This study evaluated the effectiveness of carboxymethyl cellulose (CMC) hydrogel as a dental gel in delivering hydroxyapatite (HAp) to dentine tubules and reducing/eliminating dental hypersensitivity. The hydrogel was...This study evaluated the effectiveness of carboxymethyl cellulose (CMC) hydrogel as a dental gel in delivering hydroxyapatite (HAp) to dentine tubules and reducing/eliminating dental hypersensitivity. The hydrogel was prepared by mixing solutions of CMC/ glycerol and distilled water/sorbitol then modified to contain 0%, 10%, 20% and 30% HAp. The pH of the hydrogels decreased and viscosity increased with increasing HAp content. A viability assay was performed to determine the cytotoxicity of the hydrogel samples and proliferation/adhesion behavior of cells cultured on the hydrogel surface. The samples promoted cell proliferation and became more biocompatible with the addition of HAp. Dentin discs were prepared and then treated with the fabricated hydrogels. Occlusion of the dentine tubules was observed by scanning electron microscopy before and after treatment. Blocking of the dentin tubules was markedly affected by the addition of HAp to the hydrogel samples that can result in possible reduction or elimination of hypersensitivity.展开更多
Aims: to determine the prevalence of gingival recession and dentine hypersensitivity among the study population, and evaluate the distribution of dentine hypersensitivity among various types of teeth in mild, moderate...Aims: to determine the prevalence of gingival recession and dentine hypersensitivity among the study population, and evaluate the distribution of dentine hypersensitivity among various types of teeth in mild, moderate and severe degrees of gingival recession. Relationship between the severity of gingival recession and dentine hypersensitivity was also evaluated. Materials and Methods: Clinical examination was conducted on six hundred and seventy-six patients (283 males and 393 females). Their ages ranged from 18 to 74 years old (mean 35.4, SD = 11.2). A valid and reliable questionnaire was filled by the participated patients. Results: The prevalence of gingival recession was 79.0%, and the prevalence of dentine hypersensitivity within the patients with gingival recession was 23.6%. The most common teeth affected by dentine hypersensitivity were the lower incisors. Dentine hypersensitivity was more commonly found in teeth with mild recession. Conclusion: Increased gingival recession does not necessarily mean increased incidence of dentine hypersensitivity.展开更多
Dentine hypersensitivity is an annoying worldwide disease,yet its mechanism remains unclear.The long-used hydrodynamic theory,a stimuli-induced fluid-flow process,describes the pain processes.However,no experimental e...Dentine hypersensitivity is an annoying worldwide disease,yet its mechanism remains unclear.The long-used hydrodynamic theory,a stimuli-induced fluid-flow process,describes the pain processes.However,no experimental evidence supports the statements.Here,we demonstrate that stimuli-induced directional cation transport,rather than fluid-flow,through dentinal tubules actually leads to dentine hypersensitivity.The in vitro/in vivo electro-chemical and electro-neurophysiological approaches reveal the cation current through the nanoconfined negatively charged dentinal tubules coming from external stimuli(pressure,pH,and temperature)on dentin surface and further triggering the nerve impulses causing the dentine hypersensitivity.Furthermore,the cationic-hydrogels blocked dentinal tubules could significantly reduce the stimuli-triggered nerve action potentials and the anionhydrogels counterpart enhances those,supporting the cation-flow transducing dentine hypersensitivity.Therefore,the inspired ion-blocking desensitizing therapies have achieved remarkable pain relief in clinical applications.The proposed mechanism would enrich the basic knowledge of dentistry and further foster breakthrough initiatives in hypersensitivity mitigation and cure.展开更多
Dear Editor,The tuberculin skin test(TST)reagents have continuously improved,with the ESAT6-CFP10(EC)test having recently been introduced,but are seldom based on the direction of the delayed-type hypersensitivity(DTH)...Dear Editor,The tuberculin skin test(TST)reagents have continuously improved,with the ESAT6-CFP10(EC)test having recently been introduced,but are seldom based on the direction of the delayed-type hypersensitivity(DTH)mechanism.Previous studies only partially showed the infiltration and activation of immune cells and the production of cytokines of the skin induration[1,2],and lack the detailed measurements of cell proportions and gene expression in the DTH response.Therefore,in this study,we revealed the comprehensive characteristics of DTH by single-cell RNA sequencing(scRNA-seq)in the guinea pig tuberculosis(TB)model[Experimental Animal Welfare Ethics Committee,Beijing Tuberculosis and Thoracic Tumor Research Institute(2021-064)].展开更多
