Amplitude quantization is one of the main sources of spurious noise frequencies in Direct Digital Frequency Synthesizers (DDFSs), which affect their application to many wireless telecommu- nication systems. In this pa...Amplitude quantization is one of the main sources of spurious noise frequencies in Direct Digital Frequency Synthesizers (DDFSs), which affect their application to many wireless telecommu- nication systems. In this paper, two different kinds of spurious signals due to amplitude quantization in DDFSs are exactly formulated in the time domain and detailedly compared in the frequency do- main, and the effects of the DDFS parameter variations on the spurious performance are thoroughly studied. Then the spectral properties and power levels of the amplitude-quantization spurs in the absence of phase-accumulator truncation are emphatically analyzed by waveform estimation and computer simulation, and several important conclusions are derived which can provide theoretical support for parameter choice and spurious performance evaluation in the application of DDFSs.展开更多
This paper presents a high speed ROM-less direct digital frequency synthesizer （DDFS） which has a phase resolution of 32 bits and a magnitude resolution of 10 bits. A 10-bit nonlinear segmented DAC is used in place ...This paper presents a high speed ROM-less direct digital frequency synthesizer （DDFS） which has a phase resolution of 32 bits and a magnitude resolution of 10 bits. A 10-bit nonlinear segmented DAC is used in place of the ROM look-up table for phase-to-sine amplitude conversion and the linear DAC in a conventional DDFS. The design procedure for implementing the nonlinear DAC is presented. To ensure high speed, current mode logic （CML） is used. The chip is implemented in Chartered 0.35μm COMS technology with active area of 2.0 × 2.5 mm^2 and total power consumption of 400 mW at a single 3.3 V supply voltage. The maximum operating frequency is 850 MHz at room temperature and 1.0 GHz at 0℃.展开更多
This paper presents a direct digital frequency synthesizer （DDFS） for high speed application based on multi-channel structure. This DDFS has phase resolution of 32 bits and magnitude resolution of 12 bits. In order ...This paper presents a direct digital frequency synthesizer （DDFS） for high speed application based on multi-channel structure. This DDFS has phase resolution of 32 bits and magnitude resolution of 12 bits. In order to ensure the high speed and high resolution at the same time, the multi-channel sampling technique is used and a 12 bits linear digital-to-analog converter is implemented. The chip is fabricated in TSMC 130 nm CMOS technology with active area of 0.89 x 0.98 mm2 and total power consumption of 300 mW at a single 1.2 V supply voltage. The maximum operating speed is up to 2.0 GHz at room temperature.展开更多
Spurious signals in direct digital frequency synthesizers （DDFSs） are partly caused by amplitude quantization and phase truncation, which affect their application to many wireless telecommunication systems. These si...Spurious signals in direct digital frequency synthesizers （DDFSs） are partly caused by amplitude quantization and phase truncation, which affect their application to many wireless telecommunication systems. These signals are deterministic and periodic in the time domain, so they appear as line spectra in the frequency domain. Two types of spurious signals due to amplitude quantization are exactly formulated and compared in the time and frequency domains respectively. Then the frequency spectra and power levels of the spurious signals due to amplitude quantization in the absence of phase-accumulator truncation are emphatically analyzed, and the effects of the DDFS parameter variations on the spurious signals are thoroughly studied by computer simulation. And several important conclusions are derived which can provide theoretical support for parameter choice and spurious performance evaluation in the application of DDFSs.展开更多
This paper proposes the design and research on the high bandwidth linear frequency sweep signal source involved in the readout unit module of the wireless passive pressure sensor in high temperature based on the princ...This paper proposes the design and research on the high bandwidth linear frequency sweep signal source involved in the readout unit module of the wireless passive pressure sensor in high temperature based on the principle of mutual inductance coupling which is applied widely at present. The operating principle of the linear sweep frequency source based on the direct digital frequency synthesis （DDS） technology is introduced, and the implementation method of the hardware circuit and logic sequential control process required in our system has been realized utilizing this technology. Through the experiments under different conditions of the step value, the sweep range and other related design indicators, the influence on the extraction method of resonance frequency information, extraction accuracy, and others during the readout system of the mutual inductance coupling sensor are analyzed and studied. The design of the linear frequency sweep signal source is realized with a resonance frequency change resolution of 6 kHz, a minimum step value of 1 kHz, and a precision of frequency for 0.116 Hz within the sweep width of 1 MHz - 100MHz. Due to the use of the integrated commercial chip, the linear sweep frequency source is made small in size, high working frequency, high resolution and low step values for the readout unit modularized of a higher application value.展开更多
基金Supported by National High-Technology Research and Development Plan of China (Grant No.2006AA01Z452)
文摘Amplitude quantization is one of the main sources of spurious noise frequencies in Direct Digital Frequency Synthesizers (DDFSs), which affect their application to many wireless telecommu- nication systems. In this paper, two different kinds of spurious signals due to amplitude quantization in DDFSs are exactly formulated in the time domain and detailedly compared in the frequency do- main, and the effects of the DDFS parameter variations on the spurious performance are thoroughly studied. Then the spectral properties and power levels of the amplitude-quantization spurs in the absence of phase-accumulator truncation are emphatically analyzed by waveform estimation and computer simulation, and several important conclusions are derived which can provide theoretical support for parameter choice and spurious performance evaluation in the application of DDFSs.
