The objective of reliability-based design optimization(RBDO)is to minimize the optimization objective while satisfying the corresponding reliability requirements.However,the nested loop characteristic reduces the effi...The objective of reliability-based design optimization(RBDO)is to minimize the optimization objective while satisfying the corresponding reliability requirements.However,the nested loop characteristic reduces the efficiency of RBDO algorithm,which hinders their application to high-dimensional engineering problems.To address these issues,this paper proposes an efficient decoupled RBDO method combining high dimensional model representation(HDMR)and the weight-point estimation method(WPEM).First,we decouple the RBDO model using HDMR and WPEM.Second,Lagrange interpolation is used to approximate a univariate function.Finally,based on the results of the first two steps,the original nested loop reliability optimization model is completely transformed into a deterministic design optimization model that can be solved by a series of mature constrained optimization methods without any additional calculations.Two numerical examples of a planar 10-bar structure and an aviation hydraulic piping system with 28 design variables are analyzed to illustrate the performance and practicability of the proposed method.展开更多
In a crowd density estimation dataset,the annotation of crowd locations is an extremely laborious task,and they are not taken into the evaluation metrics.In this paper,we aim to reduce the annotation cost of crowd dat...In a crowd density estimation dataset,the annotation of crowd locations is an extremely laborious task,and they are not taken into the evaluation metrics.In this paper,we aim to reduce the annotation cost of crowd datasets,and propose a crowd density estimation method based on weakly-supervised learning,in the absence of crowd position supervision information,which directly reduces the number of crowds by using the number of pedestrians in the image as the supervised information.For this purpose,we design a new training method,which exploits the correlation between global and local image features by incremental learning to train the network.Specifically,we design a parent-child network(PC-Net)focusing on the global and local image respectively,and propose a linear feature calibration structure to train the PC-Net simultaneously,and the child network learns feature transfer factors and feature bias weights,and uses the transfer factors and bias weights to linearly feature calibrate the features extracted from the Parent network,to improve the convergence of the network by using local features hidden in the crowd images.In addition,we use the pyramid vision transformer as the backbone of the PC-Net to extract crowd features at different levels,and design a global-local feature loss function(L2).We combine it with a crowd counting loss(LC)to enhance the sensitivity of the network to crowd features during the training process,which effectively improves the accuracy of crowd density estimation.The experimental results show that the PC-Net significantly reduces the gap between fullysupervised and weakly-supervised crowd density estimation,and outperforms the comparison methods on five datasets of Shanghai Tech Part A,ShanghaiTech Part B,UCF_CC_50,UCF_QNRF and JHU-CROWD++.展开更多
A gas puff imaging(GPI)diagnostic has been developed and operated on EAST since 2012,and the time-delay estimation(TDE)method is used to derive the propagation velocity of fluctuations from the two-dimensional GPI dat...A gas puff imaging(GPI)diagnostic has been developed and operated on EAST since 2012,and the time-delay estimation(TDE)method is used to derive the propagation velocity of fluctuations from the two-dimensional GPI data.However,with the TDE method it is difficult to analyze the data with fast transient events,such as edge-localized mode(ELM).Consequently,a method called the spatial displacement estimation(SDE)algorithm is developed to estimate the turbulence velocity with high temporal resolution.Based on the SDE algorithm,we make some improvements,including an adaptive median filter and super-resolution technology.After the development of the algorithm,a straight-line movement and a curved-line movement are used to test the accuracy of the algorithm,and the calculated speed agrees well with preset speed.This SDE algorithm is applied to the EAST GPI data analysis,and the derived propagation velocity of turbulence is consistent with that from the TDE method,but with much higher temporal resolution.展开更多
The existing direction-of-arrival(DOA)estimation methods only utilize the current received signals,which are susceptible to noise.In this paper,a method for DOA estimation based on a motion platform is proposed to ach...The existing direction-of-arrival(DOA)estimation methods only utilize the current received signals,which are susceptible to noise.In this paper,a method for DOA estimation based on a motion platform is proposed to achieve high-precision DOA estimation by utilizing past and present signals.The concept of synthetic aperture is introduced to construct a linear DOA estima-tion model.A DOA fine-tuning method based on the linear model is proposed to eliminate the lin-ear DOA variation,achieving a non-coherent accumulation of DOA estimations.Moreover,the baseband modulation and the phase modulation caused by the range history are compensated to achieve the coherent accumulation of all the DOA estimations.Simulation results show that the proposed method can significantly improve the DOA estimated accuracy at low signal-to-noise ratios(SNR).展开更多
The application of traditional synchronous measurement methods is limited by frequent fluctuations of electrical signals and complex frequency components in distribution networks.Therefore,it is critical to find solut...The application of traditional synchronous measurement methods is limited by frequent fluctuations of electrical signals and complex frequency components in distribution networks.Therefore,it is critical to find solutions to the issues of multifrequency parameter estimation and synchronous measurement estimation accuracy in the complex environment of distribution networks.By utilizing the multifrequency sensing capabilities of discrete Fourier transform signals and Taylor series for dynamic signal processing,a multifrequency signal estimation approach based on HT-IpDFT-STWLS(HIpST)for distribution networks is provided.First,by introducing the Hilbert transform(HT),the influence of noise on the estimation algorithm is reduced.Second,signal frequency components are obtained on the basis of the calculated signal envelope spectrum,and the interpolated discrete Fourier transform(IpDFT)frequency coarse estimation results are used as the initial values of symmetric Taylor weighted least squares(STWLS)to achieve high-precision parameter estimation under the dynamic changes of the signal,and the method increases the number of discrete Fourier.Third,the accuracy of this proposed method is verified by simulation analysis.Data show that this proposed method can accurately achieve the parameter estimation of multifrequency signals in distribution networks.This approach provides a solution for the application of phasor measurement units in distribution networks.展开更多