Background: A reduced residual dentine thickness following crown preparation has a conceivable impact on pulp degeneration by increasing the pulp’s susceptibility to injury. In crown preparations, three different fin...Background: A reduced residual dentine thickness following crown preparation has a conceivable impact on pulp degeneration by increasing the pulp’s susceptibility to injury. In crown preparations, three different finishing lines are used. These are shoulder, chamfer, and knife edge. Each with its comparative advantages and disadvantages. There is inadequate scientific evidence on which of these finishing lines will leave the most amount of residual dentine, after standard crown preparations on mandibular incisors and maxillary lateral incisors to preserve their pulpal health. Objective: To evaluate residual dentine thickness following various cervical finishing lines of anterior crown preparations for zirconia full coverage. Materials and Methods: A prospective comparative study was conducted from September 2<sup>nd</sup> to November 5<sup>th</sup>, 2022, using mandibular incisors and maxillary laterals extracted from individuals between ages 18 to 30. Each of the three groups of teeth was randomly divided into three cervical margin preparations as follows: Shoulder (n = 15), chamfer (n = 15), and knife edge (n = 15). The teeth were disinfected and stored in 10% formalin. Silicone impressions followed by crown preparations were done on teeth mounted on phantom head manikins. The teeth were sectioned 0.5 mm coronal to the cemento-enamel junction using a separating disc and the mesial, distal, buccal, and lingual thickness were measured using a digital caliper. ANOVA analysis was applied to assess the difference in mean residual dentine thickness among the finishing lines and the Tukey test used for mean comparison. Results: Knife edge finishing lines had 2.05 mm of residual dentine thickness, for upper lateral incisors lingually and had an amount of 1.55 mm and 1.47 mm for lower central teeth mesially and distally respectively. Shoulder finishing lines had an amount of 0.58 mm for lower lateral incisors mesially. Interproximal areas had the least amounts of residual dentine for shoulder and chamfer finishing lines of 0.58 mm and 0.78 mm respectively. Conclusions: There was a significant statistical difference in the thickness of residual dentine at the various cervical finishing line margins. The knife edge finishing line was protective enough for zirconia crown preparations.展开更多
Background: The available data on cryptogenic chronic hypersensitivity pneumonitis (ccHP) indicate an inherited predisposition to disease with triggering autoimmune phenomena. Hence, we evaluated prospectively the rol...Background: The available data on cryptogenic chronic hypersensitivity pneumonitis (ccHP) indicate an inherited predisposition to disease with triggering autoimmune phenomena. Hence, we evaluated prospectively the role of a new autoimmune regimen in treatment of its severe and progressive disease. Patients and Methods: A total of 9 patients were included in the study. They had criteria for ccHP viz. 1) clinical features of cryptogenic progressive restrictive lung disease, 2) high-resolution computed tomographic pulmonary abnormalities, and 3) bronchoalveolar lavage lymphocytosis (>30%). The regimen consisted of an initial induction phase of 3-month Solumedrol 1 g IV daily for 3 days followed by 1 month of Prednisone (P) 60 mg/day to tapered down to discontinuation by 3rd month. They also had received Mycophenolate mofetil (MMF) 1 g twice daily for 3 months. This stage was followed by a maintenance phase of yearly Rituximab infusions (1 g followed by 1 g 2 weeks later). Results: compared to their previous 6 months deterioration;all patients showed significant improvement in their forced vital volume, diffusion capacity for carbon monoxide, 6-minutes-walk after the induction phase (at 3 months) which improved further at 15 months with Rituximab therapy. Conclusion: After 3-month induction therapy with P and MMF;yearly R treatment is a safe, practical and effective long-term therapy for ccHP.展开更多
