To increase the gripping area of noncontact end grippers(NCEGs), an array-type NCEG based on the Coanda mechanism is proposed, and its performance in gripping different garment fabrics(GFs) is studied. Firstly, the st...To increase the gripping area of noncontact end grippers(NCEGs), an array-type NCEG based on the Coanda mechanism is proposed, and its performance in gripping different garment fabrics(GFs) is studied. Firstly, the structure and the working mechanism of a single Coanda-based NCEG were analyzed. Secondly, four such grippers were arranged in array to form a minimum gripping unit. Then, the structure of the connecting plate(CP) to the gripper was optimized by simulation analysis to exclude airflow interference, and the adsorption performance of GFs with different fabric parameters was measured. Finally, the experimental results were analyzed to verify the scientific validity and the feasibility of the array-type arrangement. The results show that compared with other NCEGs, the array-type ones based on the Coanda mechanism are better at gripping various large-area GFs and offer better adsorption performance. This innovation provides a new solution to the problem of insufficient gripping area in GF gripping and is very important for improving the production efficiency of garment processing.展开更多
This paper studies on fabrics suitable for child patients’garment in the hospital environment in Hong Kong,China.Subjective measurement was carried out by questionnaire survey to consult medical staff on hospital req...This paper studies on fabrics suitable for child patients’garment in the hospital environment in Hong Kong,China.Subjective measurement was carried out by questionnaire survey to consult medical staff on hospital requirement about fabric criteria for child patients’ garment. On the other hand, objective measurement was conducted by performing laboratory tests on fabrics,which were sourced from commercial fabric market. Both measurements are evaluated according to the results on those fabric criteria in order to determine the most suitable kind of fabric for the end purpose. As a result of the comparison, it was found that T/C 1 scores the highest index. Therefore, it will be suggested for manufacturing child patients’ garment to evaluate the fabric suitability to meet the wearers’ requirement through hospital trial.展开更多
The“cut-and-sewn” pressure garments are normally tailored made in various sizes according to the size of human body as well as the area of burn wounds.When a tubular pressure garment is cut in different length and w...The“cut-and-sewn” pressure garments are normally tailored made in various sizes according to the size of human body as well as the area of burn wounds.When a tubular pressure garment is cut in different length and width measurements,different aspect ratio will be occurred on the elastic fabric for making up the pressuregarment. Many therapists in Hong Kong concerned the change of aspect ratio may affect the tensile properties of the elastic fabric and ultimately will affect the skin-and-garment interface pressure for the patient.The aim展开更多
The mechanical performance of knitted fabric was significantly affected by loop density and geometries. Knitted fabric composites occupy a special position in the field of engineering materials because of their easy t...The mechanical performance of knitted fabric was significantly affected by loop density and geometries. Knitted fabric composites occupy a special position in the field of engineering materials because of their easy to form complex components and high impact energy absorption. But Knitted fabric composites have low in-plane tensile strength because the yarns are in a loop structure in the materials. Sound insulation requirements in automobiles, manufacturing environments, and equipment, generating higher sound pressure drive the need to develop more efficient and economical ways of producing sound absorption materials. The knitted fabric based acoustic materials were produced from cut wastes from different garment industries for their sound absorption property test as per the method described in ASTM E 1050. The acoustic performance of knitted fabrics was measured by independent tube methods for sound waves of 1000-6000 Hz. It is observed that the knitted fabrics acoustic materials prepared from waste materials showed high sound absorption than woven fabrics made from the same synthetic fibers. Moreover, the test revealed that blended knitted fabric had a better sound absorption property.展开更多