In this paper,we study the accuracy of delay-Doppler parameter estimation of targets in a passive radar using orthogonal frequency division multiplexing(OFDM)signal.A coarse-fine joint estimation method is proposed to...In this paper,we study the accuracy of delay-Doppler parameter estimation of targets in a passive radar using orthogonal frequency division multiplexing(OFDM)signal.A coarse-fine joint estimation method is proposed to achieve better estimation accuracy of target parameters without excessive computational burden.Firstly,the modulation symbol domain(MSD)method is used to roughly estimate the delay and Doppler of targets.Then,to obtain high-precision Doppler estimation,the atomic norm(AN)based on the multiple measurement vectors(MMV)model(MMV-AN)is used to manifest the signal sparsity in the continuous Doppler domain.At the same time,a reference signal compensation(RSC)method is presented to obtain highprecision delay estimation.Simulation results based on the OFDM signal show that the coarse-fine joint estimation method based on AN-RSC can obtain a more accurate estimation of target parameters compared with other algorithms.In addition,the proposed method also possesses computational advantages compared with the joint parameter estimation.展开更多
Dispersion and attenuation analysis can be used to determine formation anisotropy induced by fractures,or stresses.In this paper,we propose a nonparametric spectrum estimation method to get phase dispersion characteri...Dispersion and attenuation analysis can be used to determine formation anisotropy induced by fractures,or stresses.In this paper,we propose a nonparametric spectrum estimation method to get phase dispersion characteristics and attenuation coefficient.By designing an appropriate vector filter,phase velocity,attenuation coefficient and amplitude can be inverted from the waveform recorded by the receiver array.Performance analysis of this algorithm is compared with Extended Prony Method(EPM)and Forward and Backward Matrix Pencil(FBMP)method.Based on the analysis results,the proposed method is capable of achieving high resolution and precision as the parametric spectrum estimation methods.At the meantime,it also keeps high stability as the other nonparametric spectrum estimation methods.At last,applications to synthetic waveforms modeled using finite difference method and real data show its efficiency.The real data processing results show that the P-wave attenuation log is more sensitive to oil formation compared to S-wave;and the S-wave attenuation log is more sensitive to shale formation compared to P-wave.展开更多
In view of the complexity of existing linear frequency modulation(LFM)signal parameter estimation methods and the poor antinoise performance and estimation accuracy under a low signal-to-noise ratio(SNR),a parameter e...In view of the complexity of existing linear frequency modulation(LFM)signal parameter estimation methods and the poor antinoise performance and estimation accuracy under a low signal-to-noise ratio(SNR),a parameter estimation method for LFM signals with a Duffing oscillator based on frequency periodicity is proposed in this paper.This method utilizes the characteristic that the output signal of the Duffing oscillator excited by the LFM signal changes periodically with frequency,and the modulation period of the LFM signal is estimated by autocorrelation processing of the output signal of the Duffing oscillator.On this basis,the corresponding relationship between the reference frequency of the frequencyaligned Duffing oscillator and the frequency range of the LFM signal is analyzed by the periodic power spectrum method,and the frequency information of the LFM signal is determined.Simulation results show that this method can achieve high-accuracy parameter estimation for LFM signals at an SNR of-25 dB.展开更多
Purpose–The study aims to provide a basis for the effective use of safety-related information data and a quantitative assessment way for the occurrence probability of the safety risk such as the fatigue fracture of t...Purpose–The study aims to provide a basis for the effective use of safety-related information data and a quantitative assessment way for the occurrence probability of the safety risk such as the fatigue fracture of the key components.Design/methodology/approach–The fatigue crack growth rate is of dispersion,which is often used to accurately describe with probability density.In view of the external dispersion caused by the load,a simple and applicable probability expression of fatigue crack growth rate is adopted based on the fatigue growth theory.Considering the isolation among the pairs of crack length a and crack formation time t(a∼t data)obtained from same kind of structural parts,a statistical analysis approach of t distribution is proposed,which divides the crack length in several segments.Furthermore,according to the compatibility criterion of crack growth,that is,there is statistical development correspondence among a∼t data,the probability model of crack growth rate is established.Findings–The results show that the crack growth rate in the stable growth stage can be approximately expressed by the crack growth control curve da/dt=5 Q•a,and the probability density of the crack growth parameter Q represents the external dispersion;t follows two-parameter Weibull distribution in certain a values.Originality/value–The probability density f(Q)can be estimated by using the probability model of crack growth rate,and a calculation example shows that the estimation method is effective and practical.展开更多
