Dear editor, We read with pleasure the well-designed study by Butler et al of electrical cardioversion of emergency department patients with atrial fibrillation. We appreciate their analysis of the distinctives of pro...Dear editor, We read with pleasure the well-designed study by Butler et al of electrical cardioversion of emergency department patients with atrial fibrillation. We appreciate their analysis of the distinctives of procedural sedation when employed for this indication. Understanding the dosing adjustments to propofol undertaken by their sedationists will help us more carefully evaluate our own approach to sedating patients undergoing electrical cardioversion of atrial fibrillation.展开更多
The energy bandgap is an intrinsic character of semiconductors, which largely determines their properties. The ability to continuously and reversibly tune the bandgap of a single device during real time operation is o...The energy bandgap is an intrinsic character of semiconductors, which largely determines their properties. The ability to continuously and reversibly tune the bandgap of a single device during real time operation is of great importance not only to device physics but also to technological applications. Here we demonstrate a widely tunable bandgap of few-layer black phosphorus （BP） by the application of vertical electric field in dual-gated BP field-effect transistors. A total bandgap reduction of 124 meV is observed when the electrical displacement field is increased from 0.10 V/nm to 0.83 V/nm. Our results suggest appealing potential for few-layer BP as a tunable bandgap material in infrared optoelectronies, thermoelectric power generation and thermal imaging.展开更多
Fast ionic conductors are one kind of solid state material with ionic conductivity as high as that of melten salts or liquid electrolytes.Ionic conductivity is one of the important parameters for characterizing a fast...Fast ionic conductors are one kind of solid state material with ionic conductivity as high as that of melten salts or liquid electrolytes.Ionic conductivity is one of the important parameters for characterizing a fast ionic conductor.For a long time materialists and chemists have made great efforts in search of new fast ionic conductors with high ionic conductivity.In view of structure,they have synthesised silver and copper fast ionic conductors with so called open structures.But it is not so successful for searching more applicable alkaline fast ionic conductors.Since polymer has flexibility for making thin film,it concentrates attention on the polymer-alkaline salt complex.Fenton et al.have first reported poly(ethylene oxide) (PEO)-alkaline salt complex.Later on Armard et al.have investigated the electrical property of PEO-NaSCN.展开更多
Development of graphene field effect transistors （GFETs） faces a serious challenge of graphene interface to the dielectric material. A single layer of intrinsic graphene has an average sheet resistance of the order ...Development of graphene field effect transistors （GFETs） faces a serious challenge of graphene interface to the dielectric material. A single layer of intrinsic graphene has an average sheet resistance of the order of 1-5 kΩ/□. The intrinsic nature of graphene leads to higher contact resistance yielding into the outstanding properties of the material. We design a graphene matrix with minimized sheet resistance of 0.185 kΩ/□ with Ag contacts. The developed matrices on silicon substrates provide a variety of transistor design options for subsequent fabrication. The graphene layer is developed over 400 nm nickel in such a way as to analyze hypersensitive electrical properties of the interface for exfoliation. This work identifies potential of the design in the applicability of few-layer GFETs with less process steps with the help of analyzing the effect of metal contact and post-process anneMing on its electrical fabrication.展开更多
We performed ultrasonic measurements on a quaternary cubic compound PrRu_(2)In_(2)Zn_(18) to explore the ground state properties derived from non-Kramers Γ_(3) doublet of Pr^(3+).PrRu_(2)In_(2)Zn_(18) is a quaternary...We performed ultrasonic measurements on a quaternary cubic compound PrRu_(2)In_(2)Zn_(18) to explore the ground state properties derived from non-Kramers Γ_(3) doublet of Pr^(3+).PrRu_(2)In_(2)Zn_(18) is a quaternary derivative of the ternary compound PrRu_(2)Zn_(20) that exhibits a structural phase transition at T_S=138 K.In PrRu_(2)In_(2)Zn_(18),the Zn atoms at the 16c site in PrRu_(2)Zn_(20) are selectively replaced by In atoms.A monotonic increase was observed in the temperature dependence of elastic constants C_L=(C_(11)+2C_(12)+4C_(44))/3 and C_(T)=(C_(11)-C_(12)+C_(44))/3 in the temperature range around T_(S) to which an elastic softening was observed in(C_(11)-C_(12))/2 for PrRu_(2)Zn_(20).The disappearance of the softening indicates that the structural transition in PrRu_(2)Zn_(20) is suppressed by the substitution of Zn ions by In ones with a larger ionic radius.Alternatively,the C_(T) of PrRu_(2)In_(2)Zn_(18) exhibits a precursor Curie-type elastic softening toward low temperatures being responsible for the non-Kramers Γ_(3) ground state.We discuss the ground state and the evolution of the elastic properties of the different single-crystal samples of PrRu_(2)In_(2)Zn_(18) grown under different conditions.展开更多
Dzyaloshinskii–Moriya interaction(DMI) is under extensive investigation considering its crucial status in chiral magnetic orders, such as Néel-type domain wall(DW) and skyrmions. It has been reported that the in...Dzyaloshinskii–Moriya interaction(DMI) is under extensive investigation considering its crucial status in chiral magnetic orders, such as Néel-type domain wall(DW) and skyrmions. It has been reported that the interfacial DMI originating from Rashba spin–orbit coupling(SOC) can be linearly tuned with strong external electric fields. In this work, we experimentally demonstrate that the strength of DMI exhibits rapid fluctuations, ranging from 10% to 30% of its original value, as a function of applied electric fields in Pt/Co/MgO heterostructures within the small field regime(< 10-2V/nm). Brillouin light scattering(BLS) experiments have been performed to measure DMI, and first-principles calculations show agreement with this observation, which can be explained by the variation in orbital hybridization at the Co/MgO interface in response to the weak electric fields. Our results on voltage control of DMI(VCDMI) suggest that research related to the voltage control of magnetic anisotropy for spin–orbit torque or the motion control of skyrmions might also have to consider the role of the external electric field on DMI as small voltages are generally used for the magnetoresistance detection.展开更多
