High purity ammonium metavanadate(NH_(4)VO_(3))is the most vital chemical to produce V2O5,VO2,VN alloy,VFe alloy and VOSO4,which have some prospective applications for high strength steel,smart window,infrared detecto...High purity ammonium metavanadate(NH_(4)VO_(3))is the most vital chemical to produce V2O5,VO2,VN alloy,VFe alloy and VOSO4,which have some prospective applications for high strength steel,smart window,infrared detector and imaging,large scale energy storage system.NH_(4)VO_(3)is usually produced by spontaneous crystallization from the aqueous solution due to its sharp dependence of solubility on the temperature.However,hazardous chemicals in industrial effluent,include phosphorate,silicate and arsenate,causing severe damage to the environment.In this work,these impurities are selectively precipitated onto inorganic flocculants,while the vanadate dissolved in an aqueous solution keeps almost undisturbed.Therefore,high purity NH_(4)VO_(3)is produced by the crystallization from the purified solution.By screening various flocculants and precipitating parameters,polyaluminum sulfate with an optimal amount of 50 g/L,is demonstrated to selectively remove phosphorate,silicate and arsenate,corresponding to the removing efficiency of 93.39%,97.11%and 88.31%,respectively.NH_(4)VO_(3)from the purified solution holds a purity of 99.21%,in comparison with 98.33%in the product from the crude solution.This purifying technology cannot only produce NH_(4)VO_(3)with high added value,but also reduce the environmental pollution of waste liquid.展开更多
Cyanobacteria can accumulate as a heavy biomass on the leeward side of large eutrophic lakes,posing a potential threat to public health.The mitigating capacity of three flocculants and their potential impacts on the m...Cyanobacteria can accumulate as a heavy biomass on the leeward side of large eutrophic lakes,posing a potential threat to public health.The mitigating capacity of three flocculants and their potential impacts on the major environmental features of water and sediments was evaluated.Results indicate that polyaluminum chloride(PAC)and ferric chloride(FeCl)are efficient flocculants that can rapidly mitigate cyanobacterial blooms with chlorophyll-a concentrations higher tnan 1500 ug/L within 15 min.In comparison,cationic starch with chitosan could only treat cyanobacterial blooms in chlorophyll-a concentrations of less than 200μg/L.The addition of FeClcaused a decline in the pH value,while dissolved oxygen in the water column dropped to 2 mg/L during cationic starch with chitosan treatment for a high cyanobacterial biomass group.Thus,a combination of flocculants and oxygenators should be considered when treating high-concentration cyanobacterial blooms for emergency purposes.Additionally,the cell lysis of cyanobacteria caused by cationic starch with chitosan can result in an increase in total dissolved phosphorus and total dissolved nitrogen.Furthermore,the high accumlation of nutrients in sediments after the settling of cyanobacteria can cause high internal phosphorus pollution.The increase in the total organic carbon of the sediments can threaten lake restoration achieved by planting submerged macrophytes.展开更多
The article critically reviews the applications of biopolymers in the area of water treatment. A number of biopolymers were reported for their flocculation behavior for treating the wastewater and making it suitable f...The article critically reviews the applications of biopolymers in the area of water treatment. A number of biopolymers were reported for their flocculation behavior for treating the wastewater and making it suitable for various industrial as well as agricultural purposes via chemical alteration onto its backbone. Wastewater treatment was followed by flocculation process using standard ‘Jar test protocol’. Minute quantities of dosage were found be ideal to diminish the organic, biological and suspended loads from wastewater sample. The process of flocculation using biopolymers was also found economically suitable compared to other various processes applied in water treatment.展开更多
Although inorganic phosphate is an essential plant nutrient, elevated levels in surface waters lead to adverse effects in the environment. These effects are attributed to runoff from rain or irrigation events that may...Although inorganic phosphate is an essential plant nutrient, elevated levels in surface waters lead to adverse effects in the environment. These effects are attributed to runoff from rain or irrigation events that may cause the sorbed phosphate to be transported from the application sites and to move into neighboring watersheds. Increased phosphate concentration in watersheds may lead to a variety of environmental problems including increased algal blooms, bacterial contamination, and in some cases eutrophication. To overcome these effects, polymer flocculants have been shown to reduce the phosphate concentration in water by removing suspended solids and thereby removing the phosphate sorbed to the solids. The purpose of this study is to determine the amount, if any, of phosphate removed by several commercial polymers. The polymers chosen include the polyacrylamides Magnifloc 494C, Magnifloc 985N and Poly (diallyldimethyl ammonium chloride) (Poly (DADMAC)). Using these polymers, it is discovered that the positive charge density of the polymers affects the amount of phosphate removed from solution with Poly (DADMAC) (having 100% positive charge density) removing 40% of the phosphate from a solution containing 10 ppm phosphate.展开更多
Suitable amounts of Al(OH)3, Na OH and synthetic hematite or goethite were taken to be digested under the simulated condition of the Bayer process and subsequently diluted with simulative Bayer red mud lotion, then th...Suitable amounts of Al(OH)3, Na OH and synthetic hematite or goethite were taken to be digested under the simulated condition of the Bayer process and subsequently diluted with simulative Bayer red mud lotion, then the synthetic hematite or goethite suspension was obtained. The flocculation effect of self-made modified poly(acrylic acids) flocculants containing hydroxamic acid groups(abbreviated as HPAA) on the synthetic hematite or goethite suspension was studied. The experimental results show that with the increase of the dosages of added flocculants, the average settling rate of the synthetic hematite or goethite suspension in the first 1min speeds up, the supernatant solids decrease. It could also be found that there is generally a decrease in the average settling rate of the synthetic hematite or goethite suspension in the first 1 min with increasing solid content of the suspension. When the solid content of hematite or goethite of the suspension is 50 g/L with 240 g/t dosage of HPAA, HPAA has a better flocculation effect on the synthetic goethite suspension than on the synthetic hematite suspension. The adsorption mechanism of HPAA on the surface of hematite or goethite was investigated by Fourier transform infrared spectroscopy(FT-IR) and X-ray photoelectron spectroscopy(XPS).All the results suggest that HPAA is adsorbed on the hematite or goethite surface by a chemisorption, and it has a stronger adsorption on the goethite surface than on the hematite surface.展开更多
