carried out to prepare ZnO nanoparticles incorporated acrylamide grafted chitosan composite film for possible biomedical application especially drug loading in wound healing. ZnO nanoparticles were prepared by co-precipitation method from zinc acetate di-hydrate and incorporated in acrylamide grafted chitosan. FT-IR and TGA of the prepared composite film confirmed the successful incorporation of ZnO nanoparticles in the acrylamide-grafted polymer matrix. SEM images showed that the ZnO nanoparticles were homogeneously distributed on the porous matrix of the composite film. Water uptake and buffer uptake analysis revealed that the composite film could hold water and buffer sufficiently, which facilitated the absorption of exudate from the wound site. Amoxicillin was loaded in the prepared composite film and the maximum loading efficiency was found to be 67.33% with drug concentration of 300 ppm. In vitro studies showed greater antimicrobial activity of drug-loaded composite film compared to both pure film and standard antibiotic disc. Finally, the In vivo mouse model showed maximum healing efficiency compared to conventional gauge bandages because the loading of antibiotic in the film produced a synergistic effect and healing time was reduced.展开更多
Currently available commercial nerve guidance conduits have been applied in the repair of peripheral nerve defects.However,a conduit exhibiting good biocompatibility remains to be developed.In this work,a series of ch...Currently available commercial nerve guidance conduits have been applied in the repair of peripheral nerve defects.However,a conduit exhibiting good biocompatibility remains to be developed.In this work,a series of chitosan/graphene oxide(GO)films with concentrations of GO varying from 0-1 wt%(collectively referred to as CHGF-n)were prepared by an electrodeposition technique.The effects of CHGF-n on proliferation and adhesion abilities of Schwann cells were evaluated.The results showed that Schwann cells exhibited elongated spindle shapes and upregulated expression of nerve regeneration-related factors such as Krox20(a key myelination factor),Zeb2(essential for Schwann cell differentiation,myelination,and nerve repair),and transforming growth factorβ(a cytokine with regenerative functions).In addition,a nerve guidance conduit with a GO content of 0.25%(CHGFC-0.25)was implanted to repair a 10-mm sciatic nerve defect in rats.The results indicated improvements in sciatic functional index,electrophysiology,and sciatic nerve and gastrocnemius muscle histology compared with the CHGFC-0 group,and similar outcomes to the autograft group.In conclusion,we provide a candidate method for the repair of peripheral nerve defects using free-standing chitosan/GO nerve conduits produced by electrodeposition.展开更多
Silver nanoparticles(Ag NPs)are an effective antibacterial agent,but their application in food packaging is limited due to their easy agglomeration and oxidation.In this study,antibacterial microcapsules were fabricat...Silver nanoparticles(Ag NPs)are an effective antibacterial agent,but their application in food packaging is limited due to their easy agglomeration and oxidation.In this study,antibacterial microcapsules were fabricated using Ginkgo biloba essential oil(GBEO)as core material and chitosan and type B gelatin biopolymer as capsule mate-rials.These antibacterial microcapsules were then modified with green-synthesized Ag NPs,blended into the bio-polymer polylactic acid(PLA),and finally formed as films.Physicochemical properties and antibacterial activity against Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)were evaluated.Results showed that the prepared antibacterial PLA films exhibited excellent antibacterial activity against foodborne pathogens.Its TVC exceeded the limit value of 7 log CFU/g at 7 days compared with the 5 days of pure PLA films.Therefore,these films can extend the shelf life of grass carp fillets by 2–3 days under refrigeration.展开更多
There are various clinical treatments for traumatic brain injury,including surgery,drug therapy,and rehabilitation therapy;howeve r,the therapeutic effects are limited.Scaffolds combined with exosomes represent a prom...There are various clinical treatments for traumatic brain injury,including surgery,drug therapy,and rehabilitation therapy;howeve r,the therapeutic effects are limited.Scaffolds combined with exosomes represent a promising but challenging method for improving the repair of traumatic brain injury.In this study,we determined the ability of a novel 3D-printed collagen/chitosan scaffold loaded with exosomes derived from neural stem cells pretreated with insulin-like growth factor-1(3D-CC-INEXOS) to improve traumatic brain injury repair and functional recove ry after traumatic brain injury in rats.Composite scaffolds comprising collagen,chitosan,and exosomes derived from neural stem cells pretreated with insulin-like growth fa ctor-1(INEXOS) continuously released exosomes for 2weeks.Transplantation of 3D-CC-INExos scaffolds significantly improved motor and cognitive functions in a rat traumatic brain injury model,as assessed by the Morris water maze test and modified neurological seve rity scores.In addition,immunofluorescence staining and transmission electron microscopy showed that3D-CC-INExos implantation significantly improved the recove ry of damaged nerve tissue in the injured area.In conclusion,this study suggests that transplanted3D-CC-INExos scaffolds might provide a potential strategy for the treatment of traumatic brain injury and lay a solid foundation for clinical translation.展开更多
A new magnetic nanocomposite chitosan/EDTA/CeZnO(MEC-CeZnO)is synthesized as an efficient and eco-friendly bio-compound for the removal of chromium Cr(VI)metal ions and phenol organic matters from aqueous solutions.Na...A new magnetic nanocomposite chitosan/EDTA/CeZnO(MEC-CeZnO)is synthesized as an efficient and eco-friendly bio-compound for the removal of chromium Cr(VI)metal ions and phenol organic matters from aqueous solutions.Nanocomposites are characterized using field emission scanning electron microscope,energy dispersive X-ray spectroscopy,transmission electron microscope,X-ray diffraction,X-ray photoelectron spectroscopy,Fourier transform infrared spectroscopy,diffuse reflection spectroscopy,and PL methods.The reduction rate of Cr(VI)ions and phenol degradation is evaluated under various experimental conditions,separately and simultaneously.The average pore diameter and specific surface of MEC-CeZnO nanocomposite are obtained 50 nm and 210 m^(2)·g^(-1)respectively,which suggest the successful synthesis of the nanocomposite because of the increased surface area and reduced pores in comparison to previous studies.Moreover,the best Cr(VI)and phenol reduction efficiencies are 98%and 92%at 180 min of retention time,both following the Langmuir-Hinshelwood first-order kinetics.The mechanisms of Cr(VI)and phenol removal from aqueous solutions involved Cr(VI)reduction,phenol oxidation,and adsorption.Examining the reusability of MEC-CeZnO showed that both degradation and recovery capacity is stable in 5 cycles.展开更多