Using a three-step laser saturation excitation technique, the saturation effects on the Ba 6pns （J = 1） and 6pad （J = 1, 3） autoionization spectra are observed systemically in zero field. These saturation spectra ...Using a three-step laser saturation excitation technique, the saturation effects on the Ba 6pns （J = 1） and 6pad （J = 1, 3） autoionization spectra are observed systemically in zero field. These saturation spectra are introduced to determine the high n members of 6pnl （l = 0, 2） autoionizing series and are used to analyse the channel interactions among the autoionizing series in zero field. Furthermore, the saturation excitation technique is applied to the electric field case, in which the saturation spectra of Ba 6pnk （｜M｜= 0, 1） autoionizing Stark states are measured. Most of these saturation spectra are observed for the first time so far as we know, which indicate the mixing of the autoionizing states in the electric fields.展开更多
The effect of an electric field E on a narrow quantum ring that contains two electrons and is threaded by a magnetic flux B has been investigated. Localization of the electronic distribution and suppression of the Aha...The effect of an electric field E on a narrow quantum ring that contains two electrons and is threaded by a magnetic flux B has been investigated. Localization of the electronic distribution and suppression of the AharonovBohm oscillation （ABO） are found in the two-electron ring, which are similar to those found in a one-electron ring. However, the period of ABO in a two-electron ring is reduced by half compared with that in a one-electron ring. Furthermore, during the variation of B, the persistent current of the ground state may undergo a sudden change in sign. This change is associated with a singlet-triplet transition and has no counterpart in one-electron rings. For a given E, there exists a threshold of energy. When the energy of the excited state exceeds the threshold, the localization would disappear and the ABO would recover. The value of the threshold is proportional to the magnitude of E. Once the threshold is exceeded, the persistent current is much stronger than the current of the ground state at E=0.展开更多
As an important component of nanodevices and nanomachine constructions, the mechanical performance of nanowires （NWs） has been a subject of intense research efforts due to gaining relevance in controlling functional...As an important component of nanodevices and nanomachine constructions, the mechanical performance of nanowires （NWs） has been a subject of intense research efforts due to gaining relevance in controlling functionality of nanoelectromechanical systems （NEMS）; meanwhile, one of the characteristics of the NEMS is the dependence of the functionality of the systems upon the applied electric field. The study of the electric effects on the Young＇s modulus of nanostructures is of certain usefulness in the design of NEMS and the precise measurement of mechanical properties of one-dimensional nanostructures. This paper reviews the origin of the size-dependence of the elastic property of NWs and the factors influencing the discrepancies and inconsistencies in the measured values of the Young＇s modulus for the NW, besides the surface effects, nonlinear effects, the electromechanical coupling effects as a possible effect responsible for the differences in quantitative and qualitative performance of the measured Young＇s modulus for the NWs versus the diameter are clarified.展开更多
BACKGROUND： The postoperative recovery of nerve function in patients with peripheral nerve injury is always an important problem to solve after treatment. The electric stimulation induced electromagnetic field can no...BACKGROUND： The postoperative recovery of nerve function in patients with peripheral nerve injury is always an important problem to solve after treatment. The electric stimulation induced electromagnetic field can nourish nerve, postpone muscular atrophy, and help the postoperative neuromuscular function. OBJECTIVE： To observe the effects of low-frequency pulse percutaneous electric stimulation on the functional recovery of postoperative patients with peripheral nerve injury, and quantitatively evaluate the results of electromyogram （EMG） examination before and after treatment. DESIGN ： A retrospective case analysis SETTING： The Sixth People＇s Hospital affiliated to Shanghai Jiaotong University PARTICIPANTS： Nineteen postoperative inpatients with peripheral nerve injury were selected from the De- partment of Orthopaedics, the Sixth People＇s Hospital affiliated to Shanghai Jiaotong University from June 2005 to January 2006, including 13 males and 6 females aged 24-62 years with an average of 36 years old. There were 3 cases of brachial plexus nerve injury, 3 of median nerve injury, 7 of radial nerve injury, 3 of ul- nar nerve injury and 3 of common peroneal nerve injury, and all the patients received probing nerve fiber restoration. Their main preoperative manifestations were dennervation, pain in limbs, motor and sensory disturbances. All the 19 patients were informed with the therapeutic program and items for evaluation. METHODS： ① Low-frequency pulse percutaneous electric stimulation apparatus： The patients were given electric stimulation with the TERESA cantata instrument （TERESA-0, Shanghai Teresa Health Technology, Co., Ltd.）