Western Canada’s oil sands hold the third-largest hydrocarbon deposits in the world.Bitumen,a very heavy petroleum,is currently recovered by surface mining with warm water or in situ.Recovery processes that use organ...Western Canada’s oil sands hold the third-largest hydrocarbon deposits in the world.Bitumen,a very heavy petroleum,is currently recovered by surface mining with warm water or in situ.Recovery processes that use organic solvents are being developed to reduce water usage and tailings production.While solvent-based methods can effectively extract bitumen,removal of residual fine solids from diluted bitumen product(DBP)to meet the pipeline transport requirement of<0.5 wt%solids and water in DBP remains a major challenge.We propose a novel area of application of polymer flocculants for fine solids removal from DBP.In principle,polymer flocculants can be applied to help remove these residual solids in conjunction with physical separation processes to increase process effectiveness and energy efficiency.Several polymers are selected and screened for flocculation behavior using kaolinite suspended in DBP and toluene,as a model system.Focused beam reflectance measurements and force tensiometer techniques are used to determine flocculation and sedimentation in DBP.The observed flocculation and sedimentation rate enhancements indicate that the polymers tested have only minor effects,providing opportunities for advanced polymer development.These findings exemplify the challenges in identifying polymers that may be effective as flocculants in heavy petroleum media.展开更多
Inorganic phosphate is a common nutrient that is applied as a fertilizer to both agricultural fields as well as urban settings such as private yards, public parks and other urban landscaping. While phosphate typically...Inorganic phosphate is a common nutrient that is applied as a fertilizer to both agricultural fields as well as urban settings such as private yards, public parks and other urban landscaping. While phosphate typically binds tightly to soil, movement of phosphate off of application sites can occur through soil erosion. The soil and its bound phosphate can then end up in surface waters such as rivers and lakes. Phosphate found in surface water bodies exists both as bound to the suspended clay as well as that free in solution. Elevated phosphate concentration in surface waters can lead to algal blooms and eutrophication. While the phosphate bound to clay in suspension in surface water bodies can be removed by commercially available polymer flocculants, the phosphate that is free in solution is more challenging as it is usually found in low concentrations and other anionic salts are generally present in higher concentrations. To remove phosphate from contaminated water systems, where other anions exist at higher concentrations, it is favorable to have a method of removal that is selective for phosphate. As a proof of principle, thiourea derivatized polymer flocculants were examined for the selective removal of phosphate in the presence of competing anions. The polymer flocculants exhibited selectivity for phosphate through hydrogen bonding and were effective at removing up to 43% of phosphate from simulated wastewater. Computational studies and </span><sup><span style="font-family:Verdana;">1</span></sup><span style="font-family:Verdana;">H NMR were used to investigate the selectivity of the thiourea monomer for phosphate over competing anions such as chloride and sulfate.展开更多
Novel cellulose based flocculants C-g-P(DMC) with various chain architectures are synthesized through a situ graft copolymerization. The cationic ammonium chloride group(DMC) is grafted onto cellulose by two separate ...Novel cellulose based flocculants C-g-P(DMC) with various chain architectures are synthesized through a situ graft copolymerization. The cationic ammonium chloride group(DMC) is grafted onto cellulose by two separate inverse emulsion polymerization with γ-methacryloxypropyl trimethoxy silane(KH-570) and double bond addition reactions, which is a new and simple method to employ KH-570 as a bridge for the connection of cellulose matrix and DMC group. The effects of pH, flocculant dose, standing time on turbidity of kaolin suspensions and particle sizes have been studied systematically. In addition, the response surface methodology(RSM) study confirms that PAC and C-g-P(DMC)have synergy in turbidity removal with a higher removal efficiency of 98.32%. Moreover, C-g-P(DMC) 1 has higher removal efficiency with 96.5% at a low dosage of 0.6 mg L^(-1) and better floc properties than C-g-P(DMC) 2 and C-g-P(DMC) 3, suggesting that the length and quantity of cationic branch chains play a crucial role in Kaolin flocculation due to their dramatically enhanced bridging effects.展开更多
The use of new food grade polysaccharides (mucilage) obtained from Hibiscus esculentus and Trigonella foenum graceum,commonly called Okra and Fenugreek,respectively,as flocculants was described.These polysaccharides w...The use of new food grade polysaccharides (mucilage) obtained from Hibiscus esculentus and Trigonella foenum graceum,commonly called Okra and Fenugreek,respectively,as flocculants was described.These polysaccharides were used for removal of solids (suspended solids (SS) and total dissolved solids (TDS)) and dyes from real textile effluents and aqueous solutions of different class of synthetic dyes.Influences of varying polysaccharide concentration,contact time and pH on removal of pollutant from the text...展开更多