Excessive turbidity in water is aesthetically unappealing and severely malfunctions the photosynthesis process of aquatic ecosystems. This study aimed to evaluate the effectiveness of a nanocomposite adsorbent made of...Excessive turbidity in water is aesthetically unappealing and severely malfunctions the photosynthesis process of aquatic ecosystems. This study aimed to evaluate the effectiveness of a nanocomposite adsorbent made of graphene oxide-keratin-chitosan for removing turbidity from tannery influent. The nanocomposite was fabricated with simple solution casting methods. Material dispersibility, bonding between composite materials (amide linkage), and the surface morphology of the nanocomposite were analyzed with the ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and scanning electron microscopy. At pH of 6, 2 g/L of adsorbent and a 25-min contact time resulted in about 88% of turbidity elimination. After the adsorption process, the total suspended solids, total dissolved solids, salinity, biochemical oxygen demand, and chemical oxygen demand of the tannery wastewater were reduced by 55%, 29%, 12%, 58%, and 75%, respectively. The optimum dosage of the nanocomposite with the maximum turbidity removal capacity was 12.62 mg/g. According the adsorption kinetic and isotherm models, the graphene oxide-keratin-chitosan nanocomposite played a key role in the turbidity removal process with chemisorption and electrostatic multilayer adsorption. This study provided methodological and mechanistic insights into the procedures of investigating the removal of turbidity from tannery wastewater with a novel composite material.展开更多
Aqueous zinc batteries with low cost and inherent safety are considered to be the most promising energy storage devices.However,they suffer from poor cycling stability and low coulombic efficiencies caused by the adve...Aqueous zinc batteries with low cost and inherent safety are considered to be the most promising energy storage devices.However,they suffer from poor cycling stability and low coulombic efficiencies caused by the adverse zinc dendrites on the anodes during the discharging/charging processes.Chitosan is a kind of natural amino polysaccharide,which is rich in nitrogen and carbon.When sintered at high temperatures,carbon membranes have been achieved with excellent conductivity and graphitization degree,which could enhance the ability to induce zinc ion uniform deposition to some extent.In this work,a type of carbon membrane using chitosan as raw materials has been fabricated by sintering,and then assembled as the protect layers in aqueous zinc batteries.The results show that the samples could retain smoother surfaces when adopting the sintering temperature of 800℃,and the assembled batteries are able to achieve about 700 h at a current density of 0.25m A·cm^(-2),which is far longer than those of the similar batteries without any carbon membranes.展开更多
This work aims to prepare chitosan(CS)-based coated layers,CS(10 wt%nanosilver/90 wt%CS,10 wt%biotin/90 wt%CS,and 5 wt%nanosilver–5 wt%biotin)/90 wt%CS coatings are prepared,onto pure Ti substrate.The surface morphol...This work aims to prepare chitosan(CS)-based coated layers,CS(10 wt%nanosilver/90 wt%CS,10 wt%biotin/90 wt%CS,and 5 wt%nanosilver–5 wt%biotin)/90 wt%CS coatings are prepared,onto pure Ti substrate.The surface morphology of the novel CS composite coating was studied using field emission scanning electron microscopy,atomic force microscopy(AFM),Fourier transforms infrared(FTIR)and wettability test.Results show that the addition of(biotin,nanosilver)5 Vol.%improves the properties of composite materials.Using different particles’scale size aid in improving the combinations in the alginate,producing a dual effect on film properties.Coating surface roughness decreased in the chitosan-based biocomposite with preferable homogeneity and crack-free coating layers,as confirmed by AFM.An increase in surface roughness ensured substitution,which enhanced the surface structures.The high wettability of the CS-based coating layers was due to the presence of nanoparticles,and the composite coatings with CS,nanosilver,or biotin had excellent wettability because of the good hydrophilic nature of the CS matrix combined with reinforced particles.The FTIR results showed that peaks of the blending of CS plus nanoparticles,CS plus biotin,or CS plus nanosilver plus biotin were excellent matching with no changes in the structure of the matrix.展开更多
Citric acid(CA)and chitosan(CS)were employed to modify magnesium oxychloride cement(MOC).Multiscale measurements were implemented to study the properties of the modified MOC pastes.Results show that the addition of CA...Citric acid(CA)and chitosan(CS)were employed to modify magnesium oxychloride cement(MOC).Multiscale measurements were implemented to study the properties of the modified MOC pastes.Results show that the addition of CA/CS significantly changes the content of each phase and the microstructure of phase 5.The single addition of CA can effectively increase the compressive strength of MOC after 7 d curing,while CS exerts no obvious effect on the compressive strength.As to the simultaneous addition of CA and CS,the compressive strength of MOC gradually decreases with the increasing content of CS.Interestingly,mixing CA and CS significantly enhances the water resistance of MOC and decreases the degradation rate of MOC in phosphate buffered solution,which can be ascribed to the low specific surface area of the plate-like crystals in the modified MOC and the reduction of pores in the structure.展开更多
