The aim of the present work was to show the sustainability of fibrin sealant in releasing dexamethasone and adjust the protocol for clinical application of the novel method in the treatment of Meniere’s disease (MD) ...The aim of the present work was to show the sustainability of fibrin sealant in releasing dexamethasone and adjust the protocol for clinical application of the novel method in the treatment of Meniere’s disease (MD) and sudden sensorineural hearing loss (SSHL).Gelation occurred shortly after mixing dexamethasone-containing fibrinogen with thrombin.Dexamethasone was constantly released for at least 16 d at a stable level after 7d in protocol 1 (low-dose),while it was robustly released within 4 d and slowed afterward until 10 d in protocol 2(high-dose).There were significant differences among the time points in Protocol 2 (p<0.01,ANOVA),and the exponential model with the formula y=15.299*e~(-0.483*t) fits the association.The estimated concentration of dexamethasone released on 7 d in protocol 2 was slightly lower than that observed in protocol 1.The fibrin sealant is capable of constantly releasing dexamethasone with adjustable dynamics.Targeted and minimally invasive administration of the material can be achieved in the clinic by sequential injections of the fluids using a soft-tipped catheter.展开更多
Reducing ammonia(NH3) and nitrous oxide(N2O) emissions have great effects on mitigating nitrogen(N) nutrient loss and greenhouse gas emissions. Controlled release urea(CRU) can control the N release rate, which reduce...Reducing ammonia(NH3) and nitrous oxide(N2O) emissions have great effects on mitigating nitrogen(N) nutrient loss and greenhouse gas emissions. Controlled release urea(CRU) can control the N release rate, which reduces reactive N loss and increases nitrogen use efficiency relative to conventional urea(CU). However, the crucial factors influencing the responses of NH3and N2O emissions to CRU relative to CU are still unclear. In this study, we evaluated the responses of NH3and N2O emissions to CRU based on collected field data with a meta-analysis. CRU reduced the NH3and N2O emissions by 32.7 and 25.0% compared with CU, respectively. According to subgroup analysis, CRU presented better mitigation of NH3and N2O emissions in soils with pH 6.5–7.5(–47.9 and –23.7%) relative to either pH<6.5(–28.5and –21.4%) or pH>7.5(–29.3 and –17.3%), and in the rice season(–34.8 and –29.1%) relative to the wheat season(–19.8 and –22.8%). The responses of NH3and N2O emissions to CRU increased from rainfed(–30.5 and –17.0%) to irrigated(–32.5 and –22.9%), and then to paddy(–34.8 and –29.1%) systems. In addition, the response of N2O emission mitigation increased with increases in soil total nitrogen(TN);however, soil TN did not significantly affect the response of NH3volatilization. The reduction in NH3emission was greater in sandy-textured soil(–57.7%) relative to loam-textured(–32.9%) and clay-textured(–32.3%) soils, whereas soil texture did not affect N2O emission. Overall, CRU was a good option for reducing the NH3and N2O emissions relative to CU in agricultural production. This analysis improves our understanding of the crucial environmental and management factors influencing the mitigation of NH3and N2O emissions under CRU application, and these site-specific factors should be considered when applying CRU to reduce reactive N loss and increase NUE.展开更多
The traditional soil-based rice seedling production methods for mechanical transplanting are resource-intensive,time consuming and laborious.The improvement and optimization of nutrient management in soil-less nursery...The traditional soil-based rice seedling production methods for mechanical transplanting are resource-intensive,time consuming and laborious.The improvement and optimization of nutrient management in soil-less nursery raising methods like tandem long-mat seedlings(TLMS)are necessary for the resource-efficient cultivation of rice.In the present study,a controlled-release fertilizer(CRF)-polymer-coated compound fertilizer with 3 months release period(PCCF-3M)was applied as seedling fertilizer(SF),and five different dosages of SF(SF-0,SF-10,SF-20,SF-30,and SF-40)were compared with an organic substrate as the control(CK).Among all SF treatments,the best results were obtained with the application of 20 g/tray of SF(SF-20),as the seedling quality and machine transplanting quality were comparable to those of CK.In contrast,the lower dosages(SF-0 and SF-10)resulted in low nitrogen content and reduced shoot growth,while the higher dosages(SF-30 and SF-40)resulted in toxicity(increased malondialdehyde accumulation)and inhibited the root growth.Similarly,SF-20 increased panicle number(5.6-7.0%)and yield(4.3-5.3%)compared with CK,which might be related to the remaining SF entangled in the roots supporting the tiller growth of rice seedlings in the field.Moreover,SF-20 reduced the seedling block weight(53.1%)and cost of seedling production(23.5%)but increased the gross margin,indicating that it was easy to handle and economical.Taken together,our results indicate that SF-20 is a cost-effective way to promote the growth and transplanting efficiency of rice seedlings.To our knowledge,this study is the first to determine the optimum dosage of CRF for the soil-less production of rice seedlings.展开更多
[Objectives]To study the effects of different proportions of controlled release urea and ordinary urea on peanut yield.[Methods]A total of 5 treatments were set up according to different proportions of controlled rele...[Objectives]To study the effects of different proportions of controlled release urea and ordinary urea on peanut yield.[Methods]A total of 5 treatments were set up according to different proportions of controlled release urea and ordinary urea,randomly arranged in blocks and repeated 3 times.[Results]The test results of field districts showed that different proportions of controlled release urea and conventional urea had different effects on peanut yield.On the basis of applying 50 kg/666.7 m^(2)of calcium superphosphate and 17 kg/666.7 m^(2)of potassium sulfate,13.34 kg/666.7 m^(2)of pure nitrogen was applied.The optimal ratio of controlled release urea to ordinary urea was 75:25,followed by 50:50.The output was 379.83 and 371.83 kg/666.7 m^(2),separately increased by 6.74%and 4.50%compared to the application of ordinary urea.[Conclusions]The combined application of controlled release urea and ordinary urea in peanuts can significantly increase peanut yield compared to just applying ordinary urea.展开更多