Clay deflocculants that are commonly used in water-based muds under <span style="font-family:Verdana;">high temperature high pressure (HTHP) oilwell drilling conditions have been found to contain chrom...Clay deflocculants that are commonly used in water-based muds under <span style="font-family:Verdana;">high temperature high pressure (HTHP) oilwell drilling conditions have been found to contain chromium which is toxic. Tannin-based deflocculants are regarded as a more environmentally friendly and suitable alternative to the chrome-based deflocculants. However, tannin-based deflocculants have not been studied extensively and understood completely, and for the past two years, there have not been many active pieces of research in the area. To advance research in the area, there is a need to critically and holistically review research works that have been done so far on tannin-based deflocculants as drilling mud additives to identify research challenges and opportunities. This review paper provides an overview of tannin-based deflocculants used in water-based muds under HTHP drilling conditions, including the various forms, thermal stability, deflocculating ability and environmental acceptance of the deflocculant. The review revealed that under HTHP conditions, modified and unmodified tannin-based deflocculants both deflocculate water muds well and are thermostable. However, only a few studies have been conducted on their usage as deflocculants at temperatures of 150</span><span style="font-family:Verdana;"><span style="white-space:nowrap;">º</span>C</span><span style="font-family:Verdana;"> or above. The research gaps identified if pursued could advance the use of tannin-based deflocculants as green substitutes for the conventional chrome-based deflocculants.展开更多
A series of novel chitosan-based magnetic flocculants FS@CTS-P(AM-DMC)was prepared by molecular structure control.The characterization results showed that FS@CTS-P(AM-DMC)had a uniform size of about 21.46 nm,featuring...A series of novel chitosan-based magnetic flocculants FS@CTS-P(AM-DMC)was prepared by molecular structure control.The characterization results showed that FS@CTS-P(AM-DMC)had a uniform size of about 21.46 nm,featuring a typical core-shell structure,and the average coating layer thickness of CTS-P(AM-DMC)was about 5.03 nm.FS@CTS-P(AM-DMC)exhibited excellent flocculation performance for kaolin suspension,achieved 92.54% turbidity removal efficiency under dosage of 150 mg/L,pH 7.0,even at high turbidity(2000 NTU)with a removal efficiency of 96.96%.The flocculation mechanism was revealed to be dominated by charge neutralization under acidic and neutral conditions,while adsorption and bridging effects play an important role in alkaline environments.The properties of magnetic aggregates during flocculation,breakage,and regeneration were studied at different pH levels and dosages.In the process of magnetophoretic,magnetic particles collide and adsorb with kaolin particles continuously due to magnetic and electrostatic attraction,transform into magnetic chain clusters,and then further form three-dimensional network magnetic aggregates that can capture free kaolin particles and other chain clusters.Particle image velocimetry confirmed the formation of eddy current of magnetic flocs and experienced three stages:acceleration,stabilization,and deceleration.展开更多
In this study,three magnetic flocculants with different chelating groups,namely,carboxymethyl chitosan-modified Fe_(3)O_(4)flocculant(MC),acrylamide-grafted magnetic carboxymethyl chitosan flocculant(MCM),and 2-acryla...In this study,three magnetic flocculants with different chelating groups,namely,carboxymethyl chitosan-modified Fe_(3)O_(4)flocculant(MC),acrylamide-grafted magnetic carboxymethyl chitosan flocculant(MCM),and 2-acrylamide-2-methylpropanesulfonic acid copolyacrylamide-grafted magnetic carboxymethyl chitosan flocculant(MCAA)were prepared,synthesized,and characterized by photopolymerization technology.They were applied to the flocculation removal of Cr(Ⅲ),Co(Ⅱ),and Pb(Ⅱ).The effect of flocculation condition on the removal performance of Cr(Ⅲ),Co(Ⅱ),and Pb(Ⅱ)was studied.Characterization results show that the three magnetic carboxymethyl chitosan-based flocculants have been successfully prepared with good magnetic induction properties.Flocculation results show that the removal rates of MC,MCM,and MCAA on Cr(Ⅲ)are 51.79%,82.33%,and 91.42%,respectively,under the conditions of 80 mg/L flocculant,pH value of 6,reaction time of 1.5 hr,G value of 200 s^(-1),and precipitation magnetic field strength of 120 mT.The removal rates of Co(Ⅱ)by MC,MCM,and MCAA are 54.33%,84.99%,and 90.49%,respectively.The removal rates of Pb(Ⅱ)by MC,MCM,and MCAA are 61.54%,91.32%,and 95.74%,respectively.MCAA shows good flocculation performance in composite heavy metal-simulated wastewater.The magnetic carboxymethyl chitosan-based flocculant shows excellent flocculation performance in removing soluble heavy metals.This research provides guidance and ideas for the development of efficient and low-cost flocculation technology to remove heavy metals in wastewater.展开更多
Deep-sea sediment disturbance may occur when collecting polymetallic nodules,resulting in the creation of plumes that could have a negative impact on the ecological environment.This study aims to investigate the poten...Deep-sea sediment disturbance may occur when collecting polymetallic nodules,resulting in the creation of plumes that could have a negative impact on the ecological environment.This study aims to investigate the potential solution of using polyaluminum chloride(PAC)in the water jet.The effects of PAC are examined through a self-designed simulation system for deep-sea polymetallic nodule collection and sediment samples from a potential deep-sea mining area.The experimental results showed that the optimal PAC dose was found to be 0.75 g/L.Compared with the test conditions without the addition of PAC,the presence of PAC leads to a reduction in volume,lower characteristic turbidity,smaller diffusion velocity,and shorter settling time of the plume.This indicates that PAC inhibits the entire development process of the plume.The addition of PAC leads to the flocculation of mm-sized particles,resulting in the formation of cm-sized flocs.The flocculation of particles decreases the rate of erosion on the seabed by around 30%.This reduction in erosion helps to decrease the formation of plumes.Additionally,when the size of suspended particles increases,it reduces the scale at which they diffuse.Furthermore,the settling velocity of flocs(around 10^(-2) m/s)is much higher that of compared to sediment particles(around 10^(-5) m/s),which effectively reduces the amount of time the plume remains in suspension.展开更多
