Piezoelectric energy harvesting is considered as an ideal power resource for low-power consumption gadgets in vibrational environments.The energy extraction efficiency depends highly on the interface circuit,and shoul...Piezoelectric energy harvesting is considered as an ideal power resource for low-power consumption gadgets in vibrational environments.The energy extraction efficiency depends highly on the interface circuit,and should be highly improved to meet the power requirements.The nonlinear interface circuits in discrete components have been extensively explored and developed with the advantages of easy implementation,stable operation,high efficiency,and low cost.This paper reviews the state-of-the-art progress of nonlinear piezoelectric energy harvesting interface circuits in discrete components.First,the working principles and the advantages/disadvantages of four classical interface circuits are described.Then,the improved circuits based on the four typical circuits and other types of circuits are introduced in detail,and the advantages/disadvantages,output power,efficiency,energy consumption,and practicability of these circuits are analyzed.Finally,the future development trends of nonlinear piezoelectric energy harvesting circuits,e.g.,self-powered extraction,low-power consumption,and broadband characteristic,are predicted.展开更多
One of today's challenges is the integration of ISFETs in chemical and biochemical Microsystems.This article presents a full integration of ISFET chip containing the ISFET/REFET(reference FET) pair,ISFET/REFET amp...One of today's challenges is the integration of ISFETs in chemical and biochemical Microsystems.This article presents a full integration of ISFET chip containing the ISFET/REFET(reference FET) pair,ISFET/REFET amplifiers,bias current generator,as well as a reference electrode structure,all integrated on the same chip based on CMOS technology.The sensor chip was fabricated in a standard 0.35μm CMOS process(Chartered Semiconductor,Singapore).The extra post processing steps have been developed and added for depositing membranes.Finally,the pH response of the integrated sensor was measured with the interface circuit.展开更多
In this paper, two new electronically tunable filter configurations are proposed. The proposed filters operate current-mode (CM), voltage-mode (VM), transimpedance-mode (TIM) and transadmittance-mode (TAM). The first ...In this paper, two new electronically tunable filter configurations are proposed. The proposed filters operate current-mode (CM), voltage-mode (VM), transimpedance-mode (TIM) and transadmittance-mode (TAM). The first configuration realizes second-order VM band-pass and TAM high-pass filter characteristics from the same configuration. The second one realizes second-order TIM band-pass and CM low-pass filter characteristics from the same configuration. They also use minimum number of electronic components (two capacitors and one active component namely;current controlled current difference transconductance amplifier). The workability of the proposed structures has been demonstrated by simulation results.展开更多
Cold-junction compensation(CJC)and disconnection detection circuit design of various thermocouples(TC)and multi-channel TC interface circuits were designed.The CJC and disconnection detection circuit consists of a CJC...Cold-junction compensation(CJC)and disconnection detection circuit design of various thermocouples(TC)and multi-channel TC interface circuits were designed.The CJC and disconnection detection circuit consists of a CJC semiconductor device,an instrumentation amplifier(IA),two resistors,and a diode for disconnection detection.Based on the basic circuit,a multi-channel interface circuit was also implemented.The CJC was implemented using compensation semiconductor and IA,and disconnection detection was detected by using two resistors and a diode so that IA input voltage became-0.42 V.As a result of the experiment using R-type TC,the error of the designed circuit was reduced from 0.14 mV to 3μV after CJC in the temperature range of 0°C to 1400°C.In addition,it was confirmed that the output voltage of IA was saturated from 88 mV to-14.2 V when TC was disconnected from normal.The output voltage of the designed circuit was 0 V to 10 V in the temperature range of 0°C to 1400°C.The results of the 4-channel interface experiment using R-type TC were almost identical to the CJC and disconnection detection results for each channel.The implemented multi-channel interface has a feature that can be applied equally to E,J,K,T,R,and S-type TCs by changing the terminals of CJC semiconductor devices and adjusting the IA gain.展开更多