. The patients were stimulated with symmetric square waves of 1-111 Hz, and the intensity was 1.2-5.0 mA, and it was gradually adjusted according to the recovered conditions of neural regeneration following the principle that the intensity was strong enough and the patients felt no obvious upset. They were treated for 4- 24 weeks, 10-30 minutes for each time, 1-3 times a day, and 6 weeks as a course. ② EMG examination was applied to evaluate the recoveries of recruitment, motor conduction velocity （MCV） and sensory conduction velocity （SCV） before and after treatment. The patients were examined with the EMG apparatus （DIS- A2000C, Danmark） before and after the treatment of percutaneous electric stimulation. ③Standards for evaluating the effects included cured （complete recovery of motor functions, muscle strength of grade 5, no abnormality in EMG examination）, obviously effective [general recovery of motor function, muscle strength of grade 4, no or a few denervation potentials, motor conduction velocity （MCV） and sensory conduction velocity （SCV）], improved （partial recovery of motor function, muscle strength of grade 3, denervation potentials and reinneration potentials, slowed MCV and SCV, invalid （no obvious changes of motor function）. MAIN OUTCOME MEASURES： ① Ameliorated degree of the nerve function of the postoperative patients with peripheral nerve injury treated with percutaneous electric stimulation; ② Changes of EMG examination before and after treatment. RESULTS： All the 19 postoperative patients with peripheral nerve injury were involved in the analysis of results. ① Comparison of nerve function before and after treatment in 19 patients with peripheral nerve injury of different sites： For the patients with radial nerve injury （n=7）, the nerve functions all completely recovered after 8-week treatment, and the cured and obvious rate was 100% （7/7）; For the patients with brachial plexus nerve injury （n=3）, 1 case had no obvious improvement, and the cured and obvious rate was 67% （2/3）; For the patients with common peroneal nerve injury （n=3）, the extension of foot dorsum generally recovered in 1 case of nerve contusion after 4-week treatment, and the cured and obvious rate was 67% （2/3）; For the patients with median nerve injury （n=3）, muscle strength was obviously recovered, and the cured and obvious rate was 100% （3/3）; For the patients with ulnar nerve injury （n=3）, 1 case only had recovery of partial senses, and the cured and obvious rate was 67% （2/3）. Totally 9 cases were cured, 7 were obviously effective, 1 was improved, and only 2 were invalid. After 4 courses, the cured rate of damaged nerve function after four courses was 47% （9/19）, and effective rate was 89% （17/19）.② Comparison of EMG examination before and after treatment： Before and after percutaneous electric stimulation, he effective rates of recruitment, MCV and SCV were 89% （17/19）, 58% （11/19）, 47% （9/19） respectively, and there were extremely obvious differences （P〈 0.01）. CONCLUSION： ①Low-frequency pulse percutaneous electric stimulation can improve the nerve function of postoperative patients with peripheral nerve injury of different sites, especially that the injuries of radial nerve and median nerve recover more obviously. ②Percutaneous electric stimulation can ameliorate the indexes of EMG examination, especially the recruitment, in postoperative patients with peripheral nerve injury.展开更多
The nonlinear thermo–magneto–mechanical magnetostrictive constitutive and the linear thermo–mechanical-electric piezoelectric constitutive are adopted in this paper. The bias magnetic field and ambient temperature ...The nonlinear thermo–magneto–mechanical magnetostrictive constitutive and the linear thermo–mechanical-electric piezoelectric constitutive are adopted in this paper. The bias magnetic field and ambient temperature are equivalent to a magnetic source and a thermo source, respectively. An equivalent circuit, which contains a magnetic source and a thermo source at the input, for the thermo–magneto–electric coupling effect in magnetoelectric（ME） laminates, is established. The theoretical models of the output voltage and static ME coefficient for ME laminates can be derived from this equivalent circuit model. The predicted static ME coefficient versus temperature curves are in excellent agreement with the experimental data available both qualitatively and quantitatively. It confirms the validity of the proposed model. Then the models are adopted to predict variations in the output voltages and ME coefficients in the laminates under different ambient temperatures, bias magnetic fields, and the volume ratios of magnetostrictive phases. This shows that the output voltage increases with both increasing temperature and increasing volume ratio of magnetostrictive phases; the ME coefficient decreases with increasing temperature; the ME coefficient shows an initial sharp increase and then decreases slowly with the increase in the bias magnetic field, and there is an optimum volume ratio of magnetostrictive phases that maximize the ME coefficient.This paper can not only provide a new idea for the study of the thermo–magneto–electric coupling characteristics of ME laminates, but also provide a theoretical basis for the design and application of ME laminates, operating under different sensors.展开更多
Electric double-layer field effect experiments were performed on ultrathin films of La0.325Pr0.3Ca0.375MnO3, which is noted for its micrometer-scale phase separation. A clear change of resistance up to 220% was observ...Electric double-layer field effect experiments were performed on ultrathin films of La0.325Pr0.3Ca0.375MnO3, which is noted for its micrometer-scale phase separation. A clear change of resistance up to 220% was observed and the characteristic metal-insulator transition temperature Tp was also shifted. The changes of both the resistance and Tp, suggest that the electric field induced not only tuning of the carrier density but also rebalancing of the phase separation states. The change of the charge-ordered insulating phase fraction was estimated to be temperature dependent, and a maximum of 16% was achieved in the phase separation regime. This tuning effect was partially irreversible, which might be due to an oxygen vacancy migration that is driven by the huge applied electric field.展开更多
The wedge-shaped and leaf-type silicon light-emitting devices(LED)are designed and fabricated with the Singapore Chartered Semi Inc.'s dual-gate standard 0.35μm CMOS process.The basic structure of the two devices...The wedge-shaped and leaf-type silicon light-emitting devices(LED)are designed and fabricated with the Singapore Chartered Semi Inc.'s dual-gate standard 0.35μm CMOS process.The basic structure of the two devices is N well-P+ junction.P+ area is the wedge-shaped structure,which is embedded in N well.The leaf-type silicon LED device is a combination of the three wedge-shaped LED devices.The main difference between the two devices is their different electrode distribution,which is mainly in order to analyze the application of electric field confinement(EFC).The devices' micrographs were measured with the Olympus IC test microscope.The forward and reverse bias electrical characteristics of the devices were tested.Light measurements of the devices show that the electrode layout is very important when the electric field confinement is applied.展开更多
