The influence of calcium sulfate state and fineness of cement on hydration of Portland cement was studied using electrical resistivity measurement. The bulk resistivity curve of the paste from the abnormal cement main...The influence of calcium sulfate state and fineness of cement on hydration of Portland cement was studied using electrical resistivity measurement. The bulk resistivity curve of the paste from the abnormal cement mainly with hemihydrate had a characteristic abnormal peak and rapid increase in early period. The resistivity measurement technique can be used to discriminate abnormal setting. For normal cement with gypsum, the increase in fineness of the Portland cement decreases the minimum resistivhy due to a higher ionic concentration and increases the 24 hour resistivity due to a reduction in macroscopic pore size. The setting time, compressive strength, pore structure of pastes made from different cements were carried out to compare the influence of water to cement ratio, calcium sulfate state and fineness. It is found that the electrical and mechanical properties are strongly affected by the initial porosity, the presence of hemihydrate or gypsum, and the fineness of cement.展开更多
Cotton,the most important natural fiber crop in the world,is a mainstay in China's economy.However,for over two decades,cotton yields both in China and U.S.have been at a plateau.
In recent years, the usages of by-products and wastes in industry have become more important. The importance of the sustainable development is also of increasing. The utilizations of wastes, as mineral admixture or fi...In recent years, the usages of by-products and wastes in industry have become more important. The importance of the sustainable development is also of increasing. The utilizations of wastes, as mineral admixture or fine aggregate, reduce the consumption of the natural resources and improve the durability of concrete. In this study, the effect of the fineness on the high temperature and sulphate resistances of concrete mortar specimens, produced with ground granulated blast-furnace slag (GBFS) replacing cement, is investigated. The compressive and flexural strength test results for all series related to durability effects, exposing temperature and solutions, exposure times for these durability effects, slag content and fineness are discussed. Conse- quently, the optimum slag contents are determined for producing the sulphate and high temperature resistant mortars.展开更多
The effect of trace Ti and Y on Au-based alloys with 990 fineness has beeninvestigated systematically by means of tensile test, hardness test, scanning and transmissionelectron microscopic analyses. These experimental...The effect of trace Ti and Y on Au-based alloys with 990 fineness has beeninvestigated systematically by means of tensile test, hardness test, scanning and transmissionelectron microscopic analyses. These experimental results show that trace Ti and Y can significantlyimprove the mechanical properties of Au-based alloys with 990 fineness because Ti and Y cansignificantly refine matrix grains, and solid solution strengthening, work strengthening andprecipitation strengthening occur during mechanical heat treatment.展开更多
The effect of the content and specific surface area of the ground granulated blast furnace slag (GGBS) on the pore structure of the cement paste was determined through the low-field nuclear magnetic resonance (NMR).Th...The effect of the content and specific surface area of the ground granulated blast furnace slag (GGBS) on the pore structure of the cement paste was determined through the low-field nuclear magnetic resonance (NMR).The Pearson correlation analysis method was used to calculate the correlation coefficient between the porosity and age of cement paste,the specific surface area of GGBS and the content of GGBS.The test results exhibited that the porosity of the cement paste with different ageing durations gradually decreased on increasing the content and specific surface area of GGBS.The content and specific surface area of GGBS had a negligible effect on the 1-10 nm size gel pores in the cement paste,whereas,had a significant effect on the 10-100 nm size capillary pores.In addition,these parameters did not affect the final most probable pore size of the cement paste.The correlation between age and porosity was the largest,and the correlation between GGBS content and porosity was greater than that between GGBS specific surface area and porosity.Moreover,a modified pore structure model was successfully developed to effectively predict the pore structure of the GGBS based cement paste.展开更多
The paper deals with the theoretic relationship betweenfineness of man-made fibers blended with natural fibersand regularities of the yarns made from them.Throughestablishment of the theory model and digitally analysi...The paper deals with the theoretic relationship betweenfineness of man-made fibers blended with natural fibersand regularities of the yarns made from them.Throughestablishment of the theory model and digitally analysisusing Matlab software,the optimum fineness of the fi-bers could be figured out.展开更多
Soyang Lake is the largest lake in Republic of Korea bordering Chuncheon,Yanggu,and Inje in Gangwon Province.It is widely used as an environmental resource for hydropower,flood control,and water supply.Therefore,we co...Soyang Lake is the largest lake in Republic of Korea bordering Chuncheon,Yanggu,and Inje in Gangwon Province.It is widely used as an environmental resource for hydropower,flood control,and water supply.Therefore,we conducted a survey of the floodplain of Soyang Lake to analyze the sediments in the area.We used global positioning system(GPS)data and aerial photography to monitor sediment deposits in the Soyang Lake floodplain.Data from three GPS units were compared to determine the accuracy of sampling location measurement.Sediment samples were collected at three sites:two in the eastern region of the floodplain and one in the western region.A total of eight samples were collected:Three samples were collected at 10 cm intervals to a depth of 30 cm from each site of the eastern sampling point,and two samples were collected at depths of 10 and 30 cm at the western sampling point.Samples were collected and analyzed for vertical and horizontal trends in particle size and moisture content.The sizes of the sediment samples ranged from coarse to very coarse sediments with a negative slope,which indicate eastward movement from the breach.The probability of a breach was indicated by the high water content at the eastern side of the floodplain,with the eastern sites showing a higher probability than the western sites.The results of this study indicate that analyses of grain fineness,moisture content,sediment deposits,and sediment removal rates can be used to understand and predict the direction of breach movement and sediment distribution in Soyang Lake.展开更多
