A hierarchical reduced graphene oxide-MnO_(2)@polypyrrole coaxial nanotube composite hydrogel was prepared via oxidative polymerization of pyrrole in the presence of MnO_(2)nanotubes,followed by the hydrothermal treat...A hierarchical reduced graphene oxide-MnO_(2)@polypyrrole coaxial nanotube composite hydrogel was prepared via oxidative polymerization of pyrrole in the presence of MnO_(2)nanotubes,followed by the hydrothermal treatment of graphene oxide and MnO_(2)@polypyrrole coaxial nanotubes.The stable composite hydrogel with a hierarchical network was composed of one-dimensional MnO_(2)@polypyrrole coaxial nanotube and two-dimensional graphene nanosheet and characterized by scanning electron microscope,Fourier transform infrared spectroscopy,X-ray diffraction,Brunauer-Emmett-Teller surface,and X-ray photoelectron spectroscopy measurements.The composite hydrogel can be used as an efficient adsorbent for Cr(Ⅵ)removal due to the synergistic interaction between graphene and MnO_(2)@polypyrrole and the hierarchical structure of the hydrogel.Moreover,the composite hydrogel is easily separated because of its stable monolith,and it is reusable(76.8%of removal ability remaining after five adsorption-desorption cycles).The simple fabrication and cost-effective separation process together with the excellent absorption performance endow the composite hydrogel with great potential for practical wastewater treatment.展开更多
For a highly efficient recycling of a wastewater containing a high concentration of MgCl_(2),Al(Ⅲ)and P507 were scheduled to be removed in advance.In this study,the in-situ removal of Al(Ⅲ)and P507 from a high conce...For a highly efficient recycling of a wastewater containing a high concentration of MgCl_(2),Al(Ⅲ)and P507 were scheduled to be removed in advance.In this study,the in-situ removal of Al(Ⅲ)and P507 from a high concentration MgCl_(2)solution at different pH values and Al/P molar ratios was investigated.The results showed that P507 formed organic complexes of Al_(x)(OH)_y^(Z+)-P507 at pH of 2.0-4.0.At pH of 4.0-5.0,Al(Ⅲ)precipitated and transferred into Al(OH)_(3)with a flocculent amorphous morphology.Active sites on the Al(OH)_(3)surface enhanced the removal efficiency of P507.At pH of 6.0-6.5,Al(Ⅲ)and Mg(Ⅱ)formed layered crystalline Al(OH)_(3)and MgAl_(2)(OH)_(8with)small pore channels and fewer active sites,resulting in a reduced removal efficiency of P507.When the Al/P molar ratio exceeded 13 and the pH was between 4.0 and 5.0,the removal rates of both Al(Ⅲ)and P507 were higher than98%,while the concentration loss of Mg(Ⅱ)was only 0.2%-0.9%.展开更多
This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting co...This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO<sub>2</sub> nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO<sub>2</sub> composite fibers in the photocatalytic removal of aqueous under UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO<sub>2</sub> composite fibers as promising photocatalysts for ammonia removal in water treatment applications.展开更多
Novel graphitic carbon nitride(g-C_(3)N_(4))nanosheet/Bi_(5)O_(7)Br/NH_(2)-MIL-88B(Fe)photocatalysts(denoted as GCN-NSh/Bi_(5)O_(7)Br/FeMOF,in which MOF is metal–organic framework)with double S-scheme heterojunctions...Novel graphitic carbon nitride(g-C_(3)N_(4))nanosheet/Bi_(5)O_(7)Br/NH_(2)-MIL-88B(Fe)photocatalysts(denoted as GCN-NSh/Bi_(5)O_(7)Br/FeMOF,in which MOF is metal–organic framework)with double S-scheme heterojunctions were synthesized by a facile solvothermal route.The resultant materials were examined by X-ray photoelectron spectrometer(XPS),X-ray diffraction(XRD),scanning electron microscopy(SEM),energy dispersive X-ray spectroscopy(EDX),transmission electron microscopy(TEM),high-resolution transmission electron microscopy(HRTEM),photoluminescence spectroscopy(PL),Fourier transform infrared spectroscopy(FT-IR),UV-Vis diffuse reflection spectroscopy(UV-vis DRS),photocurrent density,electrochemical impedance spectroscopy(EIS),and Brunauer–Emmett–Teller(BET)analyses.After the integration of Fe-MOF with GCN-NSh/Bi_(5)O_(7)Br,the removal constant of tetracycline over the optimal GCN-NSh/Bi_(5)O_(7)Br/Fe-MOF(15wt%)nanocomposite was promoted 33 times compared with that of the pristine GCN.The GCN-NSh/Bi_(5)O_(7)Br/Fe-MOF(15wt%)nanocomposite showed superior photoactivity to azithromycin,metronidazole,and cephalexin removal that was 36.4,20.2,and 14.6 times higher than that of pure GCN,respectively.Radical quenching tests showed that·O_(2)-and h+mainly contributed to the elimination reaction.In addition,the nanocomposite maintained excellent activity after 4 successive cycles.Based on the developed n–n heterojunctions among n-GCN-NSh,n-Bi_(5)O_(7)Br,and n-Fe-MOF semiconductors,the double S-scheme charge transfer mechanism was proposed for the destruction of the selected antibiotics.展开更多
