An arachidic acid/poly （3, 4-ethylene dioxythiophene） （AA/PEDOT） multilayer Langmuir-Blodgett （LB） film was prepared by a modified LB film method. The theories were utilized to explain the effects between HCl mo...An arachidic acid/poly （3, 4-ethylene dioxythiophene） （AA/PEDOT） multilayer Langmuir-Blodgett （LB） film was prepared by a modified LB film method. The theories were utilized to explain the effects between HCl molecule and LB film. The gas sensitivity mechanism of poly （3, 4-ethylene dioxythiophene） （PEDOT） multilayer film can be explained by the charge transfer between p system of PEDOT and oxidization HCl system. The gas sensitivity of PEDOT LB film deposited interdigital electrode to HCl was tested. The results showed that film thickness, treating temperature, deposition speed had different influence on film gas sensitivity. The AA/PEDOT film deposited device exhibited nonlinear behavior to HCl gas at lower concentration （20-60 ppm） and linear response behavior at higher gas concentration was observed. The time of the compound LB film of the AA/PEDOT responding to the 30 ppm HCl gas is about 20 seconds, which is far quicker than the time of the film to the PEDOTPRESS film（about 80 seconds）. It is not higher film press to better film. When the film press attains 45 mNs/m, the sensitivity of the AA/PEDOT film on the contrary descends.展开更多
One-dimensional (1D) ZnO was prepared through hydrothermal synthesis by cetyltrimethylammonium bromide (CTAB) controling its morphology.The products were characterized by X-ray diffraction (XRD),transmission electron ...One-dimensional (1D) ZnO was prepared through hydrothermal synthesis by cetyltrimethylammonium bromide (CTAB) controling its morphology.The products were characterized by X-ray diffraction (XRD),transmission electron microscopy (TEM) and scanning electron microscopy (SEM).The sintered gas sensor was prepared using ZnO nanorods and its gas sensitivity was measured in static gas atmosphere.The result showed that the ZnO nanorods had lower working temperature than granulated ZnO and had very good sensitivity to 10μg/g trimethylamine (TMA),methanol,ammonia, acetone and ethanol at the working temperature of 170℃.SEM picture revealed that there were many multi-pores in the surface of the sensors.These multi-pores might help to absorb gases and improve the gas sensitivity.展开更多
With the development of science and technology,the scale of industrial production continues to grow,and the types and quantities of gas raw materials used in industrial production and produced during the production pr...With the development of science and technology,the scale of industrial production continues to grow,and the types and quantities of gas raw materials used in industrial production and produced during the production process are also constantly increasing.These gases include flammable and explosive gases,and even contain toxic gases.Therefore,it is very important and necessary for gas sensors to detect and monitor these gases quickly and accurately.In recent years,a new two-dimensional material called MXene has attracted widespread attention in various applications.Their abundant surface functional groups and sites,excellent current conductivity,tunable surface chemistry,and outstanding stability make them promising for gas sensor applications.Since the birth of MXene materials,researchers have utilized the efficient and convenient solution etching preparation,high flexibility,and easily functionalize MXene with other materials to pre-pare composites for gas sensing.This has opened a new chapter in high-performance gas sensing materials and provided a new approach for advanced sensor research.However,previous reviews on MXene-based composite materials in gas sensing only focused on the performance of gas sensing,without systematically explaining the gas sensing mechanisms generated by different gases,as well as summarizing and predicting the advantages and disadvantages of MXene-based composite materials.This article reviews the latest progress in the application of MXene-based composite materials in gas sensing.Firstly,a brief summary was given of the commonly used methods for preparing gas sens-ing device structures,followed by an introduction to the key attributes of MXene related to gas sensing performance.This article focuses on the performance of MXene-based composite materials used for gas sensing,such as MXene/graphene,MXene/Metal oxide,MXene/Transition metal sulfides(TMDs),MXene/Metal-organic framework(MOF),MXene/Polymer.It summarizes the advantages and disadvantages of MXene com-posite materials with different composites and discusses the possible gas sensing mechanisms of MXene-based composite materials for different gases.Finally,future directions and inroads of MXenes-based composites in gas sensing are presented and discussed.展开更多
Precursors for nanostructured SnO2 were synthesized via a microwave-assisted hydrothermal method under different conditions, using SnCI2.2H2 O, urea and citric acid as reactants. After calcination of the pre-cursors a...Precursors for nanostructured SnO2 were synthesized via a microwave-assisted hydrothermal method under different conditions, using SnCI2.2H2 O, urea and citric acid as reactants. After calcination of the pre-cursors at 700 ℃ for 2 h, nanostructured SnO2 with different morphologies were obtained, and were then characterized using X-ray powder diffraction （XRD）, and field-emission scanning electron microscopy （FESEM）. The results show that synthesis temperature and time play an important role in the formation of the 3D hierarchical morphology of the nanostructured SnO2. Gas sensing experiments demonstrate that the synthesized SnO2 materials, especially those with a 3D network structure, exhibit superb sensitivity to alcohol vaoors at 240 ℃.展开更多