Corrugated surface microparticles comprising levofloxacin(LEV),chitosan and organic acid were prepared using the 3-combo spray drying method.The amount and the boiling point of the organic acid affected the degree of ...Corrugated surface microparticles comprising levofloxacin(LEV),chitosan and organic acid were prepared using the 3-combo spray drying method.The amount and the boiling point of the organic acid affected the degree of roughness.In this study,we tried to improve the aerodynamic performance and increase aerosolization by corrugated surface microparticle for lung drug delivery efficiency as dry powder inhaler.HMP175 L20 prepared with 175 mmol propionic acid solution was corrugated more than HMF175 L20 prepared with 175 mmol formic acid solution.The ACI and PIV results showed a significant increase in aerodynamic performance of corrugated microparticles.The FPF value of HMP175 L20 was 41.3%±3.9%compared with 25.6%±7.7%of HMF175 L20.Corrugated microparticles also showed better aerosolization,decreased x-axial velocity,and variable angle.Rapid dissolution of drug formulationswas observed in vivo.Lowdoses administered to the lungs achieved higher LEV concentrations in the lung fluid than high doses administered orally.Surface modification in the polymer-based formulation was achieved by controlling the evaporation rate and improving the inhalation efficiency of DPIs.展开更多
In the process of exploration and development of oil and gas fields, the acidic environment of oil reservoir, production and transport processes cause corrosion of pipelines and equipment, resulting in huge economic l...In the process of exploration and development of oil and gas fields, the acidic environment of oil reservoir, production and transport processes cause corrosion of pipelines and equipment, resulting in huge economic losses and production safety risks. Corrosion inhibitors were widely used in oil industry because of simple operation process and economical. In this study, three environmentally friendly corrosion inhibitors were synthesized based on the natural polysaccharide chitosan. Corrosion inhibition of three dendritic chitosan derivatives (We name them BH, CH and DH) on mild steel in 1 mol/L HCl solution with natural ventilation system was evaluated by weight loss experiment, electrochemical analysis and surface morphology characterization. The experimental results showed that when the three dendritic chitosan derivatives added in the corrosive medium were 500 mg L^(−1), the corrosion inhibition efficiencies were all more than 80%. Based on quantum chemical calculation, inhibition mechanisms of three dendritic chitosan derivatives were investigated according to molecular structures. The results showed that the benzene ring, Schiff base and N atom contained in the molecule were the active centers of electron exchange, which were more likely to form a film on the carbon steel surface, thereby slowing or inhibiting corrosion. The results also predicted the corrosion inhibition effect BH > DH > CH, which was consistent with the experimental conclusion.展开更多
Three-dimensional printing technologies exhibit tremendous potential in the advancing fields of tissue engineering and regenerative medicine due to the precise spatial control over depositing the biomaterial.Despite t...Three-dimensional printing technologies exhibit tremendous potential in the advancing fields of tissue engineering and regenerative medicine due to the precise spatial control over depositing the biomaterial.Despite their widespread utilization and numerous advantages,the development of suitable novel biomaterials for extrusion-based 3D printing of scaffolds that support cell attachment,proliferation,and vascularization remains a challenge.Multi-material composite hydrogels present incredible potential in this field.Thus,in this work,a multi-material composite hydrogel with a promising formulation of chitosan/gelatin functionalized with egg white was developed,which provides good printability and shape fidelity.In addition,a series of comparative analyses of different crosslinking agents and processes based on tripolyphosphate(TPP),genipin(GP),and glutaraldehyde(GTA)were investigated and compared to select the ideal crosslinking strategy to enhance the physicochemical and biological properties of the fabricated scaffolds.All of the results indicate that the composite hydrogel and the resulting scaffolds utilizing TPP crosslinking have great potential in tissue engineering,especially for supporting neo-vessel growth into the scaffold and promoting angiogenesis within engineered tissues.展开更多
Lithium-sulfur(Li-S) batteries can provide far higher energy density than currently commercialized lithium ion batteries, but challenges remain before it they are used in practice.One of the challenges is the shuttle ...Lithium-sulfur(Li-S) batteries can provide far higher energy density than currently commercialized lithium ion batteries, but challenges remain before it they are used in practice.One of the challenges is the shuttle effect that originates from soluble intermediates, like lithium polysulfides. To address this issue, we report a novel laminar composite, N,O-carboxymethyl chitosan-reduced graphene oxide(CC-rGO), which is manufactured via the self-assembly of CC onto GO and subsequent reduction of GO under an extreme condition of 1 Pa and-50°C. The synthesized laminar CC-rGO composite is mixed with acetylene black(AB) and coated on a commercial polypropylene(PP) membrane, resulting in a separator(CC-rGO/AB/PP) that can not only completely suppress the polysulfides penetration, but also can accelerate the lithium ion transportation, providing a Li-S battery with excellent cyclic stability and rate capability. As confirmed by theoretic simulations, this unique feature of CC-rGO is attributed to its strong repulsive interaction to polysulfide anions and its benefit for fast lithium ion transportation through the paths paved by the heteroatoms in CC.展开更多
The electrochemical performances of cathode play a key role in the marine sediment microbial fuel cells(MSMFCs)as a long lasting power source to drive instruments,especially when the dissolved oxygen concentration is ...The electrochemical performances of cathode play a key role in the marine sediment microbial fuel cells(MSMFCs)as a long lasting power source to drive instruments,especially when the dissolved oxygen concentration is very low in seawater.A CTS-Fe^(3+)modified cathode is prepared here by grafting chitosan(CTS)on a carbon fiber surface and then chelating Fe^(3+)through the coordination process.The electrochemical performance in seawater and the output power of the assembled MSMFCs are both studied.The results show that the exchange current densities of CTS and the CTS-Fe^(3+)group are 5.5 and 6.2 times higher than that of the blank group,respectively.The potential of the CTS-Fe^(3+)modified cathode increases by 138 mV.The output power of the fuel cell(613.0 mW m^(-2))assembled with CTS-Fe^(3+)is 54 times larger than that of the blank group(11.4 mW m^(-2))and the current output corresponding with the maximum power output also increases by 56 times.Due to the valence conversion between Fe^(3+)and Fe^(2+)on the modified cathode,the kinetic activity of the dissolved oxygen reduction is accelerated and the depolarization capability of the cathode is enhanced,resulting higher cell power.On the basis of this study,the new cathode materials will be encouraged to design with the complex of iron ion in natural seawater as the catalysis for oxygen reduction to improve the cell power in deep sea.展开更多