Hydrogels are soft materials consisting of a three-dimensional network of polymer chains.Over the years,hydrogels with different compositions have been developed as drug carriers for diverse biomedical applications,ra...Hydrogels are soft materials consisting of a three-dimensional network of polymer chains.Over the years,hydrogels with different compositions have been developed as drug carriers for diverse biomedical applications,ranging from cancer therapy and wound care to the treatment of neurodegenerative and inflammatory diseases.Most of these carriers,however,are designed only to deliver single agents.Carriers based on hydrogels for co-delivery of multiple agents,with the release rate of each of the co-delivered agents tunable,are lacking.This study reports a one-pot method of fabricating alginate-based complex fibers with the Janus morphology,with carboxymethyl cellulose sodium functioning as a polymeric modifier of the properties of each of the fiber compartments.By using malachite green and minocycline hydrochloride as model drugs,the generated fibers demonstrate the capacity of enabling the release profile of each of the co-delivered drugs to be precisely controlled.Along with their negligible toxicity and the retention of the activity of the loaded drugs,the complex fibers reported in this study warrant further development and optimization for applications that involve co-delivery of multiple agents.展开更多
Slow release fertilizers are designed to enhance crop yield and minimizing the loss of nitrogen(N)to environment.However,N release in leaching and loss in ammonia emission from bag controlled release fertilizers have ...Slow release fertilizers are designed to enhance crop yield and minimizing the loss of nitrogen(N)to environment.However,N release in leaching and loss in ammonia emission from bag controlled release fertilizers have not been previously evaluated under the standardized conditions in soil.Accordingly,a laboratory study was conducted to evaluate the characteristics of N release from a bag controlled fertilizer with 1,3,5 and 7 rows of hole(B-1,B-3,B-5,B-7)and a kraft bag without hole(B-W).The results showed that the amount of N leaching of B-1,B-3,B-5,B-7 and B-W were significantly lower than urea fertilizer without bag(U).The maximum N release from the fertilizers followed the order:U(83.16%)>B-7(54.61%)>B-5(54.02%)>B-W(51.51%)>B-3(48.87%)>B-1(38.60%)during the experimentation.Compared with U treatment,ammonia volatilization losses were significantly decreased by B-1,B-3,B-5,B-7 and B-W treatments.Based on N release and loss,a suitable bag with holes should be considered in practice when using the bag controlled fertilizer to meet an environment good objective.The evaluation method merits further study combined with field experiment.展开更多
Encapsulation and controlled release of active agents is a common practice to improve processing and properties of materials and final products in different industries. Today, a large variety of chemical admixtures ar...Encapsulation and controlled release of active agents is a common practice to improve processing and properties of materials and final products in different industries. Today, a large variety of chemical admixtures are used in construction materials, the performance of which could be improved by a better dosage control. This work presents investigations on the controlled release of encapsulated construction chemicals for future applications in construction materials. The high shear mixing technology was used to produce matrix based encapsulations by agglomeration applied to commercially available construction materials. The agglomeration process was varied by the use of different agitator types, the variation of the agitator speed and the application of additional coating materials. The particle size distribution as well as the particle shape of the produced agglomerates was analyzed by automatic image evolution and scanning electron microscopy. The release behavior of the capsules in aqueous solutions was investigated by UV spectroscopy. The obtained results confirmed a theoretical model for the encapsulation and release of admixtures, which was derived from pharmaceutical drug release concepts and adapted to construction materials. The results indicate that the matrix based encapsulation is a promising technique for future applications in the field of construction materials.展开更多
Glutathione-responsive carboxymethyl chitosan nanoparticles cross-linked with disulfide bonds were developed for controlled release of herbicides. The nanoparticles were synthesized by selfassembly of amphiphilic carb...Glutathione-responsive carboxymethyl chitosan nanoparticles cross-linked with disulfide bonds were developed for controlled release of herbicides. The nanoparticles were synthesized by selfassembly of amphiphilic carboxymethyl chitosan derivative (CMCS-MUA) in aqueous solution and subsequently producing disulfide cross-linking bonds by ultrasonic treatment. TEM showed that the nanoparticles had a spherical core-shell configuration with a size of about 250 nm. Assessment of stability of the nanoparticles (considering mean diameter, polydispersity, and Zeta potential) was conducted over a period of three months, and the nanoparticles were found to be stable in solution. Herbicide-loaded nanoparticles were prepared using diuron as a model herbicide. In vitro release study revealed that diuron can be released from nanoparticles in a controlled manner depended on the glutathione concentration. Herbicidal activity assays performed with preemergence treatment of target species (Echinochloa crusgalli) showed the effectiveness of diuron- loaded nanoparticles. Assays with nontarget species (Zea mays) showed that the diuronloaded nanoparticles did not affect plant growth. The results indicate that the glutathioneresponsive nanoparticles prepared in this work will be a promising candidate for controlled release of herbicides in agriculture.展开更多
This study aimed to develop controlled release formulation of Thiabendazole for reduced contaminations to soil water and agricultural produces. The idea behind this work was based on changing the ionization status of ...This study aimed to develop controlled release formulation of Thiabendazole for reduced contaminations to soil water and agricultural produces. The idea behind this work was based on changing the ionization status of Thiabendazole molecule throughout pH changes to become a cation then adsorbing it to bentonite clay surfaces. Equilibrium concentrations of Thiabendazole in the adsorption solutions were determined by HPLC. Results showed that Thiabendazole was better adsorbed in clay at the lowest pH value (pH 3). Furthermore, raising the temperature of the adsorption reaction increased the adsorbed amount of Thiabendazole. Release experiments showed that Thiabendazole is extremely slower at pH 3 than at pH 5.5 or pH 9. These promising results suggest that application of Thiabendazole clay based formulation may reduce the applied rate and that the released fraction consequently may reduce the environmental contamination. It is also advantageous to use these formulations in the acidic soil for plant disease control.展开更多