Contrary to the other multi-carrier modulation systems, the coherent optical orthogonal frequency division multiplexing communication system with an offset quadrature amplitude modulation (CO-OFDM-OQAM) possesses inhe...Contrary to the other multi-carrier modulation systems, the coherent optical orthogonal frequency division multiplexing communication system with an offset quadrature amplitude modulation (CO-OFDM-OQAM) possesses inherent imaginary interference (IMI). This has an important impact on the channel estimation process. Currently, a variety of frequency-domain channel estimation methods have been proposed. However, there are various problems that still exist. For instance, in order to reduce the influence of IMI, it is necessary to insert more guard intervals between the training sequence and the payload, leading to the occupation of excessive spectrum resources. In order to address this problem, this work designs a high spectral efficient frequency-domain channel estimation method for the polarization-division-multiplexing CO-OFDM-OQAM systems. First, the working principle of the proposed method is described in detail. Then, its spectral efficiency, power peak-to-average ratio, and channel estimation performance are studied based on simulations. The simulation results show that the proposed method improves the spectral efficiency without worsening the power peak-to-average ratio. The channel estimation capability of this method is verified in three scenarios of long-distance transmissions, including back-to-back, 100 km, and 200 km transmissions. .展开更多
Based on the main research results of estimation methods of surface solar radiation at home and abroad in recent decades, three commonly used estimation models of surface solar radiation have been introduced, and thei...Based on the main research results of estimation methods of surface solar radiation at home and abroad in recent decades, three commonly used estimation models of surface solar radiation have been introduced, and their principles, advantages and disadvantages have been analyzed to provide scientific references for further study of surface solar radiation in future.展开更多
According,to the principle, "The failure data is the basis of software reliability analysis", we built a software reliability expert system (SRES) by adopting the artificial intelligence technology. By reaso...According,to the principle, "The failure data is the basis of software reliability analysis", we built a software reliability expert system (SRES) by adopting the artificial intelligence technology. By reasoning out the conclusion from the fitting results of failure data of a software project, the SRES can recommend users "the most suitable model" as a software reliability measurement model. We believe that the SRES can overcome the inconsistency in applications of software reliability models well. We report investigation results of singularity and parameter estimation methods of experimental models in SRES.展开更多
Previous works mainly focused on estimating direct relationship strength in social networks. If two users are not directly connected in a social network, there is no direct relationship. In order to estimate the relat...Previous works mainly focused on estimating direct relationship strength in social networks. If two users are not directly connected in a social network, there is no direct relationship. In order to estimate the relationship strength between two indirectly connected users as well as directly connected users, this paper proposes an estimation method for relationship strength in weighted social network graphs, which is based on the trust propagation strategy and the estimation of direct relationship strength. Our method considers the length of a relationship path, the number of relationship paths and the edge weights (direct relationship strength) along with a relationship path to estimate the strength of indirect relationship. Then it synthesizes the direct and indirect relationship strength to represent the strength of relationship between two users in social net- works. Thus our method can fully estimate the relationship strength between any two users in a social network no matter whether they are directly connected or not.展开更多
Accurate cost estimation at the early stage of a construction project is key factor in a project’s success. But it is difficult to quickly and accurately estimate construction costs at the planning stage, when drawin...Accurate cost estimation at the early stage of a construction project is key factor in a project’s success. But it is difficult to quickly and accurately estimate construction costs at the planning stage, when drawings, documentation and the like are still incomplete. As such, various techniques have been applied to accurately estimate construction costs at an early stage, when project information is limited. While the various techniques have their pros and cons, there has been little effort made to determine the best technique in terms of cost estimating performance. The objective of this research is to compare the accuracy of three estimating techniques (regression analysis (RA), neural network (NN), and support vector machine techniques (SVM)) by performing estimations of construction costs. By comparing the accuracy of these techniques using historical cost data, it was found that NN model showed more accurate estimation results than the RA and SVM models. Consequently, it is determined that NN model is most suitable for estimating the cost of school building projects.展开更多
For the regression model about longitudinal data, we combine the robust estimation equation with the elemental empirical likelihood method, and propose an efficient robust estimator, where the robust estimation equati...For the regression model about longitudinal data, we combine the robust estimation equation with the elemental empirical likelihood method, and propose an efficient robust estimator, where the robust estimation equation is based on bounded scoring function and the covariate depended weight function. This method reduces the influence of outliers in response variables and covariates on parameter estimation, takes into account the correlation between data, and improves the efficiency of estimation. The simulation results show that the proposed method is robust and efficient.展开更多
Studies in the coastal area of Bohai Bay,China,from July 2006 to October 2007,suggest that the method of meiofaunal biomass estimation affected the meiofaunal analysis.Conventional estimation methods that use a unique...Studies in the coastal area of Bohai Bay,China,from July 2006 to October 2007,suggest that the method of meiofaunal biomass estimation affected the meiofaunal analysis.Conventional estimation methods that use a unique mean individual weight value for nematodes to calculate total biomass may cause deviation of the results.A modified estimation method,named the Subsection Count Method (SCM),was also used to calculate meiofaunal biomass.This entails only a slight increase in workload but generates results of greater accuracy.Results gained using each of these two methods were compared in the present study.The results show that the conventional method generally estimates a meiofaunal biomass.The difference between the two estimation methods was highly significant (P<0.01) for the spring and winter cruises.Furthermore,the estimation method for meiofaunal biomass affected the analysis of horizontal distribution and correlation with environmental factors.These findings highlight the importance of estimation methods for meiofaunal biomass and will hopefully stimulate further investigation and discussion of the topic.展开更多
