The dissolution of alumina-based refractory ceramics in CaO-Al2O3-SiO_(2)slag melts was performed based on the in-situ observation system of an ultra-high-temperature laser confocal microscope,and the effect of the Ca...The dissolution of alumina-based refractory ceramics in CaO-Al2O3-SiO_(2)slag melts was performed based on the in-situ observation system of an ultra-high-temperature laser confocal microscope,and the effect of the CaO/SiO_(2)slag mass ratio(C/S ratio)on the dissolution rate of alumina-based refractory ceramics was investigated.The results indicate that the dissolution rate increases with an increase of the C/S ratio and is mainly controlled by diffusion.During the early stage of dissolution,for all C/S ratios,the dissolution process conforms to the classical invariant interface approximation model.During the later stage of dissolution,when the C/S ratio is≥6,the dissolution process is significantly different from the model above because of the formation of a thick interfacial layer,which can be explained by dissolution kinetics.展开更多
Determination of dissolution rate of alumina is one of the classical problems in aluminum electrolysis. A novel method which can measure the dissolution rate of alumina was presented. Effect of factors on dissolution ...Determination of dissolution rate of alumina is one of the classical problems in aluminum electrolysis. A novel method which can measure the dissolution rate of alumina was presented. Effect of factors on dissolution rate of alumina was studied intuitively and roundly using transparent quartz electrobath and image analysis techniques. Images about dissolution process of alumina were taken at an interval of fixed time from transparent quartz electrobath of double rooms. Gabor wavelet transforms were used for extracting and describing the texture features of each image. After subsampling several times, the dissolution rate of alumina was computed using these texture features in local neighborhood of samples. Regression equation of the dissolution rate of alumina was obtained using these dissolution rates. Experiments show that the regression equation of the dissolution rate of alumina is y=-0.000 5x^3＋0.024 0x^2-0.287 3x＋ 1.276 7 for Na3AIF6-AIF3-Al2O3-CaF2-LiF- MgF2 system at 920 ℃.展开更多
Aim To study the effect of complexation with hydroxylpropyl-β-cyclodextrin(HP-β-CD) on the solubility, dissolution rate and chemical stability of prostaglandin E_1 (PGE_1) ,thereby providing a basis for preparing a ...Aim To study the effect of complexation with hydroxylpropyl-β-cyclodextrin(HP-β-CD) on the solubility, dissolution rate and chemical stability of prostaglandin E_1 (PGE_1) ,thereby providing a basis for preparing a stable solid or aqueous preparation of PGE_1 formulatedwith HP-β-CD. Methods The effect of HP-β-CD on the solubility of PGE_1 was studied by phasesolubility method. The formation of inclusion complexes of PGE_1 with HP-β-CD in the aqueoussolution was confirmed by UV spectra, circular dichroism spectroscopy, and that in the solid stateby IR spectra and X-ray diffractome-try. An solid inclusion complex of PGE_1 with HP-β-CD wasprepared by lyophilization. The dissolution rate and stability of the inclusion complex weredetermined and compared with those of PGE_1 alone. Meanwhile, the stability of PGE_1 aqueoussolutions in the presence of HP-β-CD was studied under different pH conditions. Results Thesolubility of PGE_1 increased linearly with increasing HP-β-CD concentration in various pH bufferedsolutions, showing typical A_L-type phase solubility diagrams. The stability and dissolution rateof the solid inclusion complex of PGE_1 were significantly increased, compared with those of purePGE_1 . The stability of PGE_1 in HP-β-CD solutions was also obviously improved under acidic andbasic conditions, but the stabilizing effect was absent under neutral conditions. Conclusions Thesolubility,dissolution rate and chemical stability of PGE_1 are markedly improved by complexationwith HP-β-CD: It is quite possible to prepare a stable PGE_1 inclusion complex-containing soliddosage forms, but almost impossible to obtain a stable aqueous preparation of PGE_1 formulated withHP-β-CD.展开更多
The effects of re-crystallization of prednisolone as a poorly water-soluble drug in aqueous surfactant solutions on its dissolution rate were investigated. A significant enhancement was observed for crystal dissolutio...The effects of re-crystallization of prednisolone as a poorly water-soluble drug in aqueous surfactant solutions on its dissolution rate were investigated. A significant enhancement was observed for crystal dissolution rate in hydrophilic surfactants such as tween 80 and sodium lauryl sulfate （SLS）. Differential scanning calorimetry （DSC） and Fourier transform infrared spectroscopy （FT-IR） indicated the existence of both form Ⅰ and Ⅱ ofprednisolone in SLS treated crystals. The FT-IR results also showed that, only form Ⅱ could be detected in prednisolone crystals without surfactant and prednisolone form Ⅲ was produced in tween 80 treated crystals. These results were also confirmed by X-ray （XRD） diffraction and scanning electron microscopy （SEM）. In general, the results indicated that the presence of hydrophilic surfactants could generate forms Ⅱ and Ⅲ of the crystals. These forms would give rlse to the increase of prednisolone＇s dissolution rate owing to their physicochemical instability and more hydrophilic property in comparison with stable polymorph of form Ⅰ.展开更多
Carbamazepine(CBZ)is an anticonvulsant with very low water solubility,presenting as a white crystalline powder with poor mechanical properties and is hard to bend.To enhance CBZ's physicochemical properties,such a...Carbamazepine(CBZ)is an anticonvulsant with very low water solubility,presenting as a white crystalline powder with poor mechanical properties and is hard to bend.To enhance CBZ's physicochemical properties,such as water solubility and mechanical properties,we selected six cocrystal coformers(CCFs):nicotinamide(NIC),benzamide(BZM),salicylic acid(SCA),fumaric acid(FMA),trimesic acid(TMA),and hesperetin(HPE).Six CBZ cocrystals were successfully prepared using the solution method.Fourier transform infrared spectroscopy(FT-IR),powder X-ray diffraction(PXRD),differential scanning calorimetry(DSC),and single crystal X-ray diffraction(SCXRD)were used to characterize the crystal structures and gain comprehensive insights into the six cocrystals.The mechanical,fluorescence,and solubility properties of the six cocrystals were tested.The results reveal that most of the prepared cocrystals exhibit improved water solubility and mechanical properties when compared to CBZ.Among them,the dissolution rate of cocrystals excluded from CBZ-HPE has increased by an average of 3 or 4 times compared to CBZ,while CBZ-HPE exhibits superior mechanical properties.Moreover,all six cocrystals possess better fluorescence performance than CBZ.We thoroughly evaluated the mechanical properties of the cocrystals through both experimental and theoretical approaches.This work provides a new direction for studying drug cocrystals to improve the physicochemical properties of drugs.展开更多
