An innovative flat heat pipe radiator was put forward, and it has the features of high efficiency of heat dissipation, compact construction, low thermal resistance, light weight, low cost, and anti-dust-deposition. Th...An innovative flat heat pipe radiator was put forward, and it has the features of high efficiency of heat dissipation, compact construction, low thermal resistance, light weight, low cost, and anti-dust-deposition. The thermal analysis of the flat heat pipe radiator for cooling high-power light emitting diode （LED） array was conducted. The thermal characteristics of the flat heat pipe radiator under the different heat loads and incline angles were investigated experimentally in natural convection. An electro-thermal conversion method was used to measure the junction temperature of the LED chips. It is found that the integral temperature distribution of the flat heat pipe radiator is reasonable and uniform. The total thermal resistance of the flat heat pipe radiator varies in the range of 0.38-0.45 K/W. The junction temperatures of LED chips with the flat heat pipe radiator and with the aluminum board at the same forward current of 0.35 A are 52.5 and 75.2 ℃, respectively.展开更多
To unravel the intricacies of two-phase gas-liquid flow characteristics and heat transfer behavior,an array mini-channel gravity plate heat pipe(AMGPHP)is proposed in this work,which allows for observing the internal ...To unravel the intricacies of two-phase gas-liquid flow characteristics and heat transfer behavior,an array mini-channel gravity plate heat pipe(AMGPHP)is proposed in this work,which allows for observing the internal changes in the state of the working fluids.The flow patterns such as pool flow,columnar flow,and slug flow,are experimentally explored and analyzed in detail.It is found that the optimal volume fill ratio is 20%by utilizing start-up time and thermal resistance as performance evaluation metrics.With this fill ratio,a medium optimization strategy by blending ethanol within R141b is proposed and evaluated.In comparison to pure working fluids,the heat transfer performance of AMGFHP in the binary fluid has been significantly augmented due to temperature and concentration shifts resulting from disparate boiling points.Under the 10%volume fraction ethanol blending condition,the equivalent thermal conductivity of the heat pipe is dramatically elevated,with a value of 3110 W/(m·℃),along with the reduction of the minimum start-up power to 4 W.In general,applying such a medium to heat pipes has considerable potential in practical applications.展开更多
The heat transfer performance of ultra-thin flat heat pipes with#180 copper mesh wick was studied by numerical simulation for different heating powers.The length,width and height of the ultra-thin flat heat pipe are 8...The heat transfer performance of ultra-thin flat heat pipes with#180 copper mesh wick was studied by numerical simulation for different heating powers.The length,width and height of the ultra-thin flat heat pipe are 80 mm,8.5 mm and 1 mm,respectively.The temperature distribution and flow characteristics of ultra-thin flat heat pipes were simulated by coupling porous media model and user-defined function(UDF)in FLUENT.To validate the accuracy of the numerical model,the simulation results of the ultra-thin flat heat pipe are compared with the experimental data in predicting the evaporation section temperature.The numerical model has good accuracy for the one-dimensional heat transfer method of ultra-thin flat heat pipes.The velocity,pressure drop of the wick and total temperature difference have the same variation trend.With the increase of heating power,the temperature difference of ultra-thin flat heat pipes increases,and the pressure drop and the liquid velocity in the wick also increase.展开更多
This paper presents an experimental study including visualization on a flat plate closed loop pulsating heat pipes.It consists of a total of 40 channels with square cross section(2 mm×2 mm,165 mm long) machined d...This paper presents an experimental study including visualization on a flat plate closed loop pulsating heat pipes.It consists of a total of 40 channels with square cross section(2 mm×2 mm,165 mm long) machined directly on an aluminum plate(180 mm×120 mm×3 mm) covered by a transparent plate.The working fluid employed is ethanol.As a result,various flow patterns and their transitions are observed and found to be related to the fluid fill ratio,input heat load and the device orientation.Also the operational characteristics and working mechanism are discussed.展开更多