This paper addresses the performance of fast doubly selective fading channel estimation combined with InterCarrier Interference (ICI) cancellation for Long Term Evolution (LTE) communication platform in the High Speed...This paper addresses the performance of fast doubly selective fading channel estimation combined with InterCarrier Interference (ICI) cancellation for Long Term Evolution (LTE) communication platform in the High Speed Railway (HSR) environment. We consider the Channel Impulse Response (CIR) coefficients with a critical Doppler frequency shift and multi-path fading that were taken from the WINNER II channel model and the D2a propagation scenario, where the conditions of HSR are analyzed. As multi-path fading increases and the channel varies in the order of the symbol period, we first propose a novel approach for designing a pilot symbol structure in the time domain. Then, we describe the deployment of the proposed pilot symbol structure to estimate the channel in the time domain. Channel information corresponding to the data positions is obtained by linear interpolation. In each OFDM symbol, the slope and the initial value for establishing an interpolation function are estimated to adapt to the time variation of the channel. An accurate estimate of channel state information is used for the purpose of ICI cancellation. The simulation results show that the channel estimated by our proposed method can follow the real channel well, even in a very high Doppler frequency. The estimation method in terms of Mean Squared Error (MSE) significantly outperforms the state-of-the-art methods. The combination of our channel estimator with several interference cancelers provides a considerably better system performance than that achieved when frequency channel estimation is used.展开更多
In this paper, the problem of high mobility channel estimation in the Long-Term Evolution for Railway (LTE-R) communication system is investigated. By using a Basis Expansion Model (BEM), the channel impulse response ...In this paper, the problem of high mobility channel estimation in the Long-Term Evolution for Railway (LTE-R) communication system is investigated. By using a Basis Expansion Model (BEM), the channel impulse response is modeled as the sum of several basis functions multiplied by coefficients. By estimating the basis function coefficients, the fast time-varying channel can be approximated. In order to reduce the estimation error resulting from the high frequency basis function, the Generalized Complex Exponential BEM (GCE-BEM) is modified to form an Improved GCE-BEM (IGCE-BEM) by adding a correction coefficient to the basis function. Moreover, an Improved Baseline Tilting (IBT) method is proposed to reduce the Gibbs effect. In addition, linear interpolation, Gauss interpolation, and three-order Hermite interpolation are adopted to obtain the channel impulse response at non pilot locations based on the channel estimation results at pilot positions. The simulation results show that the IGCE-BEM outperforms the CE-BEM and GCE-BEM in terms of the Normalized Mean Squared Error (NMSE). The IB T method is better than the BT method in reducing the Gibbs effect. In addition, combined with the IBT, the IGCE-BEM also has low NMSE under high moving speed and high noise power. The performance of the threeorder Hermite interpolation method is higher than that of the linear interpolation and Gauss interpolation approaches.展开更多
Significant wave height is an important criterion in designing coastal and offshore structures.Based on the orthogonality principle, the linear mean square estimation method is applied to calculate significant wave he...Significant wave height is an important criterion in designing coastal and offshore structures.Based on the orthogonality principle, the linear mean square estimation method is applied to calculate significant wave height in this paper.Twenty-eight-year time series of wave data collected from three ocean buoys near San Francisco along the California coast are analyzed.It is proved theoretically that the computation error will be reduced by using as many measured data as possible for the calculation of significant wave height.Measured significant wave height at one buoy location is compared with the calculated value based on the data from two other adjacent buoys.The results indicate that the linear mean square estimation method can be well applied to the calculation and prediction of significant wave height in coastal regions.展开更多
Environmental uncertainty represents the limiting factor in matched-field localization. Within a Bayesian framework, both the environmental parameters, and the source parameters are considered to be unknown variables....Environmental uncertainty represents the limiting factor in matched-field localization. Within a Bayesian framework, both the environmental parameters, and the source parameters are considered to be unknown variables. However, including environmental parameters in multiple-source localization greatly increases the complexity and computational demands of the inverse problem. In the paper, the closed-form maximumlikelihood expressions for source strengths and noise variance at each frequency allow these parameters to be sampled implicitly, substantially reducing the dimensionality and difficulty of the inversion. This paper compares two Bayesian-point-estimation methods: the maximum a posteriori(MAP) approach and the marginal posterior probability density(PPD) approach to source localization. The MAP approach determines the sources locations by maximizing the PPD over all source and environmental parameters. The marginal PPD approach integrates the PPD over the unknowns to obtain a sequence of marginal probability distribution over source range or depth.Monte Carlo analysis of the two approaches for a test case involving both geoacoustic and water-column uncertainties indicates that:(1) For sensitive parameters such as source range, water depth and water sound speed, the MAP solution is better than the marginal PPD solution.(2) For the less sensitive parameters, such as,bottom sound speed, bottom density, bottom attenuation and water sound speed, when the SNR is low, the marginal PPD solution can better smooth the noise, which leads to better performance than the MAP solution.Since the source range and depth are sensitive parameters, the research shows that the MAP approach provides a slightly more reliable method to locate multiple sources in an unknown environment.展开更多
基金supported by the Innovation Fund Project of the Gansu Education Department(Grant No.2021B-099).