A detailed analysis of the electrical response of In0.3Ga0.7As surface quantum dots(SQDs)coupled to 5-layer buried quantum dots(BQDs)is carried out as a function of ethanol and acetone concentration while temperature-...A detailed analysis of the electrical response of In0.3Ga0.7As surface quantum dots(SQDs)coupled to 5-layer buried quantum dots(BQDs)is carried out as a function of ethanol and acetone concentration while temperature-dependent photoluminescence(PL)spectra are also analyzed.The coupling structure is grown by solid source molecular beam epitaxy.Carrier transport from BQDs to SQDs is confirmed by the temperature-dependent PL spectra.The importance of the surface states for the sensing application is once more highlighted.The results show that not only the exposure to the target gas but also the illumination affect the electrical response of the coupling sample strongly.In the ethanol atmosphere and under the illumination,the sheet resistance of the coupling structure decays by 50%while it remains nearly constant for the reference structure with only the 5-layer BQDs but not the SQDs.The strong dependence of the electrical response on the gas concentration makes SQDs very suitable for the development of integrated micrometer-sized gas sensor devices.展开更多
1 Results Polypyrrole (PPy) is a typical conducting polymer with high conductivity and good stability,and has been widely used for detection of gases including ammonia and nitroxide[1].However the reversiblity and sel...1 Results Polypyrrole (PPy) is a typical conducting polymer with high conductivity and good stability,and has been widely used for detection of gases including ammonia and nitroxide[1].However the reversiblity and selectivity of the response to these gases are always not satisfying.In the paper,conductive PPy film was deposited on the interdigital electrode modified by one bilayer of poly(diallyldimethylammonium chloride) and poly(sodium styrenesulfonate),by in-situ polymerization with FeCl3 as oxidizin...展开更多
Binding energies and geometrical and electronic structures for adsorptions of CO and NO on metal M(Pd or Pt)loaded or M and di-vacancy co-decorated(5,5)single-walled carbon nanotubes(M-CNTs or M-V2-CNTs)are studied us...Binding energies and geometrical and electronic structures for adsorptions of CO and NO on metal M(Pd or Pt)loaded or M and di-vacancy co-decorated(5,5)single-walled carbon nanotubes(M-CNTs or M-V2-CNTs)are studied using a GGA-PBE method in the work.The calculated results show that the di-vacancy defect in a perfect(5,5)tube opens the band gap,makes the(5,5)tube transform from a conductor into a semiconductor,and strengthens the adsorption of metal M on the(5,5)tube.For the adsorptions of CO and NO on M-CNT and M-V2-CNT,the CO and NO molecules can be both chemically adsorbed on loaded Pd or Pt atoms due to their active adsorption sites.NO is easily adsorbed on M-V2-CNT because of its electron configuration with a high 2p energy level and its adsorption significantly changes the band gap of M-V2-CNT and makes M-V2-CNT transform from a semiconductor to a conductor.However,the adsorption of CO can not cause the conductivity of M-V2-CNT change.M-V2-CNT has a good sensitivity to the NO gas,suitable as a sensor for detecting the NO gas molecule.In addition,the existence of di-vacancy defect decreases the interaction between CO or NO and Pt-CNT,which will contribute to the desorption of CO and NO gases.The work is expected to provide a theoretical basis for designing NO sensing devices.展开更多
Due to the difficulty in synthesizing perhalogenated metallophthalocyanine, the method of ammonium molybdate solid phase catalysis was introduced, and by using tetrachlorophthalic anhydride and urea as the raw materia...Due to the difficulty in synthesizing perhalogenated metallophthalocyanine, the method of ammonium molybdate solid phase catalysis was introduced, and by using tetrachlorophthalic anhydride and urea as the raw materials, hexadecachloro zinc phthalocyanine （ZnPcCl16） was synthesized. Components of the composite were analyzed by energy spectrum, and its functional group structures and absorption peaks were characterized by IR and UV-vis spectroscopy. The thin films of gas sensors were prepared in a vacuum evaporation system and evaporated onto SiO2 substrates, where sensing electrodes were made by MEMS micromachining. The optimal conditions for the films are： substrate temperature of 150 ℃ evaporation current of 95 A and film thickness of 50 nm. The result showed that the sensors were ideally sensitive to Cl2 gas and could detect the minimum concentration of 0.3 ppm.展开更多
ZnO nanosheets doped with yttrium（Y） were synthesized via a solution combustion method using zinc nitrate and tartaric acid as raw materials.The scanning electron microscopy and X-ray powder diffraction were used to...ZnO nanosheets doped with yttrium（Y） were synthesized via a solution combustion method using zinc nitrate and tartaric acid as raw materials.The scanning electron microscopy and X-ray powder diffraction were used to characterize ZnO nanosheets and the gas sensing properties of them were investigated.The results show that the as-synthesized ZnO nanosheets with diameters of20-100 nm have a wurtzite structure with rough surface.The sensor made from the 2%Y-doped ZnO nanosheets exhibits a stronger response toward 100x10-6（volume fraction） ethanol,its sensitivity at 300℃ is 17.50,and its optimal operating temperature（300℃）is lower than that of the pure ZnO（330℃）.The obvious sensitivity（about 2.5） can be observed at the volume fraction of ethanol as low as 5×10-（-6）,while its the response time is only 2s at 300℃.Moreover,the Y-doped ZnO sensor has a better selectivity to ethanol than other gases.展开更多