In order to precisely measure the diameters for obtaining the fineness of rolling raw silk, the physical features of raw silk are analyzed. By means of Fresnel principle, diffractions caused by different transparent r...In order to precisely measure the diameters for obtaining the fineness of rolling raw silk, the physical features of raw silk are analyzed. By means of Fresnel principle, diffractions caused by different transparent raw silk filaments are analyzed and simulated. Image data of raw silk filament measured by digital CMOS camera are analyzed and processed for obtaining the precise diameters of the filamerit with the relative error of less than 1%. On the assumption of appropriate elliptic cross-section of the filament, the cross-section area is calculated as the fineness of the filament. Measurement experiments are carded out. Finally, some suggestions are proposed for photoelectric measuring the fineness of raw silk.展开更多
The effect of a machine feeding rate(FR;1,1.5 and 2 Mg/h)and/or three levels of selected fineness degree(FD;3,5 and 7 mm)on machine performance,pellet physical parameters,required energy and production cost of three m...The effect of a machine feeding rate(FR;1,1.5 and 2 Mg/h)and/or three levels of selected fineness degree(FD;3,5 and 7 mm)on machine performance,pellet physical parameters,required energy and production cost of three main types of broilers diets were examined in this experiment.The examined broiler diets were formulated to meet the Ross 308 strain requirements.A complete factorial design(3×3×3)was used to identify the effects of studied factors on the pellet mill machine and pellet production.The obtained results indicated that the pellet mill productivity significantly(p˂0.001)improved through increased pellet mill feeding rate level.In addition,the machine pelleting efficiency was found to be significantly affected by all studied variables and their interactions.While the total power consumption of the machine showed no variations under the impact of the tested factors or with any of their combinations.Regarding the pellet physical quality indices,all broiler diets with all selected FD and lower FR had the maximum durability and bulk density levels.Furthermore,lower feeding rates were associated with higher hardness degrees.The lowest production costs were substantially correlated with high FR and intermediate FD(5 mm).Furthermore,production costs were determined to be reduced in finisher broiler diets under different feeding rates.Moreover,manufacturing costs of finisher broiler meals were observed to decrease in several feeding rates.Overall,these findings indicate the capabilities of producing high-quality pellets and reducing the needed production costs by optimizing feeding rates to 2 Mg/h and 2 mm fineness in broiler diets.展开更多
Coal gasification fine slag(FS)is a typical solid waste generated in coal gasification.Its current disposal methods of stockpil-ing and landfilling have caused serious soil and ecological hazards.Separation recovery a...Coal gasification fine slag(FS)is a typical solid waste generated in coal gasification.Its current disposal methods of stockpil-ing and landfilling have caused serious soil and ecological hazards.Separation recovery and the high-value utilization of residual carbon(RC)in FS are the keys to realizing the win-win situation of the coal chemical industry in terms of economic and environmental benefits.The structural properties,such as pore,surface functional group,and microcrystalline structures,of RC in FS(FS-RC)not only affect the flotation recovery efficiency of FS-RC but also form the basis for the high-value utilization of FS-RC.In this paper,the characteristics of FS-RC in terms of pore structure,surface functional groups,and microcrystalline structure are sorted out in accordance with gasification type and FS particle size.The reasons for the formation of the special structural properties of FS-RC are analyzed,and their influence on the flotation separation and high-value utilization of FS-RC is summarized.Separation methods based on the pore structural characterist-ics of FS-RC,such as ultrasonic pretreatment-pore-blocking flotation and pore breaking-flocculation flotation,are proposed to be the key development technologies for improving FS-RC recovery in the future.The design of low-cost,low-dose collectors containing polar bonds based on the surface and microcrystalline structures of FS-RC is proposed to be an important breakthrough point for strengthening the flotation efficiency of FS-RC in the future.The high-value utilization of FS should be based on the physicochemical structural proper-ties of FS-RC and should focus on the environmental impact of hazardous elements and the recyclability of chemical waste liquid to es-tablish an environmentally friendly utilization method.This review is of great theoretical importance for the comprehensive understand-ing of the unique structural properties of FS-RC,the breakthrough of the technological bottleneck in the efficient flotation separation of FS,and the expansion of the field of the high value-added utilization of FS-RC.展开更多
BACKGROUND In hepatology,the clinical use of endoscopic ultrasound(EUS)has experienced a notable increase in recent times.These applications range from the diagnosis to the treatment of various liver diseases.Therefor...BACKGROUND In hepatology,the clinical use of endoscopic ultrasound(EUS)has experienced a notable increase in recent times.These applications range from the diagnosis to the treatment of various liver diseases.Therefore,this systematic review summarizes the evidence for the diagnostic and therapeutic roles of EUS in liver diseases.AIM To examine and summarize the current available evidence of the possible roles of the EUS in making a suitable diagnosis in liver diseases as well as the therapeutic accuracy and efficacy.METHODS PubMed,Medline,Cochrane Library,Web of Science,and Google Scholar databases were extensively searched until October 2023.The methodological quality of the eligible articles was assessed using the Newcastle-Ottawa scale or Cochrane Risk of Bias tool.In addition,statistical analyses were performed using the Comprehensive Meta-Analysis software.RESULTS Overall,45 articles on EUS were included(28 on diagnostic role and 17 on therapeutic role).Pooled analysis demonstrated that EUS diagnostic tests had an accuracy of 92.4%for focal liver lesions(FLL)and 96.6%for parenchymal liver diseases.EUS-guided liver biopsies with either fine needle aspiration or fine needle biopsy had low complication rates when sampling FLL and parenchymal liver diseases(3.1%and 8.7%,respectively).Analysis of data from four studies showed that EUS-guided liver abscess had high clinical(90.7%)and technical success(90.7%)without significant complications.Similarly,EUS-guided interventions for the treatment of gastric varices(GV)have high technical success(98%)and GV obliteration rate(84%)with few complications(15%)and rebleeding events(17%).CONCLUSION EUS in liver diseases is a promising technique with the potential to be considered a first-line therapeutic and diagnostic option in selected cases.展开更多