This study presents a comparative study of the flocculation behavior of kaolinite induced by chitosan-graft-poly(acrylamide-dimethyl diallyl ammonium chloride)(Chi-g-CPAM) and a commercial cationic polyacrylamide(CPAM...This study presents a comparative study of the flocculation behavior of kaolinite induced by chitosan-graft-poly(acrylamide-dimethyl diallyl ammonium chloride)(Chi-g-CPAM) and a commercial cationic polyacrylamide(CPAM).The flocculation behaviour was characterised in terms of both flocculation kinetics and the corresponding morphology changes during flocculation.Both Chi-g-CPAM and CPAM were grafted from silica wafers by means of atom transfer radical polymerization(ATRP).The quartz crystal microbalance with dissipation(QCM-D) tests were conducted.The equilibrium time flocculated by Chi-g-CPAM was found to be 0.46 times as that of CPAM,together with a larger total mass of kaolinite layer.The flocculation behaviour by Chi-g-CPAM can be well captured by a pseudo-first-order model.In contrast,the presence of CPAM leads to a more complex kinetics.A relatively larger fitting slope(0.4663) was obtained at the initial stage but the fitting slope droped to 0.2026 after 800 min,indicating a densification process caused by CPAM.The flocculation kinetics of CPAM can be captured by the Elovich model for the inital stage but the combination of pseudo-first-order and pseudo-second-order models for the latter stages,which can be attributed to the long chain of CPAM.With a dosage of 75 g/t,the settling test with Chi-g-CPAM exhibits the same turbidity in the supernatant but a smaller layer thickness of the settlement compared to CPAM.The study enables a better understanding of the flocculation behavior and contributes to the development of efficient flocculants in mineral processing and tailings treatment.展开更多
The polyacrylamide which is directly added into concrete shows strong water absorption property.Thus the construction of underwater constructure would demand high amount of water,resulting in poor workability of concr...The polyacrylamide which is directly added into concrete shows strong water absorption property.Thus the construction of underwater constructure would demand high amount of water,resulting in poor workability of concrete and strength shrinkage after hardening.Herein,a kind of anionic polyacrylamide(APAM)grafted with water reducing functional group(-COOH)was synthesized at low temperatures by partial factor design and response surface design.The structure and morphology of APAM were characterized by UV,FTIR and SEM methods.The experimental results show that the molecular weight of the synthesized APAM could reach 11 million,under the condition that the temperature was 35℃,the pH value was 8,the monomer concentration was 27wt%,the initiator dosage was 0.6wt%,and the monomer ratio(n(AM):n(AA))was 3.When the APAM was applied into the underwater slurry,it presented good flocculation and low water demand.When the dosage was 1%of the mass of the cement,the water demand increased by 12%,which could meet the self-leveling and anti-dispersity of the underwater slurry at the same time.This technology provides technical guidance for the large-scale industrial production of polyacrylamide for underwater concrete construction while achieving environmental protection during production.展开更多
This works aims at preparing at room stable Na2FeO4 and tracking its degradation over time. The synthetic, during this step, was carried out by electrochemical method. The latter was given maximum focus because of its...This works aims at preparing at room stable Na2FeO4 and tracking its degradation over time. The synthetic, during this step, was carried out by electrochemical method. The latter was given maximum focus because of its simplicity and the high degree of purity of the resulting product with respect to wet and dry method. This paper reviews the development of the electrochemical method applied to the synthesis of stable at room Na2FeO4, optimizing the parameters impacting the performance of the oxidation of iron(II) in to iron(VI) in alkaline NaOH, saturated at a temperature of 61°C and a current density of 1.4 A/dm2, in order to simplify the synthesis process, to minimize the cost and to improve the production of iron(VI) to meet the growing demand of ferrate(VI) useful for water treatment. The supervision of the degradation of synthesized Na2FeO4 shows its stability over a period of 10 months, which makes storage and transport easier. The phases obtained were characterized by IR spectrometry, X-ray, M?ssbauer, spectroscopy and thermogravimeric analysis.展开更多
[Objective] The technological parameter suitable for the dewatering of dredged sediment from Dianchi Lake was studied.[Method] By means of the treatment method of sewage sludge in sewage treatment plant,flocculants in...[Objective] The technological parameter suitable for the dewatering of dredged sediment from Dianchi Lake was studied.[Method] By means of the treatment method of sewage sludge in sewage treatment plant,flocculants including FeCl3,Al2(SO4)3 and PAM were taken as dewatering agents which were added in dredged sediment.[Result] The results showed that Al2(SO4)3 had better dewatering effect than FeCl3 and PAM,and the optimum dosing quantity of Al2(SO4)3 in dredged sediment was 170 mg/L,in addition,the water quality of supernatant met the first class B standard of GB18918-2002 and could be directly discharged to nature water without pollution.[Conclusion] The study could provide a simple and feasible way for the rapid dewatering of dredged sediment from Dianchi Lake,which would be convenient for the disposal and resource utilization of dredged sediment.展开更多
The coagulation flocculation experiments for kaolinite suspension were carried out withpolyaluminurn chloride of various basicities. The rnicroelectrophoresis mobility and adsorption of alu-minum species were determin...The coagulation flocculation experiments for kaolinite suspension were carried out withpolyaluminurn chloride of various basicities. The rnicroelectrophoresis mobility and adsorption of alu-minum species were determined simultaneously. The quantitative re展开更多
基金support from the Natural Science Foundation of Hubei Province(2020BED011)XPS characterizations and ICP-OES were carried out in the Analytical and Testing Center in HUST.