Background: Knife edge, chamfer, and shoulder are the three distinct finishing lines utilized in crown preparations. Each finishing line has relative benefits and drawbacks. However, not much scientific data exists re...Background: Knife edge, chamfer, and shoulder are the three distinct finishing lines utilized in crown preparations. Each finishing line has relative benefits and drawbacks. However, not much scientific data exists regarding which of these finishing lines will leave the most amount of residual dentine coronally on maxillary lateral incisors and mandibular incisors. Objective: To assess the coronal residual dentine thickness after different cervical finishing lines for anterior crown preparations. Materials and Methods: A prospective comparative study was conducted including mandibular incisors and maxillary laterals that were taken from subjects from 18 to 30 years old. Teeth in each of the three groups were randomly separated into three cervical margin preparation groups: knife edge, chamfer and shoulder. The teeth were then prepared for single crown coverage using these finishing lines. The teeth were sectioned halfway through the crown preparation, and a digital caliper was used to determine the residual dentine thickness at the buccal, lingual, mesial and distal areas. The Tukey test was used for mean comparison, and ANOVA analysis was used to evaluate the variation in mean residual dentine thickness. Results: For upper lateral incisors, knife edge finishing lines showed the highest amount of remaining dentine thickness—1.5 mm. lingually, while the upper lateral incisors mesially had the least amount of 0.53 mm for shoulder finishing lines. The least residual dentine (0.53 mm for the shoulder and 0.70 mm for the chamfer finishing line) was found in the interproximal portions of all the teeth that were selected. Lower central incisors had the least amount of residual dentine 0.61 mm for shoulder preparations mesially whiles lower lateral incisors had the least amount of residual dentine for shoulder preparations 0.58 mm distally. There was a statistically significant difference of 0.001 across the groups. Conclusion: The thickness of residual dentine seen coronally after the three finishing line preparations showed a statistically significant difference and the knife edge finishing line provided enough coronal protection within the scope of this study.展开更多
Objective To present a rare case of skin allergic reaction to gadobutrol,a magnetic resonance imaging(MRI)contrast agent,in a 37-year-old man.Methods The adverse reactions of gadobutrol were analyzed combined with the...Objective To present a rare case of skin allergic reaction to gadobutrol,a magnetic resonance imaging(MRI)contrast agent,in a 37-year-old man.Methods The adverse reactions of gadobutrol were analyzed combined with the instructions and related literatures.Results and Conclusion The presence of this patient is consistent with the adverse reactions in the instructions of gadobutrol.The incidence of ADR in gadobutrol is considered to be low,although sometimes patients report a hypersensitivity reaction when undergoing MRI.There are only a few cases of immediate adverse reactions to gadobutrol.However,we should improve the ability of medical staff to use drugs safely and take preventive measures.展开更多
文摘This study evaluated the effectiveness of carboxymethyl cellulose (CMC) hydrogel as a dental gel in delivering hydroxyapatite (HAp) to dentine tubules and reducing/eliminating dental hypersensitivity. The hydrogel was prepared by mixing solutions of CMC/ glycerol and distilled water/sorbitol then modified to contain 0%, 10%, 20% and 30% HAp. The pH of the hydrogels decreased and viscosity increased with increasing HAp content. A viability assay was performed to determine the cytotoxicity of the hydrogel samples and proliferation/adhesion behavior of cells cultured on the hydrogel surface. The samples promoted cell proliferation and became more biocompatible with the addition of HAp. Dentin discs were prepared and then treated with the fabricated hydrogels. Occlusion of the dentine tubules was observed by scanning electron microscopy before and after treatment. Blocking of the dentin tubules was markedly affected by the addition of HAp to the hydrogel samples that can result in possible reduction or elimination of hypersensitivity.
文摘Aims: to determine the prevalence of gingival recession and dentine hypersensitivity among the study population, and evaluate the distribution of dentine hypersensitivity among various types of teeth in mild, moderate and severe degrees of gingival recession. Relationship between the severity of gingival recession and dentine hypersensitivity was also evaluated. Materials and Methods: Clinical examination was conducted on six hundred and seventy-six patients (283 males and 393 females). Their ages ranged from 18 to 74 years old (mean 35.4, SD = 11.2). A valid and reliable questionnaire was filled by the participated patients. Results: The prevalence of gingival recession was 79.0%, and the prevalence of dentine hypersensitivity within the patients with gingival recession was 23.6%. The most common teeth affected by dentine hypersensitivity were the lower incisors. Dentine hypersensitivity was more commonly found in teeth with mild recession. Conclusion: Increased gingival recession does not necessarily mean increased incidence of dentine hypersensitivity.