基金supported by the National Natural Science Foundation of China,Nos.81941011(to XL),31771053(to HD),31730030(to XL),31971279(to ZY),31900749(to PH),31650001(to XL),31320103903(to XL),31670988(to ZY)the Natural Science Foundation of Beijing,Nos.7222004(to HD)+1 种基金a grant from Ministry of Science and Technology of China,Nos.2017YFC1104002(to ZY),2017YFC1104001(to XL)a grant from Beihang University,No.JKF-YG-22-B001(to FH)。
文摘Attempts have been made to use cell transplantation and biomaterials to promote cell proliferation,differentiation,migration,and survival,as well as angiogenesis,in the context of brain injury.However,whether bioactive materials can repair the damage caused by ischemic stroke by activating endogenous neurogenesis and angiogenesis is still unknown.In this study,we applied chitosan gel loaded with basic fibroblast growth factor to the stroke cavity 7 days after ischemic stroke in rats.The gel slowly released basic fibroblast growth factor,which improved the local microenvironment,activated endogenous neural stem/progenitor cells,and recruited these cells to migrate toward the penumbra and stroke cavity and subsequently differentiate into neurons,while enhancing angiogenesis in the penumbra and stroke cavity and ultimately leading to partial functional recovery.This study revealed the mechanism by which bioactive materials repair ischemic strokes,thus providing a new strategy for the clinical application of bioactive materials in the treatment of ischemic stroke.
基金The authors are thankful to Ministry of Human Resource Development(presently Ministry of Education),Government of India,New Delhi,for providing research facility by sanctioning Center of Excellence(F.No.5-6/2013-TS VII)in Tissue Engineering and Center of Excellence in Orthopedic Tissue Engineering and Rehabilitation funded by World Bank under TEQIP-II.
文摘Sodium alginate(SA)/chitosan(CH)polyelectrolyte scaffold is a suitable substrate for tissue-engineering application.The present study deals with further improvement in the tensile strength and biological properties of this type of scaffold to make it a potential template for bone-tissue regeneration.We experimented with adding 0%–15%(volume fraction)gelatin(GE),a protein-based biopolymer known to promote cell adhesion,proliferation,and differentiation.The resulting tri-polymer complex was used as bioink to fabricate SA/CH/GEmatrices by three-dimensional(3D)printing.Morphological studies using scanning electron microscopy revealed the microfibrous porous architecture of all the structures,which had a pore size range of 383–419μm.X-ray diffraction and Fourier-transform infrared spectroscopy analyses revealed the amorphous nature of the scaffold and the strong electrostatic interactions among the functional groups of the polymers,thereby forming polyelectrolyte complexes which were found to improve mechanical properties and structural stability.The scaffolds exhibited a desirable degradation rate,controlled swelling,and hydrophilic characteristics which are favorable for bone-tissue engineering.The tensile strength improved from(386±15)to(693±15)kPa due to the increased stiffness of SA/CH scaffolds upon addition of gelatin.The enhanced protein adsorption and in vitro bioactivity(forming an apatite layer)confirmed the ability of the SA/CH/GE scaffold to offer higher cellular adhesion and a bone-like environment to cells during the process of tissue regeneration.In vitro biological evaluation including the MTT assay,confocal microscopy analysis,and alizarin red S assay showed a significant increase in cell attachment,cell viability,and cell proliferation,which further improved biomineralization over the scaffold surface.In addition,SA/CH containing 15%gelatin designated as SA/CH/GE15 showed superior performance to the other fabricated 3D structures,demonstrating its potential for use in bone-tissue engineering.
基金supported by PLA General Hospital Program,No.LB20201A010024(to LW).
文摘Neurotrophic keratopathy is a persistent defect of the corneal epithelium,with or without stromal ulceration,due to corneal nerve deficiency caused by a variety of etiologies.The treatment options for neurotrophic keratopathy are limited.In this study,an ophthalmic solution was constructed from a chitosan-based thermosensitive hydrogel with long-term release of murine nerve growth factor(CTH-mNGF).Its effectiveness was evaluated in corneal denervation(CD)mice and patients with neurotrophic keratopathy.In the preclinical setting,CTH-mNGF was assessed in a murine corneal denervation model.CTH-mNGF was transparent,thermosensitive,and ensured sustained release of mNGF for over 20 hours on the ocular surface,maintaining the local mNGF concentration around 1300 pg/mL in vivo.Corneal denervation mice treated with CTH-mNGF for 10 days showed a significant increase in corneal nerve area and total corneal nerve length compared with non-treated and CTH treated mice.A subsequent clinical trial of CTH-mNGF was conducted in patients with stage 2 or 3 neurotrophic keratopathy.Patients received topical CTH-mNGF twice daily for 8 weeks.Fluorescein sodium images,Schirmer’s test,intraocular pressure,Cochet-Bonnet corneal perception test,and best corrected visual acuity were evaluated.In total,six patients(total of seven eyes)diagnosed with neurotrophic keratopathy were enrolled.After 8 weeks of CTH-mNGF treatment,all participants showed a decreased area of corneal epithelial defect,as stained by fluorescence.Overall,six out of seven eyes had fluorescence staining scores<5.Moreover,best corrected visual acuity,intraocular pressure,Schirmer’s test and Cochet-Bonnet corneal perception test results showed no significant improvement.An increase in corneal nerve density was observed by in vivo confocal microscopy after 8 weeks of CTH-mNGF treatment in three out of seven eyes.This study demonstrates that CTH-mNGF is transparent,thermosensitive,and has sustained-release properties.Its effectiveness in healing corneal epithelial defects in all eyes with neurotrophic keratopathy suggests CTH-mNGF has promising application prospects in the treatment of neurotrophic keratopathy,being convenient and cost effective.