Nanocomposites on the base of thin films SnO_2 with additives of metal oxides such as SiO_2,ZrO_2,MnO_2 and others,were prepared by reactive ion-beam sputtering of metal target in the ambient of O_2+At,and then therma...Nanocomposites on the base of thin films SnO_2 with additives of metal oxides such as SiO_2,ZrO_2,MnO_2 and others,were prepared by reactive ion-beam sputtering of metal target in the ambient of O_2+At,and then thermal treated at 500℃.Atomic composition and morphology of thin film nanocomposites were investigated.Electrical properties and gas sensitivity of nanocomposites were studied.It Was determined that the grain size of polycrystals depends on the film composition and can run down to 10 nm.It was found that temperature of maximal gas sensitivity of the films depends on their composition as well and it can be decreased by 100℃～150℃lower than temperature of maximal sensitivity of undoped films SnO_2.展开更多
In this paper, surface photovoltage technique (SPV) was applied to the study of photovoltaic and gas sensitive properties of TCNQ polycrystal. It was found that SPV shows two peaks at 390 nm(P1) and 480 nm (P2) in the...In this paper, surface photovoltage technique (SPV) was applied to the study of photovoltaic and gas sensitive properties of TCNQ polycrystal. It was found that SPV shows two peaks at 390 nm(P1) and 480 nm (P2) in the ultraviolet-visible range. And they are opposite in phase. The results of gaseous adsorption confirm that P, shows the acceptor characteristics, while PI shows that of donor. During adsorption, donor gas interacts with conjugated II * orbital, acceptor gas with the terminal group C=N .展开更多
α-Fe2O3 nanoparticles doped with various molar fractions of Cr^3＋ were synthesized by a forced hydrolysis route and were characterized by X-ray diffraction（XRD）,scanning electronic microscopy（SEM）,X-ray photoele...α-Fe2O3 nanoparticles doped with various molar fractions of Cr^3＋ were synthesized by a forced hydrolysis route and were characterized by X-ray diffraction（XRD）,scanning electronic microscopy（SEM）,X-ray photoelectron spectroscopy（XPS） and inductive coupled plasma（ICP） techniques.The particles reserve shuttle-like shape in the presence of Cr^3＋.The crystallite sizes of Fe2O3 become smaller with the increased Cr^3＋ concentration in solution.The responses of Cr doped α-Fe2O3 sensors were studied towards reducing gases such as ethanol,methanol,acetone,gasoline and n-hexane.Gas sensors based on these materials have higher sensitivities and rapid response/recovery time to alcohol than to hydrocarbon.展开更多
Nanometer sized SnO 2 particles were prepared by a sol gel method using inorganic salt as a precursor material. Its crystallization was investigated by means of TG DTA,IR absorption spectra, X ray diffractometry ...Nanometer sized SnO 2 particles were prepared by a sol gel method using inorganic salt as a precursor material. Its crystallization was investigated by means of TG DTA,IR absorption spectra, X ray diffractometry and TEM as well as its resistivity change and the gas sensitivity varied with temperature were measured in various reducing gas. The results indicate that well crystallized nano sized SnO 2 with size around 15nm can be obtained at annealing temperature 600℃. The activation energy for the growth of nano SnO 2 was calculated to be 26.55kJ.mol 1 when the annealing temperature was higher than 500℃. The measurements also show that there is a peculiar resistance change varied with temperature for nano SnO 2.It has relevance to the increase in surface adsorbed oxygen. The selective detectivities to C 4H 10 and petrol can be increased when ruthenium ion was doped in nano SnO 2 as a catalyst and so do the gas sensitivity to CO,CH 4,H 2 etc. when rhodium ion was doped in.The detection to the several reducing gas can be realized when the temperature ranged from 260℃ to 400℃.展开更多
Fine powders of γ-Fe_2O_3,doped with Y_2O_3,CeO_2,Eu_2O_3 or Tb_2O_3 have been prepared by the chemical co-precipitation method.The sensitivity of gas sensation has been measured with respect to the relative resist- ...Fine powders of γ-Fe_2O_3,doped with Y_2O_3,CeO_2,Eu_2O_3 or Tb_2O_3 have been prepared by the chemical co-precipitation method.The sensitivity of gas sensation has been measured with respect to the relative resist- ance change in the ceramic matrix upon introduction of inflammable gases.The structure of the materials has been studied with X-ray diffraction spectroscopy(XRD),electron diffraction spectroscopy( ED) and transmis- sion electron microscopy(TEM).The addition of rare earth oxides,which improves ceramic microstructure of γ-Fe_2O_3,improves gas sensitivity of γ-Fe_2O_3.The stability can be increased because of the increase of phase transition temperature.In addition,the selectivity of gas sensation of γ-Fe_2O_3 can be improved because of the variation of rare earth oxides.展开更多
China is one of the largest meat producing countries in the wodd. With the growing concern for food safety more attention has been paid to meat quality. The application of conventional test methods for meat quality is...China is one of the largest meat producing countries in the wodd. With the growing concern for food safety more attention has been paid to meat quality. The application of conventional test methods for meat quality is limited by many factors, and subjectiveness, such as longer time to prepare samples and to test. A sensor matrix was constructed with several separate air sensors, and tests were conducted to detect the freshness of the beef. The results show that the air sensors TGS2610, TGS2600, TGS2611, TGS2620 and TGS2602 made by Tianjin Figaro Electronic Co, Ltd could be used to determine the degree of freshness but TGS2442 is not suitable. This study provides a foundation for designing and making an economical and practical detector for beef freshness.展开更多
