Under the same aerodynamic load,the load transmitted by the kick-reaction link actuator to the aircraft structure is only 1/5 to 1/3 of that of the point-to-point actuator,which can significantly reduce the weight of ...Under the same aerodynamic load,the load transmitted by the kick-reaction link actuator to the aircraft structure is only 1/5 to 1/3 of that of the point-to-point actuator,which can significantly reduce the weight of the structure,and is widely used in the main flight control surface of large and medium-sized civil airliners.In order to restrain the flutter of aircraft rudder surface,it is necessary to design the servo stiffness of the kick-reaction link actuator in the development stage,so that it can meet the dynamic stiffness requirement within the frequency range.Taking the actuator of a civil airliner as the research object,the dynamic stiffness modeling of elevator actuator is carried out on MATLAB platform,and the dynamic stiffness test is carried out to verify the correctness of dynamic stiffness modeling.The simulation and test results show that the actuator can meet the dynamic stiffness design requirements.展开更多
The control law design for a near-space hypersonic vehicle（NHV） is highly challenging due to its inherent nonlinearity,plant uncertainties and sensitivity to disturbances.This paper presents a novel functional link ...The control law design for a near-space hypersonic vehicle（NHV） is highly challenging due to its inherent nonlinearity,plant uncertainties and sensitivity to disturbances.This paper presents a novel functional link network（FLN） control method for an NHV with dynamical thrust and parameter uncertainties.The approach devises a new partially-feedback-functional-link-network（PFFLN） adaptive law and combines it with the nonlinear generalized predictive control（NGPC） algorithm.The PFFLN is employed for approximating uncertainties in flight.Its weights are online tuned based on Lyapunov stability theorem for the first time.The learning process does not need any offline training phase.Additionally,a robust controller with an adaptive gain is designed to offset the approximation error.Finally,simulation results show a satisfactory performance for the NHV attitude tracking,and also illustrate the controller＇s robustness.展开更多
In order to test the anti-interference ability of an Unmanned Aerial Vehicle(UAV) data link in a complex electromagnetic environment,a method for simulating the dynamic electromagnetic interference of an indoor wirele...In order to test the anti-interference ability of an Unmanned Aerial Vehicle(UAV) data link in a complex electromagnetic environment,a method for simulating the dynamic electromagnetic interference of an indoor wireless environment is proposed.This method can estimate the relational degree between the actual face of an UAV data link in an interface environment and the simulation scenarios in an anechoic chamber by using the Grey Relational Analysis(GRA) theory.The dynamic drive of the microwave instrument produces a real-time corresponding interference signal and realises scene mapping.The experimental results show that the maximal correlation between the interference signal in the real scene and the angular domain of the radiation antenna in the anechoic chamber is 0.959 3.Further,the relational degree of the Signal-toInterference Ratio(SIR) of the UAV at its reception terminal indoors and in the anechoic chamber is 0.996 8,and the time of instrument drive is only approximately 10 μs.All of the above illustrates that this method can achieve a simulation close to a real field dynamic electromagnetic interference signal of an indoor UAV data link.展开更多
The object of study is about dynamic modeling and control for a 2degree-of-freedom (DOF) planar parallel mechanism (PM) with flexible links. The kinematic anddynamic equations are established according to the characte...The object of study is about dynamic modeling and control for a 2degree-of-freedom (DOF) planar parallel mechanism (PM) with flexible links. The kinematic anddynamic equations are established according to the characteristics of mixed rigid and flexiblestructure. By using the singular perturbation approach (SPA), the model of the mechanism can beseparated into slow and fast subsystems. Based on the feedback linearization theory and inputshaping technique, the large scale rigid motion controller and the flexible link vibrationcontroller can be designed separately to achieve fast and accurate positioning of the PM.展开更多