文摘The objective of reliability-based design optimization(RBDO)is to minimize the optimization objective while satisfying the corresponding reliability requirements.However,the nested loop characteristic reduces the efficiency of RBDO algorithm,which hinders their application to high-dimensional engineering problems.To address these issues,this paper proposes an efficient decoupled RBDO method combining high dimensional model representation(HDMR)and the weight-point estimation method(WPEM).First,we decouple the RBDO model using HDMR and WPEM.Second,Lagrange interpolation is used to approximate a univariate function.Finally,based on the results of the first two steps,the original nested loop reliability optimization model is completely transformed into a deterministic design optimization model that can be solved by a series of mature constrained optimization methods without any additional calculations.Two numerical examples of a planar 10-bar structure and an aviation hydraulic piping system with 28 design variables are analyzed to illustrate the performance and practicability of the proposed method.
基金the Humanities and Social Science Fund of the Ministry of Education of China(21YJAZH077)。
文摘In a crowd density estimation dataset,the annotation of crowd locations is an extremely laborious task,and they are not taken into the evaluation metrics.In this paper,we aim to reduce the annotation cost of crowd datasets,and propose a crowd density estimation method based on weakly-supervised learning,in the absence of crowd position supervision information,which directly reduces the number of crowds by using the number of pedestrians in the image as the supervised information.For this purpose,we design a new training method,which exploits the correlation between global and local image features by incremental learning to train the network.Specifically,we design a parent-child network(PC-Net)focusing on the global and local image respectively,and propose a linear feature calibration structure to train the PC-Net simultaneously,and the child network learns feature transfer factors and feature bias weights,and uses the transfer factors and bias weights to linearly feature calibrate the features extracted from the Parent network,to improve the convergence of the network by using local features hidden in the crowd images.In addition,we use the pyramid vision transformer as the backbone of the PC-Net to extract crowd features at different levels,and design a global-local feature loss function(L2).We combine it with a crowd counting loss(LC)to enhance the sensitivity of the network to crowd features during the training process,which effectively improves the accuracy of crowd density estimation.The experimental results show that the PC-Net significantly reduces the gap between fullysupervised and weakly-supervised crowd density estimation,and outperforms the comparison methods on five datasets of Shanghai Tech Part A,ShanghaiTech Part B,UCF_CC_50,UCF_QNRF and JHU-CROWD++.
基金supported by the National Magnetic Confinement Fusion Energy R&D Program of China(Nos.2022YFE03030001,2022YFE03020004,2022YFE 03050003)National Natural Science Foundation of China(Nos.12275310,11975275,12175277,11975271)+2 种基金the Science Foundation of Institute of Plasma Physics,Chinese Academy of Sciences(No.DSJJ-2021-01)the Collaborative Innovation Program of Hefei Science Center,Chinese Academy of Sciences(No.2021HSC-CIP019)the Users with Excellence Program of Hefei Science Center,Chinese Academy of Sciences(Nos.2021HSC-UE014,2021HSCUE012)。
文摘A gas puff imaging(GPI)diagnostic has been developed and operated on EAST since 2012,and the time-delay estimation(TDE)method is used to derive the propagation velocity of fluctuations from the two-dimensional GPI data.However,with the TDE method it is difficult to analyze the data with fast transient events,such as edge-localized mode(ELM).Consequently,a method called the spatial displacement estimation(SDE)algorithm is developed to estimate the turbulence velocity with high temporal resolution.Based on the SDE algorithm,we make some improvements,including an adaptive median filter and super-resolution technology.After the development of the algorithm,a straight-line movement and a curved-line movement are used to test the accuracy of the algorithm,and the calculated speed agrees well with preset speed.This SDE algorithm is applied to the EAST GPI data analysis,and the derived propagation velocity of turbulence is consistent with that from the TDE method,but with much higher temporal resolution.
基金supported in part by the National Science Fund for Excel-lent Young Scholars(No.62222113)in part by the joint Funds of the National Natural Science Foundation of China(No.U22B2015)+1 种基金in part by the stabilization support of National Radar Signal Processing Laboratory(No.KGJ202203)in part by the Fundamental Research Funds for the Central Universities(No.ZDRC2004).
文摘The existing direction-of-arrival(DOA)estimation methods only utilize the current received signals,which are susceptible to noise.In this paper,a method for DOA estimation based on a motion platform is proposed to achieve high-precision DOA estimation by utilizing past and present signals.The concept of synthetic aperture is introduced to construct a linear DOA estima-tion model.A DOA fine-tuning method based on the linear model is proposed to eliminate the lin-ear DOA variation,achieving a non-coherent accumulation of DOA estimations.Moreover,the baseband modulation and the phase modulation caused by the range history are compensated to achieve the coherent accumulation of all the DOA estimations.Simulation results show that the proposed method can significantly improve the DOA estimated accuracy at low signal-to-noise ratios(SNR).