CO2 flooding is regarded as an important method for enhanced oil recovery （EOR） and greenhouse gas control. However, the heterogeneity prevalently dis- tributed in reservoirs inhibits the performance of this technol...CO2 flooding is regarded as an important method for enhanced oil recovery （EOR） and greenhouse gas control. However, the heterogeneity prevalently dis- tributed in reservoirs inhibits the performance of this technology. The sweep efficiency can be significantly reduced especially in the presence of ＂thief zones＂. Hence, gas channeling blocking and mobility control are important technical issues for the success of CO2 injection. Normally, crosslinked gels have the potential to block gas channels, but the gelation time control poses challenges to this method. In this study, a new method for selectively blocking CO2 channeling is proposed, which is based on a type of CO2-sensitive gel system （modified polyacry- lamide-methenamine-resorcinol gel system） to form gel in situ. A CO2-sensitive gel system is when gelation or solidification will be triggered by CO2 in the reservoir to block gas channels. The CO2-sensitivity of the gel system was demonstrated in parallel bottle tests of gel in N2 and CO2 atmospheres. Sand pack flow experiments were con- ducted to investigate the shutoff capacity of the gel system under different conditions. The injectivity of the gel system was studied via viscosity measurements. The results indi- cate that this gel system was sensitive to CO2 and had good performance of channeling blocking in porous media. Advantageous viscosity-temperature characteristics were achieved in this work. The effectiveness for EOR in heterogeneous formations based on this gel system was demonstrated using displacement tests conducted in double sand packs. The experimental results can provide guideli- nes for the deployment of theCO2-sensitive gel system for field applications.展开更多
<div style="text-align:justify;"> In order to reduce the arson or accidental fire losses, we developed a gas sensitive detector used for the rapid detection and early warning of flammables in crowded p...<div style="text-align:justify;"> In order to reduce the arson or accidental fire losses, we developed a gas sensitive detector used for the rapid detection and early warning of flammables in crowded places such as buses. A MEMS (Micro-Electro-Mechanical System) based thin film semiconductor was fabricated as the gas sensor. To obtain the target gas selective response, the surface of the sensitive film was modified with highly active metal catalytic nano-particles. Thus the anti-interference ability was improved and the false alarm rate was effectively reduced. Furthermore, the modular embedded system for information acquisition and transmission was developed. Supported by the Airflow Precision control system (APs), the rapid warning of volatile gas of flammable substances was realized. Experiments showed that RAs has satisfied selectivity to volatiles of usual flammable liquid, such as the output voltage reaches 3 V (0 - 3.3 V). With simulation about the actual installation state in bus, MWs sounds an alarm at 2 minutes after splashing 50 mL 92# petrol to the floor. For the last two years, FEVMEW has been integrated into more than 4000 buses in Hefei. This design has been proved feasible according to the actual operation. </div>展开更多
The hierarchical ZnO nanostructures with 2-fold symmetrical nanorod arrays on zinc aluminum carbonate （ZnAl-CO3） nanosheets have been successfully synthesized through a two-step hydrothermal process. The primary nan...The hierarchical ZnO nanostructures with 2-fold symmetrical nanorod arrays on zinc aluminum carbonate （ZnAl-CO3） nanosheets have been successfully synthesized through a two-step hydrothermal process. The primary nanosheets, which serve as the lattice-matched substrate for the self-assembly nanorod arrays at the second-step of the hydrothermal route, have been synthesized by using a template of anodic aluminum oxide （AAO）. The as-prepared samples were characterized by XRD, FESEM, TEM and SAED. The nanorods have a diameter of about 100 nm and a length of about 2μ m. A growth mechanism was proposed according to the experimental results. The gas sensor fabricated from ZnO nanorod arrays showed a high sensitivity to ethanol at 230℃. In addition, the response mechanism of the sensors has also been discussed according to the transient response of the gas sensors.展开更多
This work investigated the sensitivity toward humidity, NO2 and H2 of ZnO modified sepiolite （Si12Mg8O30（OH）4.（H2O）4.8H2O）. To this aim, sepiolite powder was first modified by leaching magnesium ions in HCI then...This work investigated the sensitivity toward humidity, NO2 and H2 of ZnO modified sepiolite （Si12Mg8O30（OH）4.（H2O）4.8H2O）. To this aim, sepiolite powder was first modified by leaching magnesium ions in HCI then by precipitating nano-sized Zn-based compounds under basic conditions. A subse- quent thermal treatment at 550 ℃ for 1 h was performed. The powders were characterized by X-ray diffraction （XRD）, specific surface area measurements, thermogravimetric and differential thermal anal- ysis and field emission scanning electron microscopy, as well as high resolution transmission electron microscopy. The XRD patterns showed that all leached heat treated samples were made of anhydrous sepiolite and of ZnO. Sensors were then obtained by screen printing these materials onto commercial alumina substrates with Pt electrodes. All the investigated compositions were capable of detecting NO2 down to ppm level and 20 ppm H2, at an optimal working temperature of 300°C. These detection limits are in line with the current best results reported in literature.展开更多