文摘High purity ammonium metavanadate(NH_(4)VO_(3))is the most vital chemical to produce V2O5,VO2,VN alloy,VFe alloy and VOSO4,which have some prospective applications for high strength steel,smart window,infrared detector and imaging,large scale energy storage system.NH_(4)VO_(3)is usually produced by spontaneous crystallization from the aqueous solution due to its sharp dependence of solubility on the temperature.However,hazardous chemicals in industrial effluent,include phosphorate,silicate and arsenate,causing severe damage to the environment.In this work,these impurities are selectively precipitated onto inorganic flocculants,while the vanadate dissolved in an aqueous solution keeps almost undisturbed.Therefore,high purity NH_(4)VO_(3)is produced by the crystallization from the purified solution.By screening various flocculants and precipitating parameters,polyaluminum sulfate with an optimal amount of 50 g/L,is demonstrated to selectively remove phosphorate,silicate and arsenate,corresponding to the removing efficiency of 93.39%,97.11%and 88.31%,respectively.NH_(4)VO_(3)from the purified solution holds a purity of 99.21%,in comparison with 98.33%in the product from the crude solution.This purifying technology cannot only produce NH_(4)VO_(3)with high added value,but also reduce the environmental pollution of waste liquid.
基金Supported by the National Science Foundation of China(Nos.32071573,41877544)the Science and Technology Service Network Initiative of Chinese Academy of Sciences(No.KFJ-STS-QYZD-2021-01-002)the Science and Technology Achievement Transformation Foundation of Inner Mongolia Autonomous Region(No.2021CG0013)。
文摘Cyanobacteria can accumulate as a heavy biomass on the leeward side of large eutrophic lakes,posing a potential threat to public health.The mitigating capacity of three flocculants and their potential impacts on the major environmental features of water and sediments was evaluated.Results indicate that polyaluminum chloride(PAC)and ferric chloride(FeCl)are efficient flocculants that can rapidly mitigate cyanobacterial blooms with chlorophyll-a concentrations higher tnan 1500 ug/L within 15 min.In comparison,cationic starch with chitosan could only treat cyanobacterial blooms in chlorophyll-a concentrations of less than 200μg/L.The addition of FeClcaused a decline in the pH value,while dissolved oxygen in the water column dropped to 2 mg/L during cationic starch with chitosan treatment for a high cyanobacterial biomass group.Thus,a combination of flocculants and oxygenators should be considered when treating high-concentration cyanobacterial blooms for emergency purposes.Additionally,the cell lysis of cyanobacteria caused by cationic starch with chitosan can result in an increase in total dissolved phosphorus and total dissolved nitrogen.Furthermore,the high accumlation of nutrients in sediments after the settling of cyanobacteria can cause high internal phosphorus pollution.The increase in the total organic carbon of the sediments can threaten lake restoration achieved by planting submerged macrophytes.
文摘The article critically reviews the applications of biopolymers in the area of water treatment. A number of biopolymers were reported for their flocculation behavior for treating the wastewater and making it suitable for various industrial as well as agricultural purposes via chemical alteration onto its backbone. Wastewater treatment was followed by flocculation process using standard ‘Jar test protocol’. Minute quantities of dosage were found be ideal to diminish the organic, biological and suspended loads from wastewater sample. The process of flocculation using biopolymers was also found economically suitable compared to other various processes applied in water treatment.
文摘Although inorganic phosphate is an essential plant nutrient, elevated levels in surface waters lead to adverse effects in the environment. These effects are attributed to runoff from rain or irrigation events that may cause the sorbed phosphate to be transported from the application sites and to move into neighboring watersheds. Increased phosphate concentration in watersheds may lead to a variety of environmental problems including increased algal blooms, bacterial contamination, and in some cases eutrophication. To overcome these effects, polymer flocculants have been shown to reduce the phosphate concentration in water by removing suspended solids and thereby removing the phosphate sorbed to the solids. The purpose of this study is to determine the amount, if any, of phosphate removed by several commercial polymers. The polymers chosen include the polyacrylamides Magnifloc 494C, Magnifloc 985N and Poly (diallyldimethyl ammonium chloride) (Poly (DADMAC)). Using these polymers, it is discovered that the positive charge density of the polymers affects the amount of phosphate removed from solution with Poly (DADMAC) (having 100% positive charge density) removing 40% of the phosphate from a solution containing 10 ppm phosphate.