Contrast-enhanced endoscopic ultrasound(CH-EUS)can overcome the limi-tations of endoscopic ultrasound-guided acquisition by identifying microvessels inside inhomogeneous tumours and improving the characterization of t...Contrast-enhanced endoscopic ultrasound(CH-EUS)can overcome the limi-tations of endoscopic ultrasound-guided acquisition by identifying microvessels inside inhomogeneous tumours and improving the characterization of these tumours.Despite the initial enthusiasm that oriented needle sampling under CH-EUS guidance could provide better diagnostic yield in pancreatic solid lesions,further studies did not confirm the supplementary values in cases of tissue acquisition guided by CH-EUS.This review details the knowledge based on the available data on contrast-guided procedures.The indications for CH-EUS tissue acquisition include isoechoic EUS lesions with poor visible delineation where CH-EUS can differentiate the lesion vascularisation from the surrounding parenchyma and also the mural nodules within biliopancreatic cystic lesions,which occur in select cases.Additionally,the roles of CH-EUS-guided therapy in patients whose pancreatic fluid collections or bile ducts that have an echogenic content have indications for drainage,and patients who have nonvisualized vessels that need to be highlighted via Doppler EUS are presented.Another indication is represented if there is a need for an immediate assessment of the post-radiofrequency ablation of pancreatic neuroendocrine tumours,in which case CH-EUS can be used to reveal the incomplete tumour destruction.展开更多
We derive the potential energy of gravity waves(GWs)in the upper troposphere and stratosphere at 45°S-45°N from December 2019 to November 2022 by using temperature profiles retrieved from the Constellation O...We derive the potential energy of gravity waves(GWs)in the upper troposphere and stratosphere at 45°S-45°N from December 2019 to November 2022 by using temperature profiles retrieved from the Constellation Observing System for Meteorology,Ionosphere,and Climate-2(COSMIC-2)satellite.Owing to the dense sampling of COSMIC-2,in addition to the strong peaks of gravity wave potential energy(GWPE)above the Andes and Tibetan Plateau,we found weak peaks above the Rocky,Atlas,Caucasus,and Tianshan Mountains.The land-sea contrast is responsible for the longitudinal variations of the GWPE in the lower and upper stratosphere.At 40°N/S,the peaks were mainly above the topographic regions during the winter.At 20°N/S,the peaks were a slight distance away from the topographic regions and might be the combined effect of nontopographic GWs and mountain waves.Near the Equator,the peaks were mainly above the regions with the lowest sea level altitude and may have resulted from convection.Our results indicate that even above the local regions with lower sea level altitudes compared with the Andes and Tibetan Plateau,the GWPE also exhibits fine structures in geographic distributions.We found that dissipation layers above the tropopause jet provide the body force to generate secondary waves in the upper stratosphere,especially during the winter months of each hemisphere and at latitudes of greater than 20°N/S.展开更多
A new insight into the interfacial transition zone(ITZ)in cement mortar specimens(CMSs)that is influenced by cement fineness is reported.The importance of cement fineness in ITZ characterizations such as morphology an...A new insight into the interfacial transition zone(ITZ)in cement mortar specimens(CMSs)that is influenced by cement fineness is reported.The importance of cement fineness in ITZ characterizations such as morphology and thickness is elucidated by backscattered electron images and by consequences to the compressive(Fc)and flexural strength(Ff),and porosity at various water/cement ratios.The findings indicate that by increasing the cement fineness the calcium silicate hydrate formation in the ITZ is favored and that this can refine the pore structures and create a denser and more homogeneous microstructure.By increasing cement fineness by about 25%of,the ITZ thickness of CMSs was reduced by about 30%and Fc was increased by 7%–52%and Ff by 19%–40%.These findings illustrate that the influence of ITZ features on the mechanical strength of CMSs is mostly related to the cement fineness and ITZ microstructure.展开更多
Plant stoichiometry and nutrient allocation may reflect adaptation strategies to environmental nutrient changes.Fire,as a major disturbance in forests,mediates soil nutrient availability that may influence plant nutri...Plant stoichiometry and nutrient allocation may reflect adaptation strategies to environmental nutrient changes.Fire,as a major disturbance in forests,mediates soil nutrient availability that may influence plant nutrient dynamics.However,plant–soil stoichiometric allocation strategies during different post-fire periods and the effects of soil,enzymes,and microbial biomass on plant stoichiom-etry are largely unknown.The pioneer tree species Betula platyphylla in burnt forests of northern China was the object of this study,and severely burned areas selected with dif-ferent fire years.Nearby unburned areas acted as a control.Carbon(C),nitrogen(N),and phosphorus(P)contents in leaves,branches,and fine roots and rhizosphere soil,C-,N-and P-acquiring enzyme activities were examined.Microbial biomass C,N,and P were measured,and factors influenc-ing C:N:P stoichiometry of plants during the burned area restoration were explored.Our results show that C and N contents in leaves increased with time since fire,while C and P in branches and C,N and P in fine roots decreased.Activities of C-,N-,and P-acquiring enzymes and microbial biomass N increased with time since fire.Redundancy analy-sis showed that changes in soil N-acquiring enzyme activity,microbial biomass C,and N had significant effects on plant ecological stoichiometry.These results show a significant flexibility in plant nutrient element allocation strategies and C:N:P stoichiometric characteristics.Soil extracellular enzyme activity drives the changes in stoichiometry during the process of post-fire restoration.展开更多
Fine slag(FS)is an unavoidable by-product of coal gasification.FS,which is a simple heap of solid waste left in the open air,easily causes environmental pollution and has a low resource utilization rate,thereby restri...Fine slag(FS)is an unavoidable by-product of coal gasification.FS,which is a simple heap of solid waste left in the open air,easily causes environmental pollution and has a low resource utilization rate,thereby restricting the development of energy-saving coal gasification technologies.The multiscale analysis of FS performed in this study indicates typical grain size distribution,composition,crystalline structure,and chemical bonding characteristics.The FS primarily contained inorganic and carbon components(dry bases)and exhibited a"three-peak distribution"of the grain size and regular spheroidal as well as irregular shapes.The irregular particles were mainly adsorbed onto the structure and had a dense distribution and multiple pores and folds.The carbon constituents were primarily amorphous in structure,with a certain degree of order and active sites.C 1s XPS spectrum indicated the presence of C–C and C–H bonds and numerous aromatic structures.The inorganic components,constituting 90%of the total sample,were primarily silicon,aluminum,iron,and calcium.The inorganic components contained Si–O-Si,Si–O–Al,Si–O,SO_(4)^(2−),and Fe–O bonds.Fe 2p XPS spectrum could be deconvoluted into Fe 2p_(1/2) and Fe 2p_(3/2) peaks and satellite peaks,while Fe existed mainly in the form of Fe(III).The findings of this study will be beneficial in resource utilization and formation mechanism of fine slag in future.展开更多
