Current rates of mental illness are worrisome.Mental illness mainly affects females and younger age groups.The use of the internet to deliver mental health care has been growing since 2020 and includes the implementat...Current rates of mental illness are worrisome.Mental illness mainly affects females and younger age groups.The use of the internet to deliver mental health care has been growing since 2020 and includes the implementation of novel mental health treatments using virtual reality,augmented reality,and artificial intelligence.A new three dimensional digital environment,known as the metaverse,has emerged as the next version of the Internet.Artificial intelligence,augmented reality,and virtual reality will create fully immersive,experiential,and interactive online environments in the metaverse.People will use a unique avatar to do anything they do in their“real”lives,including seeking and receiving mental health care.In this opinion review,we reflect on how the metaverse could reshape how we deliver mental health treatment,its opportunities,and its challenges.展开更多
BACKGROUND Traditional paper-based preoperative patient education is a struggle for new nurses and requires extensive training.In this situation,virtual reality technology can help the new nurses.Despite its potential...BACKGROUND Traditional paper-based preoperative patient education is a struggle for new nurses and requires extensive training.In this situation,virtual reality technology can help the new nurses.Despite its potential benefits,there are studies on patient satisfaction but there is limited information on the usability of virtual reality(VR)technology for new nurses in giving preoperative education to patients.AIM To investigate the impact on satisfaction,usability,and burnout of a system using VR technology in preoperative patient education.METHODS The study involved 20 nurses from the plastic surgery ward and 80 patients admitted between April and May 2019.Each nurse taught four patients:Two using traditional verbal education and two using virtual reality.The System Usability Scale,After-Scenario Questionnaire,and Maslach Burnout Inventory(MBI)were employed to evaluate the impact of these education methods.RESULTS The VR education groups showed a statistically higher satisfaction than the traditional verbal education groups.Among the three subscales of the MBI,emotional exhaustion and personal accomplishment improved statistically significantly.VR was also better in terms of usability.CONCLUSION This study suggests VR enhances usability and reduces burnout in nurses,but further research is needed to assess its impact on depersonalization and objective measures like stress and heart rate.展开更多
Virtual water trade(VWT)provides a new perspective for alleviating water crisis and has thus attracted widespread attention.However,the heterogeneity of virtual water trade inside and outside the river basin and its i...Virtual water trade(VWT)provides a new perspective for alleviating water crisis and has thus attracted widespread attention.However,the heterogeneity of virtual water trade inside and outside the river basin and its influencing factors remains further study.In this study,for better investigating the pattern and heterogeneity of virtual water trade inside and outside provincial regions along the Yellow River Basin in 2015 using the input-output model(MRIO),we proposed two new concepts,i.e.,virtual water surplus and virtual water deficit,and then used the Logarithmic Mean Divisia Index(LMDI)model to identify the inherent mechanism of the imbalance of virtual water trade between provincial regions along the Yellow River Basin and the other four regions in China.The results show that:1)in provincial regions along the Yellow River Basin,the less developed the economy was,the larger the contribution of the agricultural sector in virtual water trade,while the smaller the contribution of the industrial sector.2)Due to the large output of agricultural products,the upstream and midstream provincial regions of the Yellow River Basin had a virtual water surplus,with a net outflow of virtual water of 2.7×10^(8) m^(3) and 0.9×10^(8) m^(3),respectively.3)provincial regions along the Yellow River Basin were in a virtual water deficit with the rest of China,and the decisive factor was the active degree of trade with the outside.This study would be beneficial to illuminate the trade-related water use issues in provincial regions along the Yellow River Basin,which has farreaching practical signific-ance for alleviating water scarcity.展开更多
Ultrahigh-temperature-pressure experiments are crucial for understanding the physical and chemical properties of matter.The recent development of boron-doped diamond(BDD)heaters has made such melting experiments possi...Ultrahigh-temperature-pressure experiments are crucial for understanding the physical and chemical properties of matter.The recent development of boron-doped diamond(BDD)heaters has made such melting experiments possible in large-volume presses.However,estimates of temperatures above 2600 K and of the temperature distributions inside BDD heaters are not well constrained,owing to the lack of a suitable thermometer.Here,we establish a three-dimensional finite element model as a virtual thermometer to estimate the temperature and temperature field above 2600 K.The advantage of this virtual thermometer over those proposed in previous studies is that it considers both alternating and direct current heating modes,the actual sizes of cell assemblies after compression,the effects of the electrode,thermocouple and anvil,and the heat dissipation by the pressure-transmitting medium.The virtual thermometer reproduces the power-temperature relationships of ultrahigh-temperature-pressure experiments below 2600 K at press loads of 2.8-7.9 MN(~19 to 28 GPa)within experimental uncertainties.The temperatures above 2600 K predicted by our virtual thermometer are within the uncertainty of those extrapolated from power-temperature relationships below 2600 K.Furthermore,our model shows that the temperature distribution inside a BDD heater(19-26 K/mm along the radial direction and<83 K/mm along the longitudinal direction)is more homogeneous than those inside conventional heaters such as graphite or LaCrO_(3) heaters(100-200 K/mm).Our study thus provides a reliable virtual thermometer for ultrahigh-temperature experiments using BDD heaters in Earth and material sciences.展开更多
Background Physical entity interactions in mixed reality(MR)environments aim to harness human capabilities in manipulating physical objects,thereby enhancing virtual environment(VEs)functionality.In MR,a common strate...Background Physical entity interactions in mixed reality(MR)environments aim to harness human capabilities in manipulating physical objects,thereby enhancing virtual environment(VEs)functionality.In MR,a common strategy is to use virtual agents as substitutes for physical entities,balancing interaction efficiency with environmental immersion.However,the impact of virtual agent size and form on interaction performance remains unclear.Methods Two experiments were conducted to explore how virtual agent size and form affect interaction performance,immersion,and preference in MR environments.The first experiment assessed five virtual agent sizes(25%,50%,75%,100%,and 125%of physical size).The second experiment tested four types of frames(no frame,consistent frame,half frame,and surrounding frame)across all agent sizes.Participants,utilizing a head mounted display,performed tasks involving moving cups,typing words,and using a mouse.They completed questionnaires assessing aspects such as the virtual environment effects,interaction effects,collision concerns,and preferences.Results Results from the first experiment revealed that agents matching physical object size produced the best overall performance.The second experiment demonstrated that consistent framing notably enhances interaction accuracy and speed but reduces immersion.To balance efficiency and immersion,frameless agents matching physical object sizes were deemed optimal.Conclusions Virtual agents matching physical entity sizes enhance user experience and interaction performance.Conversely,familiar frames from 2D interfaces detrimentally affect interaction and immersion in virtual spaces.This study provides valuable insights for the future development of MR systems.展开更多
