A one-dimensional（1D） fluid model on capacitively coupled radio frequency（RF） argon glow discharge between parallel-plates electrodes at low pressure is established to test the effect of the driving frequency on e...A one-dimensional（1D） fluid model on capacitively coupled radio frequency（RF） argon glow discharge between parallel-plates electrodes at low pressure is established to test the effect of the driving frequency on electron heating. The model is solved numerically by a finite difference method. The numerical results show that the discharge process may be divided into three stages： the growing rapidly stage, the growing slowly stage, and the steady stage. In the steady stage,the maximal electron density increases as the driving frequency increases. The results show that the discharge region has three parts： the powered electrode sheath region, the bulk plasma region and the grounded electrode sheath region. In the growing rapidly stage（at 18 μs）, the results of the cycle-averaged electric field, electron temperature, electron density, and electric potentials for the driving frequencies of 3.39, 6.78, 13.56, and 27.12 MHz are compared, respectively. Furthermore,the results of cycle-averaged electron pressure cooling, electron ohmic heating, electron heating, and electron energy loss for the driving frequencies of 3.39, 6.78, 13.56, and 27.12 MHz are discussed, respectively. It is also found that the effect of the cycle-averaged electron pressure cooling on the electrons is to ＂cool＂ the electrons; the effect of the electron ohmic heating on the electrons is always to ＂heat＂ the electrons; the effect of the cycle-averaged electron ohmic heating on the electrons is stronger than the effect of the cycle-averaged electron pressure cooling on the electrons in the discharge region except in the regions near the electrodes. Therefore, the effect of the cycle-averaged electron heating on the electrons is to ＂heat＂ the electrons in the discharge region except in the regions near the electrodes. However, in the regions near the electrodes, the effect of the cycle-averaged electron heating on the electron is to ＂cool＂ the electrons. Finally, the space distributions of the electron pressure cooling the electron ohmic heating and the electron heating at 1/4 T, 2/4 T, 3/4 T, and 4/4 T in one RF-cycle are presented and compared.展开更多
Heat waves have attracted increasing attention in recent years due to their frequent occurrence.The present study investigates the heat wave intensity and duration in China using daily maximum temperature from 753 wea...Heat waves have attracted increasing attention in recent years due to their frequent occurrence.The present study investigates the heat wave intensity and duration in China using daily maximum temperature from 753 weather stations from 1960 to 2010.In addition,its relationships with soil moisture local forcing on the ten-day period and monthly scales in spring and summer are analyzed using soil moisture data from weather stations and ERA40 reanalysis data.And finally,a mechanistic analysis is carried out using CAM5.1（Community Atmosphere Model,version 5.1） coupled with CLM2（Community Land Model,version 2）.It is found that the heat wave frequency and duration show a sandwich distribution across China,with high occurrence rates in Southeast China and Northwest China,where the maximum frequency and duration exceeded 2.1 times and 9 days per year,respectively.The increasing trends in both duration and intensity occurred to the north of 35°N.The relationships between heat wave frequency in northern China in July（having peak distribution） and soil moisture in the earlier stage（from March to June） and corresponding period（July） are further analyzed,revealing a strong negative correlation in March,June and July,and thus showing that soil moisture in spring and early summer could be an important contributor to heat waves in July via positive subtropical high anomalies.However,the time scales of influence were relatively short in the semi-humid and humid regions,and longer in the arid region.The contribution in the corresponding period took place via positive subtropical high anomalies and positive surface skin temperature and sensible heat flux anomalies.展开更多
An explicitly coupled two-dimensional (2D) multiphysics finite element method (FEM) framework comprised of thermal, phase field, mechanical and electromagnetic (TPME) equations was developed to simulate the conversion...An explicitly coupled two-dimensional (2D) multiphysics finite element method (FEM) framework comprised of thermal, phase field, mechanical and electromagnetic (TPME) equations was developed to simulate the conversion of solid kerogen in oil shale to liquid oil through </span><i><span style="font-family:Verdana;font-size:12px;">in-situ</span></i><span style="font-family:Verdana;font-size:12px;"> pyrolysis by radio frequency heating. Radio frequency heating as a method of <i></span><i><span style="font-family:Verdana;font-size:12px;">in-situ</span></i><span style="font-family:Verdana;font-size:12px;"></i> pyrolysis represents a tenable enhanced oil recovery method, whereby an applied electrical potential difference across a target oil shale formation is converted to thermal energy, heating the oil shale and causing it to liquify to become liquid oil. A number of <i></span><i><span style="font-family:Verdana;font-size:12px;">in-situ</span></i><span style="font-family:Verdana;font-size:12px;"></i> pyrolysis methods are reviewed but the focus of this work is on the verification of the TPME numerical framework to model radio frequency heating as a potential dielectric heating process for enhanced oil recovery.</span></span><span style="font-size:10pt;font-family:""> </span><span style="font-family:Verdana;">Very few studies exist which describe production from oil shale;furthermore, there are none that specifically address the verification of numerical models describing radio frequency heating. As a result, the Method of Manufactured Solutions (MMS) was used as an analytical verification method of the developed numerical code. Results show that the multiphysics finite element framework was adequately modeled enabling the simulation of kerogen conversion to oil as a part of the analysis of a TPME numerical model.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.51172101)