We developed ultra-high performance concrete(UHPC)incorporating mullite sand and brown corundum sand(BCS),and the quartz sand UHPC was utilized to prepare for comparison.The properties of compressive strength,elastic ...We developed ultra-high performance concrete(UHPC)incorporating mullite sand and brown corundum sand(BCS),and the quartz sand UHPC was utilized to prepare for comparison.The properties of compressive strength,elastic modulus,ultrasonic pulse velocity,flexural strength,and toughness were investigated.Scanning electron microscopy and nanoindentation were also conducted to reveal the underlying mechanisms affecting macroscopic performance.Due to the superior interface bonding properties between mullite sand and matrix,the compressive strength and flexural toughness of UHPC have been significantly improved.Mullite sand and BCS aggregates have higher stiffness than quartz sand,contributing to the excellent elastic modulus exhibited by UHPC.The stiffness and volume of aggregates have a more significant impact on the elastic modulus of UHPC than interface performance,and the latter contributes more to the strength of UHPC.This study will provide a reference for developing UHPC with superior elastic modulus for structural engineering.展开更多
Understanding the drivers of variations in fine root lifespan is key to informing nutrient cycling and productivity in terrestrial ecosystems.However,the general patterns and determinants of forest fine root lifespan ...Understanding the drivers of variations in fine root lifespan is key to informing nutrient cycling and productivity in terrestrial ecosystems.However,the general patterns and determinants of forest fine root lifespan at the global scale are still limited.We compiled a dataset of 421 fine root lifespan observations from 76 tree species globally to assess phylogenetic signals among species,explored relationships between fine root lifespan and biotic and abiotic factors,and quantified the relative importance of phylogeny,root system structure and functions,climatic and edaphic factors in driving global fine root lifespan variations.Overall,fine root lifespan showed a clear phylogenetic signal,with gymnosperms having a longer fine root lifespan than angiosperms.Fine root lifespan was longer for evergreens than deciduous trees.Ectomycorrhizal(ECM)plants had an extended fine root lifespan than arbuscular mycorrhizal(AM)plants.Among different climatic zones,fine root lifespan was the longest in the boreal zone,while it did not vary between the temperate and tropical zone.Fine root lifespan increased with soil depth and root order.Furthermore,the analysis of relative importance indicated that phylogeny was the strongest driver influencing the variation in forest fine root lifespan,followed by soil clay content,root order,mean annual temperature,and soil depth,while other environmental factors and root traits exerted weaker effects.Our results suggest that the global pattern of fine root lifespan in forests is shaped by the interplay of phylogeny,root traits and environmental factors.These findings necessitate accurate representations of tree evolutionary history in earth system models to predict fine root longevity and its responses to global changes.展开更多
Flag leaf angle is one of the key target traits in high yield wheat breeding.A smaller flag leaf angle reduces shading and enables plants to grow at a higher density,which increases yield.Here we identified a mutant,j...Flag leaf angle is one of the key target traits in high yield wheat breeding.A smaller flag leaf angle reduces shading and enables plants to grow at a higher density,which increases yield.Here we identified a mutant,je0407,with an 84.34%-89.35%smaller flag leaf angle compared with the wild type.The mutant also had an abnormal lamina joint and no ligule or auricle.Genetic analysis indicated that the ligule was controlled by two recessive genes,which were mapped to chromosomes 2AS and 2DL.The mutant allele on chromosome 2AS was named Tafla1b,and it was fine mapped to a 1 Mb physical interval.The mutant allele on chr.2DL was identified as Taspl8b,a novel allele of TaSPL8 with a missense mutation in the second exon,which was used to develop a cleaved amplified polymorphic sequence marker.F3 and F4 lines derived from crosses between Jing411 and je0407 were genotyped to investigate interactions between the Tafla1b and Taspl8b alleles.Plants with the Tafla1b/Taspl8a genotype had 58.41%-82.76%smaller flag leaf angles,6.4%-24.9%shorter spikes,and a greater spikelet density(0.382 more spikelets per cm)compared with the wild type.Plants with the Tafla1a/Taspl8b genotype had 52.62%-82.24%smaller flag leaf angles and no differences in plant height or spikelet density compared with the wild type.Tafla1b/Taspl8b plants produced erect leaves with an abnormal lamina joint.The two alleles had dosage effects on ligule formation and flag leaf angle,but no significant effect on thousand-grain weight.The mutant alleles provide novel resources for improvement of wheat plant architecture.展开更多
In a wheat breeding line XQ-0508 showing consistent resistance to powdery mildew disease,a recessive gene,designated PmXQ-0508,was identified and mapped to a distal region on chromosome arm 2BS.Of three resistance-ass...In a wheat breeding line XQ-0508 showing consistent resistance to powdery mildew disease,a recessive gene,designated PmXQ-0508,was identified and mapped to a distal region on chromosome arm 2BS.Of three resistance-associated genes in this region,one encoding a protein kinase was selected as the primary candidate for PmXQ-0508.Ten closely linked DNA markers developed in the study could be used for marker-assisted selection for powdery-mildew resistance in breeding programs.展开更多
基金Funding by Hong Kong Grant Council(HKUST6226/01E)andtheKey Project of Chinese Ministry of Education(No.105125)
文摘The influence of calcium sulfate state and fineness of cement on hydration of Portland cement was studied using electrical resistivity measurement. The bulk resistivity curve of the paste from the abnormal cement mainly with hemihydrate had a characteristic abnormal peak and rapid increase in early period. The resistivity measurement technique can be used to discriminate abnormal setting. For normal cement with gypsum, the increase in fineness of the Portland cement decreases the minimum resistivhy due to a higher ionic concentration and increases the 24 hour resistivity due to a reduction in macroscopic pore size. The setting time, compressive strength, pore structure of pastes made from different cements were carried out to compare the influence of water to cement ratio, calcium sulfate state and fineness. It is found that the electrical and mechanical properties are strongly affected by the initial porosity, the presence of hemihydrate or gypsum, and the fineness of cement.