The spark plasma sintering（SPS） method was used to study the mechanism of reaction interface between Zr and Ti3AlC2 with electric current going through it. It was found that electric current greatly reduced the bond...The spark plasma sintering（SPS） method was used to study the mechanism of reaction interface between Zr and Ti3AlC2 with electric current going through it. It was found that electric current greatly reduced the bonding temperature of Zr and Ti3AlC2. By the micro-structure analysis of the interface through SEM/EDS, it was found that Al atoms diffused from the Ti3AlC2 substrate into the Zr side and reacted with Zr to form the Zr-Al compounds at the interface, which is the strengthening mechanism of Ti3AlC2-Zr bonding. The thickness of reaction layers（Zr-Al alloy） was from 0.879 to 13.945 mm depending on different sintering condition. Current direction, heating rate, soaking time, pulse patterns all influenced the diffusion of Al atoms which affected the joining quality of Zr and Ti3AlC2.展开更多
The oil-pressboard insulation is a typical composite insulation system widely used in the design and manufactory of large power apparatus. The implement of oil-pressboard insulation may lead to surface electrification...The oil-pressboard insulation is a typical composite insulation system widely used in the design and manufactory of large power apparatus. The implement of oil-pressboard insulation may lead to surface electrification and discharge at the interface under certain condition. It is of significant importance to take an insight into the phenomenon occurring at the interface. Through experiment, the pressboard is found as a porous material. The interface changes abruptly from bulk pressboard to the bulk oil as a result of the porous structure. A new model is proposed which divides the interface into bulk oil region, transition region, and bulk pressboard region. The width of the transition region is decided according to the microtome figure. The effective permittivity of the transition region is calculated using a new model based on fractal theory. The model is validated and compared with previous calculation model. The effect of the existence of transition region on the electric field distribution is discussed.展开更多
The purpose of this paper is to show the influence of the edge-effect on the electric field distribution, and hence on the inner capacitance and outer capacitance of a cylindrical capacitor surrounded by an insulating...The purpose of this paper is to show the influence of the edge-effect on the electric field distribution, and hence on the inner capacitance and outer capacitance of a cylindrical capacitor surrounded by an insulating medium. To generalize the results, a two-dimensional axisymmetric finite element model of a cylindrical capacitor has been generated and the problem has been resolved taking into account the distance between the conductors for a complete set of dimensions. The available obtained results have been compared with previous published works. Finally, using statistical tools, the mathematical expression for computing the relationship between capacitance and insulation gap and cylindrical plates dimensions has been obtained.展开更多
Objective The purpose of the study was to investigate the effective parameters of electric cortex stimulation (ECS) for functional brain mapping. Methods We collected 21 subjects who underwent epilepsy surgeries conse...Objective The purpose of the study was to investigate the effective parameters of electric cortex stimulation (ECS) for functional brain mapping. Methods We collected 21 subjects who underwent epilepsy surgeries consecutively in Beijing Institute of Functional Neurosurgery with the epileptogenic zone located in perirolandic areas from展开更多
Electromagnetic wave-absorbing(EMA)materials at high temperatures are limited by poor conduction loss(L_(c)).However,adding conductors simultaneously increases the conduction loss and interfacial polarization loss,lea...Electromagnetic wave-absorbing(EMA)materials at high temperatures are limited by poor conduction loss(L_(c)).However,adding conductors simultaneously increases the conduction loss and interfacial polarization loss,leading to a conflict between impedance matching(Z_(in)/Z_(0))and electromagnetic wave loss.This will prevent electromagnetic waves from entering the EMA materials,finally reducing overall absorbing performance.Here,the effective electrical conductivity(σ)is enhanced by synchronizing particle size and grain number of Ti_(3)AlC_(2) to increase the conduction loss and avoid the conflict between the impedance matching and the electromagnetic wave loss.As a result,the best-absorbing performance with an effective absorption bandwidth(EAB)of 4.8 GHz(10.6–15.4 GHz)at a thickness of only 1.5 mm is realized,which is the best combination of wide absorption bandwidth and small thickness,and the minimum reflection loss(RL_(min))reaches−45.6 dB at 4.1 GHz.In short,this work explores the regulating mechanism of the EMA materials of effective electrical conductivity by simulated calculations using the Vienna ab-initio Simulation Package(VASP)and COMSOL as well as a series of experiments,which provide new insight into a rational design of materials with anisotropic electrical conductivity.展开更多
We report on current-induced thermal power investigation of graphene nanostructure for potential local-heating ap-plications.It is found that the efficiency of heating can be greatly improved if graphene is patterned ...We report on current-induced thermal power investigation of graphene nanostructure for potential local-heating ap-plications.It is found that the efficiency of heating can be greatly improved if graphene is patterned into structures with narrow width and long channel.In a narrow graphene-ribbon,the Joule heating power exhibits an obvious dependence on the back-gate voltage.By monitoring Raman spectra,the temperature of graphene-ribbon can be determined.The temperature of graphene-ribbon is modulated by the electric field effect when the sample is sourced with a relatively high current.展开更多
文摘Dear editor, We read with pleasure the well-designed study by Butler et al of electrical cardioversion of emergency department patients with atrial fibrillation. We appreciate their analysis of the distinctives of procedural sedation when employed for this indication. Understanding the dosing adjustments to propofol undertaken by their sedationists will help us more carefully evaluate our own approach to sedating patients undergoing electrical cardioversion of atrial fibrillation.