To establish an efficient inter-satellite link (ISL) in an LEO network, the effect of geometric characteristics of ISL on the ISLs and the devices on the LEO satellite should be examined. Because of the continuous mov...To establish an efficient inter-satellite link (ISL) in an LEO network, the effect of geometric characteristics of ISL on the ISLs and the devices on the LEO satellite should be examined. Because of the continuous movement of the LEO satellite, the time-varying behaviours of the ISL's geometric charactersistics continuously change with the changes of the satellite's position on the orbit. These dynamic geometric characteristics of the ISLs are important for ISL's performance analyzing and the design of the devices on the LEO satellite. This paper describes dynamic geometric characteristics of ISL, analyzes the impact of these regulations on the tracking system of the satellite's antenna and the power adjusting system of the satellite's transmitter, with the Iridium system as an example.展开更多
The paper deals with the dynamic response prediction of the composite structure,which consists of two linear components coupled by some nonlinear vibration isolators. Based on the measured impulse response functions o...The paper deals with the dynamic response prediction of the composite structure,which consists of two linear components coupled by some nonlinear vibration isolators. Based on the measured impulse response functions of the linear components, three kinds of dynamic equations of interfacial integration are proposed and a procedure to transform the dynamic equations of integral type into a set of ordinary differential equations is suggested. Computer simulations and a real test are given to verify the effectiveness of the theoretical results.展开更多
The dynamics for multi-link spatial flexible manipulator arms is investigated. The system considered here is an N-flexible-link manipulator driven by N DC-motors through N revolute flexiblejoints. The flexibility of e...The dynamics for multi-link spatial flexible manipulator arms is investigated. The system considered here is an N-flexible-link manipulator driven by N DC-motors through N revolute flexiblejoints. The flexibility of each flexible joint is modeled as a linearly elastic torsional spring, and the mass of the joint is also considered. For the flexibility of the link, all of the stretching deformation, bending deformation and the torsional deformation are included. The complete governing equations of motion of the system are derived via the Lagrange equations. The nonlinear description of the deformation field of the flexible link is adopted in the dynamic modeling, and thus the dynamic stiffening effects are captured. Based on this model, a general-purpose software package for dynamic simulation of multi-link spatial flexible manipulator arms is developed. Several illustrative examples are given to validate the algorithm presented in this paper and to indicate that not only dynamic stiffening effects but also the flexibility of the structure has significant influence on the dynamic performance of the manipulator.展开更多
IntelligentPad approach provides a standard for dynamically linkable components. Based on the standard, this paper introduces an approach of developing dynamically linkable components by using object oriented techniques.
Unmanned aerial vehicles(UAVs) enable flexible networking functions in emergency scenarios.However,due to the movement characteristic of ground users(GUs),it is challenging to capture the interactions among GUs.Thus,w...Unmanned aerial vehicles(UAVs) enable flexible networking functions in emergency scenarios.However,due to the movement characteristic of ground users(GUs),it is challenging to capture the interactions among GUs.Thus,we propose a learningbased dynamic connectivity maintenance architecture to reduce the delay for the UAV-assisted device-todevice(D2D) multicast communication.In this paper,each UAV transmits information to a selected GU,and then other GUs receive the information in a multi-hop manner.To minimize the total delay while ensuring that all GUs receive the information,we decouple it into three subproblems according to the time division on the topology:For the cluster-head selection,we adopt the Whale Optimization Algorithm(WOA) to imitate the hunting behavior of whales by abstracting the UAVs and cluster-heads into whales and preys,respectively;For the D2D multi-hop link establishment,we make the best of social relationships between GUs,and propose a node mapping algorithm based on the balanced spanning tree(BST) with reconfiguration to minimize the number of hops;For the dynamic connectivity maintenance,Restricted Q-learning(RQL) is utilized to learn the optimal multicast timeslot.Finally,the simulation results show that our proposed algorithms perfor better than other benchmark algorithms in the dynamic scenario.展开更多