The goal of the present study is to utilize cis-diamminedichloroplatinum (cisplatin) loaded polymer nanoparticles (NPs) to give a controlled, extended, and local drug therapy for the treatment of cancer. We have used ...The goal of the present study is to utilize cis-diamminedichloroplatinum (cisplatin) loaded polymer nanoparticles (NPs) to give a controlled, extended, and local drug therapy for the treatment of cancer. We have used biodegradable and biocompatible poly(lactic-co-glycolic acid) (PLGA) to prepare the NPs by adjusting the double emulsion technique using poly(vinylalcohol) as a surface active agent. The PLGA NPs were characterized for particle size and shape, controlled release of cisplatin, and degradation. Cisplatin solubility in deionized water was increased up to 4 mg/mL by simply changing the solution parameters. Cisplatin encapsulated NPs were incubated in phosphate buffered saline (PBS) at 37?C to study the release kinetics of cisplatin. Cisplatin was released in a sustained manner with less than 20% release during a 3-day period followed by 50% release during a 21-day period. A degradation study of PLGA NPs demonstrated the loss of spherical shape during a 21-day period. We also examined the cisplatin sensitive A2780 cell apoptosis when cells were incubated with cisplatin encapsulated PLGA NPs. A large number of cell apoptosis occurred as a result of cisplatin release from the PLGA NPs. These results suggest that cisplatin encapsulated PLGA NPs can be used to treat the cancer cells by injecting them into a localized site minimizing the side effects.展开更多
Two phenoxyherbicide nanocomposites, namely cloprop-layered double hydroxide and cloprop-zinc- layered hydroxide nanocomposites, have been synthesized by using co-precipitation and direct reaction method. PXRD pattern...Two phenoxyherbicide nanocomposites, namely cloprop-layered double hydroxide and cloprop-zinc- layered hydroxide nanocomposites, have been synthesized by using co-precipitation and direct reaction method. PXRD pattern showed an expansion of interlayer spacing with the value of 21.0 Åand 22.7 Åfor cloprop-layered double hydroxide and cloprop-zinc-layered hydroxide nanocomposite, respectively. It is evident from FTIR and elemental analyses that both nanocomposites were successfully intercalated between the interlayers of layered metal hydroxide. Controlled release of cloprop anion from interlayer of nanocomposites for both cloprop-layered double hydroxide and cloprop-zinc-layered hydroxide nanocomposite into phosphate solution was rapid initially and slow thereafter. The percentage of accumulated release of cloprop anion from cloprop-zinc-layered hydroxide nanocomposite was slightly higher than that from cloprop-layered double hydroxide nanocomposite. Kinetic behavior of cloprop release was governed by pseudo-second-order for cloprop-layered double hydroxide nanocomposite while parabolic diffusion for cloprop-zinc-layered hydroxide nanocomposite. Results from this study highlight the potential of both nanocomposites as capsulated material for controlled release of cloprop phenoxyherbicides anion.展开更多
Field trials on a silt-loamy paddy soil derived from shallow-sea deposit in direct seeding rice fields were conducted in Zhejiang, China, in 1996 to compare N efficiency of controlled release fertilizers (LP fertilize...Field trials on a silt-loamy paddy soil derived from shallow-sea deposit in direct seeding rice fields were conducted in Zhejiang, China, in 1996 to compare N efficiency of controlled release fertilizers (LP fertilizers) with the conventional urea. Six treatments including CK (no N fertilizer), conventional urea and different types of LP fertilizers at different rates were designed for two succeeding crops of early and late rice. A blend of different types of LP fertilizers as a single preplant "co-situs" application released N in a rate and amount synchronizing with uptake pattern of direct seeding rice. A single preplant application of the LP fertilizers could meet the N requirement of rice for the whole growth period without need of topdressing. Using LP fertilizer blends, equivalent grain yields could be maintained even if the N fertilization rates were reduced by 25%～50% compared with the conventional urea. Agronomic efficiency of the LP fertilizers was 13.6%～ 86.4% higher than that of the conventional urea in early rice and 100%～164.1% in late rice, depending on the amounts of the LP fertilizers applied. N fertilizer recovery rate increased from 27.4% for the conventional application of urea to 41.7%～54.l% for the single preplant "co-situs" application of the LP fertilizers. Use of the LP fertilizers was promising if the increase in production costs due to the high LP fertilizer prices could be compensated by increase in yield and N efficiency, reduction in labor costs and improvement in environment.展开更多
This study examined the release characteristics of different N forms in an uncoated slow/controlled-release compound fertilizer (UCRF) and the N uptake and N-use efficiency by rice plants. Water dissolution, soil leac...This study examined the release characteristics of different N forms in an uncoated slow/controlled-release compound fertilizer (UCRF) and the N uptake and N-use efficiency by rice plants. Water dissolution, soil leaching, and pot experiments were employed. The dynamics of N release from the UCRF could be quantitatively described by three equations: the first-order kinetics equation [Nt = N0 (1-e-kt)], Elovich equation (Nt = a + blnt), and parabola equation (Nt = a + bt0.5), with the best fitting by the first-order kinetics equation for different N (r = 0.9569** - 0.9999**). The release potentials (N0 values estimated by the first-order kinetics equation) of different N in the UCRF decreased in the order of total N > DON > urea-N > NH4+-N > NO3--N in water, and total N > NH4+-N > DON > urea-N > NO3--N in soil, respectively, being in accordance with cumulative amounts of N release. The constants of N release rate (k values and b values) for different N forms were in decreasing order of total N > DON > NH4+-N > NO3--N in water, whereas the k values were urea- N >DON > NH4+-N > total N > NO3--N, and the b values were total N > NH4+-N > DON > NO3--N > urea-N in soil. Compared with a common compound fertilizer, the N-use efficiency, N-agronomy efficiency, and N-physiological efficiency of the UCRF were increased by 11.4%, 8.32 kg kg-1, and 5.17 kg kg-1, respectively. The ratios of different N to total N in the UCRF showed significant correlation with N uptake by rice plants. The findings showed that the first-order kinetics equation [Nt = N0 (1-e-kt)] could be used to describe the release characteristics of different N forms in the fertilizer. The UCRF containing different N forms was more effective in facilitating N uptake by rice compared with the common compound fertilizer containing single urea-N form.展开更多