基金Funded by the Open/Innovation Fund of Hubei Three Gorges Laboratory(No.SK212002)。
文摘A hierarchical reduced graphene oxide-MnO_(2)@polypyrrole coaxial nanotube composite hydrogel was prepared via oxidative polymerization of pyrrole in the presence of MnO_(2)nanotubes,followed by the hydrothermal treatment of graphene oxide and MnO_(2)@polypyrrole coaxial nanotubes.The stable composite hydrogel with a hierarchical network was composed of one-dimensional MnO_(2)@polypyrrole coaxial nanotube and two-dimensional graphene nanosheet and characterized by scanning electron microscope,Fourier transform infrared spectroscopy,X-ray diffraction,Brunauer-Emmett-Teller surface,and X-ray photoelectron spectroscopy measurements.The composite hydrogel can be used as an efficient adsorbent for Cr(Ⅵ)removal due to the synergistic interaction between graphene and MnO_(2)@polypyrrole and the hierarchical structure of the hydrogel.Moreover,the composite hydrogel is easily separated because of its stable monolith,and it is reusable(76.8%of removal ability remaining after five adsorption-desorption cycles).The simple fabrication and cost-effective separation process together with the excellent absorption performance endow the composite hydrogel with great potential for practical wastewater treatment.
基金financial supports from the National Key Research and Development Program of China(No.2022YFB3504501)the National Natural Science Foundation of China(Nos.52274355,91962211)the Gansu Province Science and Technology Major Special Project,China(No.22ZD6GD061)。
文摘For a highly efficient recycling of a wastewater containing a high concentration of MgCl_(2),Al(Ⅲ)and P507 were scheduled to be removed in advance.In this study,the in-situ removal of Al(Ⅲ)and P507 from a high concentration MgCl_(2)solution at different pH values and Al/P molar ratios was investigated.The results showed that P507 formed organic complexes of Al_(x)(OH)_y^(Z+)-P507 at pH of 2.0-4.0.At pH of 4.0-5.0,Al(Ⅲ)precipitated and transferred into Al(OH)_(3)with a flocculent amorphous morphology.Active sites on the Al(OH)_(3)surface enhanced the removal efficiency of P507.At pH of 6.0-6.5,Al(Ⅲ)and Mg(Ⅱ)formed layered crystalline Al(OH)_(3)and MgAl_(2)(OH)_(8with)small pore channels and fewer active sites,resulting in a reduced removal efficiency of P507.When the Al/P molar ratio exceeded 13 and the pH was between 4.0 and 5.0,the removal rates of both Al(Ⅲ)and P507 were higher than98%,while the concentration loss of Mg(Ⅱ)was only 0.2%-0.9%.
文摘This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO<sub>2</sub> nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO<sub>2</sub> composite fibers in the photocatalytic removal of aqueous under UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO<sub>2</sub> composite fibers as promising photocatalysts for ammonia removal in water treatment applications.
文摘Novel graphitic carbon nitride(g-C_(3)N_(4))nanosheet/Bi_(5)O_(7)Br/NH_(2)-MIL-88B(Fe)photocatalysts(denoted as GCN-NSh/Bi_(5)O_(7)Br/FeMOF,in which MOF is metal–organic framework)with double S-scheme heterojunctions were synthesized by a facile solvothermal route.The resultant materials were examined by X-ray photoelectron spectrometer(XPS),X-ray diffraction(XRD),scanning electron microscopy(SEM),energy dispersive X-ray spectroscopy(EDX),transmission electron microscopy(TEM),high-resolution transmission electron microscopy(HRTEM),photoluminescence spectroscopy(PL),Fourier transform infrared spectroscopy(FT-IR),UV-Vis diffuse reflection spectroscopy(UV-vis DRS),photocurrent density,electrochemical impedance spectroscopy(EIS),and Brunauer–Emmett–Teller(BET)analyses.After the integration of Fe-MOF with GCN-NSh/Bi_(5)O_(7)Br,the removal constant of tetracycline over the optimal GCN-NSh/Bi_(5)O_(7)Br/Fe-MOF(15wt%)nanocomposite was promoted 33 times compared with that of the pristine GCN.The GCN-NSh/Bi_(5)O_(7)Br/Fe-MOF(15wt%)nanocomposite showed superior photoactivity to azithromycin,metronidazole,and cephalexin removal that was 36.4,20.2,and 14.6 times higher than that of pure GCN,respectively.Radical quenching tests showed that·O_(2)-and h+mainly contributed to the elimination reaction.In addition,the nanocomposite maintained excellent activity after 4 successive cycles.Based on the developed n–n heterojunctions among n-GCN-NSh,n-Bi_(5)O_(7)Br,and n-Fe-MOF semiconductors,the double S-scheme charge transfer mechanism was proposed for the destruction of the selected antibiotics.