Cross-linked polystyrene/glass fiber composites were fabricated using cross-linked polystyrene （CLPS） as matrix and E-glass fiber as the reinforcement. Surfaces of E-glass fibers were modified by vinyl triethoxysila...Cross-linked polystyrene/glass fiber composites were fabricated using cross-linked polystyrene （CLPS） as matrix and E-glass fiber as the reinforcement. Surfaces of E-glass fibers were modified by vinyl triethoxysilane （VTES）, vinyl trimethoxysilane （VTMS） and γ-methacryloylpropyl trimethoxysilane （MPS）. The treated glass fibers were analyzed by fourier transform infrared spectroscopy （FTIR）. Dynamic mechanical thermal analysis （DMTA） and thermo-gravimetric analysis （TGA） were employed to investigate the effect of glass fibers surface modification on viscoelastic behavior and thermal properties. The morphology of fracture surfaces of various composites was observed by scanning electron microscopy （SEM）. The results revealed that these coupling agents were connected to the surfaces of the fibers by chemical bonding. Dynamic mechanical properties as well as thermal stability of the composites were improved considerablely, but to varying degrees depending on the fiber modification. The diversities of improvement of properties were attributed to the different interfacial adhesion between CLPS matrix and the glass fibers.展开更多
As the main food source for humans, the global movement of the three major grains significantly impacts human survival and development. To investigate the evolution of the world cereal trade network and its developmen...As the main food source for humans, the global movement of the three major grains significantly impacts human survival and development. To investigate the evolution of the world cereal trade network and its development trend, a weighted directed dynamic multiplexed network was established using historical data on cereal trade, cereal import dependency ratio, and arable land per capita. Inspired by the MLP framework, we redefined the weight determination method for computing layer weights and edge weights of the target layer, modified the CN, RA, AA, and PA indicators, and proposed the node similarity indicator for weighted directed networks. The AUC metric, which measures the accuracy of the algorithm, has also been improved in order to finally obtain the link prediction results for the grain trading network. The prediction results were processed, such as web-based presentation and community partition. It was found that the number of generalized trade agreements does not have a decisive impact on inter-country cereal trade. The former large grain exporters continue to play an important role in this trade network. In the future, the world trade in cereals will develop in the direction of more frequent intercontinental trade and gradually weaken the intracontinental cereal trade.展开更多
This paper is devoted to find an intelligent and safe path for two-link robotic arm in dynamic environment. This paper focuses on computational part of motion planning in completely changing dynamic environment at eve...This paper is devoted to find an intelligent and safe path for two-link robotic arm in dynamic environment. This paper focuses on computational part of motion planning in completely changing dynamic environment at every motion sample domains,?since the local minima and sharp edges are the most common problems in all path planning algorithms. In addition, finding a path solution in a dynamic environment represents a challenge for the robotics researchers,?so in this paper, a proposed mixing approach was suggested to overcome all these obstructions. The proposed approach methodology?for obtaining robot interactive path planning solution in known dynamic environment utilizes?the use of modified heuristic D-star (D*) algorithm based on the full free Cartesian space analysis at each motion sample with the Particle Swarm Optimization (PSO) technique.?Also, a modification on the?D* algorithm has been done to match the dynamic environment requirements by adding stop and return backward cases which is not included in the original D* algorithm theory. The resultant interactive path solution was computed by taking into consideration the time and position changes of the moving obstacles. Furthermore, to insure the enhancement of the?final path length optimality, the PSO technique was used.?The simulation results are given to show the effectiveness of the proposed method.展开更多