基金Funded by the National Natural Science Foundation of China (No.60372002)
文摘An arachidic acid/poly （3, 4-ethylene dioxythiophene） （AA/PEDOT） multilayer Langmuir-Blodgett （LB） film was prepared by a modified LB film method. The theories were utilized to explain the effects between HCl molecule and LB film. The gas sensitivity mechanism of poly （3, 4-ethylene dioxythiophene） （PEDOT） multilayer film can be explained by the charge transfer between p system of PEDOT and oxidization HCl system. The gas sensitivity of PEDOT LB film deposited interdigital electrode to HCl was tested. The results showed that film thickness, treating temperature, deposition speed had different influence on film gas sensitivity. The AA/PEDOT film deposited device exhibited nonlinear behavior to HCl gas at lower concentration （20-60 ppm） and linear response behavior at higher gas concentration was observed. The time of the compound LB film of the AA/PEDOT responding to the 30 ppm HCl gas is about 20 seconds, which is far quicker than the time of the film to the PEDOTPRESS film（about 80 seconds）. It is not higher film press to better film. When the film press attains 45 mNs/m, the sensitivity of the AA/PEDOT film on the contrary descends.
文摘One-dimensional (1D) ZnO was prepared through hydrothermal synthesis by cetyltrimethylammonium bromide (CTAB) controling its morphology.The products were characterized by X-ray diffraction (XRD),transmission electron microscopy (TEM) and scanning electron microscopy (SEM).The sintered gas sensor was prepared using ZnO nanorods and its gas sensitivity was measured in static gas atmosphere.The result showed that the ZnO nanorods had lower working temperature than granulated ZnO and had very good sensitivity to 10μg/g trimethylamine (TMA),methanol,ammonia, acetone and ethanol at the working temperature of 170℃.SEM picture revealed that there were many multi-pores in the surface of the sensors.These multi-pores might help to absorb gases and improve the gas sensitivity.
基金supported by the National Natural Science Foundation of China(No.11375136).
文摘With the development of science and technology,the scale of industrial production continues to grow,and the types and quantities of gas raw materials used in industrial production and produced during the production process are also constantly increasing.These gases include flammable and explosive gases,and even contain toxic gases.Therefore,it is very important and necessary for gas sensors to detect and monitor these gases quickly and accurately.In recent years,a new two-dimensional material called MXene has attracted widespread attention in various applications.Their abundant surface functional groups and sites,excellent current conductivity,tunable surface chemistry,and outstanding stability make them promising for gas sensor applications.Since the birth of MXene materials,researchers have utilized the efficient and convenient solution etching preparation,high flexibility,and easily functionalize MXene with other materials to pre-pare composites for gas sensing.This has opened a new chapter in high-performance gas sensing materials and provided a new approach for advanced sensor research.However,previous reviews on MXene-based composite materials in gas sensing only focused on the performance of gas sensing,without systematically explaining the gas sensing mechanisms generated by different gases,as well as summarizing and predicting the advantages and disadvantages of MXene-based composite materials.This article reviews the latest progress in the application of MXene-based composite materials in gas sensing.Firstly,a brief summary was given of the commonly used methods for preparing gas sens-ing device structures,followed by an introduction to the key attributes of MXene related to gas sensing performance.This article focuses on the performance of MXene-based composite materials used for gas sensing,such as MXene/graphene,MXene/Metal oxide,MXene/Transition metal sulfides(TMDs),MXene/Metal-organic framework(MOF),MXene/Polymer.It summarizes the advantages and disadvantages of MXene com-posite materials with different composites and discusses the possible gas sensing mechanisms of MXene-based composite materials for different gases.Finally,future directions and inroads of MXenes-based composites in gas sensing are presented and discussed.
基金supported by the Foundation for Excellent Middle-aged or Young Scientists from Shandong Province under Grants No.BS2009CL029 and No.BS2010CL007supported by National Natural Science Foundation of China(NSFC,No.60906008)the Scientific Research Foundation for Returned Overseas Chinese Scholars from State Education Ministry(SQT 1102)
文摘Precursors for nanostructured SnO2 were synthesized via a microwave-assisted hydrothermal method under different conditions, using SnCI2.2H2 O, urea and citric acid as reactants. After calcination of the pre-cursors at 700 ℃ for 2 h, nanostructured SnO2 with different morphologies were obtained, and were then characterized using X-ray powder diffraction （XRD）, and field-emission scanning electron microscopy （FESEM）. The results show that synthesis temperature and time play an important role in the formation of the 3D hierarchical morphology of the nanostructured SnO2. Gas sensing experiments demonstrate that the synthesized SnO2 materials, especially those with a 3D network structure, exhibit superb sensitivity to alcohol vaoors at 240 ℃.