基金National Undergraduate Training Program for Innovation and Entrepreneurship of China (Grant No.202210288027).
文摘The abuse of plastic food packaging has brought about severe white pollution issues around the world.Developing green and sustainable biomass packaging is an effective way to solve this problem.Hence,a chitosan/sodium alginate-based multilayer film is fabricated via a layer-by-layer(LBL)self-assembly method.With the help of superior interaction between the layers,the multilayer film possesses excellent mechanical properties(with a tensile strength of 50 MPa).Besides,the film displays outstanding water retention property(blocking moisture of 97.56%)and ultraviolet blocking property.Anthocyanin is introduced into the film to detect the food quality since it is one natural plant polyphenol that is sensitive to the pH changes ranging from 1 to 13 in food when spoilage occurs.It is noted that the film is also bacteriostatic which is desired for food packaging.This study describes a simple technique for the development of advanced multifunctional and fully biodegradable food packaging film and it is a sustainable alternative to plastic packaging.
基金funded by Universitas Airlangga,Indonesia,contract number:1405/UN3.1.6/PT/2022.
文摘Objective:To improve the quality of post-thawing Boer buck semen for artificial insemination by adding green tea extract chitosan nanoparticles to skimmed egg yolk diluent,and the proper thawing temperature.Methods:The ejaculate of Boer buck was added to skimmed egg yolk diluent without(the control group)and with adding 1μg of chitosan nanoparticles of green tea extract per mL of diluent(the treatment group).Then,the diluted semen was filled in French mini straws containing 60×106 live sperm per straw,frozen in a standard protocol,and stored as frozen semen at−196℃for a week.Six replicates from each group were diluted for 30 s at 37℃or 39℃sterile water to evaluate the semen quality.Results:Post-thawing(at 37℃or 39℃)of live sperm,progressive motility,and plasma membrane integrity were lower compared to those of the pre-freezing stage(P<0.05).Thawing at 37℃resulted in no significant difference in live sperm,progressive motility,and plasma membrane between the control group and the treatment group(P>0.05).The live sperm,progressive motility,and plasma membrane of the treatment group in the pre-freezing stage,and post-thawed at 39℃were higher compared to those of the control group(P<0.05).There was no significant difference in malondialdehyde(MDA)concentration,DNA fragmentation,and catalase concentration of thawing at 37℃compared to those of 39℃in the same group.The MDA concentration and DNA fragmentation in thawing at 37℃and 39℃of the treatment group were significantly lower than those of the control group(P<0.05).However,the catalase concentration in thawing at 37℃and 39℃of the treatment group was not significantly different than the control group(P>0.05).Conclusions:Higher quality post-thawing Boer buck semen is achieved by adding 1μg/mL of chitosan nanoparticles of green tea extract to the skimmed egg yolk diluent and thawing at 39℃.
文摘The production and consumption of avocado pears generates tons of wastes, mainly the pear peels which are usually discarded, although they have been reported to contain important phyto-chemicals with biological activities. The adverse health effect associated with the consumption of saturated lipid based foods has ignited research on reformulation of lipid based foods to eliminate Trans Fatty Acids (TFAs). This study was thus aimed at the extraction and characterization of oil from Avocado Peels (APO) and evaluation of the quality of margarine produced from it. Five verities of pear were used for oil extraction by soxhlet method and physiochemical, oxidative, functional and antioxidant characterization was done. Margarines were formulated using a central composite design using oil blends of APO and Virgin Coconut Oil (VCO) with an oil ratio of 10:90, 40:60, 70:30 respectively, varied blending speed, blending time, and chitosan concentration. Samples were characterized and the effect of process parameters on the physiochemical and functional properties of the margarine studied. Optimized conditions were used to produce samples for sensory evaluation. Color, spreadability, aroma, taste and general acceptability was evaluated using ranking difference test. The results showed that the yield, density, and iodine values of APOs oils ranged from 14.91 ± 0.18 to 11.76 ± 0.46;0.93 ± 0.001 to 0.99 ± 0.1;46.63 ± 1.70 to 52.4 ± 0.63, their acid values, TBA and PV values ranged from 1.42 ± 0.39 to 1.97 ± 0.5;0.11 ± 0.002 to 0.18 ± 0.04;and 2.72 ± 0.14 to 4.43 ± 0.36 respectively, with Brogdon avocado peel variety having the overall best properties prepared blends of trans-free APO margarines showed that increase in APO ratio decreased melting point, increased oxidative stability and reduced moisture content of margarine samples. Chitosan addition leads to decrease moisture content and increase functional properties. VCO lead to increase in phenolic and flavonoid content of the margarines. Samples were spreadable and palatable with R20 being most palatable and the most accepted being R26 with a mean score of 7.07 ± 0.70. Decrease in color intensity increased acceptability. This study therefore demonstrated that avocado peel waste biomass can be valorized by using it as raw material for oil extraction, which can serve as good material for the production of trans-free margarines with good oxidative stability, functional and antioxidant properties.