基金We thank the National Key R&D Program of China(No.2020YFA0710401)the National Natural Science Foundation of China(Nos.82225012,81922019,82071161,81991505,22122207,21988102,and 52075138)+1 种基金the Young Elite Scientist Sponsorship Program by CAST(No.2020QNRC001)the Beijing Nova Program(No.211100002121013).
文摘Dentine hypersensitivity is an annoying worldwide disease,yet its mechanism remains unclear.The long-used hydrodynamic theory,a stimuli-induced fluid-flow process,describes the pain processes.However,no experimental evidence supports the statements.Here,we demonstrate that stimuli-induced directional cation transport,rather than fluid-flow,through dentinal tubules actually leads to dentine hypersensitivity.The in vitro/in vivo electro-chemical and electro-neurophysiological approaches reveal the cation current through the nanoconfined negatively charged dentinal tubules coming from external stimuli(pressure,pH,and temperature)on dentin surface and further triggering the nerve impulses causing the dentine hypersensitivity.Furthermore,the cationic-hydrogels blocked dentinal tubules could significantly reduce the stimuli-triggered nerve action potentials and the anionhydrogels counterpart enhances those,supporting the cation-flow transducing dentine hypersensitivity.Therefore,the inspired ion-blocking desensitizing therapies have achieved remarkable pain relief in clinical applications.The proposed mechanism would enrich the basic knowledge of dentistry and further foster breakthrough initiatives in hypersensitivity mitigation and cure.
基金supported by the National Natural Science Foundation(81871691)the Beijing Municipal Natural Science Foundation(KZ202110025034).
文摘Dear Editor,The tuberculin skin test(TST)reagents have continuously improved,with the ESAT6-CFP10(EC)test having recently been introduced,but are seldom based on the direction of the delayed-type hypersensitivity(DTH)mechanism.Previous studies only partially showed the infiltration and activation of immune cells and the production of cytokines of the skin induration[1,2],and lack the detailed measurements of cell proportions and gene expression in the DTH response.Therefore,in this study,we revealed the comprehensive characteristics of DTH by single-cell RNA sequencing(scRNA-seq)in the guinea pig tuberculosis(TB)model[Experimental Animal Welfare Ethics Committee,Beijing Tuberculosis and Thoracic Tumor Research Institute(2021-064)].
文摘Background: A reduced residual dentine thickness following crown preparation has a conceivable impact on pulp degeneration by increasing the pulp’s susceptibility to injury. In crown preparations, three different finishing lines are used. These are shoulder, chamfer, and knife edge. Each with its comparative advantages and disadvantages. There is inadequate scientific evidence on which of these finishing lines will leave the most amount of residual dentine, after standard crown preparations on mandibular incisors and maxillary lateral incisors to preserve their pulpal health. Objective: To evaluate residual dentine thickness following various cervical finishing lines of anterior crown preparations for zirconia full coverage. Materials and Methods: A prospective comparative study was conducted from September 2<sup>nd</sup> to November 5<sup>th</sup>, 2022, using mandibular incisors and maxillary laterals extracted from individuals between ages 18 to 30. Each of the three groups of teeth was randomly divided into three cervical margin preparations as follows: Shoulder (n = 15), chamfer (n = 15), and knife edge (n = 15). The teeth were disinfected and stored in 10% formalin. Silicone impressions followed by crown preparations were done on teeth mounted on phantom head manikins. The teeth were sectioned 0.5 mm coronal to the cemento-enamel junction using a separating disc and the mesial, distal, buccal, and lingual thickness were measured using a digital caliper. ANOVA analysis was applied to assess the difference in mean residual dentine thickness among the finishing lines and the Tukey test used for mean comparison. Results: Knife edge finishing lines had 2.05 mm of residual dentine thickness, for upper lateral incisors lingually and had an amount of 1.55 mm and 1.47 mm for lower central teeth mesially and distally respectively. Shoulder finishing lines had an amount of 0.58 mm for lower lateral incisors mesially. Interproximal areas had the least amounts of residual dentine for shoulder and chamfer finishing lines of 0.58 mm and 0.78 mm respectively. Conclusions: There was a significant statistical difference in the thickness of residual dentine at the various cervical finishing line margins. The knife edge finishing line was protective enough for zirconia crown preparations.