基金This work is supported by the Major State Basic Research Development Program of China(2004CB117300)the National Natural Science Foundation of China (30530490)
文摘Cotton,the most important natural fiber crop in the world,is a mainstay in China's economy.However,for over two decades,cotton yields both in China and U.S.have been at a plateau.
文摘In recent years, the usages of by-products and wastes in industry have become more important. The importance of the sustainable development is also of increasing. The utilizations of wastes, as mineral admixture or fine aggregate, reduce the consumption of the natural resources and improve the durability of concrete. In this study, the effect of the fineness on the high temperature and sulphate resistances of concrete mortar specimens, produced with ground granulated blast-furnace slag (GBFS) replacing cement, is investigated. The compressive and flexural strength test results for all series related to durability effects, exposing temperature and solutions, exposure times for these durability effects, slag content and fineness are discussed. Conse- quently, the optimum slag contents are determined for producing the sulphate and high temperature resistant mortars.
基金This work is financially supported by the Key Scientific and Technological Project of Hubei Province (No. 971P0216).
文摘The effect of trace Ti and Y on Au-based alloys with 990 fineness has beeninvestigated systematically by means of tensile test, hardness test, scanning and transmissionelectron microscopic analyses. These experimental results show that trace Ti and Y can significantlyimprove the mechanical properties of Au-based alloys with 990 fineness because Ti and Y cansignificantly refine matrix grains, and solid solution strengthening, work strengthening andprecipitation strengthening occur during mechanical heat treatment.
基金Funded by National Natural Science Foundation of China (Nos.51808272, 51768033)Gansu Youth Science and Technology Fund (No.21JR7RA330)+2 种基金Tianyou Youth Talent Lift Program of Lanzhou Jiaotong University,Gansu Province Youth Talent Support Project (No. GXH20210611-10)Key R&D Capability Enhancement Project of Gansu Provincial Finance Department (No. 2019zx-09)the Program for Changjiang Scholars and Innovative Research Team in University of Ministry of Education of China (No. IRT_15R29)。
文摘The effect of the content and specific surface area of the ground granulated blast furnace slag (GGBS) on the pore structure of the cement paste was determined through the low-field nuclear magnetic resonance (NMR).The Pearson correlation analysis method was used to calculate the correlation coefficient between the porosity and age of cement paste,the specific surface area of GGBS and the content of GGBS.The test results exhibited that the porosity of the cement paste with different ageing durations gradually decreased on increasing the content and specific surface area of GGBS.The content and specific surface area of GGBS had a negligible effect on the 1-10 nm size gel pores in the cement paste,whereas,had a significant effect on the 10-100 nm size capillary pores.In addition,these parameters did not affect the final most probable pore size of the cement paste.The correlation between age and porosity was the largest,and the correlation between GGBS content and porosity was greater than that between GGBS specific surface area and porosity.Moreover,a modified pore structure model was successfully developed to effectively predict the pore structure of the GGBS based cement paste.
文摘The paper deals with the theoretic relationship betweenfineness of man-made fibers blended with natural fibersand regularities of the yarns made from them.Throughestablishment of the theory model and digitally analysisusing Matlab software,the optimum fineness of the fi-bers could be figured out.
基金This research was supported by a grant from the National Research Foundation of Korea provided by the government of Republic of Korea(2019R1A2C1085686).
文摘Soyang Lake is the largest lake in Republic of Korea bordering Chuncheon,Yanggu,and Inje in Gangwon Province.It is widely used as an environmental resource for hydropower,flood control,and water supply.Therefore,we conducted a survey of the floodplain of Soyang Lake to analyze the sediments in the area.We used global positioning system(GPS)data and aerial photography to monitor sediment deposits in the Soyang Lake floodplain.Data from three GPS units were compared to determine the accuracy of sampling location measurement.Sediment samples were collected at three sites:two in the eastern region of the floodplain and one in the western region.A total of eight samples were collected:Three samples were collected at 10 cm intervals to a depth of 30 cm from each site of the eastern sampling point,and two samples were collected at depths of 10 and 30 cm at the western sampling point.Samples were collected and analyzed for vertical and horizontal trends in particle size and moisture content.The sizes of the sediment samples ranged from coarse to very coarse sediments with a negative slope,which indicate eastward movement from the breach.The probability of a breach was indicated by the high water content at the eastern side of the floodplain,with the eastern sites showing a higher probability than the western sites.The results of this study indicate that analyses of grain fineness,moisture content,sediment deposits,and sediment removal rates can be used to understand and predict the direction of breach movement and sediment distribution in Soyang Lake.
文摘In order to precisely measure the diameters for obtaining the fineness of rolling raw silk, the physical features of raw silk are analyzed. By means of Fresnel principle, diffractions caused by different transparent raw silk filaments are analyzed and simulated. Image data of raw silk filament measured by digital CMOS camera are analyzed and processed for obtaining the precise diameters of the filamerit with the relative error of less than 1%. On the assumption of appropriate elliptic cross-section of the filament, the cross-section area is calculated as the fineness of the filament. Measurement experiments are carded out. Finally, some suggestions are proposed for photoelectric measuring the fineness of raw silk.