The calcite dissolution rates at 50-250 ℃ and 20 MPa in deionized water with flow rate varying from 0.2 to 5 mL/min were experimentally measured in a continuous flow column pressure vessel reactor. Equilibrium concen...The calcite dissolution rates at 50-250 ℃ and 20 MPa in deionized water with flow rate varying from 0.2 to 5 mL/min were experimentally measured in a continuous flow column pressure vessel reactor. Equilibrium concentration （Ceq） of calcite dissolution in deionized water at 20 MPa was determined using dissolution data according to the iterative method presented by Jeschke and Dreybrodt. The equilibrium concentrations at 50, 100, 150, 200 and 250 ℃ are 1.84×10^-4, 2.23×10^-4, 2.25×10^-4, 2.31×10^-4 and 2.24×10^-4 mol/L, respectively. The Ceq increases first and then decreases with temperature varying from 50 to 250 ℃ at 20 MPa, and the same variation trend occurs at 10 MPa with lower values. The maximum value （or extremum） of Ceq would increase with temperature at constant pressures. The dissolution reaction of calcite in this experiment is approaching the calcite equilibrium, and the reaction order doesn＇t keep a constant at different temperatures, which could imply that a change of the reac- tion mechanism was occurring. The Arrhenius equation shouldn＇t be used to calculate apparent activation energy using rate constant data at different temperatures when the reaction order or reaction mechanism changed.展开更多
Chemically resistant anodic oxide layers were formed on pure aluminum substrates in oxalic acid-sulphuric acid bath.Acid dissolution tests of the obtained anodic layers were achieved in accordance with the ASTM B 680-...Chemically resistant anodic oxide layers were formed on pure aluminum substrates in oxalic acid-sulphuric acid bath.Acid dissolution tests of the obtained anodic layers were achieved in accordance with the ASTM B 680-80 specifications：35mL/L 85% H3PO4＋20g/L CrO3 at 38℃.Influence of oxalic acid concentration,bath temperature and anodic current density on dissolution rate and coating ratio was examined,when the sulphuric acid concentration was maintained at 160g/L.It was found that chemically resistant and compact oxide layers were produced under low operational temperature （5℃） and high current densities （3A/dm^2）.A beneficial effect was observed concerning the addition of oxalic acid （18g/L）.The morphology and the composition of the anodic oxide layer were examined by scanning electron microscopy （SEM）,atomic force microscopy （AFM） and glow-discharge optical emission spectroscopy （GDOES）.展开更多
In order to clarify the dynamic process of feldspar dissolution-precipitation and explore the formation mechanism of secondary porosity,six batch reactor experiments were conducted at 200℃and pH=7 measured at room te...In order to clarify the dynamic process of feldspar dissolution-precipitation and explore the formation mechanism of secondary porosity,six batch reactor experiments were conducted at 200℃and pH=7 measured at room temperature.Temporal evolution of fluid chemistry was analyzed with an inductively coupled plasma optical emission spectrometer(ICP-OES).Solid reaction products were retrieved from six batch experiments terminated after 36,180,276,415,766 and 1008 h.Scanning electron microscopy(SEM)revealed dissolution features and significant secondary mineral adhered on the feldspar surface.The process of feldspar dissolution-precipitation proceeded slowly and full equilibrium was not achieved after 1008 h.Saturation indices suggested that the albite and K-feldspar dissolution occurred throughout the experiments.The average dissolution rates for albite and K-feldspar were 2.28×10^-10 and 8.51×10^-11 mol m^-2 s^-1,respectively.Based on the experimental data,the reaction process of alkaline feldspar was simulated and the secondary porosity had increased 0.3%after the experiment.展开更多
The dissolution behavior of delta ferrites in martensitic heat-resistant steel was studied.And the reason why the dissolution rate of delta ferrites decreased with dissolution time was discussed.The experimental resul...The dissolution behavior of delta ferrites in martensitic heat-resistant steel was studied.And the reason why the dissolution rate of delta ferrites decreased with dissolution time was discussed.The experimental results show that the chemical compositions of delta ferrites negligibly change with dissolution time.The decrease of dissolution rate of delta ferrites with dissolution time should be attributed to the change of shape and distribution of delta ferrites.The shape of delta ferrites tends to transfer from polygon to sphere with dissolution time,causing the decrease of specific surface area of delta ferrites.The distribution position of delta ferrites tends to transfer from boundaries of austenite grains to interior of austenite grains with dissolution time,decreasing the diffusion coefficient of alloy atoms.Both them decrease the dissolution rate of delta ferrites.展开更多
Sodium carbonate and carboxymethyl cellulose powders are compressed into two-component tablets with three mass ratios,97%:3%,95%:5% and 93%:7%.The dissolution tests for two-component tablets and reference pure sodium ...Sodium carbonate and carboxymethyl cellulose powders are compressed into two-component tablets with three mass ratios,97%:3%,95%:5% and 93%:7%.The dissolution tests for two-component tablets and reference pure sodium carbonate tablets are carried out at various temperatures.The dissolution process of each tablet is measured by electrical conductivity tracking method and the concentration of dissolved sodium carbonate is quanti fied with calibrated conductivity-concentration converting equation of sodium carbonate.The quanti fied dissolution data is fitted with both surface reaction model and diffusion layer model and the results clearly show that surface reaction model is suggested as the appropriate dissolution model for all measured tablets.Therefore,it is determined that carboxymethyl cellulose is a stable element to remain the dissolution mechanism of tablet unchanged.The dissolution rate constant quanti fied with surface reaction model presents that carboxymethyl cellulose-sodium carbonate two-component tablets obtain signi ficant higher dissolution rate constant than pure sodium carbonate tablet and higher proportion of carboxymethyl cellulose leads to apparent higher dissolution rate constant.The results prove for the usage of carboxymethyl cellulose in most practical applications at a relative low-level,the effect of carboxymethyl cellulose is effective and positive for two-component tablet to enhance the dissolution process and improve dissolution rate constant and this effect is speculated coming from its dynamic physical transforming process in water including dilation and conglutination.展开更多