This paper presents an experimental study on a flat plate closed loop pulsating heat pipes. It consisted of total 40 channels with square cross section （2 × 2 mm^2, 165 mm long） machined directly on an aluminum...This paper presents an experimental study on a flat plate closed loop pulsating heat pipes. It consisted of total 40 channels with square cross section （2 × 2 mm^2, 165 mm long） machined directly on an aluminum plate（180×120×3 nm^2）, which was covered by a transparent plate. The working fluid employed was ethanol. As the results, the influence parameters of thermal performance were investigated, such as filling ratio, heat load and operational orientations etc. Filling ratio was found to be a critical parameter, and its effect was rather complicated. According to its values the PHP plate could have four distinct working zones with different operational characteristics and heat transfer performance. The effect of heat load on thermal performance was found to be positive, and in general, iucrcasing the heat load would improve heat transfer performance. In order to analyze the effect of gravity on thermal performance, three different heat modes and total seven tilt angles were tested and compared. Successful operation at all orientations with respect to gravity was also achieved.展开更多
The paper presents the results of development and investigation of a copper miniature loop heat pipe (LHP) with acetone as a working fluid. The device was equipped with a flat evaporator measuring 80 × 42 × ...The paper presents the results of development and investigation of a copper miniature loop heat pipe (LHP) with acetone as a working fluid. The device was equipped with a flat evaporator measuring 80 × 42 × 7 mm and vapor and liquid lines with an outside diameter of 3 mm, whose lengths were 145 mm and 175 mm, respectively. The LHP was tested at heat loads from 5 W to 60 W, different orientations in the gravity field and heat-sink temperatures from -40°C to +50°C. It is shown that the LHP retains its efficiency at all testing conditions. It is also mentioned that at a heat-sink temperature of +50°C the device operates in the mode of constant conductivity in the whole range of heat loads, and in this case a minimum thermal resistance of the “heat source-heat sink” system equal to 0.16°C/W is achieved, which is independent of the LHP orientation in the gravity field.展开更多
This paper investigated the influence of geometric factors of vapor groove structures on the performance of flat evaporator of a loop heat pipe system. COMSOL multiphysics software was employed to simulate the heat tr...This paper investigated the influence of geometric factors of vapor groove structures on the performance of flat evaporator of a loop heat pipe system. COMSOL multiphysics software was employed to simulate the heat transfer in the evaporator with convex platforms of different shapes,sizes and area ratios(φ)between convex platforms and the heated surface. The maximum temperature and temperature distribution of each model were obtained. The results showed that the decrease of the size of platforms and the increase of φ can lower temperatures and improve temperature distribution homogeneity of the heated surface. Compared with circle and oval platforms,square platforms achieved lower temperature. The results also indicated that φ had the most significant impact on the performance of the evaporator.展开更多
基金Project(50876016) support by the National Natural Science Foundation of China
文摘An innovative flat heat pipe radiator was put forward, and it has the features of high efficiency of heat dissipation, compact construction, low thermal resistance, light weight, low cost, and anti-dust-deposition. The thermal analysis of the flat heat pipe radiator for cooling high-power light emitting diode （LED） array was conducted. The thermal characteristics of the flat heat pipe radiator under the different heat loads and incline angles were investigated experimentally in natural convection. An electro-thermal conversion method was used to measure the junction temperature of the LED chips. It is found that the integral temperature distribution of the flat heat pipe radiator is reasonable and uniform. The total thermal resistance of the flat heat pipe radiator varies in the range of 0.38-0.45 K/W. The junction temperatures of LED chips with the flat heat pipe radiator and with the aluminum board at the same forward current of 0.35 A are 52.5 and 75.2 ℃, respectively.
基金supported by Industrial Foresight Project in Yangzhou City(No.YZ2021002)Transformation of Scientific and Technical Achievements Project in Yangzhou City(No.YZ2021121)National Key Research and Development Plan of China(No.2018YFA0702300)。
文摘To unravel the intricacies of two-phase gas-liquid flow characteristics and heat transfer behavior,an array mini-channel gravity plate heat pipe(AMGPHP)is proposed in this work,which allows for observing the internal changes in the state of the working fluids.The flow patterns such as pool flow,columnar flow,and slug flow,are experimentally explored and analyzed in detail.It is found that the optimal volume fill ratio is 20%by utilizing start-up time and thermal resistance as performance evaluation metrics.With this fill ratio,a medium optimization strategy by blending ethanol within R141b is proposed and evaluated.In comparison to pure working fluids,the heat transfer performance of AMGFHP in the binary fluid has been significantly augmented due to temperature and concentration shifts resulting from disparate boiling points.Under the 10%volume fraction ethanol blending condition,the equivalent thermal conductivity of the heat pipe is dramatically elevated,with a value of 3110 W/(m·℃),along with the reduction of the minimum start-up power to 4 W.In general,applying such a medium to heat pipes has considerable potential in practical applications.