This contribution presents a novel wear dependent virtual flow rate sensor for single stage single lobe progressing cavity pumps. We study the wear-induced material loss of the pump components and the impact of this m...This contribution presents a novel wear dependent virtual flow rate sensor for single stage single lobe progressing cavity pumps. We study the wear-induced material loss of the pump components and the impact of this material loss on the volumetric efficiency. The results are combined with an established backflow model to implement a backflow calculation procedure that is adaptive to wear. We use a laboratory test setup with a highly abrasive fluid and operate a pump from new to worn condition to validate our approach. The obtained measurement data show that the presented virtual sensor is capable of calculating the flow rate of a pump being subject to wear during its regular operation.展开更多
In the process of dense vehicles traveling fast,there will be mutual occlusion between vehicles,which will lead to the problem of deterioration of the tracking effect of different vehicles,so this paper proposes a res...In the process of dense vehicles traveling fast,there will be mutual occlusion between vehicles,which will lead to the problem of deterioration of the tracking effect of different vehicles,so this paper proposes a research method of virtual simulation video vehicle target tracking based on you only look once(YOLO)v5s and deep simple online and realtime tracking(DeepSort).Given that the DeepSort algorithm is currently the most effective tracking method,this paper merges the YOLOv5 algorithm with the DeepSort algorithm.Then it adds the efficient channel attention networks(ECA-Net)focusing mechanism at the back for the cross-stage partial bottleneck with 3 convolutions(C3)modules about the YOLOv5 backbone network and before the up-sampling of the Neck feature pyramid.The YOLOv5 algorithm adopts expected intersection over union(EIOU)instead of complete intersection over union(CIOU)as the loss function of the target frame regression.The improved YOLOv5 algorithm is named YOLOv5-Block.The experimental results show that in the special vehicle target detection(TD)and tracking in the virtual simulation environment,The YOLOv5-Block algorithm has an average accuracy(AP)of 99.5%,which significantly improves the target recognition correctness for typical occlusion cases,and is 1.48 times better than the baseline algorithm.After the virtual simulation video sequence test,multiple objects tracking accuracy(MOTA)and various objects tracking precision(MOTP)improved by 10.7 and 1.75 percentage points,respectively,and the number of vehicle target identity document(ID)switches decreased.Compared with recent mainstream vehicle detection and tracking models,the YOLOv5-Block+Deepsort algorithm can accurately and continuously complete the detection and tracking tasks of special vehicle targets in different scenes.展开更多
The traditional nutritional and medical hemp(Cannabis sativa L.)seed protein were explored for the discovery and directional preparation of new xanthine oxidase inhibitory(XOI)peptides by structure-based virtual scree...The traditional nutritional and medical hemp(Cannabis sativa L.)seed protein were explored for the discovery and directional preparation of new xanthine oxidase inhibitory(XOI)peptides by structure-based virtual screening,compound synthesis,in vitro bioassay and proteolysis.Six subtypes of hemp seed edestin and albumin were in silico hydrolyzed by 29 proteases,and 192 encrypted bioactive peptides were screened out.Six peptides showed to be XOI peptides,of which four(about 67%)were released by elastase hydrolysis.The peptide DDNPRRFY displayed the highest XOI activity(IC50=(2.10±0.06)mg/mL),acting as a mixed inhibitor.The pancreatic elastase directionally prepared XOI hemp seed protein hydrolysates,from which 6 high-abundance XOI peptides encrypted 3 virtually-screened ones including the DDNPRRFY.The novel outstanding hemp seed protein-derived XOI peptides and their virtual screening and directed preparation methods provide a promising and applicable approach to conveniently and efficiently explore food-derived bioactive peptides.展开更多
Realization of high performance satellite onboard clock is vital for various positioning, navigation, and timing applications. For further improvement of the synchronization-based satellite time and frequency referenc...Realization of high performance satellite onboard clock is vital for various positioning, navigation, and timing applications. For further improvement of the synchronization-based satellite time and frequency references, we propose a geosynchronous(GEO) satellite virtual clock concept based on ground–satellite synchronization and present a beacon transponder structure for its implementation(scheduled for launch in 2025), which does not require atomic clocks to be mounted on the satellite. Its high performance relies only on minor modifications to the existing transponder structure of GEO satellites. We carefully model the carrier phase link and analyze the factors causing link asymmetry within the special relativity. Considering that performance of such synchronization-based satellite clocks is primarily limited by the link's random phase noise, which cannot be adequately modeled, we design a closed-loop experiment based on commercial GEO satellites for pre-evaluation. This experiment aims at extracting the zero-means random part of the ground-satellite Ku-band carrier phase via a feedback loop. Ultimately, we obtain a 1σ value of 0.633 ps(two-way link), following the Gaussian distribution. From this result, we conclude that the proposed real-time Einstein-synchronization-defined satellite virtual clock can achieve picosecond-level replication of onboard time and frequency.展开更多
The impact sensitivity assessment of spacecraft is to obtain the probability of spacecraft encountering the OD/M(orbital debris or meteoroid),which is a prerequisite for survivability assessment of on-orbit spacecraft...The impact sensitivity assessment of spacecraft is to obtain the probability of spacecraft encountering the OD/M(orbital debris or meteoroid),which is a prerequisite for survivability assessment of on-orbit spacecraft.An impact sensitivity assessment method of spacecraft based on virtual exterior wall was proposed to improve the computational efficiency.This method eliminates determination of the outermost surface elements of the spacecraft before generating the debris rays,which are assumed to originate from a non-concave virtual wall that completely wraps the spacecraft.The Dist Mesh method was adopted for the generating of the virtual wall to ensure its mesh quality.The influences of the sizes,mesh densities,shapes of the virtual wall on the efficiency and accuracy were considered to obtain the best combination of the size and mesh density of the wall and spacecraft.The results of this method were compared with those of S3DE(Survivability of Spacecraft in Space Debris Environment),BUMPER,MDPANTO,ESABASE2/Debris to verify the feasibility of the method.The PCHIP(Piecewise Cubic Hermite Interpolating Polynomial)was used to fit the size vs.flux relationship of the space debris to acquire the impact probability of OD/M with arbitrary size on the spacecraft.展开更多