基金supported by the State Grid Corporation of China Headquarters Management Science and Technology Project(No.526620200008).
文摘The application of traditional synchronous measurement methods is limited by frequent fluctuations of electrical signals and complex frequency components in distribution networks.Therefore,it is critical to find solutions to the issues of multifrequency parameter estimation and synchronous measurement estimation accuracy in the complex environment of distribution networks.By utilizing the multifrequency sensing capabilities of discrete Fourier transform signals and Taylor series for dynamic signal processing,a multifrequency signal estimation approach based on HT-IpDFT-STWLS(HIpST)for distribution networks is provided.First,by introducing the Hilbert transform(HT),the influence of noise on the estimation algorithm is reduced.Second,signal frequency components are obtained on the basis of the calculated signal envelope spectrum,and the interpolated discrete Fourier transform(IpDFT)frequency coarse estimation results are used as the initial values of symmetric Taylor weighted least squares(STWLS)to achieve high-precision parameter estimation under the dynamic changes of the signal,and the method increases the number of discrete Fourier.Third,the accuracy of this proposed method is verified by simulation analysis.Data show that this proposed method can accurately achieve the parameter estimation of multifrequency signals in distribution networks.This approach provides a solution for the application of phasor measurement units in distribution networks.
基金supported by the National Natural Science Foundation of China(6193101562071335)+1 种基金the Technological Innovation Project of Hubei Province of China(2019AAA061)the Natural Science F oundation of Hubei Province of China(2021CFA002)。
文摘In this paper,we study the accuracy of delay-Doppler parameter estimation of targets in a passive radar using orthogonal frequency division multiplexing(OFDM)signal.A coarse-fine joint estimation method is proposed to achieve better estimation accuracy of target parameters without excessive computational burden.Firstly,the modulation symbol domain(MSD)method is used to roughly estimate the delay and Doppler of targets.Then,to obtain high-precision Doppler estimation,the atomic norm(AN)based on the multiple measurement vectors(MMV)model(MMV-AN)is used to manifest the signal sparsity in the continuous Doppler domain.At the same time,a reference signal compensation(RSC)method is presented to obtain highprecision delay estimation.Simulation results based on the OFDM signal show that the coarse-fine joint estimation method based on AN-RSC can obtain a more accurate estimation of target parameters compared with other algorithms.In addition,the proposed method also possesses computational advantages compared with the joint parameter estimation.
基金This research was supported by the National Natural Science Foundation of China(No.42274141)Science Foundation of China University of Petroleum,Beijing(No.2462020YXZZ007).
文摘Dispersion and attenuation analysis can be used to determine formation anisotropy induced by fractures,or stresses.In this paper,we propose a nonparametric spectrum estimation method to get phase dispersion characteristics and attenuation coefficient.By designing an appropriate vector filter,phase velocity,attenuation coefficient and amplitude can be inverted from the waveform recorded by the receiver array.Performance analysis of this algorithm is compared with Extended Prony Method(EPM)and Forward and Backward Matrix Pencil(FBMP)method.Based on the analysis results,the proposed method is capable of achieving high resolution and precision as the parametric spectrum estimation methods.At the meantime,it also keeps high stability as the other nonparametric spectrum estimation methods.At last,applications to synthetic waveforms modeled using finite difference method and real data show its efficiency.The real data processing results show that the P-wave attenuation log is more sensitive to oil formation compared to S-wave;and the S-wave attenuation log is more sensitive to shale formation compared to P-wave.
基金Project supported by the National Natural Science Foundation of China(Grant No.61973037)。
文摘In view of the complexity of existing linear frequency modulation(LFM)signal parameter estimation methods and the poor antinoise performance and estimation accuracy under a low signal-to-noise ratio(SNR),a parameter estimation method for LFM signals with a Duffing oscillator based on frequency periodicity is proposed in this paper.This method utilizes the characteristic that the output signal of the Duffing oscillator excited by the LFM signal changes periodically with frequency,and the modulation period of the LFM signal is estimated by autocorrelation processing of the output signal of the Duffing oscillator.On this basis,the corresponding relationship between the reference frequency of the frequencyaligned Duffing oscillator and the frequency range of the LFM signal is analyzed by the periodic power spectrum method,and the frequency information of the LFM signal is determined.Simulation results show that this method can achieve high-accuracy parameter estimation for LFM signals at an SNR of-25 dB.
基金This research was supported by the China National Railway Group Co.,Ltd.Research and Development Project(N2022T008).
文摘Purpose–The study aims to provide a basis for the effective use of safety-related information data and a quantitative assessment way for the occurrence probability of the safety risk such as the fatigue fracture of the key components.Design/methodology/approach–The fatigue crack growth rate is of dispersion,which is often used to accurately describe with probability density.In view of the external dispersion caused by the load,a simple and applicable probability expression of fatigue crack growth rate is adopted based on the fatigue growth theory.Considering the isolation among the pairs of crack length a and crack formation time t(a∼t data)obtained from same kind of structural parts,a statistical analysis approach of t distribution is proposed,which divides the crack length in several segments.Furthermore,according to the compatibility criterion of crack growth,that is,there is statistical development correspondence among a∼t data,the probability model of crack growth rate is established.Findings–The results show that the crack growth rate in the stable growth stage can be approximately expressed by the crack growth control curve da/dt=5 Q•a,and the probability density of the crack growth parameter Q represents the external dispersion;t follows two-parameter Weibull distribution in certain a values.Originality/value–The probability density f(Q)can be estimated by using the probability model of crack growth rate,and a calculation example shows that the estimation method is effective and practical.