文摘The effect of a machine feeding rate(FR;1,1.5 and 2 Mg/h)and/or three levels of selected fineness degree(FD;3,5 and 7 mm)on machine performance,pellet physical parameters,required energy and production cost of three main types of broilers diets were examined in this experiment.The examined broiler diets were formulated to meet the Ross 308 strain requirements.A complete factorial design(3×3×3)was used to identify the effects of studied factors on the pellet mill machine and pellet production.The obtained results indicated that the pellet mill productivity significantly(p˂0.001)improved through increased pellet mill feeding rate level.In addition,the machine pelleting efficiency was found to be significantly affected by all studied variables and their interactions.While the total power consumption of the machine showed no variations under the impact of the tested factors or with any of their combinations.Regarding the pellet physical quality indices,all broiler diets with all selected FD and lower FR had the maximum durability and bulk density levels.Furthermore,lower feeding rates were associated with higher hardness degrees.The lowest production costs were substantially correlated with high FR and intermediate FD(5 mm).Furthermore,production costs were determined to be reduced in finisher broiler diets under different feeding rates.Moreover,manufacturing costs of finisher broiler meals were observed to decrease in several feeding rates.Overall,these findings indicate the capabilities of producing high-quality pellets and reducing the needed production costs by optimizing feeding rates to 2 Mg/h and 2 mm fineness in broiler diets.
基金the National Natural Science Foundation of China(No.52374279)the Natural Science Foundation of Shaanxi Province(No.2023-YBGY-055).
文摘Coal gasification fine slag(FS)is a typical solid waste generated in coal gasification.Its current disposal methods of stockpil-ing and landfilling have caused serious soil and ecological hazards.Separation recovery and the high-value utilization of residual carbon(RC)in FS are the keys to realizing the win-win situation of the coal chemical industry in terms of economic and environmental benefits.The structural properties,such as pore,surface functional group,and microcrystalline structures,of RC in FS(FS-RC)not only affect the flotation recovery efficiency of FS-RC but also form the basis for the high-value utilization of FS-RC.In this paper,the characteristics of FS-RC in terms of pore structure,surface functional groups,and microcrystalline structure are sorted out in accordance with gasification type and FS particle size.The reasons for the formation of the special structural properties of FS-RC are analyzed,and their influence on the flotation separation and high-value utilization of FS-RC is summarized.Separation methods based on the pore structural characterist-ics of FS-RC,such as ultrasonic pretreatment-pore-blocking flotation and pore breaking-flocculation flotation,are proposed to be the key development technologies for improving FS-RC recovery in the future.The design of low-cost,low-dose collectors containing polar bonds based on the surface and microcrystalline structures of FS-RC is proposed to be an important breakthrough point for strengthening the flotation efficiency of FS-RC in the future.The high-value utilization of FS should be based on the physicochemical structural proper-ties of FS-RC and should focus on the environmental impact of hazardous elements and the recyclability of chemical waste liquid to es-tablish an environmentally friendly utilization method.This review is of great theoretical importance for the comprehensive understand-ing of the unique structural properties of FS-RC,the breakthrough of the technological bottleneck in the efficient flotation separation of FS,and the expansion of the field of the high value-added utilization of FS-RC.
文摘BACKGROUND In hepatology,the clinical use of endoscopic ultrasound(EUS)has experienced a notable increase in recent times.These applications range from the diagnosis to the treatment of various liver diseases.Therefore,this systematic review summarizes the evidence for the diagnostic and therapeutic roles of EUS in liver diseases.AIM To examine and summarize the current available evidence of the possible roles of the EUS in making a suitable diagnosis in liver diseases as well as the therapeutic accuracy and efficacy.METHODS PubMed,Medline,Cochrane Library,Web of Science,and Google Scholar databases were extensively searched until October 2023.The methodological quality of the eligible articles was assessed using the Newcastle-Ottawa scale or Cochrane Risk of Bias tool.In addition,statistical analyses were performed using the Comprehensive Meta-Analysis software.RESULTS Overall,45 articles on EUS were included(28 on diagnostic role and 17 on therapeutic role).Pooled analysis demonstrated that EUS diagnostic tests had an accuracy of 92.4%for focal liver lesions(FLL)and 96.6%for parenchymal liver diseases.EUS-guided liver biopsies with either fine needle aspiration or fine needle biopsy had low complication rates when sampling FLL and parenchymal liver diseases(3.1%and 8.7%,respectively).Analysis of data from four studies showed that EUS-guided liver abscess had high clinical(90.7%)and technical success(90.7%)without significant complications.Similarly,EUS-guided interventions for the treatment of gastric varices(GV)have high technical success(98%)and GV obliteration rate(84%)with few complications(15%)and rebleeding events(17%).CONCLUSION EUS in liver diseases is a promising technique with the potential to be considered a first-line therapeutic and diagnostic option in selected cases.
文摘Contrast-enhanced endoscopic ultrasound(CH-EUS)can overcome the limi-tations of endoscopic ultrasound-guided acquisition by identifying microvessels inside inhomogeneous tumours and improving the characterization of these tumours.Despite the initial enthusiasm that oriented needle sampling under CH-EUS guidance could provide better diagnostic yield in pancreatic solid lesions,further studies did not confirm the supplementary values in cases of tissue acquisition guided by CH-EUS.This review details the knowledge based on the available data on contrast-guided procedures.The indications for CH-EUS tissue acquisition include isoechoic EUS lesions with poor visible delineation where CH-EUS can differentiate the lesion vascularisation from the surrounding parenchyma and also the mural nodules within biliopancreatic cystic lesions,which occur in select cases.Additionally,the roles of CH-EUS-guided therapy in patients whose pancreatic fluid collections or bile ducts that have an echogenic content have indications for drainage,and patients who have nonvisualized vessels that need to be highlighted via Doppler EUS are presented.Another indication is represented if there is a need for an immediate assessment of the post-radiofrequency ablation of pancreatic neuroendocrine tumours,in which case CH-EUS can be used to reveal the incomplete tumour destruction.