As computer graphics technology continues to advance,Collision Detection(CD)has emerged as a critical element in fields such as virtual reality,computer graphics,and interactive simulations.CD is indispensable for ens...As computer graphics technology continues to advance,Collision Detection(CD)has emerged as a critical element in fields such as virtual reality,computer graphics,and interactive simulations.CD is indispensable for ensuring the fidelity of physical interactions and the realism of virtual environments,particularly within complex scenarios like virtual assembly,where both high precision and real-time responsiveness are imperative.Despite ongoing developments,current CD techniques often fall short in meeting these stringent requirements,resulting in inefficiencies and inaccuracies that impede the overall performance of virtual assembly systems.To address these limitations,this study introduces a novel algorithm that leverages the capabilities of a Backpropagation Neural Network(BPNN)to optimize the structural composition of the Hybrid Bounding Volume Tree(HBVT).Through this optimization,the research proposes a refined Hybrid Hierarchical Bounding Box(HHBB)framework,which is specifically designed to enhance the computational efficiency and precision of CD processes.The HHBB framework strategically reduces the complexity of collision detection computations,thereby enabling more rapid and accurate responses to collision events.Extensive experimental validation within virtual assembly environments reveals that the proposed algorithm markedly improves the performance of CD,particularly in handling complex models.The optimized HBVT architecture not only accelerates the speed of collision detection but also significantly diminishes error rates,presenting a robust and scalable solution for real-time applications in intricate virtual systems.These findings suggest that the proposed approach offers a substantial advancement in CD technology,with broad implications for its application in virtual reality,computer graphics,and related fields.展开更多
Integration of virtual reality(VR)technology into preoperative patient education has shown potential to improve nursing practice.The study by Kim et al examines the impact of VR on nurse satisfaction,usability,and bur...Integration of virtual reality(VR)technology into preoperative patient education has shown potential to improve nursing practice.The study by Kim et al examines the impact of VR on nurse satisfaction,usability,and burnout.A prospective study involving 20 nurses and 80 patients was conducted,comparing traditional paper-based education with VR-based education in the plastic surgery ward at Chungnam National University Hospital.Findings demonstrated that VR significantly enhanced satisfaction and usability among nurses,while also reducing emotional exhaustion,a critical factor in nurse burnout.Consistency in education quality was also improved,ensuring uniform patient care.These results underscore the importance of VR in reducing the stress of repetitive tasks,improving job satisfaction,and potentially enhancing nurse retention.Future research should explore the broader applications of VR in healthcare and address the logistical challenges of integrating this technology into routine clinical practice.The study by Kim et al highlights VR’s transformative potential in preoperative education for both patients and healthcare providers.展开更多
A catadioptric lens structure,also known as pancake lens,has been widely used in virtual reality(VR)displays to reduce the formfactor.However,the utilization of a half mirror(HM)to fold the optical path thrice leads t...A catadioptric lens structure,also known as pancake lens,has been widely used in virtual reality(VR)displays to reduce the formfactor.However,the utilization of a half mirror(HM)to fold the optical path thrice leads to a significant optical loss.The theoretical maximum optical efficiency is merely 25%.To transcend this optical efficiency constraint while retaining the foldable characteristic inherent to traditional pancake optics,in this paper,we propose a theoretically lossless folded optical system to replace the HM with a nonreciprocal polarization rotator.In our feasibility demonstration experiment,we used a commercial Faraday rotator(FR)and reflective polarizers to replace the lossy HM.The theoretically predicted 100%efficiency can be achieved approximately by using two high-extinction-ratio reflective polarizers.In addition,we evaluated the ghost images using a micro-OLED panel in our imaging system.Indeed,the ghost images can be suppressed to undetectable level if the optics are with antireflection coating.Our novel pancake optical system holds great potential for revolutionizing next-generation VR displays with lightweight,compact formfactor,and low power consumption.展开更多
Background Laparoscopic surgery is a surgical technique in which special instruments are inserted through small incision holes inside the body.For some time,efforts have been made to improve surgical pre training thro...Background Laparoscopic surgery is a surgical technique in which special instruments are inserted through small incision holes inside the body.For some time,efforts have been made to improve surgical pre training through practical exercises on abstracted and reduced models.Methods The authors strive for a portable,easy to use and cost-effective Virtual Reality-based(VR)laparoscopic pre-training platform and therefore address the question of how such a system has to be designed to achieve the quality of today's gold standard using real tissue specimens.Current VR controllers are limited regarding haptic feedback.Since haptic feedback is necessary or at least beneficial for laparoscopic surgery training,the platform to be developed consists of a newly designed prototype laparoscopic VR controller with haptic feedback,a commercially available head-mounted display,a VR environment for simulating a laparoscopic surgery,and a training concept.Results To take full advantage of benefits such as repeatability and cost-effectiveness of VR-based training,the system shall not require a tissue sample for haptic feedback.It is currently calculated and visually displayed to the user in the VR environment.On the prototype controller,a first axis was provided with perceptible feedback for test purposes.Two of the prototype VR controllers can be combined to simulate a typical both-handed use case,e.g.,laparoscopic suturing.A Unity based VR prototype allows the execution of simple standard pre-trainings.Conclusions The first prototype enables full operation of a virtual laparoscopic instrument in VR.In addition,the simulation can compute simple interaction forces.Major challenges lie in a realistic real-time tissue simulation and calculation of forces for the haptic feedback.Mechanical weaknesses were identified in the first hardware prototype,which will be improved in subsequent versions.All degrees of freedom of the controller are to be provided with haptic feedback.To make forces tangible in the simulation,characteristic values need to be determined using real tissue samples.The system has yet to be validated by cross-comparing real and VR haptics with surgeons.展开更多
Medical procedures are inherently invasive and carry the risk of inducing pain to the mind and body.Recently,efforts have been made to alleviate the discomfort associated with invasive medical procedures through the u...Medical procedures are inherently invasive and carry the risk of inducing pain to the mind and body.Recently,efforts have been made to alleviate the discomfort associated with invasive medical procedures through the use of virtual reality(VR)technology.VR has been demonstrated to be an effective treatment for pain associated with medical procedures,as well as for chronic pain conditions for which no effective treatment has been established.The precise mechanism by which the diversion from reality facilitated by VR contributes to the diminution of pain and anxiety has yet to be elucidated.However,the provision of positive images through VR-based visual stimulation may enhance the functionality of brain networks.The salience network is diminished,while the default mode network is enhanced.Additionally,the medial prefrontal cortex may establish a stronger connection with the default mode network,which could result in a reduction of pain and anxiety.Further research into the potential of VR technology to alleviate pain could lead to a reduction in the number of individuals who overdose on painkillers and contribute to positive change in the medical field.展开更多