动态网络链路预测广泛的应用前景,使得其逐渐成为网络科学研究的热点.动态网络链路演化过程中具有复杂的空间相关性和时间依赖性,导致其链路预测任务极具挑战.提出一个基于时序图卷积的动态网络链路预测模型(dynamic network link predi...动态网络链路预测广泛的应用前景,使得其逐渐成为网络科学研究的热点.动态网络链路演化过程中具有复杂的空间相关性和时间依赖性,导致其链路预测任务极具挑战.提出一个基于时序图卷积的动态网络链路预测模型(dynamic network link prediction based on sequential graph convolution, DNLP-SGC).针对网络快照序列不能有效反映动态网络连续性的问题,采用边缘触发机制对原始网络权重矩阵进行修正,弥补了离散快照表示动态网络存在时序信息丢失的不足.从网络演化过程出发,综合考虑节点间的特征相似性以及历史交互信息,采用时序图卷积提取动态网络中节点的特征,该方法融合了节点时空依赖关系.进一步,采用因果卷积网络捕获网络演化过程中潜在的全局时序特征,实现动态网络链路预测.在2个真实的网络数据集上的实验结果表明,DNLP-SGC在precision, recall, AUC指标上均优于对比的基线模型.展开更多
文摘Under the same aerodynamic load,the load transmitted by the kick-reaction link actuator to the aircraft structure is only 1/5 to 1/3 of that of the point-to-point actuator,which can significantly reduce the weight of the structure,and is widely used in the main flight control surface of large and medium-sized civil airliners.In order to restrain the flutter of aircraft rudder surface,it is necessary to design the servo stiffness of the kick-reaction link actuator in the development stage,so that it can meet the dynamic stiffness requirement within the frequency range.Taking the actuator of a civil airliner as the research object,the dynamic stiffness modeling of elevator actuator is carried out on MATLAB platform,and the dynamic stiffness test is carried out to verify the correctness of dynamic stiffness modeling.The simulation and test results show that the actuator can meet the dynamic stiffness design requirements.
基金supported by the National Natural Science Foundation of China (9071602860974106)
文摘The control law design for a near-space hypersonic vehicle（NHV） is highly challenging due to its inherent nonlinearity,plant uncertainties and sensitivity to disturbances.This paper presents a novel functional link network（FLN） control method for an NHV with dynamical thrust and parameter uncertainties.The approach devises a new partially-feedback-functional-link-network（PFFLN） adaptive law and combines it with the nonlinear generalized predictive control（NGPC） algorithm.The PFFLN is employed for approximating uncertainties in flight.Its weights are online tuned based on Lyapunov stability theorem for the first time.The learning process does not need any offline training phase.Additionally,a robust controller with an adaptive gain is designed to offset the approximation error.Finally,simulation results show a satisfactory performance for the NHV attitude tracking,and also illustrate the controller＇s robustness.
基金supported by a certain Ministry Foundation under Grant No.20212HK03010
文摘In order to test the anti-interference ability of an Unmanned Aerial Vehicle(UAV) data link in a complex electromagnetic environment,a method for simulating the dynamic electromagnetic interference of an indoor wireless environment is proposed.This method can estimate the relational degree between the actual face of an UAV data link in an interface environment and the simulation scenarios in an anechoic chamber by using the Grey Relational Analysis(GRA) theory.The dynamic drive of the microwave instrument produces a real-time corresponding interference signal and realises scene mapping.The experimental results show that the maximal correlation between the interference signal in the real scene and the angular domain of the radiation antenna in the anechoic chamber is 0.959 3.Further,the relational degree of the Signal-toInterference Ratio(SIR) of the UAV at its reception terminal indoors and in the anechoic chamber is 0.996 8,and the time of instrument drive is only approximately 10 μs.All of the above illustrates that this method can achieve a simulation close to a real field dynamic electromagnetic interference signal of an indoor UAV data link.
基金This project is supported by National Natural Science Foundation of China (No.50390064, No.50375099) Doctorate Foundation of Ministry of Education of China(No.20020248048).
文摘The object of study is about dynamic modeling and control for a 2degree-of-freedom (DOF) planar parallel mechanism (PM) with flexible links. The kinematic anddynamic equations are established according to the characteristics of mixed rigid and flexiblestructure. By using the singular perturbation approach (SPA), the model of the mechanism can beseparated into slow and fast subsystems. Based on the feedback linearization theory and inputshaping technique, the large scale rigid motion controller and the flexible link vibrationcontroller can be designed separately to achieve fast and accurate positioning of the PM.