基金Supported by the National Basic Research Program of China under Grant Nos 2013CB921900 and 2014CB920900the National Natural Science Foundation of China under Grant No 11374021)(S.Yan,Z.Xie,J.-H,Chen)+1 种基金support from the Elemental Strategy Initiative conducted by the MEXT,Japana Grant-in-Aid for Scientific Research on Innovative Areas"Science of Atomic Layers"from JSPS
文摘The energy bandgap is an intrinsic character of semiconductors, which largely determines their properties. The ability to continuously and reversibly tune the bandgap of a single device during real time operation is of great importance not only to device physics but also to technological applications. Here we demonstrate a widely tunable bandgap of few-layer black phosphorus （BP） by the application of vertical electric field in dual-gated BP field-effect transistors. A total bandgap reduction of 124 meV is observed when the electrical displacement field is increased from 0.10 V/nm to 0.83 V/nm. Our results suggest appealing potential for few-layer BP as a tunable bandgap material in infrared optoelectronies, thermoelectric power generation and thermal imaging.
文摘Fast ionic conductors are one kind of solid state material with ionic conductivity as high as that of melten salts or liquid electrolytes.Ionic conductivity is one of the important parameters for characterizing a fast ionic conductor.For a long time materialists and chemists have made great efforts in search of new fast ionic conductors with high ionic conductivity.In view of structure,they have synthesised silver and copper fast ionic conductors with so called open structures.But it is not so successful for searching more applicable alkaline fast ionic conductors.Since polymer has flexibility for making thin film,it concentrates attention on the polymer-alkaline salt complex.Fenton et al.have first reported poly(ethylene oxide) (PEO)-alkaline salt complex.Later on Armard et al.have investigated the electrical property of PEO-NaSCN.
文摘Development of graphene field effect transistors （GFETs） faces a serious challenge of graphene interface to the dielectric material. A single layer of intrinsic graphene has an average sheet resistance of the order of 1-5 kΩ/□. The intrinsic nature of graphene leads to higher contact resistance yielding into the outstanding properties of the material. We design a graphene matrix with minimized sheet resistance of 0.185 kΩ/□ with Ag contacts. The developed matrices on silicon substrates provide a variety of transistor design options for subsequent fabrication. The graphene layer is developed over 400 nm nickel in such a way as to analyze hypersensitive electrical properties of the interface for exfoliation. This work identifies potential of the design in the applicability of few-layer GFETs with less process steps with the help of analyzing the effect of metal contact and post-process anneMing on its electrical fabrication.
基金Project supported by the Soft-Path Science and Engineering Research Center (SPERC),Iwate Universitythe JSPS KAKENHI (Grant Nos. JP18K03530,JP21K04622, and JP21K13869)。
文摘We performed ultrasonic measurements on a quaternary cubic compound PrRu_(2)In_(2)Zn_(18) to explore the ground state properties derived from non-Kramers Γ_(3) doublet of Pr^(3+).PrRu_(2)In_(2)Zn_(18) is a quaternary derivative of the ternary compound PrRu_(2)Zn_(20) that exhibits a structural phase transition at T_S=138 K.In PrRu_(2)In_(2)Zn_(18),the Zn atoms at the 16c site in PrRu_(2)Zn_(20) are selectively replaced by In atoms.A monotonic increase was observed in the temperature dependence of elastic constants C_L=(C_(11)+2C_(12)+4C_(44))/3 and C_(T)=(C_(11)-C_(12)+C_(44))/3 in the temperature range around T_(S) to which an elastic softening was observed in(C_(11)-C_(12))/2 for PrRu_(2)Zn_(20).The disappearance of the softening indicates that the structural transition in PrRu_(2)Zn_(20) is suppressed by the substitution of Zn ions by In ones with a larger ionic radius.Alternatively,the C_(T) of PrRu_(2)In_(2)Zn_(18) exhibits a precursor Curie-type elastic softening toward low temperatures being responsible for the non-Kramers Γ_(3) ground state.We discuss the ground state and the evolution of the elastic properties of the different single-crystal samples of PrRu_(2)In_(2)Zn_(18) grown under different conditions.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61627813,62204018,and 61571023)the Beijing Municipal Science and Technology Project(Grant No.Z201100004220002)+2 种基金the National Key Technology Program of China(Grant No.2017ZX01032101)the Program of Introducing Talents of Discipline to Universities in China(Grant No.B16001)the VR Innovation Platform from Qingdao Science and Technology Commission.