基金The authors gratefully acknowledge the supports from the National Natural Science Foundation of China(Grant Nos.U1804165 and 61774053)the Project of Henan Provincial Department of Science and Technology(Grant No.182102410047)+1 种基金the Program of Henan Polytechnic University(Grant Nos.NSFRF140116 and B2014-020)the Program of Henan Province Office of Education(Grant No.19B510004).
文摘A detailed analysis of the electrical response of In0.3Ga0.7As surface quantum dots(SQDs)coupled to 5-layer buried quantum dots(BQDs)is carried out as a function of ethanol and acetone concentration while temperature-dependent photoluminescence(PL)spectra are also analyzed.The coupling structure is grown by solid source molecular beam epitaxy.Carrier transport from BQDs to SQDs is confirmed by the temperature-dependent PL spectra.The importance of the surface states for the sensing application is once more highlighted.The results show that not only the exposure to the target gas but also the illumination affect the electrical response of the coupling sample strongly.In the ethanol atmosphere and under the illumination,the sheet resistance of the coupling structure decays by 50%while it remains nearly constant for the reference structure with only the 5-layer BQDs but not the SQDs.The strong dependence of the electrical response on the gas concentration makes SQDs very suitable for the development of integrated micrometer-sized gas sensor devices.
文摘1 Results Polypyrrole (PPy) is a typical conducting polymer with high conductivity and good stability,and has been widely used for detection of gases including ammonia and nitroxide[1].However the reversiblity and selectivity of the response to these gases are always not satisfying.In the paper,conductive PPy film was deposited on the interdigital electrode modified by one bilayer of poly(diallyldimethylammonium chloride) and poly(sodium styrenesulfonate),by in-situ polymerization with FeCl3 as oxidizin...
基金the National Natural Science Foundation(No.51474133)Inner Mongolia Natural Science Foundation(No.2016MS0513)。
文摘Binding energies and geometrical and electronic structures for adsorptions of CO and NO on metal M(Pd or Pt)loaded or M and di-vacancy co-decorated(5,5)single-walled carbon nanotubes(M-CNTs or M-V2-CNTs)are studied using a GGA-PBE method in the work.The calculated results show that the di-vacancy defect in a perfect(5,5)tube opens the band gap,makes the(5,5)tube transform from a conductor into a semiconductor,and strengthens the adsorption of metal M on the(5,5)tube.For the adsorptions of CO and NO on M-CNT and M-V2-CNT,the CO and NO molecules can be both chemically adsorbed on loaded Pd or Pt atoms due to their active adsorption sites.NO is easily adsorbed on M-V2-CNT because of its electron configuration with a high 2p energy level and its adsorption significantly changes the band gap of M-V2-CNT and makes M-V2-CNT transform from a semiconductor to a conductor.However,the adsorption of CO can not cause the conductivity of M-V2-CNT change.M-V2-CNT has a good sensitivity to the NO gas,suitable as a sensor for detecting the NO gas molecule.In addition,the existence of di-vacancy defect decreases the interaction between CO or NO and Pt-CNT,which will contribute to the desorption of CO and NO gases.The work is expected to provide a theoretical basis for designing NO sensing devices.
基金supported by the National Natural Science Foundation of China (No. 60772019)the National High Technology Research andDevelopment program of China (No. 2006AA040101-05)the National Science Foundation for Post-Doctoral Scientists of China (No.20080440839).
文摘Due to the difficulty in synthesizing perhalogenated metallophthalocyanine, the method of ammonium molybdate solid phase catalysis was introduced, and by using tetrachlorophthalic anhydride and urea as the raw materials, hexadecachloro zinc phthalocyanine （ZnPcCl16） was synthesized. Components of the composite were analyzed by energy spectrum, and its functional group structures and absorption peaks were characterized by IR and UV-vis spectroscopy. The thin films of gas sensors were prepared in a vacuum evaporation system and evaporated onto SiO2 substrates, where sensing electrodes were made by MEMS micromachining. The optimal conditions for the films are： substrate temperature of 150 ℃ evaporation current of 95 A and film thickness of 50 nm. The result showed that the sensors were ideally sensitive to Cl2 gas and could detect the minimum concentration of 0.3 ppm.
基金Project(61079010)supported by the National Natural Science Foundation of ChinaProject(3122013P001)supported by the Significant Pre-research Funds of Civil Aviation University of ChinaProject(MHRD20140209)supported by the Science and Technology Innovation Guide Funds of Civil Aviation Administration of China
文摘ZnO nanosheets doped with yttrium（Y） were synthesized via a solution combustion method using zinc nitrate and tartaric acid as raw materials.The scanning electron microscopy and X-ray powder diffraction were used to characterize ZnO nanosheets and the gas sensing properties of them were investigated.The results show that the as-synthesized ZnO nanosheets with diameters of20-100 nm have a wurtzite structure with rough surface.The sensor made from the 2%Y-doped ZnO nanosheets exhibits a stronger response toward 100x10-6（volume fraction） ethanol,its sensitivity at 300℃ is 17.50,and its optimal operating temperature（300℃）is lower than that of the pure ZnO（330℃）.The obvious sensitivity（about 2.5） can be observed at the volume fraction of ethanol as low as 5×10-（-6）,while its the response time is only 2s at 300℃.Moreover,the Y-doped ZnO sensor has a better selectivity to ethanol than other gases.