There is limited information about the influence of slow or controlled release fertilizer(S/CRF) on rice yield and quality. In this study, japonica rice cultivar Nanjing 9108 was used to study the effects of three dif...There is limited information about the influence of slow or controlled release fertilizer(S/CRF) on rice yield and quality. In this study, japonica rice cultivar Nanjing 9108 was used to study the effects of three different S/CRFs(polymer-coated urea(PCU), sulfur-coated urea(SCU), and urea formaldehyde(UF)) and two fertilization modes(both S/CRF and common urea(CU) as basal fertilizer, S/CRF as basal and CU as tillering fertilizer) on rice yield and quality. CU only was applied separately as control(CK). Results showed that, rice grain yield, chalky kernel rate, chalky area, overall chalkiness, and the content of gliadin, glutenin, and protein, all showed the trends of UF>PCU>SCU within the same fertilization mode, and showed the trends of S/CRF as basal and CU as tillering fertilizer>both S/CRF and CU as basal fertilizer within the same type of S/CRF. In contrast, the contents of amylose, amylopectin, and starch, as well as taste value, and peak and hot viscosity showed trends of SCU>PCU>UF, and the trends of both S/CRF and CU as basal fertilizer>S/CRF as basal and CU as tillering fertilizer. Among S/CRF treatments and fertilization modes, taste values of cooked rice were positively correlated with amylose, amylopectin, and starch contents, as well as gel consistency, peak viscosity, hot viscosity, and cool viscosity, while negatively correlated with globulin, gliadin, glutenin, and protein contents. The types of S/CRF and fertilization modes are important for improving rice yield and quality. Compared to CK, higher yield and similar quality of rice was achieved with UF as basal and CU as tillering fertilizer, and similar yield with improved appearance and eating and cooking quality of rice was achieved with either both UF and CU as basal fertilizer, or PCU as basal and CU as tillering fertilizer.展开更多
Polymethylmethacrylate (PMMA) coated microcapsules of diclofenac sodium (DFS) were prepared by a modified wa-ter-in-oil-in-water (W1/O/W2) emulsion solvent evaporation method using sodium alginate (SAL) as a matrix ma...Polymethylmethacrylate (PMMA) coated microcapsules of diclofenac sodium (DFS) were prepared by a modified wa-ter-in-oil-in-water (W1/O/W2) emulsion solvent evaporation method using sodium alginate (SAL) as a matrix material in the internal aqueous phase (W1).Their performance with respect to controlled release of the drug in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) were evaluated, and compared with non-matrix microcapsules prepared by the conventional W1/O/W2 emulsion solvent evaporation method. Scanning electron micrographs (SEM) revealed that all the microcapsules were discrete and spherical in shape;however, the surface porosity of the matrix microcap-sules appeared to be less than that of the non-matrix microcapsules. In case of non-matrix microcapsules, an increase in the volume of water in W1 phase resulted in decrease in the drug entrapment efficiency (DEE) along with increase in release of the drug in both SGF and SIF. While in case of matrix microcapsules increase in the amount of SAL in W1 phase and concentration of the coating polymer in organic phase led to increase in DEE of the matrix microcapsules and considerable decrease in the drug release in both SGF and SIF. No interaction between the drug and any of the polymers used to prepare microcapsules was evident from Fourier transform infra-red (FTIR) analysis. The matrix microcapsules prepared using higher concentration of SAL and PMMA released the drug following zero order or Case-II transport model. The matrix microcapsules appeared to be suitable for releasing lesser amounts of DFS in SGF and providing extended release in SIF.展开更多
Controlled release fertilizers (CRF) are produced with different rates and durations of nutrient release to cater to different crops with wide ranges of nutrient requirements. A rapid technique is needed to verify the...Controlled release fertilizers (CRF) are produced with different rates and durations of nutrient release to cater to different crops with wide ranges of nutrient requirements. A rapid technique is needed to verify the label specifications of nutrient release rate and duration. Polymer-coated urea (PCU) (43% nitrogen [N]) and polymer-coated N, phosphorus (P), potassium (K) (PC_NPK;14-14-14) fertilizer products were used in this study. Soil incubation of the above CRF products at 25℃ showed that 63.6% to 70.8% of total N was released over 220 days (d). At 100℃ in water 100% of N release occurred in about 168 to 216 hours (h). Regression equations were developed for cumulative nutrient release as a function of release time separately at 25℃ and 100℃. Using the above regressions, the release duration for a given percent nutrient release at each temperature was calculated. These values were then used to establish a relationship between the release duration at 25℃ as a function of that at 100℃. This relationship is useful to predict the release duration at 25℃ of an unknown CRF product by conducting a rapid release test in water at 100℃. This study demonstrated that a rapid nutrient release test at 100℃ successfully predicted nutrient release rate and duration at 25℃, for polymer coated fertilizers. Therefore, this rapid test can be used to verify the label release rate and duration of most CRF products.展开更多
Polyurethane coated urea slow/controlled release fertilizer was prepared based on urea granules, isocyanate, polyols and paraffin. Isocyanate reacted with polyols to synthesize the polyurethane skin layer on urea gran...Polyurethane coated urea slow/controlled release fertilizer was prepared based on urea granules, isocyanate, polyols and paraffin. Isocyanate reacted with polyols to synthesize the polyurethane skin layer on urea granules surface. Paraffin serves as a lubricant during syntheses of polyurethane skin layers. The structure and nutrient release characteristics of the polyurethane skin layers were investigated by FTIR, SEM and TG. Urea nitrogen slow-release behavior of the polyurethane coated urea was tested. The experimental results indicated that compact and dense polyurethane skin layers with a thickness of 10-15 μm were formed on urea surface, the urea nitrogen slow-release time can reach 40-50 days. Paraffin proves to play a key role in inhibiting water to penetrate into urea, but excessive addition would decrease the polyurethane crosslinking density.展开更多