Dissolution kinetics of sodium carbonate is investigated with the image analysis method at the approach of single particle.The dissolution experiments are carried out in an aqueous solution under a series of controlle...Dissolution kinetics of sodium carbonate is investigated with the image analysis method at the approach of single particle.The dissolution experiments are carried out in an aqueous solution under a series of controlled temperature and p H.The selected sodium carbonate particles are all spherical with the same mass and diameter.The dissolution process is quantified with the measurement of particle diameter from dissolution images.The concentration of dissolved sodium carbonate in solvent is calculated with the measured diameter of particle.Both surface reaction model and mass transport model are implemented to determine the dissolution mechanism and quantify the dissolution rate constant at each experimental condition.According to the fitting results with both two models,it is clarified that the dissolution process at the increasing temperature is controlled by the mass transport of dissolved sodium carbonate travelling from particle surface into solvent.The dissolution process at the increasing pH is controlled by the chemical reaction on particle surface.Furthermore,the dissolution rate constant for each single spherical sodium carbonate particle is quantified and the results show that the dissolution rate constant of single spherical sodium carbonate increases significantly with the rising of temperature,but decreases with the increasing of pH conversely.展开更多
Inclusion complexation between ibuprofen (IBF) and βcyclodextrin (βCD) was investigated. Phase solubility studies of the complexation suggested the formation of a 1:3 complex and a 2:3 complex between IBF and βCD a...Inclusion complexation between ibuprofen (IBF) and βcyclodextrin (βCD) was investigated. Phase solubility studies of the complexation suggested the formation of a 1:3 complex and a 2:3 complex between IBF and βCD at room temperature (23℃) and at 37℃ respectively. Solid inclusion complexes were prepared by the homogeneous coprecipitation method. Scanning electron microscopy, differential scanning calorimetry, IR spectroscopy, and Xray diffractometry were used for the characterization and evaluation of the complexes. The solubility and dissolution rate of the complexes formed were found to have improved considerably over that of the physical mixture and the drug alone, indicating that βcyclodextrin played an important role in the solubilization of ibuprofen.展开更多
Granulation is an effective method for improving the flowability of drugs, particularly when they are in needle form. Carbamazepine-hesperetin (CBZ-HPE) cocrystal is a needle-like crystal with low solubility and poor ...Granulation is an effective method for improving the flowability of drugs, particularly when they are in needle form. Carbamazepine-hesperetin (CBZ-HPE) cocrystal is a needle-like crystal with low solubility and poor flowability, which limits its application. To address this issue, this study aimed to obtain CBZ-HPE microspheres using the quasi-emulsion solvent diffusion (QESD) technique. The preparation process was monitored using polarized light microscopy, and the formation mechanism was elucidated using the radial distribution function (RDF). The microspheres were extensively characterized using PXRD, DSC, TGA, and SEM. Furthermore, the effects of surfactants, contents, and rotational speeds on the morphology and particle size distribution of microspheres were analyzed to determine the optimal experimental conditions. Based on these findings, naringenin and quercetin, the active ingredients of traditional Chinese medicine, were chosen to successfully prepare CBZ-HPE multicomponent microspheres. This research provides a foundation for increasing drug powder properties and drug conjugation through the preparation of microspheres.展开更多
AThe wastewater source of 4# tailing pond in Dexing copper mine consists of alkaline flotation pulp and acid mine drainage （AMD） from the nearby opencast mine. Therefore, the heavy metals in tailing ore are very lik...AThe wastewater source of 4# tailing pond in Dexing copper mine consists of alkaline flotation pulp and acid mine drainage （AMD） from the nearby opencast mine. Therefore, the heavy metals in tailing ore are very likely to be released due to acidification from AMD. The leaching behaviors ofZn, Cu, Fe and Mn in mine tailings from Dexing copper mine were investigated by a series of laboratory batch experiments. The effectcs ofpH, temperature, particle size and contact time on the leachability of such heavy metals were examined. It was evident that Zn, Cu, Fe and Mn were major heavy metals in the tailings while gangue minerals like quartz were major constituents in examined tailings. The tailing dissolution reaction was controlled by the acid, whose kinetics could be expressed according to the heterogeneous reaction models and explained by a shrinking core model with the surface chemical reaction as the rate-controlling step. The leachability of all metals examined depended on pH and contact time. The batch studies indicated that the maximum leaching ratios ofZn, Cu, Fe and Mn at pH 2.0 were 5.4%, 5.8%, l 1.1% and 34.1%, respectively. The dissolubility of all metals examined was positively correlated to the temperatures. The particle size would not change dissolution tendency of those heavy metals, but decrease the concentrations of leached heavy metals.展开更多
The objective of this study was to prepare and characterize paclitaxel-polyvinylpyrrolidone （PTX-PVP） solid dispersions with the intention of improving its solubility and dissolution properties. The PTX-PVP solid di...The objective of this study was to prepare and characterize paclitaxel-polyvinylpyrrolidone （PTX-PVP） solid dispersions with the intention of improving its solubility and dissolution properties. The PTX-PVP solid dispersion systems were prepared by solvent method. The release rate ofpaclitaxel was determined from dissolution studies and the physicochemical properties of solid dispersion were investigated by differential scanning calorimetry （DSC）, powder X-ray diffraction （PXRD） and scanning electron microscopy （SEM）. The cytotoxicities ofpaclitaxel in solid dispersion to the SKOV-3 cells were assayed by a SRB staining method. The results showed that the solubility and dissolution rate of paclitaxel were significantly improved in solid dispersion system compared with that of the pure drug and physical mixture. The results of DSC and PXRD showed that the paclitaxel in solid dispersion was amorphous form. No paclitaxel crystals in the solid dispersions was found during SEM analysis. Cytotoxicity study suggested that the inhibitory rates of PTX-PVP solid dispersion to SKOV-3 cells were higher than that of pure paclitaxel. The solubility and dissolution of paclitaxel were improved by solid dispersion technique. In vitro cytotoxicity of paclitaxel in solid dispersion was higher than that of pure drug.展开更多