文摘This paper presents a high speed ROM-less direct digital frequency synthesizer （DDFS） which has a phase resolution of 32 bits and a magnitude resolution of 10 bits. A 10-bit nonlinear segmented DAC is used in place of the ROM look-up table for phase-to-sine amplitude conversion and the linear DAC in a conventional DDFS. The design procedure for implementing the nonlinear DAC is presented. To ensure high speed, current mode logic （CML） is used. The chip is implemented in Chartered 0.35μm COMS technology with active area of 2.0 × 2.5 mm^2 and total power consumption of 400 mW at a single 3.3 V supply voltage. The maximum operating frequency is 850 MHz at room temperature and 1.0 GHz at 0℃.
文摘This paper presents a direct digital frequency synthesizer （DDFS） for high speed application based on multi-channel structure. This DDFS has phase resolution of 32 bits and magnitude resolution of 12 bits. In order to ensure the high speed and high resolution at the same time, the multi-channel sampling technique is used and a 12 bits linear digital-to-analog converter is implemented. The chip is fabricated in TSMC 130 nm CMOS technology with active area of 0.89 x 0.98 mm2 and total power consumption of 300 mW at a single 1.2 V supply voltage. The maximum operating speed is up to 2.0 GHz at room temperature.
基金supported by the National Grand Fundamental Research 973 Program of China(2004CB318109)the National High Technology Research and Development Program of China(863 Program)(2006AA01Z452).
文摘Spurious signals in direct digital frequency synthesizers （DDFSs） are partly caused by amplitude quantization and phase truncation, which affect their application to many wireless telecommunication systems. These signals are deterministic and periodic in the time domain, so they appear as line spectra in the frequency domain. Two types of spurious signals due to amplitude quantization are exactly formulated and compared in the time and frequency domains respectively. Then the frequency spectra and power levels of the spurious signals due to amplitude quantization in the absence of phase-accumulator truncation are emphatically analyzed, and the effects of the DDFS parameter variations on the spurious signals are thoroughly studied by computer simulation. And several important conclusions are derived which can provide theoretical support for parameter choice and spurious performance evaluation in the application of DDFSs.
文摘This paper proposes the design and research on the high bandwidth linear frequency sweep signal source involved in the readout unit module of the wireless passive pressure sensor in high temperature based on the principle of mutual inductance coupling which is applied widely at present. The operating principle of the linear sweep frequency source based on the direct digital frequency synthesis （DDS） technology is introduced, and the implementation method of the hardware circuit and logic sequential control process required in our system has been realized utilizing this technology. Through the experiments under different conditions of the step value, the sweep range and other related design indicators, the influence on the extraction method of resonance frequency information, extraction accuracy, and others during the readout system of the mutual inductance coupling sensor are analyzed and studied. The design of the linear frequency sweep signal source is realized with a resonance frequency change resolution of 6 kHz, a minimum step value of 1 kHz, and a precision of frequency for 0.116 Hz within the sweep width of 1 MHz - 100MHz. Due to the use of the integrated commercial chip, the linear sweep frequency source is made small in size, high working frequency, high resolution and low step values for the readout unit modularized of a higher application value.