This paper proposes a virtual position-offset injection based permanent magnet temperature estimation approach for permanent magnet synchronous machines(PMSMs). The concept of virtual position-offset injection is math...This paper proposes a virtual position-offset injection based permanent magnet temperature estimation approach for permanent magnet synchronous machines(PMSMs). The concept of virtual position-offset injection is mathematically transforming the machine model to a virtual frame with a position-offset. The virtual frame temperature estimation model is derived to calculate the permanent magnet temperature(PMT) directly from the measurements with computation efficiency. The estimation model involves a combined inductance term, which can simplify the establishment of saturation compensation model with less measurements. Moreover, resistance and inverter distorted terms are cancelled in the estimation model, which can improve the robustness to the winding temperature rise and inverter distortion. The proposed approach can achieve simplified computation in temperature estimation and reduced memory usage in saturation compensation. While existing model-based approaches could be affected by either the need of resistance and inverter information or complex saturation compensation. Experiments are conducted on the test machine to verify the proposed approach under various operating conditions.展开更多
After perusing the paper by Kim et al,I discovered that this is an interesting manuscript and a successful study.Virtual reality(VR)is an emerging and promising technology employed in the domain of medical practice an...After perusing the paper by Kim et al,I discovered that this is an interesting manuscript and a successful study.Virtual reality(VR)is an emerging and promising technology employed in the domain of medical practice and medical education over the past decade.In the era of big data,VR is constantly progressing in the fields of medical education and clinical diagnosis and treatment.As a novel scientific and technological tool,VR not only overcomes multiple limitations of the traditional medical teaching mode but also reduces the reliance on personnel and equipment.VR can simulate the real clinical situation,stimulate the enthusiasm of young doctors and nurses for clinical study,and simultaneously safeguard and promote medical safety and doctor-patient harmony.Favorable outcomes have been attained in clinical teaching and diagnosis and treatment activities.While enhancing the training conditions of medical cosmetics and elevating the level of clinical practice and teaching,the risks resulting from improper clinical diagnosis and treatment have been circumvented.All of this is evident and comprehensible.展开更多
Objective: Study the contribution of the DIVA 3D dissection table in the teaching of anatomy at the Faculty of Medicine and Odontology of Bamako. Material and Methods: This was a qualitative study carried out from Nov...Objective: Study the contribution of the DIVA 3D dissection table in the teaching of anatomy at the Faculty of Medicine and Odontology of Bamako. Material and Methods: This was a qualitative study carried out from November 1 to December 30, 2023 at the clinical and morphological anatomy laboratory of the Faculty of Medicine and Odontostomatology of Bamako. Included in this study were students who participated in practical and tutorial sessions. The variables studied during this study were: the previous performance of dissection on a cadaver by the students, the opinion of the students on dissection on a cadaver, the replacement of dissection on a cadaver by virtual dissection in the absence of a body, the level student satisfaction. Results: We surveyed 130 participants. The average age was 22 ± 0.2 years with extremes of 17 and 29 years. 95.3% of participants were students. According to 66.7% of participants, virtual dissection is a good palliative in the absence of a corpse. 95.3% of participants found using the virtual dissection table easy with an average of 7.88 ± 1.4. The overall assessment was well rated by 99.3% of participants. Conclusion: According to the results of this study, the virtual dissection table should be improved by integrating commented videos. The use of the DIVA 3D virtual dissection table during practical and tutorial sessions is well appreciated by the students. We believe that the teaching of anatomy using 3D digital technology should be included in the study programs of the Faculty of Medicine and Odontostomatology.展开更多
The power grid is undergoing a transformation from synchronous generators(SGs) toward inverter-based resources(IBRs). The stochasticity, asynchronicity, and limited-inertia characteristics of IBRs bring about challeng...The power grid is undergoing a transformation from synchronous generators(SGs) toward inverter-based resources(IBRs). The stochasticity, asynchronicity, and limited-inertia characteristics of IBRs bring about challenges to grid resilience. Virtual power plants(VPPs) are emerging technologies to improve the grid resilience and advance the transformation. By judiciously aggregating geographically distributed energy resources(DERs) as individual electrical entities, VPPs can provide capacity and ancillary services to grid operations and participate in electricity wholesale markets. This paper aims to provide a concise overview of the concept and development of VPPs and the latest progresses in VPP operation, with the focus on VPP scheduling and control. Based on this overview, we identify a few potential challenges in VPP operation and discuss the opportunities of integrating the multi-agent system(MAS)-based strategy into the VPP operation to enhance its scalability, performance and resilience.展开更多
Virtual synchronous generators(VSGs)are widely introduced to the renewable power generation,the variablespeed pumped storage units,and so on,as a promising gridforming solution.It is noted that VSGs can provide virtua...Virtual synchronous generators(VSGs)are widely introduced to the renewable power generation,the variablespeed pumped storage units,and so on,as a promising gridforming solution.It is noted that VSGs can provide virtual inertia for frequency support,but the larger inertia would worsen the synchronization stability,referring to keeping synchronization with the grid during voltage dips.Thus,this paper presents a transient damping method of VSGs for enhancing the synchronization stability during voltage dips.It is revealed that the loss of synchronization(LOS)of VSGs always accompanies with the positive frequency deviation and the damping is the key factor to remove LOS when the equilibrium point exists.In order to enhance synchronization stability during voltage dips,the transient damping is proposed,which is generated by the frequency deviation in active power loop.Additionally,the proposed method can realize seamless switching between normal state and grid fault.Moreover,detailed control design for transient damping gain is given to ensure the synchronization stability under different inertia requirements during voltage dips.Finally,the experimental results are presented to validate the analysis and the effectiveness of the improved transient damping method.展开更多
基金Supported by Instituto de Salud CarlosⅢ(ISCⅢ),with group funds the Research Network on Chronicity,Primary Care and Health Promotion(RICAPPS,RD21/0016/0005)that is part of the Results-Oriented Cooperative Research Networks in Health(RICORS)(CarlosⅢHealth Institute),co-funded by the European Union“NextGeneration EU/PRTR”funds and with group funds Mental health research group in Primary Care(B17_23R),which is part of the Department of Innovation,Research,and University in the Government of Aragón(Spain).