Aim The objective of this study was to prepare and characterize quercetin-polyvinylpyrrolidone （Qurc-PVP） solid dispersion with the intention of improving its dissolution properties, Methods Qurc-PVP sclid dispersio...Aim The objective of this study was to prepare and characterize quercetin-polyvinylpyrrolidone （Qurc-PVP） solid dispersion with the intention of improving its dissolution properties, Methods Qurc-PVP sclid dispersion was prepared by solvent method. The release rate of quercetin was determined from dissolution studies and the physicochemical properties of solid dispersion were investigated by differential scanning calorimetry （DSC）, infrared spectroscopy （IR）, powder X-ray diffraction （PXRD） and scanning electron microscopy （SEM）. Results The results showed that the dissolution rate of quercetin was significantly improved by solid dispersion compared to that of the pure drug and physical mixture, Solubility studies revealed a markedly increase in the solubility of quercetin. The results of DSC and PXRD showed that the quercetin in solid dispersion was amorphous form. From SEM analysis, there was no quercetin crystal observed in the solid dispersions. Conclusion The solubility and dissolution of quercetin were improved by solid dispersion technique.展开更多
Techniques of rotating-disk and catalyst were used in investigating the kinetics of dolomite dissolution in flowing CO2-H2O system. Experiments run in the solutions equilibrated with various CO2 partial pressures (PCO...Techniques of rotating-disk and catalyst were used in investigating the kinetics of dolomite dissolution in flowing CO2-H2O system. Experiments run in the solutions equilibrated with various CO2 partial pressures (PCO2) from 30 to 100000 Pa. It shows that dissolution rates ofdolomite are related with rotating speeds at conditions far from equilibrium. This was explained by modified diffusion boundary layer (DBL) model. In addition, the dissolution rates increase after addition of carbonic anhydrase (CA) to solutions, where the CA catalyzes CO2 conversion. However, great differences occur among various CO2 partial pressures. The experimental observations give a conclusion that the modified DBL model enables one to predict dissolution rates and their behaviour at various PCO2 with satisfactory precision at least far from equilibrium.展开更多
In the present study,Form I,Form II and Form III of agomelatine were prepared to investigate the variability of polymorphs,then the in-vitro in-vivo correlation were established.The presence of three polymorphs of ago...In the present study,Form I,Form II and Form III of agomelatine were prepared to investigate the variability of polymorphs,then the in-vitro in-vivo correlation were established.The presence of three polymorphs of agomelatine was corroborated through studies by XRPD,TGA and DSC.All the forms obtained were then subjected to the powder and intrinsic dissolution tests.The IDR ranked in the order of Form III>Form I>Form II.Form I and Form III both underwent solvent-mediated phase transformation(SMPT)to Form II during dissolution and the transition points were 62 and 45 min,respectively.Pharmacokinetic profiles were acquired after oral administration of tablets,showing that the ka and AUC0e12 h of Form I,Form II,Form III were 0.580.11,0.340.05,0.740.07 h1 and 296.2549.39,186.0545.93,331.1654.74 ng*h/ml,respectively.Good linearities between IDR and ka,IDR and AUC were established,suggesting that the agomelatine polymorphic forms with faster dissolution rates in-vitro would increase the rate and extent of oral absorption in-vivo.These results demonstrated that IDR was predictive in estimating the relative bioavailability of agomelatine polymorphic forms.展开更多
In current study,immediate release solid dispersion(SD)formulation of antiulcer drug lafutidine(LAFT)was developed using hot melt extrusion(HME)technique.Amphiphilic Soluplusused as a primary solubilizing agent,with ...In current study,immediate release solid dispersion(SD)formulation of antiulcer drug lafutidine(LAFT)was developed using hot melt extrusion(HME)technique.Amphiphilic Soluplusused as a primary solubilizing agent,with different concentrations of selected surfactants like PEG 400,Lutrol F127(LF127),Lutrol F68(LF68)were used to investigate their influence on formulations processing via HME.Prepared amorphous glassy solid dispersion was found to be thermodynamically and physicochemically stable.On the contrary,traces of crystalline LAFT not observed in the extrudates according to differential scanning calorimetry(DSC),X-ray diffraction(XRD),scanning electron microscopy(SEM)and Raman spectroscopy.Raman micro spectrometry had the lowest detection limit of LAFT crystals compared with XRD and DSC.Atomic Force microscopy(AFM)studies revealed drugpolymer molecular miscibility and surface interaction at micro level.1HeCOSY NMR spectroscopy confirmed miscibility and interaction between LAFT and Soluplus,with chemical shift drifting and line broadening.MD simulation studies using computational modelling showed intermolecular interaction between molecules.Dissolution rate and solubility of LAFT was enhanced remarkably in developed SD systems.Optimized ratio of polymer and surfactants played crucial role in dissolution rate enhancement of LAFT SD.The obtained results suggested that developed LAFT has promising potential for oral delivery and might be an efficacious approach for enhancing the therapeutic potential of LAFT.展开更多
The nanoparticles of the hydrophobic drug of danazol with narrow size distribution are facilely prepared by controlled high-gravity anti-solvent precipitation （HGAP） process. Intensified micromixing and uniform nucl...The nanoparticles of the hydrophobic drug of danazol with narrow size distribution are facilely prepared by controlled high-gravity anti-solvent precipitation （HGAP） process. Intensified micromixing and uniform nucleation environment are created by the high-gravity equipment （rotating packed bed） in carrying out the anti-solvent precipitation process to produce nanoparticles. The average particle size decreases from 55 μm of the raw danazol to 190 nm of the nanoparticles. The Brunauer-Emmett-Teller （BET） surface area sharply increases from 0.66 m^2·g^-1 to 15.08 m^2·g^-l. Accordingly, the dissolution rate is greatly improved. The molecular state, chemical composition, and crystal form of the danazol nanoparticles remains unchanged after processing according to Fourier transform infrared （FTIR） and X-ray diffraction （XRD）, The high recovery ratio and continuous production capacity are highly appreciated in industry. Therefore, the HGAP method might offer a general and facile platform for mass production of hydrophobic pharmaceutical danazol particles in nanometer range.展开更多
基金supported by the National Natural Science Foundation of China(52272022)the Special Project of Central Government for Local Science and Technology Development of Hubei Province(2019ZYYD076)the Innovation and Entrepreneurship Fund of Wuhan University of Science and Technology(D202202171045002669).