基金supported by the National Natural Science Foundation of China(Granted No.52176156)。
文摘The heat transfer performance of ultra-thin flat heat pipes with#180 copper mesh wick was studied by numerical simulation for different heating powers.The length,width and height of the ultra-thin flat heat pipe are 80 mm,8.5 mm and 1 mm,respectively.The temperature distribution and flow characteristics of ultra-thin flat heat pipes were simulated by coupling porous media model and user-defined function(UDF)in FLUENT.To validate the accuracy of the numerical model,the simulation results of the ultra-thin flat heat pipe are compared with the experimental data in predicting the evaporation section temperature.The numerical model has good accuracy for the one-dimensional heat transfer method of ultra-thin flat heat pipes.The velocity,pressure drop of the wick and total temperature difference have the same variation trend.With the increase of heating power,the temperature difference of ultra-thin flat heat pipes increases,and the pressure drop and the liquid velocity in the wick also increase.
基金the Ger man National Science Foundation (GR-412/33-2)Shanghai Leading Academic Discipline Project (No.B604)
文摘This paper presents an experimental study including visualization on a flat plate closed loop pulsating heat pipes.It consists of a total of 40 channels with square cross section(2 mm×2 mm,165 mm long) machined directly on an aluminum plate(180 mm×120 mm×3 mm) covered by a transparent plate.The working fluid employed is ethanol.As a result,various flow patterns and their transitions are observed and found to be related to the fluid fill ratio,input heat load and the device orientation.Also the operational characteristics and working mechanism are discussed.
基金Supported by the Ger man National Science Foundation (DFG)(No. GR412/33)
文摘This paper presents an experimental study on a flat plate closed loop pulsating heat pipes. It consisted of total 40 channels with square cross section （2 × 2 mm^2, 165 mm long） machined directly on an aluminum plate（180×120×3 nm^2）, which was covered by a transparent plate. The working fluid employed was ethanol. As the results, the influence parameters of thermal performance were investigated, such as filling ratio, heat load and operational orientations etc. Filling ratio was found to be a critical parameter, and its effect was rather complicated. According to its values the PHP plate could have four distinct working zones with different operational characteristics and heat transfer performance. The effect of heat load on thermal performance was found to be positive, and in general, iucrcasing the heat load would improve heat transfer performance. In order to analyze the effect of gravity on thermal performance, three different heat modes and total seven tilt angles were tested and compared. Successful operation at all orientations with respect to gravity was also achieved.
文摘The paper presents the results of development and investigation of a copper miniature loop heat pipe (LHP) with acetone as a working fluid. The device was equipped with a flat evaporator measuring 80 × 42 × 7 mm and vapor and liquid lines with an outside diameter of 3 mm, whose lengths were 145 mm and 175 mm, respectively. The LHP was tested at heat loads from 5 W to 60 W, different orientations in the gravity field and heat-sink temperatures from -40°C to +50°C. It is shown that the LHP retains its efficiency at all testing conditions. It is also mentioned that at a heat-sink temperature of +50°C the device operates in the mode of constant conductivity in the whole range of heat loads, and in this case a minimum thermal resistance of the “heat source-heat sink” system equal to 0.16°C/W is achieved, which is independent of the LHP orientation in the gravity field.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51276012)
文摘This paper investigated the influence of geometric factors of vapor groove structures on the performance of flat evaporator of a loop heat pipe system. COMSOL multiphysics software was employed to simulate the heat transfer in the evaporator with convex platforms of different shapes,sizes and area ratios(φ)between convex platforms and the heated surface. The maximum temperature and temperature distribution of each model were obtained. The results showed that the decrease of the size of platforms and the increase of φ can lower temperatures and improve temperature distribution homogeneity of the heated surface. Compared with circle and oval platforms,square platforms achieved lower temperature. The results also indicated that φ had the most significant impact on the performance of the evaporator.
