Interface debonding between prostheses and abutments was the most frequent failure mode of resin-bonded fixed partials dentures(RBFPDs) in clinic. The purpose of this study was to investigate the effect of accessory r...Interface debonding between prostheses and abutments was the most frequent failure mode of resin-bonded fixed partials dentures(RBFPDs) in clinic. The purpose of this study was to investigate the effect of accessory retention forms on the bond strength of RBFPDs. Three types of 3D finite element models were constructed.The model of posterior metal plate RBFPD with spoon-shaped occlusal rest seats served as the control. The remaining two types of models based on the control added the retention form design of the pin hole and axial groove respectively. The axial or buccolingual load of 150 N was applied on the prosthesis, first premolar and first molar respectively. The maximum principal stresses of the adhesive layer in different models were calculated. Under the load of the same magnitude, the stress due to the buccolingual load was significantly higher than that due to the axial load in the adhesive layer. The proximal shoulder, occlusal rest seats wall and the proximal margin adjacent to the shoulder were the high risk region where the adhesive layer damaged easily. Compared with the control model, the pin and groove models could slightly decrease the stress in the adhesive layer after the axial loading, while the stress in the adhesive layer drastically decreased after horizontal loading and reduced by 22% and 31% respectively. These results indicate that the horizontal occlusal force has a more serious harm to the debonding of RBFPDs. In addition, the accessory retention forms(e.g. pin and axial groove retention forms) can decrease the stress level in the adhesive layer, which are conducive to increase the load-bearing capacity of RBFPDs.展开更多
Background Dental implant technology has developed rapidly in recent years. However, the use of implant-supported fixed bridges with cantilevers has been controversial. The purpose of this study was to evaluate the cl...Background Dental implant technology has developed rapidly in recent years. However, the use of implant-supported fixed bridges with cantilevers has been controversial. The purpose of this study was to evaluate the clinical results of the mandibular anterior implant-supported fixed bridges with a cantilever. Method Thirty-three patients （15 males, 18 females; mean age, 42.6 years; range 20-54 years） with two missing anterior mandibular teeth had single implant-supported fixed bridges with a cantilever. Clinical examination was recorded and radiographs were taken. The mean duration of follow-up was 30 months （15-44 months）. Results All implants survived. Loosening or fracture of the prosthesis was not observed. All patients were satisfied with the treatment. The mean bone resorption values after 12, 24, and 36 months of implant loading were 0.94, 1.18 and 1.35 mm respectively. The changes of gingival papilla height ranged from 0 to 0.5 mm. There was significant difference between 1-year and 2 or 3 years restoration groups regarding the average gingival height changes （P 〈0.05）. Conclusion After careful and precise selection of patients, restoration with a single implant-supported fixed bridge with a cantilever can be recommended if two anterior mandibular teeth are missing.展开更多
基金National Natural Science Foundation of Chinagrant number:10902010,11120101001,and 10925208
文摘Interface debonding between prostheses and abutments was the most frequent failure mode of resin-bonded fixed partials dentures(RBFPDs) in clinic. The purpose of this study was to investigate the effect of accessory retention forms on the bond strength of RBFPDs. Three types of 3D finite element models were constructed.The model of posterior metal plate RBFPD with spoon-shaped occlusal rest seats served as the control. The remaining two types of models based on the control added the retention form design of the pin hole and axial groove respectively. The axial or buccolingual load of 150 N was applied on the prosthesis, first premolar and first molar respectively. The maximum principal stresses of the adhesive layer in different models were calculated. Under the load of the same magnitude, the stress due to the buccolingual load was significantly higher than that due to the axial load in the adhesive layer. The proximal shoulder, occlusal rest seats wall and the proximal margin adjacent to the shoulder were the high risk region where the adhesive layer damaged easily. Compared with the control model, the pin and groove models could slightly decrease the stress in the adhesive layer after the axial loading, while the stress in the adhesive layer drastically decreased after horizontal loading and reduced by 22% and 31% respectively. These results indicate that the horizontal occlusal force has a more serious harm to the debonding of RBFPDs. In addition, the accessory retention forms(e.g. pin and axial groove retention forms) can decrease the stress level in the adhesive layer, which are conducive to increase the load-bearing capacity of RBFPDs.
基金This study was supported by a grant from the National Natural Science Foundation of China （No. 81100781）.
文摘Background Dental implant technology has developed rapidly in recent years. However, the use of implant-supported fixed bridges with cantilevers has been controversial. The purpose of this study was to evaluate the clinical results of the mandibular anterior implant-supported fixed bridges with a cantilever. Method Thirty-three patients （15 males, 18 females; mean age, 42.6 years; range 20-54 years） with two missing anterior mandibular teeth had single implant-supported fixed bridges with a cantilever. Clinical examination was recorded and radiographs were taken. The mean duration of follow-up was 30 months （15-44 months）. Results All implants survived. Loosening or fracture of the prosthesis was not observed. All patients were satisfied with the treatment. The mean bone resorption values after 12, 24, and 36 months of implant loading were 0.94, 1.18 and 1.35 mm respectively. The changes of gingival papilla height ranged from 0 to 0.5 mm. There was significant difference between 1-year and 2 or 3 years restoration groups regarding the average gingival height changes （P 〈0.05）. Conclusion After careful and precise selection of patients, restoration with a single implant-supported fixed bridge with a cantilever can be recommended if two anterior mandibular teeth are missing.