文摘The dissolution of alumina-based refractory ceramics in CaO-Al2O3-SiO_(2)slag melts was performed based on the in-situ observation system of an ultra-high-temperature laser confocal microscope,and the effect of the CaO/SiO_(2)slag mass ratio(C/S ratio)on the dissolution rate of alumina-based refractory ceramics was investigated.The results indicate that the dissolution rate increases with an increase of the C/S ratio and is mainly controlled by diffusion.During the early stage of dissolution,for all C/S ratios,the dissolution process conforms to the classical invariant interface approximation model.During the later stage of dissolution,when the C/S ratio is≥6,the dissolution process is significantly different from the model above because of the formation of a thick interfacial layer,which can be explained by dissolution kinetics.
基金Projects(51101104,51072121) supported by the National Natural Science Foundation of ChinaProject(LS2010109) supported by the Key Laboratory Foundation of Liaoning Province,China
文摘Determination of dissolution rate of alumina is one of the classical problems in aluminum electrolysis. A novel method which can measure the dissolution rate of alumina was presented. Effect of factors on dissolution rate of alumina was studied intuitively and roundly using transparent quartz electrobath and image analysis techniques. Images about dissolution process of alumina were taken at an interval of fixed time from transparent quartz electrobath of double rooms. Gabor wavelet transforms were used for extracting and describing the texture features of each image. After subsampling several times, the dissolution rate of alumina was computed using these texture features in local neighborhood of samples. Regression equation of the dissolution rate of alumina was obtained using these dissolution rates. Experiments show that the regression equation of the dissolution rate of alumina is y=-0.000 5x^3＋0.024 0x^2-0.287 3x＋ 1.276 7 for Na3AIF6-AIF3-Al2O3-CaF2-LiF- MgF2 system at 920 ℃.
文摘Aim To study the effect of complexation with hydroxylpropyl-β-cyclodextrin(HP-β-CD) on the solubility, dissolution rate and chemical stability of prostaglandin E_1 (PGE_1) ,thereby providing a basis for preparing a stable solid or aqueous preparation of PGE_1 formulatedwith HP-β-CD. Methods The effect of HP-β-CD on the solubility of PGE_1 was studied by phasesolubility method. The formation of inclusion complexes of PGE_1 with HP-β-CD in the aqueoussolution was confirmed by UV spectra, circular dichroism spectroscopy, and that in the solid stateby IR spectra and X-ray diffractome-try. An solid inclusion complex of PGE_1 with HP-β-CD wasprepared by lyophilization. The dissolution rate and stability of the inclusion complex weredetermined and compared with those of PGE_1 alone. Meanwhile, the stability of PGE_1 aqueoussolutions in the presence of HP-β-CD was studied under different pH conditions. Results Thesolubility of PGE_1 increased linearly with increasing HP-β-CD concentration in various pH bufferedsolutions, showing typical A_L-type phase solubility diagrams. The stability and dissolution rateof the solid inclusion complex of PGE_1 were significantly increased, compared with those of purePGE_1 . The stability of PGE_1 in HP-β-CD solutions was also obviously improved under acidic andbasic conditions, but the stabilizing effect was absent under neutral conditions. Conclusions Thesolubility,dissolution rate and chemical stability of PGE_1 are markedly improved by complexationwith HP-β-CD: It is quite possible to prepare a stable PGE_1 inclusion complex-containing soliddosage forms, but almost impossible to obtain a stable aqueous preparation of PGE_1 formulated withHP-β-CD.
文摘The effects of re-crystallization of prednisolone as a poorly water-soluble drug in aqueous surfactant solutions on its dissolution rate were investigated. A significant enhancement was observed for crystal dissolution rate in hydrophilic surfactants such as tween 80 and sodium lauryl sulfate （SLS）. Differential scanning calorimetry （DSC） and Fourier transform infrared spectroscopy （FT-IR） indicated the existence of both form Ⅰ and Ⅱ ofprednisolone in SLS treated crystals. The FT-IR results also showed that, only form Ⅱ could be detected in prednisolone crystals without surfactant and prednisolone form Ⅲ was produced in tween 80 treated crystals. These results were also confirmed by X-ray （XRD） diffraction and scanning electron microscopy （SEM）. In general, the results indicated that the presence of hydrophilic surfactants could generate forms Ⅱ and Ⅲ of the crystals. These forms would give rlse to the increase of prednisolone＇s dissolution rate owing to their physicochemical instability and more hydrophilic property in comparison with stable polymorph of form Ⅰ.
基金National Natural Science Foundation of China(grant No.22068002 and 22178054)Training plan for academic and technical leaders of major disciplines in Jiangxi Province-Youth Talent Project(grant No.20212BCj23001)+1 种基金Jiangxi Provincial Natural Science Foundation(grant No.20224ACB213007,20212ACB203002,and 20232BBH80015)Jiangxi Province Key Laboratory of Synthetic Chemistry(grant No.JXSC202209).