基金The work was supported by grant of Russian Foundation for Basic Research N 03-02-96453.
文摘Nanocomposites on the base of thin films SnO_2 with additives of metal oxides such as SiO_2,ZrO_2,MnO_2 and others,were prepared by reactive ion-beam sputtering of metal target in the ambient of O_2+At,and then thermal treated at 500℃.Atomic composition and morphology of thin film nanocomposites were investigated.Electrical properties and gas sensitivity of nanocomposites were studied.It Was determined that the grain size of polycrystals depends on the film composition and can run down to 10 nm.It was found that temperature of maximal gas sensitivity of the films depends on their composition as well and it can be decreased by 100℃～150℃lower than temperature of maximal sensitivity of undoped films SnO_2.
文摘In this paper, surface photovoltage technique (SPV) was applied to the study of photovoltaic and gas sensitive properties of TCNQ polycrystal. It was found that SPV shows two peaks at 390 nm(P1) and 480 nm (P2) in the ultraviolet-visible range. And they are opposite in phase. The results of gaseous adsorption confirm that P, shows the acceptor characteristics, while PI shows that of donor. During adsorption, donor gas interacts with conjugated II * orbital, acceptor gas with the terminal group C=N .
基金Supported by the National Natural Science Foundation of China(No.40772026)
文摘α-Fe2O3 nanoparticles doped with various molar fractions of Cr^3＋ were synthesized by a forced hydrolysis route and were characterized by X-ray diffraction（XRD）,scanning electronic microscopy（SEM）,X-ray photoelectron spectroscopy（XPS） and inductive coupled plasma（ICP） techniques.The particles reserve shuttle-like shape in the presence of Cr^3＋.The crystallite sizes of Fe2O3 become smaller with the increased Cr^3＋ concentration in solution.The responses of Cr doped α-Fe2O3 sensors were studied towards reducing gases such as ethanol,methanol,acetone,gasoline and n-hexane.Gas sensors based on these materials have higher sensitivities and rapid response/recovery time to alcohol than to hydrocarbon.
文摘Nanometer sized SnO 2 particles were prepared by a sol gel method using inorganic salt as a precursor material. Its crystallization was investigated by means of TG DTA,IR absorption spectra, X ray diffractometry and TEM as well as its resistivity change and the gas sensitivity varied with temperature were measured in various reducing gas. The results indicate that well crystallized nano sized SnO 2 with size around 15nm can be obtained at annealing temperature 600℃. The activation energy for the growth of nano SnO 2 was calculated to be 26.55kJ.mol 1 when the annealing temperature was higher than 500℃. The measurements also show that there is a peculiar resistance change varied with temperature for nano SnO 2.It has relevance to the increase in surface adsorbed oxygen. The selective detectivities to C 4H 10 and petrol can be increased when ruthenium ion was doped in nano SnO 2 as a catalyst and so do the gas sensitivity to CO,CH 4,H 2 etc. when rhodium ion was doped in.The detection to the several reducing gas can be realized when the temperature ranged from 260℃ to 400℃.
基金The project supported by the National Natural Science Foundation of China
文摘Fine powders of γ-Fe_2O_3,doped with Y_2O_3,CeO_2,Eu_2O_3 or Tb_2O_3 have been prepared by the chemical co-precipitation method.The sensitivity of gas sensation has been measured with respect to the relative resist- ance change in the ceramic matrix upon introduction of inflammable gases.The structure of the materials has been studied with X-ray diffraction spectroscopy(XRD),electron diffraction spectroscopy( ED) and transmis- sion electron microscopy(TEM).The addition of rare earth oxides,which improves ceramic microstructure of γ-Fe_2O_3,improves gas sensitivity of γ-Fe_2O_3.The stability can be increased because of the increase of phase transition temperature.In addition,the selectivity of gas sensation of γ-Fe_2O_3 can be improved because of the variation of rare earth oxides.
文摘China is one of the largest meat producing countries in the wodd. With the growing concern for food safety more attention has been paid to meat quality. The application of conventional test methods for meat quality is limited by many factors, and subjectiveness, such as longer time to prepare samples and to test. A sensor matrix was constructed with several separate air sensors, and tests were conducted to detect the freshness of the beef. The results show that the air sensors TGS2610, TGS2600, TGS2611, TGS2620 and TGS2602 made by Tianjin Figaro Electronic Co, Ltd could be used to determine the degree of freshness but TGS2442 is not suitable. This study provides a foundation for designing and making an economical and practical detector for beef freshness.