文摘This study was carried out to prepare ZnO nanoparticles incorporated acrylamide grafted chitosan composite film for possible biomedical application especially drug loading in wound healing. ZnO nanoparticles were prepared by co-precipitation method from zinc acetate di-hydrate and incorporated in acrylamide grafted chitosan. FT-IR and TGA of the prepared composite film confirmed the successful incorporation of ZnO nanoparticles in the acrylamide-grafted polymer matrix. SEM images showed that the ZnO nanoparticles were homogeneously distributed on the porous matrix of the composite film. Water uptake and buffer uptake analysis revealed that the composite film could hold water and buffer sufficiently, which facilitated the absorption of exudate from the wound site. Amoxicillin was loaded in the prepared composite film and the maximum loading efficiency was found to be 67.33% with drug concentration of 300 ppm. In vitro studies showed greater antimicrobial activity of drug-loaded composite film compared to both pure film and standard antibiotic disc. Finally, the In vivo mouse model showed maximum healing efficiency compared to conventional gauge bandages because the loading of antibiotic in the film produced a synergistic effect and healing time was reduced.
基金supported by the National Natural Science Foundation of China, No. 81871493 (to YC)the Medical Science Advancement Program (Clinical Medicine) of Wuhan University, No. TFLC2018003 (to YC)
文摘Currently available commercial nerve guidance conduits have been applied in the repair of peripheral nerve defects.However,a conduit exhibiting good biocompatibility remains to be developed.In this work,a series of chitosan/graphene oxide(GO)films with concentrations of GO varying from 0-1 wt%(collectively referred to as CHGF-n)were prepared by an electrodeposition technique.The effects of CHGF-n on proliferation and adhesion abilities of Schwann cells were evaluated.The results showed that Schwann cells exhibited elongated spindle shapes and upregulated expression of nerve regeneration-related factors such as Krox20(a key myelination factor),Zeb2(essential for Schwann cell differentiation,myelination,and nerve repair),and transforming growth factorβ(a cytokine with regenerative functions).In addition,a nerve guidance conduit with a GO content of 0.25%(CHGFC-0.25)was implanted to repair a 10-mm sciatic nerve defect in rats.The results indicated improvements in sciatic functional index,electrophysiology,and sciatic nerve and gastrocnemius muscle histology compared with the CHGFC-0 group,and similar outcomes to the autograft group.In conclusion,we provide a candidate method for the repair of peripheral nerve defects using free-standing chitosan/GO nerve conduits produced by electrodeposition.
基金supported by the National Key R&D Program of China(Grant No.2020YFD0900905).
文摘Silver nanoparticles(Ag NPs)are an effective antibacterial agent,but their application in food packaging is limited due to their easy agglomeration and oxidation.In this study,antibacterial microcapsules were fabricated using Ginkgo biloba essential oil(GBEO)as core material and chitosan and type B gelatin biopolymer as capsule mate-rials.These antibacterial microcapsules were then modified with green-synthesized Ag NPs,blended into the bio-polymer polylactic acid(PLA),and finally formed as films.Physicochemical properties and antibacterial activity against Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)were evaluated.Results showed that the prepared antibacterial PLA films exhibited excellent antibacterial activity against foodborne pathogens.Its TVC exceeded the limit value of 7 log CFU/g at 7 days compared with the 5 days of pure PLA films.Therefore,these films can extend the shelf life of grass carp fillets by 2–3 days under refrigeration.
基金supported by the National Major Scientific and Technological Special Project for Significant New Drugs Development,No.2019ZX09301-147 (to LXZ)。
文摘There are various clinical treatments for traumatic brain injury,including surgery,drug therapy,and rehabilitation therapy;howeve r,the therapeutic effects are limited.Scaffolds combined with exosomes represent a promising but challenging method for improving the repair of traumatic brain injury.In this study,we determined the ability of a novel 3D-printed collagen/chitosan scaffold loaded with exosomes derived from neural stem cells pretreated with insulin-like growth factor-1(3D-CC-INEXOS) to improve traumatic brain injury repair and functional recove ry after traumatic brain injury in rats.Composite scaffolds comprising collagen,chitosan,and exosomes derived from neural stem cells pretreated with insulin-like growth fa ctor-1(INEXOS) continuously released exosomes for 2weeks.Transplantation of 3D-CC-INExos scaffolds significantly improved motor and cognitive functions in a rat traumatic brain injury model,as assessed by the Morris water maze test and modified neurological seve rity scores.In addition,immunofluorescence staining and transmission electron microscopy showed that3D-CC-INExos implantation significantly improved the recove ry of damaged nerve tissue in the injured area.In conclusion,this study suggests that transplanted3D-CC-INExos scaffolds might provide a potential strategy for the treatment of traumatic brain injury and lay a solid foundation for clinical translation.
文摘A new magnetic nanocomposite chitosan/EDTA/CeZnO(MEC-CeZnO)is synthesized as an efficient and eco-friendly bio-compound for the removal of chromium Cr(VI)metal ions and phenol organic matters from aqueous solutions.Nanocomposites are characterized using field emission scanning electron microscope,energy dispersive X-ray spectroscopy,transmission electron microscope,X-ray diffraction,X-ray photoelectron spectroscopy,Fourier transform infrared spectroscopy,diffuse reflection spectroscopy,and PL methods.The reduction rate of Cr(VI)ions and phenol degradation is evaluated under various experimental conditions,separately and simultaneously.The average pore diameter and specific surface of MEC-CeZnO nanocomposite are obtained 50 nm and 210 m^(2)·g^(-1)respectively,which suggest the successful synthesis of the nanocomposite because of the increased surface area and reduced pores in comparison to previous studies.Moreover,the best Cr(VI)and phenol reduction efficiencies are 98%and 92%at 180 min of retention time,both following the Langmuir-Hinshelwood first-order kinetics.The mechanisms of Cr(VI)and phenol removal from aqueous solutions involved Cr(VI)reduction,phenol oxidation,and adsorption.Examining the reusability of MEC-CeZnO showed that both degradation and recovery capacity is stable in 5 cycles.