文摘Carbamazepine(CBZ)is an anticonvulsant with very low water solubility,presenting as a white crystalline powder with poor mechanical properties and is hard to bend.To enhance CBZ's physicochemical properties,such as water solubility and mechanical properties,we selected six cocrystal coformers(CCFs):nicotinamide(NIC),benzamide(BZM),salicylic acid(SCA),fumaric acid(FMA),trimesic acid(TMA),and hesperetin(HPE).Six CBZ cocrystals were successfully prepared using the solution method.Fourier transform infrared spectroscopy(FT-IR),powder X-ray diffraction(PXRD),differential scanning calorimetry(DSC),and single crystal X-ray diffraction(SCXRD)were used to characterize the crystal structures and gain comprehensive insights into the six cocrystals.The mechanical,fluorescence,and solubility properties of the six cocrystals were tested.The results reveal that most of the prepared cocrystals exhibit improved water solubility and mechanical properties when compared to CBZ.Among them,the dissolution rate of cocrystals excluded from CBZ-HPE has increased by an average of 3 or 4 times compared to CBZ,while CBZ-HPE exhibits superior mechanical properties.Moreover,all six cocrystals possess better fluorescence performance than CBZ.We thoroughly evaluated the mechanical properties of the cocrystals through both experimental and theoretical approaches.This work provides a new direction for studying drug cocrystals to improve the physicochemical properties of drugs.
基金supported by the National Basic Research Program of China (973 Program) (No. 2009CB421006)the State Key Laboratory of Geological Processes and Mineral Resources (No. GPMR200843)
文摘The calcite dissolution rates at 50-250 ℃ and 20 MPa in deionized water with flow rate varying from 0.2 to 5 mL/min were experimentally measured in a continuous flow column pressure vessel reactor. Equilibrium concentration （Ceq） of calcite dissolution in deionized water at 20 MPa was determined using dissolution data according to the iterative method presented by Jeschke and Dreybrodt. The equilibrium concentrations at 50, 100, 150, 200 and 250 ℃ are 1.84×10^-4, 2.23×10^-4, 2.25×10^-4, 2.31×10^-4 and 2.24×10^-4 mol/L, respectively. The Ceq increases first and then decreases with temperature varying from 50 to 250 ℃ at 20 MPa, and the same variation trend occurs at 10 MPa with lower values. The maximum value （or extremum） of Ceq would increase with temperature at constant pressures. The dissolution reaction of calcite in this experiment is approaching the calcite equilibrium, and the reaction order doesn＇t keep a constant at different temperatures, which could imply that a change of the reac- tion mechanism was occurring. The Arrhenius equation shouldn＇t be used to calculate apparent activation energy using rate constant data at different temperatures when the reaction order or reaction mechanism changed.
文摘Chemically resistant anodic oxide layers were formed on pure aluminum substrates in oxalic acid-sulphuric acid bath.Acid dissolution tests of the obtained anodic layers were achieved in accordance with the ASTM B 680-80 specifications：35mL/L 85% H3PO4＋20g/L CrO3 at 38℃.Influence of oxalic acid concentration,bath temperature and anodic current density on dissolution rate and coating ratio was examined,when the sulphuric acid concentration was maintained at 160g/L.It was found that chemically resistant and compact oxide layers were produced under low operational temperature （5℃） and high current densities （3A/dm^2）.A beneficial effect was observed concerning the addition of oxalic acid （18g/L）.The morphology and the composition of the anodic oxide layer were examined by scanning electron microscopy （SEM）,atomic force microscopy （AFM） and glow-discharge optical emission spectroscopy （GDOES）.
基金supported by the National Science and Technology Major Project ‘‘Bohai Bay Basin deep oil and gas geology and reserves increasing direction’’ (No. 2016ZX05006007)the National Natural Fund (Youth) ‘‘Relationship between rich feldspar sandstone reservoirs in feldspar alteration and pyrolysis of hydrocarbons’’ (41602138)
文摘In order to clarify the dynamic process of feldspar dissolution-precipitation and explore the formation mechanism of secondary porosity,six batch reactor experiments were conducted at 200℃and pH=7 measured at room temperature.Temporal evolution of fluid chemistry was analyzed with an inductively coupled plasma optical emission spectrometer(ICP-OES).Solid reaction products were retrieved from six batch experiments terminated after 36,180,276,415,766 and 1008 h.Scanning electron microscopy(SEM)revealed dissolution features and significant secondary mineral adhered on the feldspar surface.The process of feldspar dissolution-precipitation proceeded slowly and full equilibrium was not achieved after 1008 h.Saturation indices suggested that the albite and K-feldspar dissolution occurred throughout the experiments.The average dissolution rates for albite and K-feldspar were 2.28×10^-10 and 8.51×10^-11 mol m^-2 s^-1,respectively.Based on the experimental data,the reaction process of alkaline feldspar was simulated and the secondary porosity had increased 0.3%after the experiment.
基金Funded by the National Natural Science Foundation of China(No.51701100)the China Postdoctoral Science Foundation(No.2020T130552)the Science and Technology Support Plan for Youth Innovation of Colleges in Shandong Province。
文摘The dissolution behavior of delta ferrites in martensitic heat-resistant steel was studied.And the reason why the dissolution rate of delta ferrites decreased with dissolution time was discussed.The experimental results show that the chemical compositions of delta ferrites negligibly change with dissolution time.The decrease of dissolution rate of delta ferrites with dissolution time should be attributed to the change of shape and distribution of delta ferrites.The shape of delta ferrites tends to transfer from polygon to sphere with dissolution time,causing the decrease of specific surface area of delta ferrites.The distribution position of delta ferrites tends to transfer from boundaries of austenite grains to interior of austenite grains with dissolution time,decreasing the diffusion coefficient of alloy atoms.Both them decrease the dissolution rate of delta ferrites.
基金the Institute of Particle and Science Engineering,University of Leeds and Procter & Gamble Newcastle Innovation Centre(UK) for partially funding the project
文摘Sodium carbonate and carboxymethyl cellulose powders are compressed into two-component tablets with three mass ratios,97%:3%,95%:5% and 93%:7%.The dissolution tests for two-component tablets and reference pure sodium carbonate tablets are carried out at various temperatures.The dissolution process of each tablet is measured by electrical conductivity tracking method and the concentration of dissolved sodium carbonate is quanti fied with calibrated conductivity-concentration converting equation of sodium carbonate.The quanti fied dissolution data is fitted with both surface reaction model and diffusion layer model and the results clearly show that surface reaction model is suggested as the appropriate dissolution model for all measured tablets.Therefore,it is determined that carboxymethyl cellulose is a stable element to remain the dissolution mechanism of tablet unchanged.The dissolution rate constant quanti fied with surface reaction model presents that carboxymethyl cellulose-sodium carbonate two-component tablets obtain signi ficant higher dissolution rate constant than pure sodium carbonate tablet and higher proportion of carboxymethyl cellulose leads to apparent higher dissolution rate constant.The results prove for the usage of carboxymethyl cellulose in most practical applications at a relative low-level,the effect of carboxymethyl cellulose is effective and positive for two-component tablet to enhance the dissolution process and improve dissolution rate constant and this effect is speculated coming from its dynamic physical transforming process in water including dilation and conglutination.