文摘Dzyaloshinskii–Moriya interaction(DMI) is under extensive investigation considering its crucial status in chiral magnetic orders, such as Néel-type domain wall(DW) and skyrmions. It has been reported that the interfacial DMI originating from Rashba spin–orbit coupling(SOC) can be linearly tuned with strong external electric fields. In this work, we experimentally demonstrate that the strength of DMI exhibits rapid fluctuations, ranging from 10% to 30% of its original value, as a function of applied electric fields in Pt/Co/MgO heterostructures within the small field regime(< 10-2V/nm). Brillouin light scattering(BLS) experiments have been performed to measure DMI, and first-principles calculations show agreement with this observation, which can be explained by the variation in orbital hybridization at the Co/MgO interface in response to the weak electric fields. Our results on voltage control of DMI(VCDMI) suggest that research related to the voltage control of magnetic anisotropy for spin–orbit torque or the motion control of skyrmions might also have to consider the role of the external electric field on DMI as small voltages are generally used for the magnetoresistance detection.
基金Project supported by the National Natural Science Foundation of China （Grant No 10574098）, the Natural Science Foundation , （Grant No 05YFJMJC05200） of Tianjin, and the Scientific Research Fund of Zhejlang Provincial Education Department.
文摘Using a three-step laser saturation excitation technique, the saturation effects on the Ba 6pns （J = 1） and 6pad （J = 1, 3） autoionization spectra are observed systemically in zero field. These saturation spectra are introduced to determine the high n members of 6pnl （l = 0, 2） autoionizing series and are used to analyse the channel interactions among the autoionizing series in zero field. Furthermore, the saturation excitation technique is applied to the electric field case, in which the saturation spectra of Ba 6pnk （｜M｜= 0, 1） autoionizing Stark states are measured. Most of these saturation spectra are observed for the first time so far as we know, which indicate the mixing of the autoionizing states in the electric fields.
基金Project supported by the National Natural Science Foundation of China （Grant No 10574163）, the Center of Theoretical Nuclear Physics, National Laboratory of Heavy Ion Collisions, Lanzhou, China.
文摘The effect of an electric field E on a narrow quantum ring that contains two electrons and is threaded by a magnetic flux B has been investigated. Localization of the electronic distribution and suppression of the AharonovBohm oscillation （ABO） are found in the two-electron ring, which are similar to those found in a one-electron ring. However, the period of ABO in a two-electron ring is reduced by half compared with that in a one-electron ring. Furthermore, during the variation of B, the persistent current of the ground state may undergo a sudden change in sign. This change is associated with a singlet-triplet transition and has no counterpart in one-electron rings. For a given E, there exists a threshold of energy. When the energy of the excited state exceeds the threshold, the localization would disappear and the ABO would recover. The value of the threshold is proportional to the magnitude of E. Once the threshold is exceeded, the persistent current is much stronger than the current of the ground state at E=0.
基金supported by the National Basic Research Program of China (No2007CB607506)the NSFC's program(No90405005)+1 种基金the PhD Fund (No20050730016)the Fund of the State Key Laboratory of Advanced Technology for Materials Synthesis and Processing(Wuhan University of Technology)(NoWUT2005Z04)
文摘As an important component of nanodevices and nanomachine constructions, the mechanical performance of nanowires （NWs） has been a subject of intense research efforts due to gaining relevance in controlling functionality of nanoelectromechanical systems （NEMS）; meanwhile, one of the characteristics of the NEMS is the dependence of the functionality of the systems upon the applied electric field. The study of the electric effects on the Young＇s modulus of nanostructures is of certain usefulness in the design of NEMS and the precise measurement of mechanical properties of one-dimensional nanostructures. This paper reviews the origin of the size-dependence of the elastic property of NWs and the factors influencing the discrepancies and inconsistencies in the measured values of the Young＇s modulus for the NW, besides the surface effects, nonlinear effects, the electromechanical coupling effects as a possible effect responsible for the differences in quantitative and qualitative performance of the measured Young＇s modulus for the NWs versus the diameter are clarified.