The superconducting rapid single flux quantum(RSFQ)integrated circuit is a promising solu-tion for overcoming speed and power bottlenecks in high-performance computing systems in the post-Moore era.This paper presents...The superconducting rapid single flux quantum(RSFQ)integrated circuit is a promising solu-tion for overcoming speed and power bottlenecks in high-performance computing systems in the post-Moore era.This paper presents an architecture designed to improve the speed and power limitations of high-performance computing systems using superconducting technology.Since superconducting microprocessors,which operate at cryogenic temperatures,require support from semiconductor cir-cuits,the proposed design utilizes the von Neumann architecture with a superconducting RSFQ mi-croprocessor,cryogenic semiconductor memory,a room temperature field programmable gate array(FPGA)controller,and a host computer for input/output.Additionally,the paper introduces two key circuit designs:a start/stop controllable superconducting clock generator and an asynchronous communication interface between the RSFQ and semiconductor chips used to implement the control system.Experimental results demonstrate that the proposed design is feasible and effective,provi-ding valuable insights for future superconducting computer systems.展开更多
A novel phase-locked loop( PLL)-based closed-loop driving circuit with ultra-low-noise trans-impedance amplifier( TIA) is proposed. The TIA is optimized to achieve ultra-low input-referred current noise. To track driv...A novel phase-locked loop( PLL)-based closed-loop driving circuit with ultra-low-noise trans-impedance amplifier( TIA) is proposed. The TIA is optimized to achieve ultra-low input-referred current noise. To track drive-mode resonant frequency and reduce frequency jitter of actuation voltage,a PLL-based driving technique is adopted. Implemented on printed circuit board( PCB),the proposed driving loop has successfully excited MEMS element into resonance,with a settling time of 3 s. The stable frequency and amplitude of TIA output voltage are 10.14 KHz and 800 mVPP,respectively. With sense-channel electronics,the gyroscope exhibits a scale factor of 0.04 mV/°/s and a bias instability of 57.6°/h,which demonstrates the feasibility of the proposed driving circuit.展开更多
基金the National Natural Science Foundation of China(Nos.51805298 and 12072267)the Natural Science Foundation of Shandong Province of China(No.ZR2019PEE015)+3 种基金the Fundamental Research Funds for the Central Universities of China(No.2019ZRJC006)the 111 Project of China(No.BP0719007)the Innovation Capability Support Plan of Shaanxi Province of China(No.2020KJXX-021)the Young Scholars Program of Shandong University,Weihai of China(No.20820201004)。
文摘Piezoelectric energy harvesting is considered as an ideal power resource for low-power consumption gadgets in vibrational environments.The energy extraction efficiency depends highly on the interface circuit,and should be highly improved to meet the power requirements.The nonlinear interface circuits in discrete components have been extensively explored and developed with the advantages of easy implementation,stable operation,high efficiency,and low cost.This paper reviews the state-of-the-art progress of nonlinear piezoelectric energy harvesting interface circuits in discrete components.First,the working principles and the advantages/disadvantages of four classical interface circuits are described.Then,the improved circuits based on the four typical circuits and other types of circuits are introduced in detail,and the advantages/disadvantages,output power,efficiency,energy consumption,and practicability of these circuits are analyzed.Finally,the future development trends of nonlinear piezoelectric energy harvesting circuits,e.g.,self-powered extraction,low-power consumption,and broadband characteristic,are predicted.
基金supported by National Natural Science Foundation of China(No.90307014)
文摘One of today's challenges is the integration of ISFETs in chemical and biochemical Microsystems.This article presents a full integration of ISFET chip containing the ISFET/REFET(reference FET) pair,ISFET/REFET amplifiers,bias current generator,as well as a reference electrode structure,all integrated on the same chip based on CMOS technology.The sensor chip was fabricated in a standard 0.35μm CMOS process(Chartered Semiconductor,Singapore).The extra post processing steps have been developed and added for depositing membranes.Finally,the pH response of the integrated sensor was measured with the interface circuit.