文摘A one-dimensional（1D） fluid model on capacitively coupled radio frequency（RF） argon glow discharge between parallel-plates electrodes at low pressure is established to test the effect of the driving frequency on electron heating. The model is solved numerically by a finite difference method. The numerical results show that the discharge process may be divided into three stages： the growing rapidly stage, the growing slowly stage, and the steady stage. In the steady stage,the maximal electron density increases as the driving frequency increases. The results show that the discharge region has three parts： the powered electrode sheath region, the bulk plasma region and the grounded electrode sheath region. In the growing rapidly stage（at 18 μs）, the results of the cycle-averaged electric field, electron temperature, electron density, and electric potentials for the driving frequencies of 3.39, 6.78, 13.56, and 27.12 MHz are compared, respectively. Furthermore,the results of cycle-averaged electron pressure cooling, electron ohmic heating, electron heating, and electron energy loss for the driving frequencies of 3.39, 6.78, 13.56, and 27.12 MHz are discussed, respectively. It is also found that the effect of the cycle-averaged electron pressure cooling on the electrons is to ＂cool＂ the electrons; the effect of the electron ohmic heating on the electrons is always to ＂heat＂ the electrons; the effect of the cycle-averaged electron ohmic heating on the electrons is stronger than the effect of the cycle-averaged electron pressure cooling on the electrons in the discharge region except in the regions near the electrodes. Therefore, the effect of the cycle-averaged electron heating on the electrons is to ＂heat＂ the electrons in the discharge region except in the regions near the electrodes. However, in the regions near the electrodes, the effect of the cycle-averaged electron heating on the electron is to ＂cool＂ the electrons. Finally, the space distributions of the electron pressure cooling the electron ohmic heating and the electron heating at 1/4 T, 2/4 T, 3/4 T, and 4/4 T in one RF-cycle are presented and compared.
基金supported by the National Natural Science Foundation of China(Grant Nos.41375155 and 91437107)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘Heat waves have attracted increasing attention in recent years due to their frequent occurrence.The present study investigates the heat wave intensity and duration in China using daily maximum temperature from 753 weather stations from 1960 to 2010.In addition,its relationships with soil moisture local forcing on the ten-day period and monthly scales in spring and summer are analyzed using soil moisture data from weather stations and ERA40 reanalysis data.And finally,a mechanistic analysis is carried out using CAM5.1（Community Atmosphere Model,version 5.1） coupled with CLM2（Community Land Model,version 2）.It is found that the heat wave frequency and duration show a sandwich distribution across China,with high occurrence rates in Southeast China and Northwest China,where the maximum frequency and duration exceeded 2.1 times and 9 days per year,respectively.The increasing trends in both duration and intensity occurred to the north of 35°N.The relationships between heat wave frequency in northern China in July（having peak distribution） and soil moisture in the earlier stage（from March to June） and corresponding period（July） are further analyzed,revealing a strong negative correlation in March,June and July,and thus showing that soil moisture in spring and early summer could be an important contributor to heat waves in July via positive subtropical high anomalies.However,the time scales of influence were relatively short in the semi-humid and humid regions,and longer in the arid region.The contribution in the corresponding period took place via positive subtropical high anomalies and positive surface skin temperature and sensible heat flux anomalies.
文摘An explicitly coupled two-dimensional (2D) multiphysics finite element method (FEM) framework comprised of thermal, phase field, mechanical and electromagnetic (TPME) equations was developed to simulate the conversion of solid kerogen in oil shale to liquid oil through </span><i><span style="font-family:Verdana;font-size:12px;">in-situ</span></i><span style="font-family:Verdana;font-size:12px;"> pyrolysis by radio frequency heating. Radio frequency heating as a method of <i></span><i><span style="font-family:Verdana;font-size:12px;">in-situ</span></i><span style="font-family:Verdana;font-size:12px;"></i> pyrolysis represents a tenable enhanced oil recovery method, whereby an applied electrical potential difference across a target oil shale formation is converted to thermal energy, heating the oil shale and causing it to liquify to become liquid oil. A number of <i></span><i><span style="font-family:Verdana;font-size:12px;">in-situ</span></i><span style="font-family:Verdana;font-size:12px;"></i> pyrolysis methods are reviewed but the focus of this work is on the verification of the TPME numerical framework to model radio frequency heating as a potential dielectric heating process for enhanced oil recovery.</span></span><span style="font-size:10pt;font-family:""> </span><span style="font-family:Verdana;">Very few studies exist which describe production from oil shale;furthermore, there are none that specifically address the verification of numerical models describing radio frequency heating. As a result, the Method of Manufactured Solutions (MMS) was used as an analytical verification method of the developed numerical code. Results show that the multiphysics finite element framework was adequately modeled enabling the simulation of kerogen conversion to oil as a part of the analysis of a TPME numerical model.