Pressure garments are widely used in Hong Kong andmany other countries for burn rehabilitation.Thesegarments are mainly made of elastic Lycra fabrics andtailor-made to individual patient’s measurement toprovide an ap...Pressure garments are widely used in Hong Kong andmany other countries for burn rehabilitation.Thesegarments are mainly made of elastic Lycra fabrics andtailor-made to individual patient’s measurement toprovide an appropriate amount of skin-garment in-terface pressure for medical treatment.However,thefabric tension would be reduced due to fabric elonga-tion under prolonged period of stress,and thus theskin-garment interface pressure cannot be main-tained after repeated use of the garment.This paperaims to study the behaviour of fabric elongation of thefabrics commonly used for making pressure garmentsin U.K.and/or Hong Kong.Attempts to correct theexisting practice of drafting the pressure garments forproviding a more effective clinical treatment.展开更多
基金National Key Research and Development Program of China (No.2018YFB1308801)。
文摘To increase the gripping area of noncontact end grippers(NCEGs), an array-type NCEG based on the Coanda mechanism is proposed, and its performance in gripping different garment fabrics(GFs) is studied. Firstly, the structure and the working mechanism of a single Coanda-based NCEG were analyzed. Secondly, four such grippers were arranged in array to form a minimum gripping unit. Then, the structure of the connecting plate(CP) to the gripper was optimized by simulation analysis to exclude airflow interference, and the adsorption performance of GFs with different fabric parameters was measured. Finally, the experimental results were analyzed to verify the scientific validity and the feasibility of the array-type arrangement. The results show that compared with other NCEGs, the array-type ones based on the Coanda mechanism are better at gripping various large-area GFs and offer better adsorption performance. This innovation provides a new solution to the problem of insufficient gripping area in GF gripping and is very important for improving the production efficiency of garment processing.
文摘This paper studies on fabrics suitable for child patients’garment in the hospital environment in Hong Kong,China.Subjective measurement was carried out by questionnaire survey to consult medical staff on hospital requirement about fabric criteria for child patients’ garment. On the other hand, objective measurement was conducted by performing laboratory tests on fabrics,which were sourced from commercial fabric market. Both measurements are evaluated according to the results on those fabric criteria in order to determine the most suitable kind of fabric for the end purpose. As a result of the comparison, it was found that T/C 1 scores the highest index. Therefore, it will be suggested for manufacturing child patients’ garment to evaluate the fabric suitability to meet the wearers’ requirement through hospital trial.
文摘The“cut-and-sewn” pressure garments are normally tailored made in various sizes according to the size of human body as well as the area of burn wounds.When a tubular pressure garment is cut in different length and width measurements,different aspect ratio will be occurred on the elastic fabric for making up the pressuregarment. Many therapists in Hong Kong concerned the change of aspect ratio may affect the tensile properties of the elastic fabric and ultimately will affect the skin-and-garment interface pressure for the patient.The aim
文摘The mechanical performance of knitted fabric was significantly affected by loop density and geometries. Knitted fabric composites occupy a special position in the field of engineering materials because of their easy to form complex components and high impact energy absorption. But Knitted fabric composites have low in-plane tensile strength because the yarns are in a loop structure in the materials. Sound insulation requirements in automobiles, manufacturing environments, and equipment, generating higher sound pressure drive the need to develop more efficient and economical ways of producing sound absorption materials. The knitted fabric based acoustic materials were produced from cut wastes from different garment industries for their sound absorption property test as per the method described in ASTM E 1050. The acoustic performance of knitted fabrics was measured by independent tube methods for sound waves of 1000-6000 Hz. It is observed that the knitted fabrics acoustic materials prepared from waste materials showed high sound absorption than woven fabrics made from the same synthetic fibers. Moreover, the test revealed that blended knitted fabric had a better sound absorption property.
文摘Pressure garments are widely used in Hong Kong andmany other countries for burn rehabilitation.Thesegarments are mainly made of elastic Lycra fabrics andtailor-made to individual patient’s measurement toprovide an appropriate amount of skin-garment in-terface pressure for medical treatment.However,thefabric tension would be reduced due to fabric elonga-tion under prolonged period of stress,and thus theskin-garment interface pressure cannot be main-tained after repeated use of the garment.This paperaims to study the behaviour of fabric elongation of thefabrics commonly used for making pressure garmentsin U.K.and/or Hong Kong.Attempts to correct theexisting practice of drafting the pressure garments forproviding a more effective clinical treatment.