文摘Background: The available data on cryptogenic chronic hypersensitivity pneumonitis (ccHP) indicate an inherited predisposition to disease with triggering autoimmune phenomena. Hence, we evaluated prospectively the role of a new autoimmune regimen in treatment of its severe and progressive disease. Patients and Methods: A total of 9 patients were included in the study. They had criteria for ccHP viz. 1) clinical features of cryptogenic progressive restrictive lung disease, 2) high-resolution computed tomographic pulmonary abnormalities, and 3) bronchoalveolar lavage lymphocytosis (>30%). The regimen consisted of an initial induction phase of 3-month Solumedrol 1 g IV daily for 3 days followed by 1 month of Prednisone (P) 60 mg/day to tapered down to discontinuation by 3rd month. They also had received Mycophenolate mofetil (MMF) 1 g twice daily for 3 months. This stage was followed by a maintenance phase of yearly Rituximab infusions (1 g followed by 1 g 2 weeks later). Results: compared to their previous 6 months deterioration;all patients showed significant improvement in their forced vital volume, diffusion capacity for carbon monoxide, 6-minutes-walk after the induction phase (at 3 months) which improved further at 15 months with Rituximab therapy. Conclusion: After 3-month induction therapy with P and MMF;yearly R treatment is a safe, practical and effective long-term therapy for ccHP.
文摘Background: Knife edge, chamfer, and shoulder are the three distinct finishing lines utilized in crown preparations. Each finishing line has relative benefits and drawbacks. However, not much scientific data exists regarding which of these finishing lines will leave the most amount of residual dentine coronally on maxillary lateral incisors and mandibular incisors. Objective: To assess the coronal residual dentine thickness after different cervical finishing lines for anterior crown preparations. Materials and Methods: A prospective comparative study was conducted including mandibular incisors and maxillary laterals that were taken from subjects from 18 to 30 years old. Teeth in each of the three groups were randomly separated into three cervical margin preparation groups: knife edge, chamfer and shoulder. The teeth were then prepared for single crown coverage using these finishing lines. The teeth were sectioned halfway through the crown preparation, and a digital caliper was used to determine the residual dentine thickness at the buccal, lingual, mesial and distal areas. The Tukey test was used for mean comparison, and ANOVA analysis was used to evaluate the variation in mean residual dentine thickness. Results: For upper lateral incisors, knife edge finishing lines showed the highest amount of remaining dentine thickness—1.5 mm. lingually, while the upper lateral incisors mesially had the least amount of 0.53 mm for shoulder finishing lines. The least residual dentine (0.53 mm for the shoulder and 0.70 mm for the chamfer finishing line) was found in the interproximal portions of all the teeth that were selected. Lower central incisors had the least amount of residual dentine 0.61 mm for shoulder preparations mesially whiles lower lateral incisors had the least amount of residual dentine for shoulder preparations 0.58 mm distally. There was a statistically significant difference of 0.001 across the groups. Conclusion: The thickness of residual dentine seen coronally after the three finishing line preparations showed a statistically significant difference and the knife edge finishing line provided enough coronal protection within the scope of this study.
文摘Objective To present a rare case of skin allergic reaction to gadobutrol,a magnetic resonance imaging(MRI)contrast agent,in a 37-year-old man.Methods The adverse reactions of gadobutrol were analyzed combined with the instructions and related literatures.Results and Conclusion The presence of this patient is consistent with the adverse reactions in the instructions of gadobutrol.The incidence of ADR in gadobutrol is considered to be low,although sometimes patients report a hypersensitivity reaction when undergoing MRI.There are only a few cases of immediate adverse reactions to gadobutrol.However,we should improve the ability of medical staff to use drugs safely and take preventive measures.
