In this paper, two types of silicon（Si） particles ball-milled from n-type Si wafers, respectively, with resistivity values of 1 Ω·cm and 0.001 Ω·cm are deposited with silver（Ag）. The Ag-deposited n-typ...In this paper, two types of silicon（Si） particles ball-milled from n-type Si wafers, respectively, with resistivity values of 1 Ω·cm and 0.001 Ω·cm are deposited with silver（Ag）. The Ag-deposited n-type 1-Ω·cm Si particles（nl-Ag） and Ag-deposited n-type 0.001-Ω·cm Si particles（n0.001-Ag） are separately used as an anode material to assemble coin cells,of which the electrochemical performances are investigated. For the matching of work function between n-type 1-Ω·cm Si（nl） and Ag, nl-Ag shows discharge specific capacity of up to 683 mAh·g^-1 at a current density of 8.4 A·g^-1, which is40% higher than that of n0.001-Ag. Furthermore, the resistivity of nl-Ag is lower than half that of n0.001-Ag. Due to the mismatch of work function between n-type 0.001-Ω·cm Si（n0.001） and Ag, the discharge specific capacity of n0.001-Ag is 250.2 mAh·g^-1 lower than that of nl-Ag after 100 cycles.展开更多
A simple and effective image inpainting method is proposed in this paper, which is proved to be suitable for different kinds of target regions with shapes from little scraps to large unseemly objects in a wide range o...A simple and effective image inpainting method is proposed in this paper, which is proved to be suitable for different kinds of target regions with shapes from little scraps to large unseemly objects in a wide range of images. It is an important improvement upon the traditional image inpainting techniques. By introducing a new bijeetive-mapping term into the matching cost function, the artificial repetition problem in the final inpainting image is practically solved. In addition, by adopting an inpainting error map, not only the target pixels are refined gradually during the inpainting process but also the overlapped target patches are combined more seamlessly than previous method. Finally, the inpainting time is dramatically decreased by using a new acceleration method in the matching process.展开更多
Since the early 2000s, many satellite passive microwave brightness temperature （BT） archives, such as the Advanced Microwave Scanning Radiometer for the Earth Observing System （AMSR-E） BTs, have become the useful ...Since the early 2000s, many satellite passive microwave brightness temperature （BT） archives, such as the Advanced Microwave Scanning Radiometer for the Earth Observing System （AMSR-E） BTs, have become the useful resources for assessing the changes in the surface and deep soil moistures over both arid and semi-arid regions. In this study, we used a new soil effective temperature （T scheme and the archived AMSR-E BTs to estimate surface soil moisture （SM） over the Nagqu region in the central Tibetan Plateau, China. The surface and deep soil temperatures required for the calculation of regional-scale T were obtained from outputs of the Community Land Model version 4.5 （CLM4.5）. In situ SM measurements at the CEOP-CAMP/Tibet （Coordinated Enhanced Observing Period Asia-Australia Monsoon Project on the Tibetan Plateau） experimental sites were used to validate the AMSR-E-based SM estimations at regional and single-site scales. Furthermore, the spatial distribution of monthly mean surface SM over the Nagqu region was obtained from 16 daytime AMSR-E BT observations in July 2004 over the Nagqu region. Results revealed that the AMSR-E-based surface SM estimations agreed well with the in situ-based surface SM measurements, with the root mean square error （RMSE） ranging from 0.042 to 0.066 m3/m3 and the coefficient of determination （R2） ranging from 0.71 to 0.92 during the nighttime and daytime. The regional surface soil water state map showed a clear spatial pattern related to the terrain. It indicated that the lower surface SM values occurred in the mountainous areas of the northern, mid-western and southeastern parts of Nagqu region, while the higher surface SM values appeared in the low elevation areas such as the Tongtian River Basin, Namco Lake and bog meadows in the central part of Nagqu region. Our analysis also showed that the new T^scheme does not require special fitting parameters or additional assumptions, which simplifies the data requirements for regional-scale applications. This scheme combined with the archived satellite passive microwave BT observations can be used to estimate the historical surface SM for hydrological process studies over the Tibetan Plateau regions.展开更多