文摘Contrary to the other multi-carrier modulation systems, the coherent optical orthogonal frequency division multiplexing communication system with an offset quadrature amplitude modulation (CO-OFDM-OQAM) possesses inherent imaginary interference (IMI). This has an important impact on the channel estimation process. Currently, a variety of frequency-domain channel estimation methods have been proposed. However, there are various problems that still exist. For instance, in order to reduce the influence of IMI, it is necessary to insert more guard intervals between the training sequence and the payload, leading to the occupation of excessive spectrum resources. In order to address this problem, this work designs a high spectral efficient frequency-domain channel estimation method for the polarization-division-multiplexing CO-OFDM-OQAM systems. First, the working principle of the proposed method is described in detail. Then, its spectral efficiency, power peak-to-average ratio, and channel estimation performance are studied based on simulations. The simulation results show that the proposed method improves the spectral efficiency without worsening the power peak-to-average ratio. The channel estimation capability of this method is verified in three scenarios of long-distance transmissions, including back-to-back, 100 km, and 200 km transmissions. .
基金Sponsored by Applied Basic Research Project for Young Scholars of Shihezi University(2015ZRKXYQ06)Project of International Cooperation and Exchanges of China(2015DFA11660)
文摘Based on the main research results of estimation methods of surface solar radiation at home and abroad in recent decades, three commonly used estimation models of surface solar radiation have been introduced, and their principles, advantages and disadvantages have been analyzed to provide scientific references for further study of surface solar radiation in future.
基金the National Natural Science Foundation of China
文摘According,to the principle, "The failure data is the basis of software reliability analysis", we built a software reliability expert system (SRES) by adopting the artificial intelligence technology. By reasoning out the conclusion from the fitting results of failure data of a software project, the SRES can recommend users "the most suitable model" as a software reliability measurement model. We believe that the SRES can overcome the inconsistency in applications of software reliability models well. We report investigation results of singularity and parameter estimation methods of experimental models in SRES.
文摘Previous works mainly focused on estimating direct relationship strength in social networks. If two users are not directly connected in a social network, there is no direct relationship. In order to estimate the relationship strength between two indirectly connected users as well as directly connected users, this paper proposes an estimation method for relationship strength in weighted social network graphs, which is based on the trust propagation strategy and the estimation of direct relationship strength. Our method considers the length of a relationship path, the number of relationship paths and the edge weights (direct relationship strength) along with a relationship path to estimate the strength of indirect relationship. Then it synthesizes the direct and indirect relationship strength to represent the strength of relationship between two users in social net- works. Thus our method can fully estimate the relationship strength between any two users in a social network no matter whether they are directly connected or not.
文摘Accurate cost estimation at the early stage of a construction project is key factor in a project’s success. But it is difficult to quickly and accurately estimate construction costs at the planning stage, when drawings, documentation and the like are still incomplete. As such, various techniques have been applied to accurately estimate construction costs at an early stage, when project information is limited. While the various techniques have their pros and cons, there has been little effort made to determine the best technique in terms of cost estimating performance. The objective of this research is to compare the accuracy of three estimating techniques (regression analysis (RA), neural network (NN), and support vector machine techniques (SVM)) by performing estimations of construction costs. By comparing the accuracy of these techniques using historical cost data, it was found that NN model showed more accurate estimation results than the RA and SVM models. Consequently, it is determined that NN model is most suitable for estimating the cost of school building projects.
文摘For the regression model about longitudinal data, we combine the robust estimation equation with the elemental empirical likelihood method, and propose an efficient robust estimator, where the robust estimation equation is based on bounded scoring function and the covariate depended weight function. This method reduces the influence of outliers in response variables and covariates on parameter estimation, takes into account the correlation between data, and improves the efficiency of estimation. The simulation results show that the proposed method is robust and efficient.
基金Supported by Chinese Offshore Investigation and Assessment Project (No. 908-TJ-10,908-TJ-09)the Initial Fund for Introduced Talent of Tianjin University of Science and Technology (No. 20090413)
文摘Studies in the coastal area of Bohai Bay,China,from July 2006 to October 2007,suggest that the method of meiofaunal biomass estimation affected the meiofaunal analysis.Conventional estimation methods that use a unique mean individual weight value for nematodes to calculate total biomass may cause deviation of the results.A modified estimation method,named the Subsection Count Method (SCM),was also used to calculate meiofaunal biomass.This entails only a slight increase in workload but generates results of greater accuracy.Results gained using each of these two methods were compared in the present study.The results show that the conventional method generally estimates a meiofaunal biomass.The difference between the two estimation methods was highly significant (P<0.01) for the spring and winter cruises.Furthermore,the estimation method for meiofaunal biomass affected the analysis of horizontal distribution and correlation with environmental factors.These findings highlight the importance of estimation methods for meiofaunal biomass and will hopefully stimulate further investigation and discussion of the topic.