A controlled release N fertilizer was developed by the carrier method using natural polysaccharides (PS)and urea. The results showed that mixing of PS and urea led to significant control of urea release. When a cross-...A controlled release N fertilizer was developed by the carrier method using natural polysaccharides (PS)and urea. The results showed that mixing of PS and urea led to significant control of urea release. When a cross-linker (boric acid or glutaraldehyde) was added, a better control effect was observed. During a 30 min leaching time the nitrogen release rate from the controlled release fertilizer was nearly constant, which was significantly different from normal urea. One of the controlled release mechanisms was related to space resistance from a large molecular structure. Infrared (IR) analysis indicated that interaction of PS with urea was through a hydrogen bond or a covalent bond. These bonds created an α-helix or high molecular network fertilizer carrier system, which was another reason for a controlled nutrient release. Pot experiment showed that nitrogen use efficiency could increase significantly with a carrier fertilizer.展开更多
Lignin is the main by-product of pulp and papermaking and is not effectively utilized. Conversion of industrial lignins into value-added materials is beneficial for the effective utilization of resources as well as fo...Lignin is the main by-product of pulp and papermaking and is not effectively utilized. Conversion of industrial lignins into value-added materials is beneficial for the effective utilization of resources as well as for environmental protection. Because of their adsorptivity, slow-release property,biocompatibility, and biodegradability, lignin and its derivatives find potential applications as eco-friendly slow/controlled release materials in agricultural fields. This report reviews the recent research advances in lignin-based slow/controlled release fertilizers and pesticides.展开更多
基金supported by the National Natural Science Foundation of China(81771006)。
文摘The aim of the present work was to show the sustainability of fibrin sealant in releasing dexamethasone and adjust the protocol for clinical application of the novel method in the treatment of Meniere’s disease (MD) and sudden sensorineural hearing loss (SSHL).Gelation occurred shortly after mixing dexamethasone-containing fibrinogen with thrombin.Dexamethasone was constantly released for at least 16 d at a stable level after 7d in protocol 1 (low-dose),while it was robustly released within 4 d and slowed afterward until 10 d in protocol 2(high-dose).There were significant differences among the time points in Protocol 2 (p<0.01,ANOVA),and the exponential model with the formula y=15.299*e~(-0.483*t) fits the association.The estimated concentration of dexamethasone released on 7 d in protocol 2 was slightly lower than that observed in protocol 1.The fibrin sealant is capable of constantly releasing dexamethasone with adjustable dynamics.Targeted and minimally invasive administration of the material can be achieved in the clinic by sequential injections of the fluids using a soft-tipped catheter.
基金financially supported by the Smart Fertilization Project (05)the National Key Research & Development Program of China (2022YFD1700605)。
文摘Reducing ammonia(NH3) and nitrous oxide(N2O) emissions have great effects on mitigating nitrogen(N) nutrient loss and greenhouse gas emissions. Controlled release urea(CRU) can control the N release rate, which reduces reactive N loss and increases nitrogen use efficiency relative to conventional urea(CU). However, the crucial factors influencing the responses of NH3and N2O emissions to CRU relative to CU are still unclear. In this study, we evaluated the responses of NH3and N2O emissions to CRU based on collected field data with a meta-analysis. CRU reduced the NH3and N2O emissions by 32.7 and 25.0% compared with CU, respectively. According to subgroup analysis, CRU presented better mitigation of NH3and N2O emissions in soils with pH 6.5–7.5(–47.9 and –23.7%) relative to either pH<6.5(–28.5and –21.4%) or pH>7.5(–29.3 and –17.3%), and in the rice season(–34.8 and –29.1%) relative to the wheat season(–19.8 and –22.8%). The responses of NH3and N2O emissions to CRU increased from rainfed(–30.5 and –17.0%) to irrigated(–32.5 and –22.9%), and then to paddy(–34.8 and –29.1%) systems. In addition, the response of N2O emission mitigation increased with increases in soil total nitrogen(TN);however, soil TN did not significantly affect the response of NH3volatilization. The reduction in NH3emission was greater in sandy-textured soil(–57.7%) relative to loam-textured(–32.9%) and clay-textured(–32.3%) soils, whereas soil texture did not affect N2O emission. Overall, CRU was a good option for reducing the NH3and N2O emissions relative to CU in agricultural production. This analysis improves our understanding of the crucial environmental and management factors influencing the mitigation of NH3and N2O emissions under CRU application, and these site-specific factors should be considered when applying CRU to reduce reactive N loss and increase NUE.
基金This work was funded by the National Natural Science Foundation of China(31871573)the Key Research and Development Program of Jiangsu Province,China(BE2017369)the Jiangsu Agriculture Science and Technology Innovation Fund,China(JASTIF)(CX(18)1002).
文摘The traditional soil-based rice seedling production methods for mechanical transplanting are resource-intensive,time consuming and laborious.The improvement and optimization of nutrient management in soil-less nursery raising methods like tandem long-mat seedlings(TLMS)are necessary for the resource-efficient cultivation of rice.In the present study,a controlled-release fertilizer(CRF)-polymer-coated compound fertilizer with 3 months release period(PCCF-3M)was applied as seedling fertilizer(SF),and five different dosages of SF(SF-0,SF-10,SF-20,SF-30,and SF-40)were compared with an organic substrate as the control(CK).Among all SF treatments,the best results were obtained with the application of 20 g/tray of SF(SF-20),as the seedling quality and machine transplanting quality were comparable to those of CK.In contrast,the lower dosages(SF-0 and SF-10)resulted in low nitrogen content and reduced shoot growth,while the higher dosages(SF-30 and SF-40)resulted in toxicity(increased malondialdehyde accumulation)and inhibited the root growth.Similarly,SF-20 increased panicle number(5.6-7.0%)and yield(4.3-5.3%)compared with CK,which might be related to the remaining SF entangled in the roots supporting the tiller growth of rice seedlings in the field.Moreover,SF-20 reduced the seedling block weight(53.1%)and cost of seedling production(23.5%)but increased the gross margin,indicating that it was easy to handle and economical.Taken together,our results indicate that SF-20 is a cost-effective way to promote the growth and transplanting efficiency of rice seedlings.To our knowledge,this study is the first to determine the optimum dosage of CRF for the soil-less production of rice seedlings.
基金Peanut Innovation Team Project of Shandong Province Modern Agricultural Industry Technology System(SDAIT-05-022)Special Fund Project of Shandong Province Agricultural Technology Promotion(SDTG-2016-08).