基金financial support from the National Basic Research Program of China(2015CB251201)the Fundamental Research Funds for the Central Universities(15CX06024A)the Program for Changjiang Scholars and Innovative Research Team in University(IRT1294 and IRT1086)
文摘CO2 flooding is regarded as an important method for enhanced oil recovery （EOR） and greenhouse gas control. However, the heterogeneity prevalently dis- tributed in reservoirs inhibits the performance of this technology. The sweep efficiency can be significantly reduced especially in the presence of ＂thief zones＂. Hence, gas channeling blocking and mobility control are important technical issues for the success of CO2 injection. Normally, crosslinked gels have the potential to block gas channels, but the gelation time control poses challenges to this method. In this study, a new method for selectively blocking CO2 channeling is proposed, which is based on a type of CO2-sensitive gel system （modified polyacry- lamide-methenamine-resorcinol gel system） to form gel in situ. A CO2-sensitive gel system is when gelation or solidification will be triggered by CO2 in the reservoir to block gas channels. The CO2-sensitivity of the gel system was demonstrated in parallel bottle tests of gel in N2 and CO2 atmospheres. Sand pack flow experiments were con- ducted to investigate the shutoff capacity of the gel system under different conditions. The injectivity of the gel system was studied via viscosity measurements. The results indi- cate that this gel system was sensitive to CO2 and had good performance of channeling blocking in porous media. Advantageous viscosity-temperature characteristics were achieved in this work. The effectiveness for EOR in heterogeneous formations based on this gel system was demonstrated using displacement tests conducted in double sand packs. The experimental results can provide guideli- nes for the deployment of theCO2-sensitive gel system for field applications.
文摘<div style="text-align:justify;"> In order to reduce the arson or accidental fire losses, we developed a gas sensitive detector used for the rapid detection and early warning of flammables in crowded places such as buses. A MEMS (Micro-Electro-Mechanical System) based thin film semiconductor was fabricated as the gas sensor. To obtain the target gas selective response, the surface of the sensitive film was modified with highly active metal catalytic nano-particles. Thus the anti-interference ability was improved and the false alarm rate was effectively reduced. Furthermore, the modular embedded system for information acquisition and transmission was developed. Supported by the Airflow Precision control system (APs), the rapid warning of volatile gas of flammable substances was realized. Experiments showed that RAs has satisfied selectivity to volatiles of usual flammable liquid, such as the output voltage reaches 3 V (0 - 3.3 V). With simulation about the actual installation state in bus, MWs sounds an alarm at 2 minutes after splashing 50 mL 92# petrol to the floor. For the last two years, FEVMEW has been integrated into more than 4000 buses in Hefei. This design has been proved feasible according to the actual operation. </div>
基金Acknowledgements This work was financially supported by the National Natural Science Foundation of China （Grant Nos. 51302118 and 11304131 ）, the Science Foundation of the Education Department of Jiangxi Province （No. GJJ13619）, Science Foundation of Jiangxi Provincial Department of Science and Technology （No. 20142BAB212006）, Jingdezhen Municipal Science and Technology Bureau （103037201）, Open Topics of the State Key Laboratory of Super-hard Materials in Jilin University （201313） and the State Key Laboratory of New Ceramics and Fine Processing in Tsinghua University （KF1211, KF201206）.
文摘The hierarchical ZnO nanostructures with 2-fold symmetrical nanorod arrays on zinc aluminum carbonate （ZnAl-CO3） nanosheets have been successfully synthesized through a two-step hydrothermal process. The primary nanosheets, which serve as the lattice-matched substrate for the self-assembly nanorod arrays at the second-step of the hydrothermal route, have been synthesized by using a template of anodic aluminum oxide （AAO）. The as-prepared samples were characterized by XRD, FESEM, TEM and SAED. The nanorods have a diameter of about 100 nm and a length of about 2μ m. A growth mechanism was proposed according to the experimental results. The gas sensor fabricated from ZnO nanorod arrays showed a high sensitivity to ethanol at 230℃. In addition, the response mechanism of the sensors has also been discussed according to the transient response of the gas sensors.
基金the financial support of Erasmus-Mundus program(FFEEBB project Action 2(scholarship application number L020900787) and EMECW,WELCOME Project Action 2(scholarship application number WELC11011869),Coordination Office:Politecnico di Torino,Turin,Italy,respectively)
文摘This work investigated the sensitivity toward humidity, NO2 and H2 of ZnO modified sepiolite （Si12Mg8O30（OH）4.（H2O）4.8H2O）. To this aim, sepiolite powder was first modified by leaching magnesium ions in HCI then by precipitating nano-sized Zn-based compounds under basic conditions. A subse- quent thermal treatment at 550 ℃ for 1 h was performed. The powders were characterized by X-ray diffraction （XRD）, specific surface area measurements, thermogravimetric and differential thermal anal- ysis and field emission scanning electron microscopy, as well as high resolution transmission electron microscopy. The XRD patterns showed that all leached heat treated samples were made of anhydrous sepiolite and of ZnO. Sensors were then obtained by screen printing these materials onto commercial alumina substrates with Pt electrodes. All the investigated compositions were capable of detecting NO2 down to ppm level and 20 ppm H2, at an optimal working temperature of 300°C. These detection limits are in line with the current best results reported in literature.