Ride-sourcing services have become increasingly important in meeting people's mobility needs since their emergence.Compared to traditional street-hailing taxi services,ride-sourcing services significantly reduce t...Ride-sourcing services have become increasingly important in meeting people's mobility needs since their emergence.Compared to traditional street-hailing taxi services,ride-sourcing services significantly reduce the matching frictions in the markets by matching drivers and passengers with relatively distant distances through an online platform.Motivated by this new feature as well as the need for designing operating and regulating strategies,researchers have attempted to describe these innovative ride-sourcing markets through mathematical models,the core of which is the matching functions for characterizing matching frictions.Previous studies have developed a variety of matching functions for ride-sourcing markets,including perfect matching function,Cobb-Douglas type matching function,queuing models,and some physical models.However,less is known about the applicability and performance of these matching functions,that is,under what situations each of these matching functions well characterizes the real market.To address this issue,this paper makes one of the first attempts to calibrate,validate,and compare the prevailing matching functions in the literature,and ascertain the conditions of their applicability.In particular,we establish a simulator to simulate a total of 420 scenarios of the ridesourcing market under different combinations of supply and demand.The key performance metrics,including the matching rate in the market,passengers'average matching time,passengers'average pick-up time,and passengers'average total waiting time,are utilized to test and compare seven widely used matching functions under various market scenarios.展开更多
SiGe is recognised as an excellent thermoelectric material with superior mechanical properties and thermal stability in regions with high temperatures.This study explores a novel strategy for coregulating thermoelectr...SiGe is recognised as an excellent thermoelectric material with superior mechanical properties and thermal stability in regions with high temperatures.This study explores a novel strategy for coregulating thermoelectric transport parameters to achieve high thermoelectric properties of p-type SiGe in the mid-temperature region by incorporating nano-TaC into SiGe combined ball milling with spark plasma sintering.By optimizing the amount of TaC in the SiGe matrix,the power factors were significantly increased due to the modulation doping effect based on the work function matching of SiGe with TaC.Simultaneously,the ensemble effect of the nanostructure leads to a significant decrease in thermal conductivity.Thus,a high ZT of 1.06 was accomplished at 873 K,which is 64%higher than that of typical radioisotope thermoelectric generator.Our research offers a novel strategy for expanding and enhancing the thermoelectric properties of SiGe materials in the medium temperature range.展开更多
基金Project supported by the China Postdoctoral Science Foundation(Grant No.2016M592115)the Jiangxi Postdoctoral Foundation,China(Grant No.2015KY12)+1 种基金the Fund from the Jiangxi Provincial Education Department,China(Grant No.150184)the Fund from Nanchang University,China(Grant No.CX2017006)
文摘In this paper, two types of silicon（Si） particles ball-milled from n-type Si wafers, respectively, with resistivity values of 1 Ω·cm and 0.001 Ω·cm are deposited with silver（Ag）. The Ag-deposited n-type 1-Ω·cm Si particles（nl-Ag） and Ag-deposited n-type 0.001-Ω·cm Si particles（n0.001-Ag） are separately used as an anode material to assemble coin cells,of which the electrochemical performances are investigated. For the matching of work function between n-type 1-Ω·cm Si（nl） and Ag, nl-Ag shows discharge specific capacity of up to 683 mAh·g^-1 at a current density of 8.4 A·g^-1, which is40% higher than that of n0.001-Ag. Furthermore, the resistivity of nl-Ag is lower than half that of n0.001-Ag. Due to the mismatch of work function between n-type 0.001-Ω·cm Si（n0.001） and Ag, the discharge specific capacity of n0.001-Ag is 250.2 mAh·g^-1 lower than that of nl-Ag after 100 cycles.
基金Supported by the National Natural Science Foundation of China （No. 60403044, No. 60373070） and partly funded by Microsoft Research Asia： Project 2004-Image-01.
文摘A simple and effective image inpainting method is proposed in this paper, which is proved to be suitable for different kinds of target regions with shapes from little scraps to large unseemly objects in a wide range of images. It is an important improvement upon the traditional image inpainting techniques. By introducing a new bijeetive-mapping term into the matching cost function, the artificial repetition problem in the final inpainting image is practically solved. In addition, by adopting an inpainting error map, not only the target pixels are refined gradually during the inpainting process but also the overlapped target patches are combined more seamlessly than previous method. Finally, the inpainting time is dramatically decreased by using a new acceleration method in the matching process.