基金supported by the Fund of Research and Extension(R&E)of Khulna University of Engineering&Technology in Bangladesh(Grant No.KUET 11).
文摘Excessive turbidity in water is aesthetically unappealing and severely malfunctions the photosynthesis process of aquatic ecosystems. This study aimed to evaluate the effectiveness of a nanocomposite adsorbent made of graphene oxide-keratin-chitosan for removing turbidity from tannery influent. The nanocomposite was fabricated with simple solution casting methods. Material dispersibility, bonding between composite materials (amide linkage), and the surface morphology of the nanocomposite were analyzed with the ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and scanning electron microscopy. At pH of 6, 2 g/L of adsorbent and a 25-min contact time resulted in about 88% of turbidity elimination. After the adsorption process, the total suspended solids, total dissolved solids, salinity, biochemical oxygen demand, and chemical oxygen demand of the tannery wastewater were reduced by 55%, 29%, 12%, 58%, and 75%, respectively. The optimum dosage of the nanocomposite with the maximum turbidity removal capacity was 12.62 mg/g. According the adsorption kinetic and isotherm models, the graphene oxide-keratin-chitosan nanocomposite played a key role in the turbidity removal process with chemisorption and electrostatic multilayer adsorption. This study provided methodological and mechanistic insights into the procedures of investigating the removal of turbidity from tannery wastewater with a novel composite material.
基金financially supported by the National Natural Science Foundation of China (No.21571110)the NSF of Zhejiang province,China (No.LY18B010003)the Ningbo Municipal Natural Science Foundation (No.2022J096)。
文摘Aqueous zinc batteries with low cost and inherent safety are considered to be the most promising energy storage devices.However,they suffer from poor cycling stability and low coulombic efficiencies caused by the adverse zinc dendrites on the anodes during the discharging/charging processes.Chitosan is a kind of natural amino polysaccharide,which is rich in nitrogen and carbon.When sintered at high temperatures,carbon membranes have been achieved with excellent conductivity and graphitization degree,which could enhance the ability to induce zinc ion uniform deposition to some extent.In this work,a type of carbon membrane using chitosan as raw materials has been fabricated by sintering,and then assembled as the protect layers in aqueous zinc batteries.The results show that the samples could retain smoother surfaces when adopting the sintering temperature of 800℃,and the assembled batteries are able to achieve about 700 h at a current density of 0.25m A·cm^(-2),which is far longer than those of the similar batteries without any carbon membranes.
文摘This work aims to prepare chitosan(CS)-based coated layers,CS(10 wt%nanosilver/90 wt%CS,10 wt%biotin/90 wt%CS,and 5 wt%nanosilver–5 wt%biotin)/90 wt%CS coatings are prepared,onto pure Ti substrate.The surface morphology of the novel CS composite coating was studied using field emission scanning electron microscopy,atomic force microscopy(AFM),Fourier transforms infrared(FTIR)and wettability test.Results show that the addition of(biotin,nanosilver)5 Vol.%improves the properties of composite materials.Using different particles’scale size aid in improving the combinations in the alginate,producing a dual effect on film properties.Coating surface roughness decreased in the chitosan-based biocomposite with preferable homogeneity and crack-free coating layers,as confirmed by AFM.An increase in surface roughness ensured substitution,which enhanced the surface structures.The high wettability of the CS-based coating layers was due to the presence of nanoparticles,and the composite coatings with CS,nanosilver,or biotin had excellent wettability because of the good hydrophilic nature of the CS matrix combined with reinforced particles.The FTIR results showed that peaks of the blending of CS plus nanoparticles,CS plus biotin,or CS plus nanosilver plus biotin were excellent matching with no changes in the structure of the matrix.
基金Funded by the National Natural Science Foundation of China(No.52071130)the Natural Science Foundation of Jiangsu Province(No.BK20211204)the Project of Outstanding Leading Talents in Gansu Province。
文摘Citric acid(CA)and chitosan(CS)were employed to modify magnesium oxychloride cement(MOC).Multiscale measurements were implemented to study the properties of the modified MOC pastes.Results show that the addition of CA/CS significantly changes the content of each phase and the microstructure of phase 5.The single addition of CA can effectively increase the compressive strength of MOC after 7 d curing,while CS exerts no obvious effect on the compressive strength.As to the simultaneous addition of CA and CS,the compressive strength of MOC gradually decreases with the increasing content of CS.Interestingly,mixing CA and CS significantly enhances the water resistance of MOC and decreases the degradation rate of MOC in phosphate buffered solution,which can be ascribed to the low specific surface area of the plate-like crystals in the modified MOC and the reduction of pores in the structure.
基金supported by a National Research Foundation of Korea grant provided by the Korean government(NRF-2021R1A2C4002746 and 2017R1A5A2015541)This research was supported by"Regional Innovation Strategy(RIS)"through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(MOE)(2021RIS-001)Finally,this work was supported by a funding for the academic research program of Chungbuk National University in 2022.
文摘Corrugated surface microparticles comprising levofloxacin(LEV),chitosan and organic acid were prepared using the 3-combo spray drying method.The amount and the boiling point of the organic acid affected the degree of roughness.In this study,we tried to improve the aerodynamic performance and increase aerosolization by corrugated surface microparticle for lung drug delivery efficiency as dry powder inhaler.HMP175 L20 prepared with 175 mmol propionic acid solution was corrugated more than HMF175 L20 prepared with 175 mmol formic acid solution.The ACI and PIV results showed a significant increase in aerodynamic performance of corrugated microparticles.The FPF value of HMP175 L20 was 41.3%±3.9%compared with 25.6%±7.7%of HMF175 L20.Corrugated microparticles also showed better aerosolization,decreased x-axial velocity,and variable angle.Rapid dissolution of drug formulationswas observed in vivo.Lowdoses administered to the lungs achieved higher LEV concentrations in the lung fluid than high doses administered orally.Surface modification in the polymer-based formulation was achieved by controlling the evaporation rate and improving the inhalation efficiency of DPIs.