基金the National Natural Science Foundation of China(Grant Nos.41831073,42174196,and 42374205)the Project of Stable Support for Youth Team in Basic Research Field,Chinese Academy of Sciences(CAS+4 种基金Grant No.YSBR-018)the Informatization Plan of CAS(Grant No.CAS-WX2021PY-0101)the Youth Cross Team Scientific Research project of the Chinese Academy of Sciences(Grant No.JCTD-2021-10)the Open Research Project of Large Research Infrastructures of CAS titled“Study on the Interaction Between Low-/Mid-Latitude Atmosphere and Ionosphere Based on the Chinese Meridian Project.”This work was also supported in part by the Specialized Research Fund and the Open Research Program of the State Key Laboratory of Space Weather.
文摘We derive the potential energy of gravity waves(GWs)in the upper troposphere and stratosphere at 45°S-45°N from December 2019 to November 2022 by using temperature profiles retrieved from the Constellation Observing System for Meteorology,Ionosphere,and Climate-2(COSMIC-2)satellite.Owing to the dense sampling of COSMIC-2,in addition to the strong peaks of gravity wave potential energy(GWPE)above the Andes and Tibetan Plateau,we found weak peaks above the Rocky,Atlas,Caucasus,and Tianshan Mountains.The land-sea contrast is responsible for the longitudinal variations of the GWPE in the lower and upper stratosphere.At 40°N/S,the peaks were mainly above the topographic regions during the winter.At 20°N/S,the peaks were a slight distance away from the topographic regions and might be the combined effect of nontopographic GWs and mountain waves.Near the Equator,the peaks were mainly above the regions with the lowest sea level altitude and may have resulted from convection.Our results indicate that even above the local regions with lower sea level altitudes compared with the Andes and Tibetan Plateau,the GWPE also exhibits fine structures in geographic distributions.We found that dissipation layers above the tropopause jet provide the body force to generate secondary waves in the upper stratosphere,especially during the winter months of each hemisphere and at latitudes of greater than 20°N/S.
文摘A new insight into the interfacial transition zone(ITZ)in cement mortar specimens(CMSs)that is influenced by cement fineness is reported.The importance of cement fineness in ITZ characterizations such as morphology and thickness is elucidated by backscattered electron images and by consequences to the compressive(Fc)and flexural strength(Ff),and porosity at various water/cement ratios.The findings indicate that by increasing the cement fineness the calcium silicate hydrate formation in the ITZ is favored and that this can refine the pore structures and create a denser and more homogeneous microstructure.By increasing cement fineness by about 25%of,the ITZ thickness of CMSs was reduced by about 30%and Fc was increased by 7%–52%and Ff by 19%–40%.These findings illustrate that the influence of ITZ features on the mechanical strength of CMSs is mostly related to the cement fineness and ITZ microstructure.
基金supported by National Natural Science Foundation of China(No.32071777)the Fundamental Research Funds for the Central Universities(2572021BA04).
文摘Plant stoichiometry and nutrient allocation may reflect adaptation strategies to environmental nutrient changes.Fire,as a major disturbance in forests,mediates soil nutrient availability that may influence plant nutrient dynamics.However,plant–soil stoichiometric allocation strategies during different post-fire periods and the effects of soil,enzymes,and microbial biomass on plant stoichiom-etry are largely unknown.The pioneer tree species Betula platyphylla in burnt forests of northern China was the object of this study,and severely burned areas selected with dif-ferent fire years.Nearby unburned areas acted as a control.Carbon(C),nitrogen(N),and phosphorus(P)contents in leaves,branches,and fine roots and rhizosphere soil,C-,N-and P-acquiring enzyme activities were examined.Microbial biomass C,N,and P were measured,and factors influenc-ing C:N:P stoichiometry of plants during the burned area restoration were explored.Our results show that C and N contents in leaves increased with time since fire,while C and P in branches and C,N and P in fine roots decreased.Activities of C-,N-,and P-acquiring enzymes and microbial biomass N increased with time since fire.Redundancy analy-sis showed that changes in soil N-acquiring enzyme activity,microbial biomass C,and N had significant effects on plant ecological stoichiometry.These results show a significant flexibility in plant nutrient element allocation strategies and C:N:P stoichiometric characteristics.Soil extracellular enzyme activity drives the changes in stoichiometry during the process of post-fire restoration.
基金Scientific Research Foundation for the Introduction of Talent in Anhui University of Science and Technology(2023yjrc90)Graduate Research Project of Higher Education in Anhui Province(YJS20210377)+2 种基金Postgraduate Innovation Fund of Anhui University of Science and Technology(2021CX1002)University Synergy Innovation Program of Anhui Province(GXXT-2020-006)National Science Fund for Young Scientists(52200139).
文摘Fine slag(FS)is an unavoidable by-product of coal gasification.FS,which is a simple heap of solid waste left in the open air,easily causes environmental pollution and has a low resource utilization rate,thereby restricting the development of energy-saving coal gasification technologies.The multiscale analysis of FS performed in this study indicates typical grain size distribution,composition,crystalline structure,and chemical bonding characteristics.The FS primarily contained inorganic and carbon components(dry bases)and exhibited a"three-peak distribution"of the grain size and regular spheroidal as well as irregular shapes.The irregular particles were mainly adsorbed onto the structure and had a dense distribution and multiple pores and folds.The carbon constituents were primarily amorphous in structure,with a certain degree of order and active sites.C 1s XPS spectrum indicated the presence of C–C and C–H bonds and numerous aromatic structures.The inorganic components,constituting 90%of the total sample,were primarily silicon,aluminum,iron,and calcium.The inorganic components contained Si–O-Si,Si–O–Al,Si–O,SO_(4)^(2−),and Fe–O bonds.Fe 2p XPS spectrum could be deconvoluted into Fe 2p_(1/2) and Fe 2p_(3/2) peaks and satellite peaks,while Fe existed mainly in the form of Fe(III).The findings of this study will be beneficial in resource utilization and formation mechanism of fine slag in future.