文摘[Objectives]To study the effects of different proportions of controlled release urea and ordinary urea on peanut yield.[Methods]A total of 5 treatments were set up according to different proportions of controlled release urea and ordinary urea,randomly arranged in blocks and repeated 3 times.[Results]The test results of field districts showed that different proportions of controlled release urea and conventional urea had different effects on peanut yield.On the basis of applying 50 kg/666.7 m^(2)of calcium superphosphate and 17 kg/666.7 m^(2)of potassium sulfate,13.34 kg/666.7 m^(2)of pure nitrogen was applied.The optimal ratio of controlled release urea to ordinary urea was 75:25,followed by 50:50.The output was 379.83 and 371.83 kg/666.7 m^(2),separately increased by 6.74%and 4.50%compared to the application of ordinary urea.[Conclusions]The combined application of controlled release urea and ordinary urea in peanuts can significantly increase peanut yield compared to just applying ordinary urea.
基金funding support from the Science,Technology and Innovation Commission of Shenzhen Municipality(JCYJ20170818102436104)Natural Science Foundation of Guangdong Province(2018A030310485)the Chinese University of Hong Kong,Shenzhen(PF01001421).
文摘Hydrogels are soft materials consisting of a three-dimensional network of polymer chains.Over the years,hydrogels with different compositions have been developed as drug carriers for diverse biomedical applications,ranging from cancer therapy and wound care to the treatment of neurodegenerative and inflammatory diseases.Most of these carriers,however,are designed only to deliver single agents.Carriers based on hydrogels for co-delivery of multiple agents,with the release rate of each of the co-delivered agents tunable,are lacking.This study reports a one-pot method of fabricating alginate-based complex fibers with the Janus morphology,with carboxymethyl cellulose sodium functioning as a polymeric modifier of the properties of each of the fiber compartments.By using malachite green and minocycline hydrochloride as model drugs,the generated fibers demonstrate the capacity of enabling the release profile of each of the co-delivered drugs to be precisely controlled.Along with their negligible toxicity and the retention of the activity of the loaded drugs,the complex fibers reported in this study warrant further development and optimization for applications that involve co-delivery of multiple agents.
基金The present work was financially supported by National Key R&D Program(2018YFD0600104)Scientific Program of Zhejiang Province of China(2017C02016).
文摘Slow release fertilizers are designed to enhance crop yield and minimizing the loss of nitrogen(N)to environment.However,N release in leaching and loss in ammonia emission from bag controlled release fertilizers have not been previously evaluated under the standardized conditions in soil.Accordingly,a laboratory study was conducted to evaluate the characteristics of N release from a bag controlled fertilizer with 1,3,5 and 7 rows of hole(B-1,B-3,B-5,B-7)and a kraft bag without hole(B-W).The results showed that the amount of N leaching of B-1,B-3,B-5,B-7 and B-W were significantly lower than urea fertilizer without bag(U).The maximum N release from the fertilizers followed the order:U(83.16%)>B-7(54.61%)>B-5(54.02%)>B-W(51.51%)>B-3(48.87%)>B-1(38.60%)during the experimentation.Compared with U treatment,ammonia volatilization losses were significantly decreased by B-1,B-3,B-5,B-7 and B-W treatments.Based on N release and loss,a suitable bag with holes should be considered in practice when using the bag controlled fertilizer to meet an environment good objective.The evaluation method merits further study combined with field experiment.
文摘Encapsulation and controlled release of active agents is a common practice to improve processing and properties of materials and final products in different industries. Today, a large variety of chemical admixtures are used in construction materials, the performance of which could be improved by a better dosage control. This work presents investigations on the controlled release of encapsulated construction chemicals for future applications in construction materials. The high shear mixing technology was used to produce matrix based encapsulations by agglomeration applied to commercially available construction materials. The agglomeration process was varied by the use of different agitator types, the variation of the agitator speed and the application of additional coating materials. The particle size distribution as well as the particle shape of the produced agglomerates was analyzed by automatic image evolution and scanning electron microscopy. The release behavior of the capsules in aqueous solutions was investigated by UV spectroscopy. The obtained results confirmed a theoretical model for the encapsulation and release of admixtures, which was derived from pharmaceutical drug release concepts and adapted to construction materials. The results indicate that the matrix based encapsulation is a promising technique for future applications in the field of construction materials.
文摘Glutathione-responsive carboxymethyl chitosan nanoparticles cross-linked with disulfide bonds were developed for controlled release of herbicides. The nanoparticles were synthesized by selfassembly of amphiphilic carboxymethyl chitosan derivative (CMCS-MUA) in aqueous solution and subsequently producing disulfide cross-linking bonds by ultrasonic treatment. TEM showed that the nanoparticles had a spherical core-shell configuration with a size of about 250 nm. Assessment of stability of the nanoparticles (considering mean diameter, polydispersity, and Zeta potential) was conducted over a period of three months, and the nanoparticles were found to be stable in solution. Herbicide-loaded nanoparticles were prepared using diuron as a model herbicide. In vitro release study revealed that diuron can be released from nanoparticles in a controlled manner depended on the glutathione concentration. Herbicidal activity assays performed with preemergence treatment of target species (Echinochloa crusgalli) showed the effectiveness of diuron- loaded nanoparticles. Assays with nontarget species (Zea mays) showed that the diuronloaded nanoparticles did not affect plant growth. The results indicate that the glutathioneresponsive nanoparticles prepared in this work will be a promising candidate for controlled release of herbicides in agriculture.
文摘This study aimed to develop controlled release formulation of Thiabendazole for reduced contaminations to soil water and agricultural produces. The idea behind this work was based on changing the ionization status of Thiabendazole molecule throughout pH changes to become a cation then adsorbing it to bentonite clay surfaces. Equilibrium concentrations of Thiabendazole in the adsorption solutions were determined by HPLC. Results showed that Thiabendazole was better adsorbed in clay at the lowest pH value (pH 3). Furthermore, raising the temperature of the adsorption reaction increased the adsorbed amount of Thiabendazole. Release experiments showed that Thiabendazole is extremely slower at pH 3 than at pH 5.5 or pH 9. These promising results suggest that application of Thiabendazole clay based formulation may reduce the applied rate and that the released fraction consequently may reduce the environmental contamination. It is also advantageous to use these formulations in the acidic soil for plant disease control.