基金the Institute of Particle and Science Engineering,University of Leeds and Procter&Gamble Newcastle Innovation Centre(UK)for partially funding the project
文摘Dissolution kinetics of sodium carbonate is investigated with the image analysis method at the approach of single particle.The dissolution experiments are carried out in an aqueous solution under a series of controlled temperature and p H.The selected sodium carbonate particles are all spherical with the same mass and diameter.The dissolution process is quantified with the measurement of particle diameter from dissolution images.The concentration of dissolved sodium carbonate in solvent is calculated with the measured diameter of particle.Both surface reaction model and mass transport model are implemented to determine the dissolution mechanism and quantify the dissolution rate constant at each experimental condition.According to the fitting results with both two models,it is clarified that the dissolution process at the increasing temperature is controlled by the mass transport of dissolved sodium carbonate travelling from particle surface into solvent.The dissolution process at the increasing pH is controlled by the chemical reaction on particle surface.Furthermore,the dissolution rate constant for each single spherical sodium carbonate particle is quantified and the results show that the dissolution rate constant of single spherical sodium carbonate increases significantly with the rising of temperature,but decreases with the increasing of pH conversely.
文摘Inclusion complexation between ibuprofen (IBF) and βcyclodextrin (βCD) was investigated. Phase solubility studies of the complexation suggested the formation of a 1:3 complex and a 2:3 complex between IBF and βCD at room temperature (23℃) and at 37℃ respectively. Solid inclusion complexes were prepared by the homogeneous coprecipitation method. Scanning electron microscopy, differential scanning calorimetry, IR spectroscopy, and Xray diffractometry were used for the characterization and evaluation of the complexes. The solubility and dissolution rate of the complexes formed were found to have improved considerably over that of the physical mixture and the drug alone, indicating that βcyclodextrin played an important role in the solubilization of ibuprofen.
基金supported by National Natural Science Foundation of China(grant Nos.22068002 and 22178054)Jiangxi ProvincialNatural Science Foundation(grant Nos.20224ACB213007_and 20232BBH80015)Jiangxi Province Key Laboratory of Synthetic Chemistry(grant No.JXSC202209).
文摘Granulation is an effective method for improving the flowability of drugs, particularly when they are in needle form. Carbamazepine-hesperetin (CBZ-HPE) cocrystal is a needle-like crystal with low solubility and poor flowability, which limits its application. To address this issue, this study aimed to obtain CBZ-HPE microspheres using the quasi-emulsion solvent diffusion (QESD) technique. The preparation process was monitored using polarized light microscopy, and the formation mechanism was elucidated using the radial distribution function (RDF). The microspheres were extensively characterized using PXRD, DSC, TGA, and SEM. Furthermore, the effects of surfactants, contents, and rotational speeds on the morphology and particle size distribution of microspheres were analyzed to determine the optimal experimental conditions. Based on these findings, naringenin and quercetin, the active ingredients of traditional Chinese medicine, were chosen to successfully prepare CBZ-HPE multicomponent microspheres. This research provides a foundation for increasing drug powder properties and drug conjugation through the preparation of microspheres.
基金Projects(41073060,21007009)supported by the National Natural Science Foundation of China"Chen Guang" project(10CG34)supported by Shanghai Municipal Education Commission and Shanghai Education Development Foundation,ChinaProjects(20100075120010,20100075110010)supported by Research Fund for the Doctoral Program of Higher Education of China
文摘AThe wastewater source of 4# tailing pond in Dexing copper mine consists of alkaline flotation pulp and acid mine drainage （AMD） from the nearby opencast mine. Therefore, the heavy metals in tailing ore are very likely to be released due to acidification from AMD. The leaching behaviors ofZn, Cu, Fe and Mn in mine tailings from Dexing copper mine were investigated by a series of laboratory batch experiments. The effectcs ofpH, temperature, particle size and contact time on the leachability of such heavy metals were examined. It was evident that Zn, Cu, Fe and Mn were major heavy metals in the tailings while gangue minerals like quartz were major constituents in examined tailings. The tailing dissolution reaction was controlled by the acid, whose kinetics could be expressed according to the heterogeneous reaction models and explained by a shrinking core model with the surface chemical reaction as the rate-controlling step. The leachability of all metals examined depended on pH and contact time. The batch studies indicated that the maximum leaching ratios ofZn, Cu, Fe and Mn at pH 2.0 were 5.4%, 5.8%, l 1.1% and 34.1%, respectively. The dissolubility of all metals examined was positively correlated to the temperatures. The particle size would not change dissolution tendency of those heavy metals, but decrease the concentrations of leached heavy metals.
文摘The objective of this study was to prepare and characterize paclitaxel-polyvinylpyrrolidone （PTX-PVP） solid dispersions with the intention of improving its solubility and dissolution properties. The PTX-PVP solid dispersion systems were prepared by solvent method. The release rate ofpaclitaxel was determined from dissolution studies and the physicochemical properties of solid dispersion were investigated by differential scanning calorimetry （DSC）, powder X-ray diffraction （PXRD） and scanning electron microscopy （SEM）. The cytotoxicities ofpaclitaxel in solid dispersion to the SKOV-3 cells were assayed by a SRB staining method. The results showed that the solubility and dissolution rate of paclitaxel were significantly improved in solid dispersion system compared with that of the pure drug and physical mixture. The results of DSC and PXRD showed that the paclitaxel in solid dispersion was amorphous form. No paclitaxel crystals in the solid dispersions was found during SEM analysis. Cytotoxicity study suggested that the inhibitory rates of PTX-PVP solid dispersion to SKOV-3 cells were higher than that of pure paclitaxel. The solubility and dissolution of paclitaxel were improved by solid dispersion technique. In vitro cytotoxicity of paclitaxel in solid dispersion was higher than that of pure drug.