基金Funed by the National Natural Science Foundation of China(No.U21A20149)the Ecological Environment Scientific Research Project of Anhui Province(No.2023hb0014)+2 种基金the Research Reserve of Anhui Jianzhu University(No.2022XMK01)the Excellent Scientific Research and Innovation Team in Colleges and Universities of Anhui Province(No.2022AH010017)Research on the preparation technology of self compacting concrete with strength grade C100.
文摘We developed ultra-high performance concrete(UHPC)incorporating mullite sand and brown corundum sand(BCS),and the quartz sand UHPC was utilized to prepare for comparison.The properties of compressive strength,elastic modulus,ultrasonic pulse velocity,flexural strength,and toughness were investigated.Scanning electron microscopy and nanoindentation were also conducted to reveal the underlying mechanisms affecting macroscopic performance.Due to the superior interface bonding properties between mullite sand and matrix,the compressive strength and flexural toughness of UHPC have been significantly improved.Mullite sand and BCS aggregates have higher stiffness than quartz sand,contributing to the excellent elastic modulus exhibited by UHPC.The stiffness and volume of aggregates have a more significant impact on the elastic modulus of UHPC than interface performance,and the latter contributes more to the strength of UHPC.This study will provide a reference for developing UHPC with superior elastic modulus for structural engineering.
基金provided by the National Key R&D Program of China(2023YFD2200904)the Scientific Research Project of Anhui Province(2022AH050873)+1 种基金the State Key Laboratory of Subtropical Silviculture(SKLSS-KF2023-08)the Anhui Provincial Science and Technology Special Project(202204c06020014)。
文摘Understanding the drivers of variations in fine root lifespan is key to informing nutrient cycling and productivity in terrestrial ecosystems.However,the general patterns and determinants of forest fine root lifespan at the global scale are still limited.We compiled a dataset of 421 fine root lifespan observations from 76 tree species globally to assess phylogenetic signals among species,explored relationships between fine root lifespan and biotic and abiotic factors,and quantified the relative importance of phylogeny,root system structure and functions,climatic and edaphic factors in driving global fine root lifespan variations.Overall,fine root lifespan showed a clear phylogenetic signal,with gymnosperms having a longer fine root lifespan than angiosperms.Fine root lifespan was longer for evergreens than deciduous trees.Ectomycorrhizal(ECM)plants had an extended fine root lifespan than arbuscular mycorrhizal(AM)plants.Among different climatic zones,fine root lifespan was the longest in the boreal zone,while it did not vary between the temperate and tropical zone.Fine root lifespan increased with soil depth and root order.Furthermore,the analysis of relative importance indicated that phylogeny was the strongest driver influencing the variation in forest fine root lifespan,followed by soil clay content,root order,mean annual temperature,and soil depth,while other environmental factors and root traits exerted weaker effects.Our results suggest that the global pattern of fine root lifespan in forests is shaped by the interplay of phylogeny,root traits and environmental factors.These findings necessitate accurate representations of tree evolutionary history in earth system models to predict fine root longevity and its responses to global changes.
基金supported by the National Key Research and Development Project of China(2022YFD1200700)the Crop Varietal Improvement and Insect Pests Control by Nuclear Radiation,Innovation Program of Chinese Academy of Agricultural Sciences,and the China Agriculture Research System(CARS-03).
文摘Flag leaf angle is one of the key target traits in high yield wheat breeding.A smaller flag leaf angle reduces shading and enables plants to grow at a higher density,which increases yield.Here we identified a mutant,je0407,with an 84.34%-89.35%smaller flag leaf angle compared with the wild type.The mutant also had an abnormal lamina joint and no ligule or auricle.Genetic analysis indicated that the ligule was controlled by two recessive genes,which were mapped to chromosomes 2AS and 2DL.The mutant allele on chromosome 2AS was named Tafla1b,and it was fine mapped to a 1 Mb physical interval.The mutant allele on chr.2DL was identified as Taspl8b,a novel allele of TaSPL8 with a missense mutation in the second exon,which was used to develop a cleaved amplified polymorphic sequence marker.F3 and F4 lines derived from crosses between Jing411 and je0407 were genotyped to investigate interactions between the Tafla1b and Taspl8b alleles.Plants with the Tafla1b/Taspl8a genotype had 58.41%-82.76%smaller flag leaf angles,6.4%-24.9%shorter spikes,and a greater spikelet density(0.382 more spikelets per cm)compared with the wild type.Plants with the Tafla1a/Taspl8b genotype had 52.62%-82.24%smaller flag leaf angles and no differences in plant height or spikelet density compared with the wild type.Tafla1b/Taspl8b plants produced erect leaves with an abnormal lamina joint.The two alleles had dosage effects on ligule formation and flag leaf angle,but no significant effect on thousand-grain weight.The mutant alleles provide novel resources for improvement of wheat plant architecture.
基金supported by the National Natural Science Foundation of China(32072053,32301800,and 32301923)Wheat Industry Technology System of Shandong Province(SDAIT-01-01)the Key R&D Plan of Shandong Province(2022LZG002-4).
文摘In a wheat breeding line XQ-0508 showing consistent resistance to powdery mildew disease,a recessive gene,designated PmXQ-0508,was identified and mapped to a distal region on chromosome arm 2BS.Of three resistance-associated genes in this region,one encoding a protein kinase was selected as the primary candidate for PmXQ-0508.Ten closely linked DNA markers developed in the study could be used for marker-assisted selection for powdery-mildew resistance in breeding programs.