基金Project(51174231)supported by National Natural Science Foundation of China
文摘Suitable amounts of Al(OH)3, Na OH and synthetic hematite or goethite were taken to be digested under the simulated condition of the Bayer process and subsequently diluted with simulative Bayer red mud lotion, then the synthetic hematite or goethite suspension was obtained. The flocculation effect of self-made modified poly(acrylic acids) flocculants containing hydroxamic acid groups(abbreviated as HPAA) on the synthetic hematite or goethite suspension was studied. The experimental results show that with the increase of the dosages of added flocculants, the average settling rate of the synthetic hematite or goethite suspension in the first 1min speeds up, the supernatant solids decrease. It could also be found that there is generally a decrease in the average settling rate of the synthetic hematite or goethite suspension in the first 1 min with increasing solid content of the suspension. When the solid content of hematite or goethite of the suspension is 50 g/L with 240 g/t dosage of HPAA, HPAA has a better flocculation effect on the synthetic goethite suspension than on the synthetic hematite suspension. The adsorption mechanism of HPAA on the surface of hematite or goethite was investigated by Fourier transform infrared spectroscopy(FT-IR) and X-ray photoelectron spectroscopy(XPS).All the results suggest that HPAA is adsorbed on the hematite or goethite surface by a chemisorption, and it has a stronger adsorption on the goethite surface than on the hematite surface.
文摘Western Canada’s oil sands hold the third-largest hydrocarbon deposits in the world.Bitumen,a very heavy petroleum,is currently recovered by surface mining with warm water or in situ.Recovery processes that use organic solvents are being developed to reduce water usage and tailings production.While solvent-based methods can effectively extract bitumen,removal of residual fine solids from diluted bitumen product(DBP)to meet the pipeline transport requirement of<0.5 wt%solids and water in DBP remains a major challenge.We propose a novel area of application of polymer flocculants for fine solids removal from DBP.In principle,polymer flocculants can be applied to help remove these residual solids in conjunction with physical separation processes to increase process effectiveness and energy efficiency.Several polymers are selected and screened for flocculation behavior using kaolinite suspended in DBP and toluene,as a model system.Focused beam reflectance measurements and force tensiometer techniques are used to determine flocculation and sedimentation in DBP.The observed flocculation and sedimentation rate enhancements indicate that the polymers tested have only minor effects,providing opportunities for advanced polymer development.These findings exemplify the challenges in identifying polymers that may be effective as flocculants in heavy petroleum media.
文摘Inorganic phosphate is a common nutrient that is applied as a fertilizer to both agricultural fields as well as urban settings such as private yards, public parks and other urban landscaping. While phosphate typically binds tightly to soil, movement of phosphate off of application sites can occur through soil erosion. The soil and its bound phosphate can then end up in surface waters such as rivers and lakes. Phosphate found in surface water bodies exists both as bound to the suspended clay as well as that free in solution. Elevated phosphate concentration in surface waters can lead to algal blooms and eutrophication. While the phosphate bound to clay in suspension in surface water bodies can be removed by commercially available polymer flocculants, the phosphate that is free in solution is more challenging as it is usually found in low concentrations and other anionic salts are generally present in higher concentrations. To remove phosphate from contaminated water systems, where other anions exist at higher concentrations, it is favorable to have a method of removal that is selective for phosphate. As a proof of principle, thiourea derivatized polymer flocculants were examined for the selective removal of phosphate in the presence of competing anions. The polymer flocculants exhibited selectivity for phosphate through hydrogen bonding and were effective at removing up to 43% of phosphate from simulated wastewater. Computational studies and </span><sup><span style="font-family:Verdana;">1</span></sup><span style="font-family:Verdana;">H NMR were used to investigate the selectivity of the thiourea monomer for phosphate over competing anions such as chloride and sulfate.
基金supported by the National Natural Science Foundation of China (51379077,21607044)the Fundamental Research Funds for the Central Universities (2016MS108)Natural Science Foundation of Hebei Province (B2017502069)
文摘Novel cellulose based flocculants C-g-P(DMC) with various chain architectures are synthesized through a situ graft copolymerization. The cationic ammonium chloride group(DMC) is grafted onto cellulose by two separate inverse emulsion polymerization with γ-methacryloxypropyl trimethoxy silane(KH-570) and double bond addition reactions, which is a new and simple method to employ KH-570 as a bridge for the connection of cellulose matrix and DMC group. The effects of pH, flocculant dose, standing time on turbidity of kaolin suspensions and particle sizes have been studied systematically. In addition, the response surface methodology(RSM) study confirms that PAC and C-g-P(DMC)have synergy in turbidity removal with a higher removal efficiency of 98.32%. Moreover, C-g-P(DMC) 1 has higher removal efficiency with 96.5% at a low dosage of 0.6 mg L^(-1) and better floc properties than C-g-P(DMC) 2 and C-g-P(DMC) 3, suggesting that the length and quantity of cationic branch chains play a crucial role in Kaolin flocculation due to their dramatically enhanced bridging effects.
文摘The use of new food grade polysaccharides (mucilage) obtained from Hibiscus esculentus and Trigonella foenum graceum,commonly called Okra and Fenugreek,respectively,as flocculants was described.These polysaccharides were used for removal of solids (suspended solids (SS) and total dissolved solids (TDS)) and dyes from real textile effluents and aqueous solutions of different class of synthetic dyes.Influences of varying polysaccharide concentration,contact time and pH on removal of pollutant from the text...