文摘Current rates of mental illness are worrisome.Mental illness mainly affects females and younger age groups.The use of the internet to deliver mental health care has been growing since 2020 and includes the implementation of novel mental health treatments using virtual reality,augmented reality,and artificial intelligence.A new three dimensional digital environment,known as the metaverse,has emerged as the next version of the Internet.Artificial intelligence,augmented reality,and virtual reality will create fully immersive,experiential,and interactive online environments in the metaverse.People will use a unique avatar to do anything they do in their“real”lives,including seeking and receiving mental health care.In this opinion review,we reflect on how the metaverse could reshape how we deliver mental health treatment,its opportunities,and its challenges.
基金Research Fund of Chungnam National University,Chungnam National University,the Ministry of Trade,Industry,and Energy,Korea,under the“Regional industry-based organization support program”,No.P0001940the Korea Institute for Advancement of Technology,and a grant of the Korea Health Technology R&D Project through the Korea Health Industry Development Institute,funded by the Ministry of Health&Welfare,Republic of Korea,No.HI20C2088.
文摘BACKGROUND Traditional paper-based preoperative patient education is a struggle for new nurses and requires extensive training.In this situation,virtual reality technology can help the new nurses.Despite its potential benefits,there are studies on patient satisfaction but there is limited information on the usability of virtual reality(VR)technology for new nurses in giving preoperative education to patients.AIM To investigate the impact on satisfaction,usability,and burnout of a system using VR technology in preoperative patient education.METHODS The study involved 20 nurses from the plastic surgery ward and 80 patients admitted between April and May 2019.Each nurse taught four patients:Two using traditional verbal education and two using virtual reality.The System Usability Scale,After-Scenario Questionnaire,and Maslach Burnout Inventory(MBI)were employed to evaluate the impact of these education methods.RESULTS The VR education groups showed a statistically higher satisfaction than the traditional verbal education groups.Among the three subscales of the MBI,emotional exhaustion and personal accomplishment improved statistically significantly.VR was also better in terms of usability.CONCLUSION This study suggests VR enhances usability and reduces burnout in nurses,but further research is needed to assess its impact on depersonalization and objective measures like stress and heart rate.
基金Under the auspices of National Natural Science Foundation of China(No.42201302)‘Double First-Class’University Construction Project of Lanzhou University(No.561120213)。
文摘Virtual water trade(VWT)provides a new perspective for alleviating water crisis and has thus attracted widespread attention.However,the heterogeneity of virtual water trade inside and outside the river basin and its influencing factors remains further study.In this study,for better investigating the pattern and heterogeneity of virtual water trade inside and outside provincial regions along the Yellow River Basin in 2015 using the input-output model(MRIO),we proposed two new concepts,i.e.,virtual water surplus and virtual water deficit,and then used the Logarithmic Mean Divisia Index(LMDI)model to identify the inherent mechanism of the imbalance of virtual water trade between provincial regions along the Yellow River Basin and the other four regions in China.The results show that:1)in provincial regions along the Yellow River Basin,the less developed the economy was,the larger the contribution of the agricultural sector in virtual water trade,while the smaller the contribution of the industrial sector.2)Due to the large output of agricultural products,the upstream and midstream provincial regions of the Yellow River Basin had a virtual water surplus,with a net outflow of virtual water of 2.7×10^(8) m^(3) and 0.9×10^(8) m^(3),respectively.3)provincial regions along the Yellow River Basin were in a virtual water deficit with the rest of China,and the decisive factor was the active degree of trade with the outside.This study would be beneficial to illuminate the trade-related water use issues in provincial regions along the Yellow River Basin,which has farreaching practical signific-ance for alleviating water scarcity.
基金supported financially by the National Key R&D Program of China(Grant No.2022YFB3706602)the National Natural Science Foundation of China(Grant Nos.42272041,41902034,and 12011530063)the Jilin University High-Level Innovation Team Foundation,China(Grant No.2021TD-05).
文摘Ultrahigh-temperature-pressure experiments are crucial for understanding the physical and chemical properties of matter.The recent development of boron-doped diamond(BDD)heaters has made such melting experiments possible in large-volume presses.However,estimates of temperatures above 2600 K and of the temperature distributions inside BDD heaters are not well constrained,owing to the lack of a suitable thermometer.Here,we establish a three-dimensional finite element model as a virtual thermometer to estimate the temperature and temperature field above 2600 K.The advantage of this virtual thermometer over those proposed in previous studies is that it considers both alternating and direct current heating modes,the actual sizes of cell assemblies after compression,the effects of the electrode,thermocouple and anvil,and the heat dissipation by the pressure-transmitting medium.The virtual thermometer reproduces the power-temperature relationships of ultrahigh-temperature-pressure experiments below 2600 K at press loads of 2.8-7.9 MN(~19 to 28 GPa)within experimental uncertainties.The temperatures above 2600 K predicted by our virtual thermometer are within the uncertainty of those extrapolated from power-temperature relationships below 2600 K.Furthermore,our model shows that the temperature distribution inside a BDD heater(19-26 K/mm along the radial direction and<83 K/mm along the longitudinal direction)is more homogeneous than those inside conventional heaters such as graphite or LaCrO_(3) heaters(100-200 K/mm).Our study thus provides a reliable virtual thermometer for ultrahigh-temperature experiments using BDD heaters in Earth and material sciences.