文摘Aim The objective of this study was to prepare and characterize quercetin-polyvinylpyrrolidone （Qurc-PVP） solid dispersion with the intention of improving its dissolution properties, Methods Qurc-PVP sclid dispersion was prepared by solvent method. The release rate of quercetin was determined from dissolution studies and the physicochemical properties of solid dispersion were investigated by differential scanning calorimetry （DSC）, infrared spectroscopy （IR）, powder X-ray diffraction （PXRD） and scanning electron microscopy （SEM）. Results The results showed that the dissolution rate of quercetin was significantly improved by solid dispersion compared to that of the pure drug and physical mixture, Solubility studies revealed a markedly increase in the solubility of quercetin. The results of DSC and PXRD showed that the quercetin in solid dispersion was amorphous form. From SEM analysis, there was no quercetin crystal observed in the solid dispersions. Conclusion The solubility and dissolution of quercetin were improved by solid dispersion technique.
基金the National Natural Science Foundation of China (Grant No.40073026), the Ministry of Land and Resources of China (Grant No. 9806), the Ministry of Science and Technology of China (Special Research Project for Social Commonweal) (Grant No. 164), the Na
文摘Techniques of rotating-disk and catalyst were used in investigating the kinetics of dolomite dissolution in flowing CO2-H2O system. Experiments run in the solutions equilibrated with various CO2 partial pressures (PCO2) from 30 to 100000 Pa. It shows that dissolution rates ofdolomite are related with rotating speeds at conditions far from equilibrium. This was explained by modified diffusion boundary layer (DBL) model. In addition, the dissolution rates increase after addition of carbonic anhydrase (CA) to solutions, where the CA catalyzes CO2 conversion. However, great differences occur among various CO2 partial pressures. The experimental observations give a conclusion that the modified DBL model enables one to predict dissolution rates and their behaviour at various PCO2 with satisfactory precision at least far from equilibrium.
基金The authors acknowledge the financial support received from the National Science and Technology Major Projects for Major New Drugs Innovation and Development of China(No.2009ZX09501-022).
文摘In the present study,Form I,Form II and Form III of agomelatine were prepared to investigate the variability of polymorphs,then the in-vitro in-vivo correlation were established.The presence of three polymorphs of agomelatine was corroborated through studies by XRPD,TGA and DSC.All the forms obtained were then subjected to the powder and intrinsic dissolution tests.The IDR ranked in the order of Form III>Form I>Form II.Form I and Form III both underwent solvent-mediated phase transformation(SMPT)to Form II during dissolution and the transition points were 62 and 45 min,respectively.Pharmacokinetic profiles were acquired after oral administration of tablets,showing that the ka and AUC0e12 h of Form I,Form II,Form III were 0.580.11,0.340.05,0.740.07 h1 and 296.2549.39,186.0545.93,331.1654.74 ng*h/ml,respectively.Good linearities between IDR and ka,IDR and AUC were established,suggesting that the agomelatine polymorphic forms with faster dissolution rates in-vitro would increase the rate and extent of oral absorption in-vivo.These results demonstrated that IDR was predictive in estimating the relative bioavailability of agomelatine polymorphic forms.
基金The author is also thankful to UGC(SAP)for providing the research fellowship and Institute of Chemical Technology,ELITE status(Mumbai,India)for providing all facilities and guidance.The authors are thankful to S.A.I.F.department at Indian Institute of Technology,Mumbai for Raman and 1HeCOSY NMR experimental help and analyses.
文摘In current study,immediate release solid dispersion(SD)formulation of antiulcer drug lafutidine(LAFT)was developed using hot melt extrusion(HME)technique.Amphiphilic Soluplusused as a primary solubilizing agent,with different concentrations of selected surfactants like PEG 400,Lutrol F127(LF127),Lutrol F68(LF68)were used to investigate their influence on formulations processing via HME.Prepared amorphous glassy solid dispersion was found to be thermodynamically and physicochemically stable.On the contrary,traces of crystalline LAFT not observed in the extrudates according to differential scanning calorimetry(DSC),X-ray diffraction(XRD),scanning electron microscopy(SEM)and Raman spectroscopy.Raman micro spectrometry had the lowest detection limit of LAFT crystals compared with XRD and DSC.Atomic Force microscopy(AFM)studies revealed drugpolymer molecular miscibility and surface interaction at micro level.1HeCOSY NMR spectroscopy confirmed miscibility and interaction between LAFT and Soluplus,with chemical shift drifting and line broadening.MD simulation studies using computational modelling showed intermolecular interaction between molecules.Dissolution rate and solubility of LAFT was enhanced remarkably in developed SD systems.Optimized ratio of polymer and surfactants played crucial role in dissolution rate enhancement of LAFT SD.The obtained results suggested that developed LAFT has promising potential for oral delivery and might be an efficacious approach for enhancing the therapeutic potential of LAFT.
基金Supported by the National High Technology Research and Development Program of China (2006AA030202)the Talent Training Program of Beijing (2007B022)
文摘The nanoparticles of the hydrophobic drug of danazol with narrow size distribution are facilely prepared by controlled high-gravity anti-solvent precipitation （HGAP） process. Intensified micromixing and uniform nucleation environment are created by the high-gravity equipment （rotating packed bed） in carrying out the anti-solvent precipitation process to produce nanoparticles. The average particle size decreases from 55 μm of the raw danazol to 190 nm of the nanoparticles. The Brunauer-Emmett-Teller （BET） surface area sharply increases from 0.66 m^2·g^-1 to 15.08 m^2·g^-l. Accordingly, the dissolution rate is greatly improved. The molecular state, chemical composition, and crystal form of the danazol nanoparticles remains unchanged after processing according to Fourier transform infrared （FTIR） and X-ray diffraction （XRD）, The high recovery ratio and continuous production capacity are highly appreciated in industry. Therefore, the HGAP method might offer a general and facile platform for mass production of hydrophobic pharmaceutical danazol particles in nanometer range.