文摘To establish an efficient inter-satellite link (ISL) in an LEO network, the effect of geometric characteristics of ISL on the ISLs and the devices on the LEO satellite should be examined. Because of the continuous movement of the LEO satellite, the time-varying behaviours of the ISL's geometric charactersistics continuously change with the changes of the satellite's position on the orbit. These dynamic geometric characteristics of the ISLs are important for ISL's performance analyzing and the design of the devices on the LEO satellite. This paper describes dynamic geometric characteristics of ISL, analyzes the impact of these regulations on the tracking system of the satellite's antenna and the power adjusting system of the satellite's transmitter, with the Iridium system as an example.
文摘The paper deals with the dynamic response prediction of the composite structure,which consists of two linear components coupled by some nonlinear vibration isolators. Based on the measured impulse response functions of the linear components, three kinds of dynamic equations of interfacial integration are proposed and a procedure to transform the dynamic equations of integral type into a set of ordinary differential equations is suggested. Computer simulations and a real test are given to verify the effectiveness of the theoretical results.
基金supported by the National Natural Science Foundations of China (10772085,11272155 and 11132007)333 Project of Jiangsu Province,China(BRA2011172)NUST Research Funding,China(2011YBXM32)
文摘The dynamics for multi-link spatial flexible manipulator arms is investigated. The system considered here is an N-flexible-link manipulator driven by N DC-motors through N revolute flexiblejoints. The flexibility of each flexible joint is modeled as a linearly elastic torsional spring, and the mass of the joint is also considered. For the flexibility of the link, all of the stretching deformation, bending deformation and the torsional deformation are included. The complete governing equations of motion of the system are derived via the Lagrange equations. The nonlinear description of the deformation field of the flexible link is adopted in the dynamic modeling, and thus the dynamic stiffening effects are captured. Based on this model, a general-purpose software package for dynamic simulation of multi-link spatial flexible manipulator arms is developed. Several illustrative examples are given to validate the algorithm presented in this paper and to indicate that not only dynamic stiffening effects but also the flexibility of the structure has significant influence on the dynamic performance of the manipulator.
文摘IntelligentPad approach provides a standard for dynamically linkable components. Based on the standard, this paper introduces an approach of developing dynamically linkable components by using object oriented techniques.
基金supported by the Future Scientists Program of China University of Mining and Technology(2020WLKXJ030)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX201993).
文摘Unmanned aerial vehicles(UAVs) enable flexible networking functions in emergency scenarios.However,due to the movement characteristic of ground users(GUs),it is challenging to capture the interactions among GUs.Thus,we propose a learningbased dynamic connectivity maintenance architecture to reduce the delay for the UAV-assisted device-todevice(D2D) multicast communication.In this paper,each UAV transmits information to a selected GU,and then other GUs receive the information in a multi-hop manner.To minimize the total delay while ensuring that all GUs receive the information,we decouple it into three subproblems according to the time division on the topology:For the cluster-head selection,we adopt the Whale Optimization Algorithm(WOA) to imitate the hunting behavior of whales by abstracting the UAVs and cluster-heads into whales and preys,respectively;For the D2D multi-hop link establishment,we make the best of social relationships between GUs,and propose a node mapping algorithm based on the balanced spanning tree(BST) with reconfiguration to minimize the number of hops;For the dynamic connectivity maintenance,Restricted Q-learning(RQL) is utilized to learn the optimal multicast timeslot.Finally,the simulation results show that our proposed algorithms perfor better than other benchmark algorithms in the dynamic scenario.