基金the Strategic research and consulting project of Chinese Academy of Engineering(2023-HY-14).
文摘Background Physical entity interactions in mixed reality(MR)environments aim to harness human capabilities in manipulating physical objects,thereby enhancing virtual environment(VEs)functionality.In MR,a common strategy is to use virtual agents as substitutes for physical entities,balancing interaction efficiency with environmental immersion.However,the impact of virtual agent size and form on interaction performance remains unclear.Methods Two experiments were conducted to explore how virtual agent size and form affect interaction performance,immersion,and preference in MR environments.The first experiment assessed five virtual agent sizes(25%,50%,75%,100%,and 125%of physical size).The second experiment tested four types of frames(no frame,consistent frame,half frame,and surrounding frame)across all agent sizes.Participants,utilizing a head mounted display,performed tasks involving moving cups,typing words,and using a mouse.They completed questionnaires assessing aspects such as the virtual environment effects,interaction effects,collision concerns,and preferences.Results Results from the first experiment revealed that agents matching physical object size produced the best overall performance.The second experiment demonstrated that consistent framing notably enhances interaction accuracy and speed but reduces immersion.To balance efficiency and immersion,frameless agents matching physical object sizes were deemed optimal.Conclusions Virtual agents matching physical entity sizes enhance user experience and interaction performance.Conversely,familiar frames from 2D interfaces detrimentally affect interaction and immersion in virtual spaces.This study provides valuable insights for the future development of MR systems.
基金Funding by Ministerium für Wirtschaft,Innovation,Digitalisierung und Energie des Landes Nordrhein-Westfalen。
文摘This contribution presents a novel wear dependent virtual flow rate sensor for single stage single lobe progressing cavity pumps. We study the wear-induced material loss of the pump components and the impact of this material loss on the volumetric efficiency. The results are combined with an established backflow model to implement a backflow calculation procedure that is adaptive to wear. We use a laboratory test setup with a highly abrasive fluid and operate a pump from new to worn condition to validate our approach. The obtained measurement data show that the presented virtual sensor is capable of calculating the flow rate of a pump being subject to wear during its regular operation.
基金supported in part by the National Key R&D Program of China under Grant 2022YFB2703304in part by the National Natural Science Foundation of China under Grant 52074064in part by the Fundamental Research Funds for the Central Universities under Grant N2404013,N2404015.
文摘In the process of dense vehicles traveling fast,there will be mutual occlusion between vehicles,which will lead to the problem of deterioration of the tracking effect of different vehicles,so this paper proposes a research method of virtual simulation video vehicle target tracking based on you only look once(YOLO)v5s and deep simple online and realtime tracking(DeepSort).Given that the DeepSort algorithm is currently the most effective tracking method,this paper merges the YOLOv5 algorithm with the DeepSort algorithm.Then it adds the efficient channel attention networks(ECA-Net)focusing mechanism at the back for the cross-stage partial bottleneck with 3 convolutions(C3)modules about the YOLOv5 backbone network and before the up-sampling of the Neck feature pyramid.The YOLOv5 algorithm adopts expected intersection over union(EIOU)instead of complete intersection over union(CIOU)as the loss function of the target frame regression.The improved YOLOv5 algorithm is named YOLOv5-Block.The experimental results show that in the special vehicle target detection(TD)and tracking in the virtual simulation environment,The YOLOv5-Block algorithm has an average accuracy(AP)of 99.5%,which significantly improves the target recognition correctness for typical occlusion cases,and is 1.48 times better than the baseline algorithm.After the virtual simulation video sequence test,multiple objects tracking accuracy(MOTA)and various objects tracking precision(MOTP)improved by 10.7 and 1.75 percentage points,respectively,and the number of vehicle target identity document(ID)switches decreased.Compared with recent mainstream vehicle detection and tracking models,the YOLOv5-Block+Deepsort algorithm can accurately and continuously complete the detection and tracking tasks of special vehicle targets in different scenes.
基金funded by National Natural Science Foundation of China(21868003)Bama County Program for Talents in Science and Technology(BaRenKe20210045).
文摘The traditional nutritional and medical hemp(Cannabis sativa L.)seed protein were explored for the discovery and directional preparation of new xanthine oxidase inhibitory(XOI)peptides by structure-based virtual screening,compound synthesis,in vitro bioassay and proteolysis.Six subtypes of hemp seed edestin and albumin were in silico hydrolyzed by 29 proteases,and 192 encrypted bioactive peptides were screened out.Six peptides showed to be XOI peptides,of which four(about 67%)were released by elastase hydrolysis.The peptide DDNPRRFY displayed the highest XOI activity(IC50=(2.10±0.06)mg/mL),acting as a mixed inhibitor.The pancreatic elastase directionally prepared XOI hemp seed protein hydrolysates,from which 6 high-abundance XOI peptides encrypted 3 virtually-screened ones including the DDNPRRFY.The novel outstanding hemp seed protein-derived XOI peptides and their virtual screening and directed preparation methods provide a promising and applicable approach to conveniently and efficiently explore food-derived bioactive peptides.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFA1402100)。
文摘Realization of high performance satellite onboard clock is vital for various positioning, navigation, and timing applications. For further improvement of the synchronization-based satellite time and frequency references, we propose a geosynchronous(GEO) satellite virtual clock concept based on ground–satellite synchronization and present a beacon transponder structure for its implementation(scheduled for launch in 2025), which does not require atomic clocks to be mounted on the satellite. Its high performance relies only on minor modifications to the existing transponder structure of GEO satellites. We carefully model the carrier phase link and analyze the factors causing link asymmetry within the special relativity. Considering that performance of such synchronization-based satellite clocks is primarily limited by the link's random phase noise, which cannot be adequately modeled, we design a closed-loop experiment based on commercial GEO satellites for pre-evaluation. This experiment aims at extracting the zero-means random part of the ground-satellite Ku-band carrier phase via a feedback loop. Ultimately, we obtain a 1σ value of 0.633 ps(two-way link), following the Gaussian distribution. From this result, we conclude that the proposed real-time Einstein-synchronization-defined satellite virtual clock can achieve picosecond-level replication of onboard time and frequency.