文摘The goal of the present study is to utilize cis-diamminedichloroplatinum (cisplatin) loaded polymer nanoparticles (NPs) to give a controlled, extended, and local drug therapy for the treatment of cancer. We have used biodegradable and biocompatible poly(lactic-co-glycolic acid) (PLGA) to prepare the NPs by adjusting the double emulsion technique using poly(vinylalcohol) as a surface active agent. The PLGA NPs were characterized for particle size and shape, controlled release of cisplatin, and degradation. Cisplatin solubility in deionized water was increased up to 4 mg/mL by simply changing the solution parameters. Cisplatin encapsulated NPs were incubated in phosphate buffered saline (PBS) at 37?C to study the release kinetics of cisplatin. Cisplatin was released in a sustained manner with less than 20% release during a 3-day period followed by 50% release during a 21-day period. A degradation study of PLGA NPs demonstrated the loss of spherical shape during a 21-day period. We also examined the cisplatin sensitive A2780 cell apoptosis when cells were incubated with cisplatin encapsulated PLGA NPs. A large number of cell apoptosis occurred as a result of cisplatin release from the PLGA NPs. These results suggest that cisplatin encapsulated PLGA NPs can be used to treat the cancer cells by injecting them into a localized site minimizing the side effects.
文摘Two phenoxyherbicide nanocomposites, namely cloprop-layered double hydroxide and cloprop-zinc- layered hydroxide nanocomposites, have been synthesized by using co-precipitation and direct reaction method. PXRD pattern showed an expansion of interlayer spacing with the value of 21.0 Åand 22.7 Åfor cloprop-layered double hydroxide and cloprop-zinc-layered hydroxide nanocomposite, respectively. It is evident from FTIR and elemental analyses that both nanocomposites were successfully intercalated between the interlayers of layered metal hydroxide. Controlled release of cloprop anion from interlayer of nanocomposites for both cloprop-layered double hydroxide and cloprop-zinc-layered hydroxide nanocomposite into phosphate solution was rapid initially and slow thereafter. The percentage of accumulated release of cloprop anion from cloprop-zinc-layered hydroxide nanocomposite was slightly higher than that from cloprop-layered double hydroxide nanocomposite. Kinetic behavior of cloprop release was governed by pseudo-second-order for cloprop-layered double hydroxide nanocomposite while parabolic diffusion for cloprop-zinc-layered hydroxide nanocomposite. Results from this study highlight the potential of both nanocomposites as capsulated material for controlled release of cloprop phenoxyherbicides anion.
文摘Field trials on a silt-loamy paddy soil derived from shallow-sea deposit in direct seeding rice fields were conducted in Zhejiang, China, in 1996 to compare N efficiency of controlled release fertilizers (LP fertilizers) with the conventional urea. Six treatments including CK (no N fertilizer), conventional urea and different types of LP fertilizers at different rates were designed for two succeeding crops of early and late rice. A blend of different types of LP fertilizers as a single preplant "co-situs" application released N in a rate and amount synchronizing with uptake pattern of direct seeding rice. A single preplant application of the LP fertilizers could meet the N requirement of rice for the whole growth period without need of topdressing. Using LP fertilizer blends, equivalent grain yields could be maintained even if the N fertilization rates were reduced by 25%～50% compared with the conventional urea. Agronomic efficiency of the LP fertilizers was 13.6%～ 86.4% higher than that of the conventional urea in early rice and 100%～164.1% in late rice, depending on the amounts of the LP fertilizers applied. N fertilizer recovery rate increased from 27.4% for the conventional application of urea to 41.7%～54.l% for the single preplant "co-situs" application of the LP fertilizers. Use of the LP fertilizers was promising if the increase in production costs due to the high LP fertilizer prices could be compensated by increase in yield and N efficiency, reduction in labor costs and improvement in environment.
文摘This study examined the release characteristics of different N forms in an uncoated slow/controlled-release compound fertilizer (UCRF) and the N uptake and N-use efficiency by rice plants. Water dissolution, soil leaching, and pot experiments were employed. The dynamics of N release from the UCRF could be quantitatively described by three equations: the first-order kinetics equation [Nt = N0 (1-e-kt)], Elovich equation (Nt = a + blnt), and parabola equation (Nt = a + bt0.5), with the best fitting by the first-order kinetics equation for different N (r = 0.9569** - 0.9999**). The release potentials (N0 values estimated by the first-order kinetics equation) of different N in the UCRF decreased in the order of total N > DON > urea-N > NH4+-N > NO3--N in water, and total N > NH4+-N > DON > urea-N > NO3--N in soil, respectively, being in accordance with cumulative amounts of N release. The constants of N release rate (k values and b values) for different N forms were in decreasing order of total N > DON > NH4+-N > NO3--N in water, whereas the k values were urea- N >DON > NH4+-N > total N > NO3--N, and the b values were total N > NH4+-N > DON > NO3--N > urea-N in soil. Compared with a common compound fertilizer, the N-use efficiency, N-agronomy efficiency, and N-physiological efficiency of the UCRF were increased by 11.4%, 8.32 kg kg-1, and 5.17 kg kg-1, respectively. The ratios of different N to total N in the UCRF showed significant correlation with N uptake by rice plants. The findings showed that the first-order kinetics equation [Nt = N0 (1-e-kt)] could be used to describe the release characteristics of different N forms in the fertilizer. The UCRF containing different N forms was more effective in facilitating N uptake by rice compared with the common compound fertilizer containing single urea-N form.