基金grants from Sci-entific Research Fund of theMinistry of Health, No.20040801 Shanghai Ris-ing-Star Program of Technologi-cal Committee, No.05QMX1438
文摘BACKGROUND： The postoperative recovery of nerve function in patients with peripheral nerve injury is always an important problem to solve after treatment. The electric stimulation induced electromagnetic field can nourish nerve, postpone muscular atrophy, and help the postoperative neuromuscular function. OBJECTIVE： To observe the effects of low-frequency pulse percutaneous electric stimulation on the functional recovery of postoperative patients with peripheral nerve injury, and quantitatively evaluate the results of electromyogram （EMG） examination before and after treatment. DESIGN ： A retrospective case analysis SETTING： The Sixth People＇s Hospital affiliated to Shanghai Jiaotong University PARTICIPANTS： Nineteen postoperative inpatients with peripheral nerve injury were selected from the De- partment of Orthopaedics, the Sixth People＇s Hospital affiliated to Shanghai Jiaotong University from June 2005 to January 2006, including 13 males and 6 females aged 24-62 years with an average of 36 years old. There were 3 cases of brachial plexus nerve injury, 3 of median nerve injury, 7 of radial nerve injury, 3 of ul- nar nerve injury and 3 of common peroneal nerve injury, and all the patients received probing nerve fiber restoration. Their main preoperative manifestations were dennervation, pain in limbs, motor and sensory disturbances. All the 19 patients were informed with the therapeutic program and items for evaluation. METHODS： ① Low-frequency pulse percutaneous electric stimulation apparatus： The patients were given electric stimulation with the TERESA cantata instrument （TERESA-0, Shanghai Teresa Health Technology, Co., Ltd.）. The patients were stimulated with symmetric square waves of 1-111 Hz, and the intensity was 1.2-5.0 mA, and it was gradually adjusted according to the recovered conditions of neural regeneration following the principle that the intensity was strong enough and the patients felt no obvious upset. They were treated for 4- 24 weeks, 10-30 minutes for each time, 1-3 times a day, and 6 weeks as a course. ② EMG examination was applied to evaluate the recoveries of recruitment, motor conduction velocity （MCV） and sensory conduction velocity （SCV） before and after treatment. The patients were examined with the EMG apparatus （DIS- A2000C, Danmark） before and after the treatment of percutaneous electric stimulation. ③Standards for evaluating the effects included cured （complete recovery of motor functions, muscle strength of grade 5, no abnormality in EMG examination）, obviously effective [general recovery of motor function, muscle strength of grade 4, no or a few denervation potentials, motor conduction velocity （MCV） and sensory conduction velocity （SCV）], improved （partial recovery of motor function, muscle strength of grade 3, denervation potentials and reinneration potentials, slowed MCV and SCV, invalid （no obvious changes of motor function）. MAIN OUTCOME MEASURES： ① Ameliorated degree of the nerve function of the postoperative patients with peripheral nerve injury treated with percutaneous electric stimulation; ② Changes of EMG examination before and after treatment. RESULTS： All the 19 postoperative patients with peripheral nerve injury were involved in the analysis of results. ① Comparison of nerve function before and after treatment in 19 patients with peripheral nerve injury of different sites： For the patients with radial nerve injury （n=7）, the nerve functions all completely recovered after 8-week treatment, and the cured and obvious rate was 100% （7/7）; For the patients with brachial plexus nerve injury （n=3）, 1 case had no obvious improvement, and the cured and obvious rate was 67% （2/3）; For the patients with common peroneal nerve injury （n=3）, the extension of foot dorsum generally recovered in 1 case of nerve contusion after 4-week treatment, and the cured and obvious rate was 67% （2/3）; For the patients with median nerve injury （n=3）, muscle strength was obviously recovered, and the cured and obvious rate was 100% （3/3）; For the patients with ulnar nerve injury （n=3）, 1 case only had recovery of partial senses, and the cured and obvious rate was 67% （2/3）. Totally 9 cases were cured, 7 were obviously effective, 1 was improved, and only 2 were invalid. After 4 courses, the cured rate of damaged nerve function after four courses was 47% （9/19）, and effective rate was 89% （17/19）.② Comparison of EMG examination before and after treatment： Before and after percutaneous electric stimulation, he effective rates of recruitment, MCV and SCV were 89% （17/19）, 58% （11/19）, 47% （9/19） respectively, and there were extremely obvious differences （P〈 0.01）. CONCLUSION： ①Low-frequency pulse percutaneous electric stimulation can improve the nerve function of postoperative patients with peripheral nerve injury of different sites, especially that the injuries of radial nerve and median nerve recover more obviously. ②Percutaneous electric stimulation can ameliorate the indexes of EMG examination, especially the recruitment, in postoperative patients with peripheral nerve injury.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11172285 and 11472259)the Natural Science Foundation of Zhejiang Province,China(Grant No.LR13A020002)
文摘The nonlinear thermo–magneto–mechanical magnetostrictive constitutive and the linear thermo–mechanical-electric piezoelectric constitutive are adopted in this paper. The bias magnetic field and ambient temperature are equivalent to a magnetic source and a thermo source, respectively. An equivalent circuit, which contains a magnetic source and a thermo source at the input, for the thermo–magneto–electric coupling effect in magnetoelectric（ME） laminates, is established. The theoretical models of the output voltage and static ME coefficient for ME laminates can be derived from this equivalent circuit model. The predicted static ME coefficient versus temperature curves are in excellent agreement with the experimental data available both qualitatively and quantitatively. It confirms the validity of the proposed model. Then the models are adopted to predict variations in the output voltages and ME coefficients in the laminates under different ambient temperatures, bias magnetic fields, and the volume ratios of magnetostrictive phases. This shows that the output voltage increases with both increasing temperature and increasing volume ratio of magnetostrictive phases; the ME coefficient decreases with increasing temperature; the ME coefficient shows an initial sharp increase and then decreases slowly with the increase in the bias magnetic field, and there is an optimum volume ratio of magnetostrictive phases that maximize the ME coefficient.This paper can not only provide a new idea for the study of the thermo–magneto–electric coupling characteristics of ME laminates, but also provide a theoretical basis for the design and application of ME laminates, operating under different sensors.
基金supported by the National Basic Research Program of China(Grant Nos.2011CBA00106 and 2014CB921401)the National Natural Science Foundation of China(Grant Nos.11174342,9131208,and 11374344)
文摘Electric double-layer field effect experiments were performed on ultrathin films of La0.325Pr0.3Ca0.375MnO3, which is noted for its micrometer-scale phase separation. A clear change of resistance up to 220% was observed and the characteristic metal-insulator transition temperature Tp was also shifted. The changes of both the resistance and Tp, suggest that the electric field induced not only tuning of the carrier density but also rebalancing of the phase separation states. The change of the charge-ordered insulating phase fraction was estimated to be temperature dependent, and a maximum of 16% was achieved in the phase separation regime. This tuning effect was partially irreversible, which might be due to an oxygen vacancy migration that is driven by the huge applied electric field.