文摘The impact sensitivity assessment of spacecraft is to obtain the probability of spacecraft encountering the OD/M(orbital debris or meteoroid),which is a prerequisite for survivability assessment of on-orbit spacecraft.An impact sensitivity assessment method of spacecraft based on virtual exterior wall was proposed to improve the computational efficiency.This method eliminates determination of the outermost surface elements of the spacecraft before generating the debris rays,which are assumed to originate from a non-concave virtual wall that completely wraps the spacecraft.The Dist Mesh method was adopted for the generating of the virtual wall to ensure its mesh quality.The influences of the sizes,mesh densities,shapes of the virtual wall on the efficiency and accuracy were considered to obtain the best combination of the size and mesh density of the wall and spacecraft.The results of this method were compared with those of S3DE(Survivability of Spacecraft in Space Debris Environment),BUMPER,MDPANTO,ESABASE2/Debris to verify the feasibility of the method.The PCHIP(Piecewise Cubic Hermite Interpolating Polynomial)was used to fit the size vs.flux relationship of the space debris to acquire the impact probability of OD/M with arbitrary size on the spacecraft.
文摘As computer graphics technology continues to advance,Collision Detection(CD)has emerged as a critical element in fields such as virtual reality,computer graphics,and interactive simulations.CD is indispensable for ensuring the fidelity of physical interactions and the realism of virtual environments,particularly within complex scenarios like virtual assembly,where both high precision and real-time responsiveness are imperative.Despite ongoing developments,current CD techniques often fall short in meeting these stringent requirements,resulting in inefficiencies and inaccuracies that impede the overall performance of virtual assembly systems.To address these limitations,this study introduces a novel algorithm that leverages the capabilities of a Backpropagation Neural Network(BPNN)to optimize the structural composition of the Hybrid Bounding Volume Tree(HBVT).Through this optimization,the research proposes a refined Hybrid Hierarchical Bounding Box(HHBB)framework,which is specifically designed to enhance the computational efficiency and precision of CD processes.The HHBB framework strategically reduces the complexity of collision detection computations,thereby enabling more rapid and accurate responses to collision events.Extensive experimental validation within virtual assembly environments reveals that the proposed algorithm markedly improves the performance of CD,particularly in handling complex models.The optimized HBVT architecture not only accelerates the speed of collision detection but also significantly diminishes error rates,presenting a robust and scalable solution for real-time applications in intricate virtual systems.These findings suggest that the proposed approach offers a substantial advancement in CD technology,with broad implications for its application in virtual reality,computer graphics,and related fields.
文摘Integration of virtual reality(VR)technology into preoperative patient education has shown potential to improve nursing practice.The study by Kim et al examines the impact of VR on nurse satisfaction,usability,and burnout.A prospective study involving 20 nurses and 80 patients was conducted,comparing traditional paper-based education with VR-based education in the plastic surgery ward at Chungnam National University Hospital.Findings demonstrated that VR significantly enhanced satisfaction and usability among nurses,while also reducing emotional exhaustion,a critical factor in nurse burnout.Consistency in education quality was also improved,ensuring uniform patient care.These results underscore the importance of VR in reducing the stress of repetitive tasks,improving job satisfaction,and potentially enhancing nurse retention.Future research should explore the broader applications of VR in healthcare and address the logistical challenges of integrating this technology into routine clinical practice.The study by Kim et al highlights VR’s transformative potential in preoperative education for both patients and healthcare providers.
文摘A catadioptric lens structure,also known as pancake lens,has been widely used in virtual reality(VR)displays to reduce the formfactor.However,the utilization of a half mirror(HM)to fold the optical path thrice leads to a significant optical loss.The theoretical maximum optical efficiency is merely 25%.To transcend this optical efficiency constraint while retaining the foldable characteristic inherent to traditional pancake optics,in this paper,we propose a theoretically lossless folded optical system to replace the HM with a nonreciprocal polarization rotator.In our feasibility demonstration experiment,we used a commercial Faraday rotator(FR)and reflective polarizers to replace the lossy HM.The theoretically predicted 100%efficiency can be achieved approximately by using two high-extinction-ratio reflective polarizers.In addition,we evaluated the ghost images using a micro-OLED panel in our imaging system.Indeed,the ghost images can be suppressed to undetectable level if the optics are with antireflection coating.Our novel pancake optical system holds great potential for revolutionizing next-generation VR displays with lightweight,compact formfactor,and low power consumption.
文摘Background Laparoscopic surgery is a surgical technique in which special instruments are inserted through small incision holes inside the body.For some time,efforts have been made to improve surgical pre training through practical exercises on abstracted and reduced models.Methods The authors strive for a portable,easy to use and cost-effective Virtual Reality-based(VR)laparoscopic pre-training platform and therefore address the question of how such a system has to be designed to achieve the quality of today's gold standard using real tissue specimens.Current VR controllers are limited regarding haptic feedback.Since haptic feedback is necessary or at least beneficial for laparoscopic surgery training,the platform to be developed consists of a newly designed prototype laparoscopic VR controller with haptic feedback,a commercially available head-mounted display,a VR environment for simulating a laparoscopic surgery,and a training concept.Results To take full advantage of benefits such as repeatability and cost-effectiveness of VR-based training,the system shall not require a tissue sample for haptic feedback.It is currently calculated and visually displayed to the user in the VR environment.On the prototype controller,a first axis was provided with perceptible feedback for test purposes.Two of the prototype VR controllers can be combined to simulate a typical both-handed use case,e.g.,laparoscopic suturing.A Unity based VR prototype allows the execution of simple standard pre-trainings.Conclusions The first prototype enables full operation of a virtual laparoscopic instrument in VR.In addition,the simulation can compute simple interaction forces.Major challenges lie in a realistic real-time tissue simulation and calculation of forces for the haptic feedback.Mechanical weaknesses were identified in the first hardware prototype,which will be improved in subsequent versions.All degrees of freedom of the controller are to be provided with haptic feedback.To make forces tangible in the simulation,characteristic values need to be determined using real tissue samples.The system has yet to be validated by cross-comparing real and VR haptics with surgeons.