基金supported by the National Natural Science Foundation of China (41575013)the National Supercomputer Center in Guangzhou, China
文摘Since the early 2000s, many satellite passive microwave brightness temperature （BT） archives, such as the Advanced Microwave Scanning Radiometer for the Earth Observing System （AMSR-E） BTs, have become the useful resources for assessing the changes in the surface and deep soil moistures over both arid and semi-arid regions. In this study, we used a new soil effective temperature （T scheme and the archived AMSR-E BTs to estimate surface soil moisture （SM） over the Nagqu region in the central Tibetan Plateau, China. The surface and deep soil temperatures required for the calculation of regional-scale T were obtained from outputs of the Community Land Model version 4.5 （CLM4.5）. In situ SM measurements at the CEOP-CAMP/Tibet （Coordinated Enhanced Observing Period Asia-Australia Monsoon Project on the Tibetan Plateau） experimental sites were used to validate the AMSR-E-based SM estimations at regional and single-site scales. Furthermore, the spatial distribution of monthly mean surface SM over the Nagqu region was obtained from 16 daytime AMSR-E BT observations in July 2004 over the Nagqu region. Results revealed that the AMSR-E-based surface SM estimations agreed well with the in situ-based surface SM measurements, with the root mean square error （RMSE） ranging from 0.042 to 0.066 m3/m3 and the coefficient of determination （R2） ranging from 0.71 to 0.92 during the nighttime and daytime. The regional surface soil water state map showed a clear spatial pattern related to the terrain. It indicated that the lower surface SM values occurred in the mountainous areas of the northern, mid-western and southeastern parts of Nagqu region, while the higher surface SM values appeared in the low elevation areas such as the Tongtian River Basin, Namco Lake and bog meadows in the central part of Nagqu region. Our analysis also showed that the new T^scheme does not require special fitting parameters or additional assumptions, which simplifies the data requirements for regional-scale applications. This scheme combined with the archived satellite passive microwave BT observations can be used to estimate the historical surface SM for hydrological process studies over the Tibetan Plateau regions.
基金partially supported by grants from Hong Kong Research Grants Council under projects HKUST16208619 and HKU15209121a grant from NSFC/RGC Joint Research Scheme under project N HKUST627/18(NSFC-RGC 71861167001).
文摘Ride-sourcing services have become increasingly important in meeting people's mobility needs since their emergence.Compared to traditional street-hailing taxi services,ride-sourcing services significantly reduce the matching frictions in the markets by matching drivers and passengers with relatively distant distances through an online platform.Motivated by this new feature as well as the need for designing operating and regulating strategies,researchers have attempted to describe these innovative ride-sourcing markets through mathematical models,the core of which is the matching functions for characterizing matching frictions.Previous studies have developed a variety of matching functions for ride-sourcing markets,including perfect matching function,Cobb-Douglas type matching function,queuing models,and some physical models.However,less is known about the applicability and performance of these matching functions,that is,under what situations each of these matching functions well characterizes the real market.To address this issue,this paper makes one of the first attempts to calibrate,validate,and compare the prevailing matching functions in the literature,and ascertain the conditions of their applicability.In particular,we establish a simulator to simulate a total of 420 scenarios of the ridesourcing market under different combinations of supply and demand.The key performance metrics,including the matching rate in the market,passengers'average matching time,passengers'average pick-up time,and passengers'average total waiting time,are utilized to test and compare seven widely used matching functions under various market scenarios.
基金supported by National Key Research and Development Program of China(No.2017YFE0198000,2022YFE0119100).National Natural Science Foundation of China(Grant No.U21A2054,52273285,52061009,52262032).Guangxi Science and Technology Project(Grant No.AD21220056).
文摘SiGe is recognised as an excellent thermoelectric material with superior mechanical properties and thermal stability in regions with high temperatures.This study explores a novel strategy for coregulating thermoelectric transport parameters to achieve high thermoelectric properties of p-type SiGe in the mid-temperature region by incorporating nano-TaC into SiGe combined ball milling with spark plasma sintering.By optimizing the amount of TaC in the SiGe matrix,the power factors were significantly increased due to the modulation doping effect based on the work function matching of SiGe with TaC.Simultaneously,the ensemble effect of the nanostructure leads to a significant decrease in thermal conductivity.Thus,a high ZT of 1.06 was accomplished at 873 K,which is 64%higher than that of typical radioisotope thermoelectric generator.Our research offers a novel strategy for expanding and enhancing the thermoelectric properties of SiGe materials in the medium temperature range.