文摘In the process of exploration and development of oil and gas fields, the acidic environment of oil reservoir, production and transport processes cause corrosion of pipelines and equipment, resulting in huge economic losses and production safety risks. Corrosion inhibitors were widely used in oil industry because of simple operation process and economical. In this study, three environmentally friendly corrosion inhibitors were synthesized based on the natural polysaccharide chitosan. Corrosion inhibition of three dendritic chitosan derivatives (We name them BH, CH and DH) on mild steel in 1 mol/L HCl solution with natural ventilation system was evaluated by weight loss experiment, electrochemical analysis and surface morphology characterization. The experimental results showed that when the three dendritic chitosan derivatives added in the corrosive medium were 500 mg L^(−1), the corrosion inhibition efficiencies were all more than 80%. Based on quantum chemical calculation, inhibition mechanisms of three dendritic chitosan derivatives were investigated according to molecular structures. The results showed that the benzene ring, Schiff base and N atom contained in the molecule were the active centers of electron exchange, which were more likely to form a film on the carbon steel surface, thereby slowing or inhibiting corrosion. The results also predicted the corrosion inhibition effect BH > DH > CH, which was consistent with the experimental conclusion.
基金The authors acknowledge the funding support from the National Natural Science Foundation of China(Nos.52175474 and 51775324)the China Scholarship Council(No.202006890054).
文摘Three-dimensional printing technologies exhibit tremendous potential in the advancing fields of tissue engineering and regenerative medicine due to the precise spatial control over depositing the biomaterial.Despite their widespread utilization and numerous advantages,the development of suitable novel biomaterials for extrusion-based 3D printing of scaffolds that support cell attachment,proliferation,and vascularization remains a challenge.Multi-material composite hydrogels present incredible potential in this field.Thus,in this work,a multi-material composite hydrogel with a promising formulation of chitosan/gelatin functionalized with egg white was developed,which provides good printability and shape fidelity.In addition,a series of comparative analyses of different crosslinking agents and processes based on tripolyphosphate(TPP),genipin(GP),and glutaraldehyde(GTA)were investigated and compared to select the ideal crosslinking strategy to enhance the physicochemical and biological properties of the fabricated scaffolds.All of the results indicate that the composite hydrogel and the resulting scaffolds utilizing TPP crosslinking have great potential in tissue engineering,especially for supporting neo-vessel growth into the scaffold and promoting angiogenesis within engineered tissues.
基金supported by the National Key Research and Development Project (Grant No. 2018YFE0124800)the National Key Research Program of China (Grant No.2022YFA1503100)+7 种基金Science and Technology Project of Jiangsu Province (Grant No. BZ2020011)National Natural Science Foundation of China (Grants No. 22173067)the Science and Technology Development FundMacao SAR(FDCT No. 0052/2021/A)Collaborative Innovation Center of Suzhou Nano Science&Technologythe Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)the 111 ProjectJoint International Research Laboratory of Carbon-Based Functional Materials and Devices
文摘Lithium-sulfur(Li-S) batteries can provide far higher energy density than currently commercialized lithium ion batteries, but challenges remain before it they are used in practice.One of the challenges is the shuttle effect that originates from soluble intermediates, like lithium polysulfides. To address this issue, we report a novel laminar composite, N,O-carboxymethyl chitosan-reduced graphene oxide(CC-rGO), which is manufactured via the self-assembly of CC onto GO and subsequent reduction of GO under an extreme condition of 1 Pa and-50°C. The synthesized laminar CC-rGO composite is mixed with acetylene black(AB) and coated on a commercial polypropylene(PP) membrane, resulting in a separator(CC-rGO/AB/PP) that can not only completely suppress the polysulfides penetration, but also can accelerate the lithium ion transportation, providing a Li-S battery with excellent cyclic stability and rate capability. As confirmed by theoretic simulations, this unique feature of CC-rGO is attributed to its strong repulsive interaction to polysulfide anions and its benefit for fast lithium ion transportation through the paths paved by the heteroatoms in CC.
基金supported by the National Natural Science Foundation of China(No.22075262)。
文摘The electrochemical performances of cathode play a key role in the marine sediment microbial fuel cells(MSMFCs)as a long lasting power source to drive instruments,especially when the dissolved oxygen concentration is very low in seawater.A CTS-Fe^(3+)modified cathode is prepared here by grafting chitosan(CTS)on a carbon fiber surface and then chelating Fe^(3+)through the coordination process.The electrochemical performance in seawater and the output power of the assembled MSMFCs are both studied.The results show that the exchange current densities of CTS and the CTS-Fe^(3+)group are 5.5 and 6.2 times higher than that of the blank group,respectively.The potential of the CTS-Fe^(3+)modified cathode increases by 138 mV.The output power of the fuel cell(613.0 mW m^(-2))assembled with CTS-Fe^(3+)is 54 times larger than that of the blank group(11.4 mW m^(-2))and the current output corresponding with the maximum power output also increases by 56 times.Due to the valence conversion between Fe^(3+)and Fe^(2+)on the modified cathode,the kinetic activity of the dissolved oxygen reduction is accelerated and the depolarization capability of the cathode is enhanced,resulting higher cell power.On the basis of this study,the new cathode materials will be encouraged to design with the complex of iron ion in natural seawater as the catalysis for oxygen reduction to improve the cell power in deep sea.