文摘In this paper, two new electronically tunable filter configurations are proposed. The proposed filters operate current-mode (CM), voltage-mode (VM), transimpedance-mode (TIM) and transadmittance-mode (TAM). The first configuration realizes second-order VM band-pass and TAM high-pass filter characteristics from the same configuration. The second one realizes second-order TIM band-pass and CM low-pass filter characteristics from the same configuration. They also use minimum number of electronic components (two capacitors and one active component namely;current controlled current difference transconductance amplifier). The workability of the proposed structures has been demonstrated by simulation results.
文摘Cold-junction compensation(CJC)and disconnection detection circuit design of various thermocouples(TC)and multi-channel TC interface circuits were designed.The CJC and disconnection detection circuit consists of a CJC semiconductor device,an instrumentation amplifier(IA),two resistors,and a diode for disconnection detection.Based on the basic circuit,a multi-channel interface circuit was also implemented.The CJC was implemented using compensation semiconductor and IA,and disconnection detection was detected by using two resistors and a diode so that IA input voltage became-0.42 V.As a result of the experiment using R-type TC,the error of the designed circuit was reduced from 0.14 mV to 3μV after CJC in the temperature range of 0°C to 1400°C.In addition,it was confirmed that the output voltage of IA was saturated from 88 mV to-14.2 V when TC was disconnected from normal.The output voltage of the designed circuit was 0 V to 10 V in the temperature range of 0°C to 1400°C.The results of the 4-channel interface experiment using R-type TC were almost identical to the CJC and disconnection detection results for each channel.The implemented multi-channel interface has a feature that can be applied equally to E,J,K,T,R,and S-type TCs by changing the terminals of CJC semiconductor devices and adjusting the IA gain.
基金the Strategic Priority Research Program of Chinese Academy of Sciences(No.XDA18000000)the National Natural Science Foundation of China(No.61732018,61872335).
文摘The superconducting rapid single flux quantum(RSFQ)integrated circuit is a promising solu-tion for overcoming speed and power bottlenecks in high-performance computing systems in the post-Moore era.This paper presents an architecture designed to improve the speed and power limitations of high-performance computing systems using superconducting technology.Since superconducting microprocessors,which operate at cryogenic temperatures,require support from semiconductor cir-cuits,the proposed design utilizes the von Neumann architecture with a superconducting RSFQ mi-croprocessor,cryogenic semiconductor memory,a room temperature field programmable gate array(FPGA)controller,and a host computer for input/output.Additionally,the paper introduces two key circuit designs:a start/stop controllable superconducting clock generator and an asynchronous communication interface between the RSFQ and semiconductor chips used to implement the control system.Experimental results demonstrate that the proposed design is feasible and effective,provi-ding valuable insights for future superconducting computer systems.
基金supported by the National Natural Science Foundation of China (grant: 61234007)the subproject of the Very Large Scale Integrated Circuits Manufacturing Equipment and Complete Technology (No.2 National Major Projects of China) (No.: 2013ZX02502-001)
文摘A novel phase-locked loop( PLL)-based closed-loop driving circuit with ultra-low-noise trans-impedance amplifier( TIA) is proposed. The TIA is optimized to achieve ultra-low input-referred current noise. To track drive-mode resonant frequency and reduce frequency jitter of actuation voltage,a PLL-based driving technique is adopted. Implemented on printed circuit board( PCB),the proposed driving loop has successfully excited MEMS element into resonance,with a settling time of 3 s. The stable frequency and amplitude of TIA output voltage are 10.14 KHz and 800 mVPP,respectively. With sense-channel electronics,the gyroscope exhibits a scale factor of 0.04 mV/°/s and a bias instability of 57.6°/h,which demonstrates the feasibility of the proposed driving circuit.