基金National Natural Science Foundation Subject(60536030,60676038)Tianjin Key Basic Research Project(06YFJZJC00200)
文摘The wedge-shaped and leaf-type silicon light-emitting devices(LED)are designed and fabricated with the Singapore Chartered Semi Inc.'s dual-gate standard 0.35μm CMOS process.The basic structure of the two devices is N well-P+ junction.P+ area is the wedge-shaped structure,which is embedded in N well.The leaf-type silicon LED device is a combination of the three wedge-shaped LED devices.The main difference between the two devices is their different electrode distribution,which is mainly in order to analyze the application of electric field confinement(EFC).The devices' micrographs were measured with the Olympus IC test microscope.The forward and reverse bias electrical characteristics of the devices were tested.Light measurements of the devices show that the electrode layout is very important when the electric field confinement is applied.
基金Supported by National Natural Science Foundation of China(Nos.91226202,91426304)CAS Interdisciplinary Innovation Team Project
文摘The spark plasma sintering（SPS） method was used to study the mechanism of reaction interface between Zr and Ti3AlC2 with electric current going through it. It was found that electric current greatly reduced the bonding temperature of Zr and Ti3AlC2. By the micro-structure analysis of the interface through SEM/EDS, it was found that Al atoms diffused from the Ti3AlC2 substrate into the Zr side and reacted with Zr to form the Zr-Al compounds at the interface, which is the strengthening mechanism of Ti3AlC2-Zr bonding. The thickness of reaction layers（Zr-Al alloy） was from 0.879 to 13.945 mm depending on different sintering condition. Current direction, heating rate, soaking time, pulse patterns all influenced the diffusion of Al atoms which affected the joining quality of Zr and Ti3AlC2.
基金Project(2009CB724504)supported by the National Basic Research Program of China
文摘The oil-pressboard insulation is a typical composite insulation system widely used in the design and manufactory of large power apparatus. The implement of oil-pressboard insulation may lead to surface electrification and discharge at the interface under certain condition. It is of significant importance to take an insight into the phenomenon occurring at the interface. Through experiment, the pressboard is found as a porous material. The interface changes abruptly from bulk pressboard to the bulk oil as a result of the porous structure. A new model is proposed which divides the interface into bulk oil region, transition region, and bulk pressboard region. The width of the transition region is decided according to the microtome figure. The effective permittivity of the transition region is calculated using a new model based on fractal theory. The model is validated and compared with previous calculation model. The effect of the existence of transition region on the electric field distribution is discussed.
文摘The purpose of this paper is to show the influence of the edge-effect on the electric field distribution, and hence on the inner capacitance and outer capacitance of a cylindrical capacitor surrounded by an insulating medium. To generalize the results, a two-dimensional axisymmetric finite element model of a cylindrical capacitor has been generated and the problem has been resolved taking into account the distance between the conductors for a complete set of dimensions. The available obtained results have been compared with previous published works. Finally, using statistical tools, the mathematical expression for computing the relationship between capacitance and insulation gap and cylindrical plates dimensions has been obtained.
文摘Objective The purpose of the study was to investigate the effective parameters of electric cortex stimulation (ECS) for functional brain mapping. Methods We collected 21 subjects who underwent epilepsy surgeries consecutively in Beijing Institute of Functional Neurosurgery with the epileptogenic zone located in perirolandic areas from
文摘Electromagnetic wave-absorbing(EMA)materials at high temperatures are limited by poor conduction loss(L_(c)).However,adding conductors simultaneously increases the conduction loss and interfacial polarization loss,leading to a conflict between impedance matching(Z_(in)/Z_(0))and electromagnetic wave loss.This will prevent electromagnetic waves from entering the EMA materials,finally reducing overall absorbing performance.Here,the effective electrical conductivity(σ)is enhanced by synchronizing particle size and grain number of Ti_(3)AlC_(2) to increase the conduction loss and avoid the conflict between the impedance matching and the electromagnetic wave loss.As a result,the best-absorbing performance with an effective absorption bandwidth(EAB)of 4.8 GHz(10.6–15.4 GHz)at a thickness of only 1.5 mm is realized,which is the best combination of wide absorption bandwidth and small thickness,and the minimum reflection loss(RL_(min))reaches−45.6 dB at 4.1 GHz.In short,this work explores the regulating mechanism of the EMA materials of effective electrical conductivity by simulated calculations using the Vienna ab-initio Simulation Package(VASP)and COMSOL as well as a series of experiments,which provide new insight into a rational design of materials with anisotropic electrical conductivity.
基金Project supported by the National Key R&D Program of China(Grant No.2017YFF0206106)the Chinese Academy of Sciences(Grant No.XDB04040300)+1 种基金the National Natural Science Foundation of China(Grant No.51772317)the Science and Technology Commission of Shanghai Municipality,China(Grant No.16ZR1442700)
文摘We report on current-induced thermal power investigation of graphene nanostructure for potential local-heating ap-plications.It is found that the efficiency of heating can be greatly improved if graphene is patterned into structures with narrow width and long channel.In a narrow graphene-ribbon,the Joule heating power exhibits an obvious dependence on the back-gate voltage.By monitoring Raman spectra,the temperature of graphene-ribbon can be determined.The temperature of graphene-ribbon is modulated by the electric field effect when the sample is sourced with a relatively high current.