文摘This paper addresses the performance of fast doubly selective fading channel estimation combined with InterCarrier Interference (ICI) cancellation for Long Term Evolution (LTE) communication platform in the High Speed Railway (HSR) environment. We consider the Channel Impulse Response (CIR) coefficients with a critical Doppler frequency shift and multi-path fading that were taken from the WINNER II channel model and the D2a propagation scenario, where the conditions of HSR are analyzed. As multi-path fading increases and the channel varies in the order of the symbol period, we first propose a novel approach for designing a pilot symbol structure in the time domain. Then, we describe the deployment of the proposed pilot symbol structure to estimate the channel in the time domain. Channel information corresponding to the data positions is obtained by linear interpolation. In each OFDM symbol, the slope and the initial value for establishing an interpolation function are estimated to adapt to the time variation of the channel. An accurate estimate of channel state information is used for the purpose of ICI cancellation. The simulation results show that the channel estimated by our proposed method can follow the real channel well, even in a very high Doppler frequency. The estimation method in terms of Mean Squared Error (MSE) significantly outperforms the state-of-the-art methods. The combination of our channel estimator with several interference cancelers provides a considerably better system performance than that achieved when frequency channel estimation is used.
基金the National Natural Science Foundation of China (No. U1405251, No. 61401100, No. 61601126, and No. 61571129)the Natural Science Foundation of Fujian Province (No. 2015J05122).
文摘In this paper, the problem of high mobility channel estimation in the Long-Term Evolution for Railway (LTE-R) communication system is investigated. By using a Basis Expansion Model (BEM), the channel impulse response is modeled as the sum of several basis functions multiplied by coefficients. By estimating the basis function coefficients, the fast time-varying channel can be approximated. In order to reduce the estimation error resulting from the high frequency basis function, the Generalized Complex Exponential BEM (GCE-BEM) is modified to form an Improved GCE-BEM (IGCE-BEM) by adding a correction coefficient to the basis function. Moreover, an Improved Baseline Tilting (IBT) method is proposed to reduce the Gibbs effect. In addition, linear interpolation, Gauss interpolation, and three-order Hermite interpolation are adopted to obtain the channel impulse response at non pilot locations based on the channel estimation results at pilot positions. The simulation results show that the IGCE-BEM outperforms the CE-BEM and GCE-BEM in terms of the Normalized Mean Squared Error (NMSE). The IB T method is better than the BT method in reducing the Gibbs effect. In addition, combined with the IBT, the IGCE-BEM also has low NMSE under high moving speed and high noise power. The performance of the threeorder Hermite interpolation method is higher than that of the linear interpolation and Gauss interpolation approaches.
基金support for this study was provided by the National Natural Science Foundation of China (No.40776006)Research Fund for the Doctoral Program of Higher Education of China (Grant No.20060423009)the Science and Technology Development Program of Shandong Province (Grant No.2008GGB01099)
文摘Significant wave height is an important criterion in designing coastal and offshore structures.Based on the orthogonality principle, the linear mean square estimation method is applied to calculate significant wave height in this paper.Twenty-eight-year time series of wave data collected from three ocean buoys near San Francisco along the California coast are analyzed.It is proved theoretically that the computation error will be reduced by using as many measured data as possible for the calculation of significant wave height.Measured significant wave height at one buoy location is compared with the calculated value based on the data from two other adjacent buoys.The results indicate that the linear mean square estimation method can be well applied to the calculation and prediction of significant wave height in coastal regions.
基金The National Natural Science Foundation of China under contract No.11704225the Shandong Provincial Natural Science Foundation under contract No.ZR2016AQ23+1 种基金the State Key Laboratory of Acoustics of Chinese Academy of Sciences under contract No.SKLA201704the National Programe on Global Change and Air-Sea Interaction
文摘Environmental uncertainty represents the limiting factor in matched-field localization. Within a Bayesian framework, both the environmental parameters, and the source parameters are considered to be unknown variables. However, including environmental parameters in multiple-source localization greatly increases the complexity and computational demands of the inverse problem. In the paper, the closed-form maximumlikelihood expressions for source strengths and noise variance at each frequency allow these parameters to be sampled implicitly, substantially reducing the dimensionality and difficulty of the inversion. This paper compares two Bayesian-point-estimation methods: the maximum a posteriori(MAP) approach and the marginal posterior probability density(PPD) approach to source localization. The MAP approach determines the sources locations by maximizing the PPD over all source and environmental parameters. The marginal PPD approach integrates the PPD over the unknowns to obtain a sequence of marginal probability distribution over source range or depth.Monte Carlo analysis of the two approaches for a test case involving both geoacoustic and water-column uncertainties indicates that:(1) For sensitive parameters such as source range, water depth and water sound speed, the MAP solution is better than the marginal PPD solution.(2) For the less sensitive parameters, such as,bottom sound speed, bottom density, bottom attenuation and water sound speed, when the SNR is low, the marginal PPD solution can better smooth the noise, which leads to better performance than the MAP solution.Since the source range and depth are sensitive parameters, the research shows that the MAP approach provides a slightly more reliable method to locate multiple sources in an unknown environment.