文摘Clay deflocculants that are commonly used in water-based muds under <span style="font-family:Verdana;">high temperature high pressure (HTHP) oilwell drilling conditions have been found to contain chromium which is toxic. Tannin-based deflocculants are regarded as a more environmentally friendly and suitable alternative to the chrome-based deflocculants. However, tannin-based deflocculants have not been studied extensively and understood completely, and for the past two years, there have not been many active pieces of research in the area. To advance research in the area, there is a need to critically and holistically review research works that have been done so far on tannin-based deflocculants as drilling mud additives to identify research challenges and opportunities. This review paper provides an overview of tannin-based deflocculants used in water-based muds under HTHP drilling conditions, including the various forms, thermal stability, deflocculating ability and environmental acceptance of the deflocculant. The review revealed that under HTHP conditions, modified and unmodified tannin-based deflocculants both deflocculate water muds well and are thermostable. However, only a few studies have been conducted on their usage as deflocculants at temperatures of 150</span><span style="font-family:Verdana;"><span style="white-space:nowrap;">º</span>C</span><span style="font-family:Verdana;"> or above. The research gaps identified if pursued could advance the use of tannin-based deflocculants as green substitutes for the conventional chrome-based deflocculants.
基金supported by the National Natural Science Foundation of China(No.51672028)the Fundamental Research Funds for the Central Universities(Nos.2015ZCQ-HJ-02 and 2015PY-08)。
文摘A series of novel chitosan-based magnetic flocculants FS@CTS-P(AM-DMC)was prepared by molecular structure control.The characterization results showed that FS@CTS-P(AM-DMC)had a uniform size of about 21.46 nm,featuring a typical core-shell structure,and the average coating layer thickness of CTS-P(AM-DMC)was about 5.03 nm.FS@CTS-P(AM-DMC)exhibited excellent flocculation performance for kaolin suspension,achieved 92.54% turbidity removal efficiency under dosage of 150 mg/L,pH 7.0,even at high turbidity(2000 NTU)with a removal efficiency of 96.96%.The flocculation mechanism was revealed to be dominated by charge neutralization under acidic and neutral conditions,while adsorption and bridging effects play an important role in alkaline environments.The properties of magnetic aggregates during flocculation,breakage,and regeneration were studied at different pH levels and dosages.In the process of magnetophoretic,magnetic particles collide and adsorb with kaolin particles continuously due to magnetic and electrostatic attraction,transform into magnetic chain clusters,and then further form three-dimensional network magnetic aggregates that can capture free kaolin particles and other chain clusters.Particle image velocimetry confirmed the formation of eddy current of magnetic flocs and experienced three stages:acceleration,stabilization,and deceleration.
基金supported by the Natural Science Foundation of Jiangsu Province in China(No.BK20201362)2018 Six Talent Peaks Project of Jiangsu Province(No.JNHB-038)。
文摘In this study,three magnetic flocculants with different chelating groups,namely,carboxymethyl chitosan-modified Fe_(3)O_(4)flocculant(MC),acrylamide-grafted magnetic carboxymethyl chitosan flocculant(MCM),and 2-acrylamide-2-methylpropanesulfonic acid copolyacrylamide-grafted magnetic carboxymethyl chitosan flocculant(MCAA)were prepared,synthesized,and characterized by photopolymerization technology.They were applied to the flocculation removal of Cr(Ⅲ),Co(Ⅱ),and Pb(Ⅱ).The effect of flocculation condition on the removal performance of Cr(Ⅲ),Co(Ⅱ),and Pb(Ⅱ)was studied.Characterization results show that the three magnetic carboxymethyl chitosan-based flocculants have been successfully prepared with good magnetic induction properties.Flocculation results show that the removal rates of MC,MCM,and MCAA on Cr(Ⅲ)are 51.79%,82.33%,and 91.42%,respectively,under the conditions of 80 mg/L flocculant,pH value of 6,reaction time of 1.5 hr,G value of 200 s^(-1),and precipitation magnetic field strength of 120 mT.The removal rates of Co(Ⅱ)by MC,MCM,and MCAA are 54.33%,84.99%,and 90.49%,respectively.The removal rates of Pb(Ⅱ)by MC,MCM,and MCAA are 61.54%,91.32%,and 95.74%,respectively.MCAA shows good flocculation performance in composite heavy metal-simulated wastewater.The magnetic carboxymethyl chitosan-based flocculant shows excellent flocculation performance in removing soluble heavy metals.This research provides guidance and ideas for the development of efficient and low-cost flocculation technology to remove heavy metals in wastewater.
基金supported by the National Natural Science Foundation of China(Nos.52225107,U2106224,U1906234,51822904,and U1706223)the Fundamental Research Funds for the Central Universities(No.202041004)
文摘Deep-sea sediment disturbance may occur when collecting polymetallic nodules,resulting in the creation of plumes that could have a negative impact on the ecological environment.This study aims to investigate the potential solution of using polyaluminum chloride(PAC)in the water jet.The effects of PAC are examined through a self-designed simulation system for deep-sea polymetallic nodule collection and sediment samples from a potential deep-sea mining area.The experimental results showed that the optimal PAC dose was found to be 0.75 g/L.Compared with the test conditions without the addition of PAC,the presence of PAC leads to a reduction in volume,lower characteristic turbidity,smaller diffusion velocity,and shorter settling time of the plume.This indicates that PAC inhibits the entire development process of the plume.The addition of PAC leads to the flocculation of mm-sized particles,resulting in the formation of cm-sized flocs.The flocculation of particles decreases the rate of erosion on the seabed by around 30%.This reduction in erosion helps to decrease the formation of plumes.Additionally,when the size of suspended particles increases,it reduces the scale at which they diffuse.Furthermore,the settling velocity of flocs(around 10^(-2) m/s)is much higher that of compared to sediment particles(around 10^(-5) m/s),which effectively reduces the amount of time the plume remains in suspension.