基金Supported by National Natural Science Foundation of China (No.50872101,A3 Foresight Program-50821140308)National Basic Research Program of China (No.2009CB939704)a joint project of National Nature Science Foundation of China and Russian Foundation for Basic Research(No.NSFC-RFBR 51011120252)
文摘Cross-linked polystyrene/glass fiber composites were fabricated using cross-linked polystyrene （CLPS） as matrix and E-glass fiber as the reinforcement. Surfaces of E-glass fibers were modified by vinyl triethoxysilane （VTES）, vinyl trimethoxysilane （VTMS） and γ-methacryloylpropyl trimethoxysilane （MPS）. The treated glass fibers were analyzed by fourier transform infrared spectroscopy （FTIR）. Dynamic mechanical thermal analysis （DMTA） and thermo-gravimetric analysis （TGA） were employed to investigate the effect of glass fibers surface modification on viscoelastic behavior and thermal properties. The morphology of fracture surfaces of various composites was observed by scanning electron microscopy （SEM）. The results revealed that these coupling agents were connected to the surfaces of the fibers by chemical bonding. Dynamic mechanical properties as well as thermal stability of the composites were improved considerablely, but to varying degrees depending on the fiber modification. The diversities of improvement of properties were attributed to the different interfacial adhesion between CLPS matrix and the glass fibers.
文摘As the main food source for humans, the global movement of the three major grains significantly impacts human survival and development. To investigate the evolution of the world cereal trade network and its development trend, a weighted directed dynamic multiplexed network was established using historical data on cereal trade, cereal import dependency ratio, and arable land per capita. Inspired by the MLP framework, we redefined the weight determination method for computing layer weights and edge weights of the target layer, modified the CN, RA, AA, and PA indicators, and proposed the node similarity indicator for weighted directed networks. The AUC metric, which measures the accuracy of the algorithm, has also been improved in order to finally obtain the link prediction results for the grain trading network. The prediction results were processed, such as web-based presentation and community partition. It was found that the number of generalized trade agreements does not have a decisive impact on inter-country cereal trade. The former large grain exporters continue to play an important role in this trade network. In the future, the world trade in cereals will develop in the direction of more frequent intercontinental trade and gradually weaken the intracontinental cereal trade.
文摘This paper is devoted to find an intelligent and safe path for two-link robotic arm in dynamic environment. This paper focuses on computational part of motion planning in completely changing dynamic environment at every motion sample domains,?since the local minima and sharp edges are the most common problems in all path planning algorithms. In addition, finding a path solution in a dynamic environment represents a challenge for the robotics researchers,?so in this paper, a proposed mixing approach was suggested to overcome all these obstructions. The proposed approach methodology?for obtaining robot interactive path planning solution in known dynamic environment utilizes?the use of modified heuristic D-star (D*) algorithm based on the full free Cartesian space analysis at each motion sample with the Particle Swarm Optimization (PSO) technique.?Also, a modification on the?D* algorithm has been done to match the dynamic environment requirements by adding stop and return backward cases which is not included in the original D* algorithm theory. The resultant interactive path solution was computed by taking into consideration the time and position changes of the moving obstacles. Furthermore, to insure the enhancement of the?final path length optimality, the PSO technique was used.?The simulation results are given to show the effectiveness of the proposed method.
文摘动态网络链路预测广泛的应用前景,使得其逐渐成为网络科学研究的热点.动态网络链路演化过程中具有复杂的空间相关性和时间依赖性,导致其链路预测任务极具挑战.提出一个基于时序图卷积的动态网络链路预测模型(dynamic network link prediction based on sequential graph convolution, DNLP-SGC).针对网络快照序列不能有效反映动态网络连续性的问题,采用边缘触发机制对原始网络权重矩阵进行修正,弥补了离散快照表示动态网络存在时序信息丢失的不足.从网络演化过程出发,综合考虑节点间的特征相似性以及历史交互信息,采用时序图卷积提取动态网络中节点的特征,该方法融合了节点时空依赖关系.进一步,采用因果卷积网络捕获网络演化过程中潜在的全局时序特征,实现动态网络链路预测.在2个真实的网络数据集上的实验结果表明,DNLP-SGC在precision, recall, AUC指标上均优于对比的基线模型.