文摘Medical procedures are inherently invasive and carry the risk of inducing pain to the mind and body.Recently,efforts have been made to alleviate the discomfort associated with invasive medical procedures through the use of virtual reality(VR)technology.VR has been demonstrated to be an effective treatment for pain associated with medical procedures,as well as for chronic pain conditions for which no effective treatment has been established.The precise mechanism by which the diversion from reality facilitated by VR contributes to the diminution of pain and anxiety has yet to be elucidated.However,the provision of positive images through VR-based visual stimulation may enhance the functionality of brain networks.The salience network is diminished,while the default mode network is enhanced.Additionally,the medial prefrontal cortex may establish a stronger connection with the default mode network,which could result in a reduction of pain and anxiety.Further research into the potential of VR technology to alleviate pain could lead to a reduction in the number of individuals who overdose on painkillers and contribute to positive change in the medical field.
基金supported in part by the National Natural Science Foundation of China under Grant 52105079 and 62103455。
文摘This paper proposes a virtual position-offset injection based permanent magnet temperature estimation approach for permanent magnet synchronous machines(PMSMs). The concept of virtual position-offset injection is mathematically transforming the machine model to a virtual frame with a position-offset. The virtual frame temperature estimation model is derived to calculate the permanent magnet temperature(PMT) directly from the measurements with computation efficiency. The estimation model involves a combined inductance term, which can simplify the establishment of saturation compensation model with less measurements. Moreover, resistance and inverter distorted terms are cancelled in the estimation model, which can improve the robustness to the winding temperature rise and inverter distortion. The proposed approach can achieve simplified computation in temperature estimation and reduced memory usage in saturation compensation. While existing model-based approaches could be affected by either the need of resistance and inverter information or complex saturation compensation. Experiments are conducted on the test machine to verify the proposed approach under various operating conditions.
文摘After perusing the paper by Kim et al,I discovered that this is an interesting manuscript and a successful study.Virtual reality(VR)is an emerging and promising technology employed in the domain of medical practice and medical education over the past decade.In the era of big data,VR is constantly progressing in the fields of medical education and clinical diagnosis and treatment.As a novel scientific and technological tool,VR not only overcomes multiple limitations of the traditional medical teaching mode but also reduces the reliance on personnel and equipment.VR can simulate the real clinical situation,stimulate the enthusiasm of young doctors and nurses for clinical study,and simultaneously safeguard and promote medical safety and doctor-patient harmony.Favorable outcomes have been attained in clinical teaching and diagnosis and treatment activities.While enhancing the training conditions of medical cosmetics and elevating the level of clinical practice and teaching,the risks resulting from improper clinical diagnosis and treatment have been circumvented.All of this is evident and comprehensible.
文摘Objective: Study the contribution of the DIVA 3D dissection table in the teaching of anatomy at the Faculty of Medicine and Odontology of Bamako. Material and Methods: This was a qualitative study carried out from November 1 to December 30, 2023 at the clinical and morphological anatomy laboratory of the Faculty of Medicine and Odontostomatology of Bamako. Included in this study were students who participated in practical and tutorial sessions. The variables studied during this study were: the previous performance of dissection on a cadaver by the students, the opinion of the students on dissection on a cadaver, the replacement of dissection on a cadaver by virtual dissection in the absence of a body, the level student satisfaction. Results: We surveyed 130 participants. The average age was 22 ± 0.2 years with extremes of 17 and 29 years. 95.3% of participants were students. According to 66.7% of participants, virtual dissection is a good palliative in the absence of a corpse. 95.3% of participants found using the virtual dissection table easy with an average of 7.88 ± 1.4. The overall assessment was well rated by 99.3% of participants. Conclusion: According to the results of this study, the virtual dissection table should be improved by integrating commented videos. The use of the DIVA 3D virtual dissection table during practical and tutorial sessions is well appreciated by the students. We believe that the teaching of anatomy using 3D digital technology should be included in the study programs of the Faculty of Medicine and Odontostomatology.
基金Department of Navy Awards N00014-22-1-2001 and N00014-23-1-2124 issued by the Office of Naval Research。
文摘The power grid is undergoing a transformation from synchronous generators(SGs) toward inverter-based resources(IBRs). The stochasticity, asynchronicity, and limited-inertia characteristics of IBRs bring about challenges to grid resilience. Virtual power plants(VPPs) are emerging technologies to improve the grid resilience and advance the transformation. By judiciously aggregating geographically distributed energy resources(DERs) as individual electrical entities, VPPs can provide capacity and ancillary services to grid operations and participate in electricity wholesale markets. This paper aims to provide a concise overview of the concept and development of VPPs and the latest progresses in VPP operation, with the focus on VPP scheduling and control. Based on this overview, we identify a few potential challenges in VPP operation and discuss the opportunities of integrating the multi-agent system(MAS)-based strategy into the VPP operation to enhance its scalability, performance and resilience.
文摘Virtual synchronous generators(VSGs)are widely introduced to the renewable power generation,the variablespeed pumped storage units,and so on,as a promising gridforming solution.It is noted that VSGs can provide virtual inertia for frequency support,but the larger inertia would worsen the synchronization stability,referring to keeping synchronization with the grid during voltage dips.Thus,this paper presents a transient damping method of VSGs for enhancing the synchronization stability during voltage dips.It is revealed that the loss of synchronization(LOS)of VSGs always accompanies with the positive frequency deviation and the damping is the key factor to remove LOS when the equilibrium point exists.In order to enhance synchronization stability during voltage dips,the transient damping is proposed,which is generated by the frequency deviation in active power loop.Additionally,the proposed method can realize seamless switching between normal state and grid fault.Moreover,detailed control design for transient damping gain is given to ensure the synchronization stability under different inertia requirements during voltage dips.Finally,the experimental results are presented to validate the analysis and the effectiveness of the improved transient damping method.