基金financially supported by the National Natural Science Foundation of China(No.51604019)the State Key Laboratory of Water Resource Protection and Utilization in Coal Mining,China(No.GJNY-20-113-12)the Foundation of State Key Laboratory of Mineral Processing of China(No.BGRIMMKJSKL-2020-11)。
文摘This study presents a comparative study of the flocculation behavior of kaolinite induced by chitosan-graft-poly(acrylamide-dimethyl diallyl ammonium chloride)(Chi-g-CPAM) and a commercial cationic polyacrylamide(CPAM).The flocculation behaviour was characterised in terms of both flocculation kinetics and the corresponding morphology changes during flocculation.Both Chi-g-CPAM and CPAM were grafted from silica wafers by means of atom transfer radical polymerization(ATRP).The quartz crystal microbalance with dissipation(QCM-D) tests were conducted.The equilibrium time flocculated by Chi-g-CPAM was found to be 0.46 times as that of CPAM,together with a larger total mass of kaolinite layer.The flocculation behaviour by Chi-g-CPAM can be well captured by a pseudo-first-order model.In contrast,the presence of CPAM leads to a more complex kinetics.A relatively larger fitting slope(0.4663) was obtained at the initial stage but the fitting slope droped to 0.2026 after 800 min,indicating a densification process caused by CPAM.The flocculation kinetics of CPAM can be captured by the Elovich model for the inital stage but the combination of pseudo-first-order and pseudo-second-order models for the latter stages,which can be attributed to the long chain of CPAM.With a dosage of 75 g/t,the settling test with Chi-g-CPAM exhibits the same turbidity in the supernatant but a smaller layer thickness of the settlement compared to CPAM.The study enables a better understanding of the flocculation behavior and contributes to the development of efficient flocculants in mineral processing and tailings treatment.
基金Funded by the National Natural Science Foundation of China(No.51778378)the Natural Science Foundation of Hebei Province(No.E2022210103)。
文摘The polyacrylamide which is directly added into concrete shows strong water absorption property.Thus the construction of underwater constructure would demand high amount of water,resulting in poor workability of concrete and strength shrinkage after hardening.Herein,a kind of anionic polyacrylamide(APAM)grafted with water reducing functional group(-COOH)was synthesized at low temperatures by partial factor design and response surface design.The structure and morphology of APAM were characterized by UV,FTIR and SEM methods.The experimental results show that the molecular weight of the synthesized APAM could reach 11 million,under the condition that the temperature was 35℃,the pH value was 8,the monomer concentration was 27wt%,the initiator dosage was 0.6wt%,and the monomer ratio(n(AM):n(AA))was 3.When the APAM was applied into the underwater slurry,it presented good flocculation and low water demand.When the dosage was 1%of the mass of the cement,the water demand increased by 12%,which could meet the self-leveling and anti-dispersity of the underwater slurry at the same time.This technology provides technical guidance for the large-scale industrial production of polyacrylamide for underwater concrete construction while achieving environmental protection during production.
文摘This works aims at preparing at room stable Na2FeO4 and tracking its degradation over time. The synthetic, during this step, was carried out by electrochemical method. The latter was given maximum focus because of its simplicity and the high degree of purity of the resulting product with respect to wet and dry method. This paper reviews the development of the electrochemical method applied to the synthesis of stable at room Na2FeO4, optimizing the parameters impacting the performance of the oxidation of iron(II) in to iron(VI) in alkaline NaOH, saturated at a temperature of 61°C and a current density of 1.4 A/dm2, in order to simplify the synthesis process, to minimize the cost and to improve the production of iron(VI) to meet the growing demand of ferrate(VI) useful for water treatment. The supervision of the degradation of synthesized Na2FeO4 shows its stability over a period of 10 months, which makes storage and transport easier. The phases obtained were characterized by IR spectrometry, X-ray, M?ssbauer, spectroscopy and thermogravimeric analysis.
基金Supported by Scientific Research Foundation of Yunnan Provincial Education Department(09Y0292)~~
文摘[Objective] The technological parameter suitable for the dewatering of dredged sediment from Dianchi Lake was studied.[Method] By means of the treatment method of sewage sludge in sewage treatment plant,flocculants including FeCl3,Al2(SO4)3 and PAM were taken as dewatering agents which were added in dredged sediment.[Result] The results showed that Al2(SO4)3 had better dewatering effect than FeCl3 and PAM,and the optimum dosing quantity of Al2(SO4)3 in dredged sediment was 170 mg/L,in addition,the water quality of supernatant met the first class B standard of GB18918-2002 and could be directly discharged to nature water without pollution.[Conclusion] The study could provide a simple and feasible way for the rapid dewatering of dredged sediment from Dianchi Lake,which would be convenient for the disposal and resource utilization of dredged sediment.
文摘The coagulation flocculation experiments for kaolinite suspension were carried out withpolyaluminurn chloride of various basicities. The rnicroelectrophoresis mobility and adsorption of alu-minum species were determined simultaneously. The quantitative re