基金the National Key R&D Program of China (2016YFD0300503)the Key Research Program of Jiangsu Province, China (BE2016344)+3 种基金the National Rice Industry Technology System, China (CARS01-27)the National Nature Science Foundation of China (31701350)the Program for Scientific Elitists of Yangzhou University, Chinaa Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions, China
文摘There is limited information about the influence of slow or controlled release fertilizer(S/CRF) on rice yield and quality. In this study, japonica rice cultivar Nanjing 9108 was used to study the effects of three different S/CRFs(polymer-coated urea(PCU), sulfur-coated urea(SCU), and urea formaldehyde(UF)) and two fertilization modes(both S/CRF and common urea(CU) as basal fertilizer, S/CRF as basal and CU as tillering fertilizer) on rice yield and quality. CU only was applied separately as control(CK). Results showed that, rice grain yield, chalky kernel rate, chalky area, overall chalkiness, and the content of gliadin, glutenin, and protein, all showed the trends of UF>PCU>SCU within the same fertilization mode, and showed the trends of S/CRF as basal and CU as tillering fertilizer>both S/CRF and CU as basal fertilizer within the same type of S/CRF. In contrast, the contents of amylose, amylopectin, and starch, as well as taste value, and peak and hot viscosity showed trends of SCU>PCU>UF, and the trends of both S/CRF and CU as basal fertilizer>S/CRF as basal and CU as tillering fertilizer. Among S/CRF treatments and fertilization modes, taste values of cooked rice were positively correlated with amylose, amylopectin, and starch contents, as well as gel consistency, peak viscosity, hot viscosity, and cool viscosity, while negatively correlated with globulin, gliadin, glutenin, and protein contents. The types of S/CRF and fertilization modes are important for improving rice yield and quality. Compared to CK, higher yield and similar quality of rice was achieved with UF as basal and CU as tillering fertilizer, and similar yield with improved appearance and eating and cooking quality of rice was achieved with either both UF and CU as basal fertilizer, or PCU as basal and CU as tillering fertilizer.
文摘Polymethylmethacrylate (PMMA) coated microcapsules of diclofenac sodium (DFS) were prepared by a modified wa-ter-in-oil-in-water (W1/O/W2) emulsion solvent evaporation method using sodium alginate (SAL) as a matrix material in the internal aqueous phase (W1).Their performance with respect to controlled release of the drug in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) were evaluated, and compared with non-matrix microcapsules prepared by the conventional W1/O/W2 emulsion solvent evaporation method. Scanning electron micrographs (SEM) revealed that all the microcapsules were discrete and spherical in shape;however, the surface porosity of the matrix microcap-sules appeared to be less than that of the non-matrix microcapsules. In case of non-matrix microcapsules, an increase in the volume of water in W1 phase resulted in decrease in the drug entrapment efficiency (DEE) along with increase in release of the drug in both SGF and SIF. While in case of matrix microcapsules increase in the amount of SAL in W1 phase and concentration of the coating polymer in organic phase led to increase in DEE of the matrix microcapsules and considerable decrease in the drug release in both SGF and SIF. No interaction between the drug and any of the polymers used to prepare microcapsules was evident from Fourier transform infra-red (FTIR) analysis. The matrix microcapsules prepared using higher concentration of SAL and PMMA released the drug following zero order or Case-II transport model. The matrix microcapsules appeared to be suitable for releasing lesser amounts of DFS in SGF and providing extended release in SIF.
文摘Controlled release fertilizers (CRF) are produced with different rates and durations of nutrient release to cater to different crops with wide ranges of nutrient requirements. A rapid technique is needed to verify the label specifications of nutrient release rate and duration. Polymer-coated urea (PCU) (43% nitrogen [N]) and polymer-coated N, phosphorus (P), potassium (K) (PC_NPK;14-14-14) fertilizer products were used in this study. Soil incubation of the above CRF products at 25℃ showed that 63.6% to 70.8% of total N was released over 220 days (d). At 100℃ in water 100% of N release occurred in about 168 to 216 hours (h). Regression equations were developed for cumulative nutrient release as a function of release time separately at 25℃ and 100℃. Using the above regressions, the release duration for a given percent nutrient release at each temperature was calculated. These values were then used to establish a relationship between the release duration at 25℃ as a function of that at 100℃. This relationship is useful to predict the release duration at 25℃ of an unknown CRF product by conducting a rapid release test in water at 100℃. This study demonstrated that a rapid nutrient release test at 100℃ successfully predicted nutrient release rate and duration at 25℃, for polymer coated fertilizers. Therefore, this rapid test can be used to verify the label release rate and duration of most CRF products.
基金the National Key Technology R&D Program of the 11th Five-Year Period (No.2006BAD10B08)
文摘Polyurethane coated urea slow/controlled release fertilizer was prepared based on urea granules, isocyanate, polyols and paraffin. Isocyanate reacted with polyols to synthesize the polyurethane skin layer on urea granules surface. Paraffin serves as a lubricant during syntheses of polyurethane skin layers. The structure and nutrient release characteristics of the polyurethane skin layers were investigated by FTIR, SEM and TG. Urea nitrogen slow-release behavior of the polyurethane coated urea was tested. The experimental results indicated that compact and dense polyurethane skin layers with a thickness of 10-15 μm were formed on urea surface, the urea nitrogen slow-release time can reach 40-50 days. Paraffin proves to play a key role in inhibiting water to penetrate into urea, but excessive addition would decrease the polyurethane crosslinking density.
基金Project supported by the Innovational Project in Environment and Resources Fields from the Chinese Academy of Sciences (No. KZCX2-402) the National Natural Science Foundation of China (No. 39870431).
文摘A controlled release N fertilizer was developed by the carrier method using natural polysaccharides (PS)and urea. The results showed that mixing of PS and urea led to significant control of urea release. When a cross-linker (boric acid or glutaraldehyde) was added, a better control effect was observed. During a 30 min leaching time the nitrogen release rate from the controlled release fertilizer was nearly constant, which was significantly different from normal urea. One of the controlled release mechanisms was related to space resistance from a large molecular structure. Infrared (IR) analysis indicated that interaction of PS with urea was through a hydrogen bond or a covalent bond. These bonds created an α-helix or high molecular network fertilizer carrier system, which was another reason for a controlled nutrient release. Pot experiment showed that nitrogen use efficiency could increase significantly with a carrier fertilizer.
基金financial support from the Independent Innovation and Achievements Transformation Project of Shandong Province (2014CGZH0302)
文摘Lignin is the main by-product of pulp and papermaking and is not effectively utilized. Conversion of industrial lignins into value-added materials is beneficial for the effective utilization of resources as well as for environmental protection. Because of their adsorptivity, slow-release property,biocompatibility, and biodegradability, lignin and its derivatives find potential applications as eco-friendly slow/controlled release materials in agricultural fields. This report reviews the recent research advances in lignin-based slow/controlled release fertilizers and pesticides.
